`http:/host:port/images/load` fails to accept tar with more than one
images however manual load works as expected. Remove explicit check for
`1` image and only fail if result set has value less than `1`.
Signed-off-by: Aditya R <arajan@redhat.com>
Followup to #12919, which merged while I was writing
review feedback. This actually confirms log output.
This required a minor change to the 't' helper: stripping
NUL chars from the http result.
And, while I'm at it, a bunch of cleanup for running rootless:
- set $CONTAINERS_HELPER_BINARY_DIR, so we can find rootlessport
- add a few conditionals for different expectations
Signed-off-by: Ed Santiago <santiago@redhat.com>
Add a regression test for issue #12904 to make sure that attaching with
logs=true to the compact endpoint does not blow up. Note that I did not
find a way to test the output (i.e., '123'); logs are sent in a binary
format and I did not find a way to compare the control characters.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Since this option will also be used for netavark we should rename it to
something more generic. It is important that --cni-config-dir still
works otherwise we could break existing container cleanup commands.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Waiting on an initialized sync.WaitGroup returns immediately.
Hence, move the goroutine to wait and close *after* reading
the logs.
Fixes: #12904
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Improve our compatibility with Docker by better handling the
state strings that we print in `podman ps`. Docker capitalizes
all states in `ps` (we do not) - fix this in our PS code. Also,
stop normalizing ContainerStateConfigured to the "Created" state,
and instead make it always be Created, with the existing Created
state becoming Initialized.
I didn't rename the actual states because I'm somewhat reticent
to make such a large change a day before we leave for break. It's
somewhat confusing that ContainerStateConfigured now returns
Created, but internally and externally we're still consistent.
[NO NEW TESTS NEEDED] existing tests should catch anything that
broke.
I also consider this a breaking change. I will flag appropriately
on Github.
Fixes RHBZ#2010432 and RHBZ#2032561
Signed-off-by: Matthew Heon <mheon@redhat.com>
* Update method/function signatures use the manifest list name and
images associated with the operation explicitly, in general
func f(ctx context.Context, manifestListName string,
ImageNames []string, options *fOptions)
* Leverage gorilla/mux Subrouters to support API v3.x and v4.x for
manifests
* Make manifest API endpoints more RESTful
* Add PUT /manifest/{id} to update existing manifests
* Add manifests.Annotate to go bindings, uncommented unit test
* Add DELETE /manifest/{Id} to remove existing manifest list, use
PUT /manifest/{id} to remove images from a list
* Deprecated POST /manifest/{id}/add and /manifest/{id}/remove, use
PUT /manifest/{id} instead
* Corrected swagger godoc and updated to cover API changes
* Update podman manifest commands to use registry.Context()
* Expose utils.GetVar() to obtain query parameters by name
* Unexpose server.registerSwaggerHandlers, not sure why this was ever
exposed.
* Refactored code to use http.Header instead of map[string]string when
operating on HTTP headers.
* Add API-Version header support in bindings to allow calling explicate
versions of the API. Header is _NOT_ forwarded to the API service.
Signed-off-by: Jhon Honce <jhonce@redhat.com>
The libpod/network packages were moved to c/common so that buildah can
use it as well. To prevent duplication use it in podman as well and
remove it from here.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This option causes Podman to not only remove the specified containers
but all of the containers that depend on the specified
containers.
Fixes: https://github.com/containers/podman/issues/10360
Also ran codespell on the code
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We are hard coding mounts to return nil in compat API,
since we have the data, we should return it.
Fixes: https://github.com/containers/podman/issues/12734
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
For Status = "die", Docker sets the exit code of the container
to a field "exitCode". Podman uses "containerExitCode".
Copy the value into "exitCode" as well, for compatibility.
Signed-off-by: Leah Neukirchen <leah@vuxu.org>
The quay.io/libpod/testimage:20210610 is known not to change and to
remain stable over time. While the same should apply for alpine image
on quay.io/libpod, we've seen it flake and return the wrong image.
The reasons for that observation are unknown.
Fixes: #12631
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
(i.e. not test failures, but actual programming bugs).
We've had a number of syntax errors creep into this test, usually
caused by a missing backslash on a test command. I've long wanted
to 'set -e' but that causes other problems. This PR introduces
error handling via 'trap', with useful diagnostics on failure.
This PR also catches and fixes two previously-unknown bugs that
were causing tests to not actually run.
And, since /events takes eons on my high-uptime laptop, add /since
Signed-off-by: Ed Santiago <santiago@redhat.com>
Some months ago, apiv2 tests got added that needed new
functionality: passing a tarball to the remote server.
There was no mechanism to do so in the 't' helper, so
these tests used complicated (and actually not-really-
working) curl commands.
This PR introduces and documents a new usage of 't', in
which passing an argument ending in '.tar' adds the
right magic syntax (--data-binary @PATH) to the existing
curl. This lets us use all standard 't' checks, making
for simpler tests and in the process fixing some bugs.
Also: drive-by fix of a typo bug in the networks test.
Also: set CONTAINERS_REGISTRIES_CONF when starting server
and when running direct podman, to avoid docker.io throttling.
Signed-off-by: Ed Santiago <santiago@redhat.com>
The Docker-compatible REST API has historically behaved just as the rest
of Podman and Buildah (and the atomic Docker in older RHEL/Fedora) where
`containers-registries.conf` is centrally controlling which registries
a short name may resolve to during pull or local image lookups. Please
refer to a blog for more details [1].
