the rootless container storage is always mounted in a different mount
namespace, owned by the unprivileged user. Even if it is mounted, a
process running in another namespace cannot reuse the already mounted
storage.
Make sure the storage is always cleaned up once the container
terminates.
This has worked with vfs since there is no real mounted storage.
Closes: https://github.com/containers/libpod/issues/2112
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Avoid generating
quay.io/openshift-release-dev/ocp-release@sha256@sha256:239... and
similar when the image name is already digest-based [1]. It's not
clear exactly how we get into this state, but as shown by the unit
tests, the new code handles this case correctly (while the previous
code does not).
[1]: https://github.com/containers/libpod/issues/2086
Signed-off-by: W. Trevor King <wking@tremily.us>
Closes: #2106
Approved by: rhatdan
Apply the default AppArmor profile at container initialization to cover
all possible code paths (i.e., podman-{start,run}) before executing the
runtime. This allows moving most of the logic into pkg/apparmor.
Also make the loading and application of the default AppArmor profile
versio-indepenent by checking for the `libpod-default-` prefix and
over-writing the profile in the run-time spec if needed.
The intitial run-time spec of the container differs a bit from the
applied one when having started the container, which results in
displaying a potentially outdated AppArmor profile when inspecting
a container. To fix that, load the container config from the file
system if present and use it to display the data.
Fixes: #2107
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The initial implementation to request the same IP address for a
container during a restore was based on environment variables
influencing CNI.
With this commit the IP address selection switches to Podman's internal
static IP API.
This commit does a comment change in libpod/container_easyjson.go to
avoid unnecessary re-generation of libpod/container_easyjson.go during
build as this fails in CI. The reason for this is that make sees that
libpod/container_easyjson.go needs to be re-created. The commit,
however, only changes a part of libpod/container.go which is marked as
'ffjson: skip'.
Signed-off-by: Adrian Reber <areber@redhat.com>
Restoring a container from a checkpoint should give the container the
same IP as before checkpointing. This adds a test to make sure the IP
stays the same.
Signed-off-by: Adrian Reber <areber@redhat.com>
For example:
$ cat /etc/containers/oci/hooks.d/test.json
{
"version": "1.0.0",
"hook": {
"path": "/bin/sh",
"args": ["sh", "-c", "echo 'oh, noes!' >&2; exit 1"]
},
"when": {
"always": true
},
"stages": ["precreate"]
}
$ podman run --rm docker.io/library/alpine echo 'successful container'
error setting up OCI Hooks: executing [sh -c echo 'oh, noes!' >&2; exit 1]: exit status 1
The rendered command isn't in in the right syntax for copy/pasting
into a shell, but it should be enough for the user to be able to
locate the failing hook. They'll need to know their hook directories,
but with the previous commits requiring explicit hook directories it's
more likely that the caller is aware of them. And if they run at a
debug level, they can see the lookups in the logs:
$ podman --log-level=debug --hooks-dir=/etc/containers/oci/hooks.d run --rm docker.io/library/alpine echo 'successful container' 2>&1 | grep -i hook
time="2018-12-02T22:15:16-08:00" level=debug msg="reading hooks from /etc/containers/oci/hooks.d"
time="2018-12-02T22:15:16-08:00" level=debug msg="added hook /etc/containers/oci/hooks.d/test.json"
time="2018-12-02T22:15:16-08:00" level=debug msg="hook test.json matched; adding to stages [precreate]"
time="2018-12-02T22:15:16-08:00" level=warning msg="container 3695c6ba0cc961918bd3e4a769c52bd08b82afea5cd79e9749e9c7a63b5e7100: precreate hook: executing [sh -c echo 'oh, noes!' >&2; exit 1]: exit status 1"
time="2018-12-02T22:15:16-08:00" level=error msg="error setting up OCI Hooks: executing [sh -c echo 'oh, noes!' >&2; exit 1]: exit status 1"
Signed-off-by: W. Trevor King <wking@tremily.us>
To make it easier to notice and track down errors (or other surprising
behavior) due to precreate hooks. With this commit, the logged
messages look like:
time="2018-11-19T13:35:18-08:00" level=debug msg="precreate hook 0 made configuration changes:
--- Old
+++ New
@@ -18,3 +18,3 @@
Namespaces: ([]specs.LinuxNamespace) <nil>,