Docker, however, is only resolving short names to docker.io which has
been reported (see #12320) to break certain clients who rely on this
behavior. In order to support this scenario, `containers.conf(5)`
received a new option to control whether Podman's compat API resolves
to docker.io only or behaves as before.
Most endpoints allow for directly normalizing parameters that represent
an image. If set in containers.conf, Podman will then normalize the
references directly to docker.io. The build endpoint is an outlier
since images are also referenced in Dockerfiles. The Buildah API,
however, supports specifying a custom `types.SystemContext` in which
we can set a field that enforces short-name resolution to docker.io
in `c/image/pkg/shortnames`.
Notice that this a "hybrid" approach of doing the normalization directly
in the compat endpoints *and* in `pkg/shortnames` by passing a system
context. Doing such a hybrid approach is neccessary since the compat
and the libpod endpoints share the same `libimage.Runtime` which makes
a global enforcement via the `libimage.Runtime.systemContext`
impossible. Having two separate runtimes for the compat and the libpod
endpoints seems risky and not generally applicable to all endpoints.
[1] https://www.redhat.com/sysadmin/container-image-short-namesFixes: #12320
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Podman has been using catatonit for a number of years already.
Thanks to @giuseppe, catatonit is now able to run as a pause
process which allows us to replace the pause binary entirely.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Implement API query parameter stream and delay for containers and
pods top endpoints
* Update swagger with breaking changes
* Add python API tests for endpoints
Fixes#12115
Signed-off-by: Jhon Honce <jhonce@redhat.com>
The current implementation of the CNI network interface only loads the
networks on the first call and saves them in a map. This is done to safe
performance and not having to reload all configs every time which will be
costly for many networks.
The problem with this approach is that if a network is created by
another process it will not be picked up by the already running podman
process. This is not a problem for the short lived podman commands but
it is problematic for the podman service.
To make sure we always have the actual networks store the mtime of the
config directory. If it changed since the last read we have to read
again.
Fixes#11828
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
podman inspect shows the healthcheck status in `.State.Healthcheck`,
docker uses `.State.Health`. To make sure docker scripts work we
should add the `Health` key. Because we do not want to display both keys
by default we only use the new `Health` key. This is a breaking change
for podman users but matches what docker does. To provide some form of
compatibility users can still use `--format {{.State.Healthcheck}}`. IT
is just not shown by default.
Fixes#11645
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Docker adds the `sha256:` prefix to the image ID, so our compat endpoint
has to do this as well.
Fixes#11623
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Make use of the new network interface in libpod.
This commit contains several breaking changes:
- podman network create only outputs the new network name and not file
path.
- podman network ls shows the network driver instead of the cni version
and plugins.
- podman network inspect outputs the new network struct and not the cni
conflist.
- The bindings and libpod api endpoints have been changed to use the new
network structure.
The container network status is stored in a new field in the state. The
status should be received with the new `c.getNetworkStatus`. This will
migrate the old status to the new format. Therefore old containers should
contine to work correctly in all cases even when network connect/
disconnect is used.
New features:
- podman network reload keeps the ip and mac for more than one network.
- podman container restore keeps the ip and mac for more than one
network.
- The network create compat endpoint can now use more than one ipam
config.
The man pages and the swagger doc are updated to reflect the latest
changes.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When `?all=garbage` is passed to an API endpoint schema validation fails
and err is nil. Wrapf uses err to create an error message causing a nil
pointer dereference.
Signed-off-by: Jelle van der Waa <jvanderwaa@redhat.com>
* Follow https://pkg.go.dev/cmd/go#hdr-Generate_Go_files_by_processing_source
for leading comment
* Add godoc strings for all exposed methods for IDE support
* Copy field godoc strings into generated code as function godoc string
* Remove unused/unnecessary fields from generator.go structures
* Cleanup code regarding template usage
Signed-off-by: Jhon Honce <jhonce@redhat.com>
* To aid in debugging log API request and response bodies at trace
level. Events can be correlated using the X-Reference-Id.
* Server now echos X-Reference-Id from client if set, otherwise
generates an unique id.
* Move logic for X-Reference-Id into middleware
* Change uses of Header.Add() to Set() when setting Content-Type
* Log API operations in Apache format using gorilla middleware
* Port server code to use BaseContext and ConnContext
Fixes#10053
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Filtering is missing in both compat API and libpod API, while docker
has filtering functinality. This commit enables filtering option using
name and id in both libpod and http API.
Signed-off-by: Jakub Guzik <jakubmguzik@gmail.com>
Endpoint /build logs an info entry when a client uses the wrong
Content-Type for build payload. Given Content-Type is ignored and
assumed to be "application/x-tar".
Endpoint /libpod/build will fail unless "application/x-tar" or
"application/tar" is given for Content-Type. "application/tar" will
be logged as an info entry.
Fixes#11012
Signed-off-by: Jhon Honce <jhonce@redhat.com>
This commit adds additional until filter to podman pod ps (ls/list).
Additionally, it also adds descriptions for podman pod ps filters available
via http api.
Signed-off-by: Jakub Guzik <jakubmguzik@gmail.com>
Daniel J Walsh
Aditya R
OpenShift Merge Robot
Ed Santiago
Valentin Rothberg
Paul Holzinger
Matthew Heon
Jhon Honce
Leah Neukirchen
Oliver
Ananth Bhaskararaman
Ambrose Chua
Matej Vasek
Jelle van der Waa
Jason T. Greene
Jakub Guzik
openshift-ci[bot]
Milivoje Legenovic