- Devices: ([]specs.LinuxDevice) (len=1) {
+ Devices: ([]specs.LinuxDevice) (len=2) {
(specs.LinuxDevice) {
@@ -24,2 +24,11 @@
Minor: (int64) 229,
+ FileMode: (*os.FileMode)(-rw-------),
+ UID: (*uint32)(0),
+ GID: (*uint32)(0)
+ },
+ (specs.LinuxDevice) {
+ Path: (string) (len=8) "/dev/sda",
+ Type: (string) (len=1) "b",
+ Major: (int64) 8,
+ Minor: (int64) 0,
FileMode: (*os.FileMode)(-rw-------),
"
time="2018-11-19T13:35:18-08:00" level=debug msg="precreate hook 1 made configuration changes:
--- Old
+++ New
@@ -29,3 +29,3 @@
(specs.LinuxDevice) {
- Path: (string) (len=8) "/dev/sda",
+ Path: (string) (len=8) "/dev/sdb",
Type: (string) (len=1) "b",
"
Ideally those logs would include the container ID, but we don't have
access to that down at this level. I'm not sure if it's worth
teaching RuntimeConfigFilter to accept a *logrus.Entry (so the caller
could use WithFields [1]) or to use a generic logging interface (like
go-log [2]). For now, I've left the container ID unlogged here.
The spew/difflib implementation is based on stretchr/testify/assert,
but I think the ~10 lines I'm borrowing are probably small enough to
stay under the "all copies or substantial portions" condition in its
MIT license.
[1]: https://godoc.org/github.com/sirupsen/logrus#WithFields
[2]: https://github.com/go-log/log
Signed-off-by: W. Trevor King <wking@tremily.us>
There's been a lot of discussion over in [1] about how to support the
NVIDIA folks and others who want to be able to create devices
(possibly after having loaded kernel modules) and bind userspace
libraries into the container. Currently that's happening in the
middle of runc's create-time mount handling before the container
pivots to its new root directory with runc's incorrectly-timed
prestart hook trigger [2]. With this commit, we extend hooks with a
'precreate' stage to allow trusted parties to manipulate the config
JSON before calling the runtime's 'create'.
I'm recycling the existing Hook schema from pkg/hooks for this,
because we'll want Timeout for reliability and When to avoid the
expense of fork/exec when a given hook does not need to make config
changes [3].
[1]: https://github.com/opencontainers/runc/pull/1811
[2]: https://github.com/opencontainers/runc/issues/1710
[3]: https://github.com/containers/libpod/issues/1828#issuecomment-439888059
Signed-off-by: W. Trevor King <wking@tremily.us>
In podman 0.12.0 we have invalid completions. These should have been
caught during testing. This check will throw an error if the completions
do not successfully execute.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The --sig-proxy option in both 'podman attach' and 'podman run' default
to true, and there's no reason for 'podman start --attach' to be any
different. However, since it only makes sense to proxy signals when
the container is attached, 'podman start --sig-proxy' will continue to
error if --attach isn't used.
Signed-off-by: Debarshi Ray <rishi@fedoraproject.org>
Generate a signature claim for an image using user keyring (--sign-by). The signature file will be stored in simple json format under the default or the given directory (--directory or yaml file in /etc/containers/registries.d/).
Signed-off-by: Qi Wang <qiwan@redhat.com>
During an earlier bugfix, we swapped all instances of
ContainerConfig to Config, which was meant to fix some data we
were returning from Inspect. This unfortunately also renamed a
libpod internal struct for container configs. Undo the rename
here.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Add the ability to build a remote client in golang that uses all
the same front-end cli code and output code. The initial limitations
here are that it can only be a local client while the bridge and
resolver code is being written for the golang varlink client.
Tests and docs will be added in subsequent PRs.
Signed-off-by: baude <bbaude@redhat.com>
Pulls in fixes for determining insecure registries by removing redundant
wrapper code and instead using the API of sysregistriesv2 directly.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Users have no idea what storage configuration file is used to setup
storage, so adding this to podman info, should make it easier to
discover.
This requires a revendor of containers/storage
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
OpenShift Merge Robot
Giuseppe Scrivano
Qi Wang
W. Trevor King
Valentin Rothberg
Daniel J Walsh
Debarshi Ray
Adrian Reber
Anders F Björklund
Chris Evich
Matthew Heon
baude