Remove code duplication and use the new FilterID function from
c/common. Also remove the duplicated ComputeUntilTimestamp in podman use
the one from c/common as well.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
podman info prints the network information about binary path,
package version, program version and DNS information.
Fixes: #18443
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
This fixes a lint issue, but I'm keeping it in its own commit so
it can be reverted independently if necessary; I don't know what
side effects this may have. I don't *think* there are any
issues, but I'm not sure why it wasn't a pointer in the first
place, so there may have been a reason.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
For filter=id=XXX (containers, pods) and =ctr-ids=XXX (pods):
if XXX is only hex characters, treat it as a PREFIX
otherwise, treat it as a REGEX
Add tests. Update documentation. And fix an incorrect help message.
Fixes: #18471
Signed-off-by: Ed Santiago <santiago@redhat.com>
This is a nice quality-of-life change that should help to debug
situations where someone runs out of locks (usually when a bunch
of unused volumes accumulate).
Signed-off-by: Matt Heon <mheon@redhat.com>
Being able to easily identify what lock has been allocated to a
given Libpod object is only somewhat useful for debugging lock
issues, but it's trivial to expose and I don't see any harm in
doing so.
Signed-off-by: Matt Heon <mheon@redhat.com>
Implement means for reflecting failed containers (i.e., those having
exited non-zero) to better integrate `kube play` with systemd. The
idea is to have the main PID of `kube play` exit non-zero in a
configurable way such that systemd's restart policies can kick in.
When using the default sdnotify-notify policy, the service container
acts as the main PID to further reduce the resource footprint. In that
case, before stopping the service container, Podman will lookup the exit
codes of all non-infra containers. The service will then behave
according to the following three exit-code policies:
- `none`: exit 0 and ignore containers (default)
- `any`: exit non-zero if _any_ container did
- `all`: exit non-zero if _all_ containers did
The upper values can be passed via a hidden `kube play
--service-exit-code-propagation` flag which can be used by tests and
later on by Quadlet.
In case Podman acts as the main PID (i.e., when at least one container
runs with an sdnotify-policy other than "ignore"), Podman will continue
to wait for the service container to exit and reflect its exit code.
Note that this commit also fixes a long-standing annoyance of the
service container exiting non-zero. The underlying issue was that the
service container had been stopped with SIGKILL instead of SIGTERM and
hence exited non-zero. Fixing that was a prerequisite for the exit-code
propagation to work but also improves the integration of `kube play`
with systemd and hence Quadlet with systemd.
Jira: issues.redhat.com/browse/RUN-1776
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Add --restart flag to pod create to allow users to set the
restart policy for the pod, which applies to all the containers
in the pod. This reuses the restart policy already there for
containers and has the same restart policy options.
Add "never" to the restart policy options to match k8s syntax.
It is a synonym for "no" and does the exact same thing where the
containers are not restarted once exited.
Only the containers that have exited will be restarted based on the
restart policy, running containers will not be restarted when an exited
container is restarted in the same pod (same as is done in k8s).
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
go swagger has a flat namespace so it doesn't handle name conflicts at
all. The libpod info response uses the Info struct from some docker dep
instead. Because we cannot change the docker dependency simply rename
the Info struct, but only via swagger comment not the go actual struct.
I verified locally that this works.
Fixes#18228
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The podman kube generate command can now generate a
Deployment kind when the --ype flag is set to deployment.
By default, a Pod spec will be generated if --type flag is
not set.
Add --replicas flag to kube generate to allow users to set
the value of replicas in the generated yaml when generating a
Deployment kind.
Add e2e and minikube tests for this feature.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Currently Podman prevents SELinux container separation,
when running within a container. This PR adds a new
--security-opt label=nested
When setting this option, Podman unmasks and mountsi
/sys/fs/selinux into the containers making /sys/fs/selinux
fully exposed. Secondly Podman sets the attribute
run.oci.mount_context_type=rootcontext
This attribute tells crun to mount volumes with rootcontext=MOUNTLABEL
as opposed to context=MOUNTLABEL.
With these two settings Podman inside the container is allowed to set
its own SELinux labels on tmpfs file systems mounted into its parents
container, while still being confined by SELinux. Thus you can have
nested SELinux labeling inside of a container.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add a hidden flag to set the database backend and plumb it into
podman-info. Further add a system test to make sure the flag and the
info output are working properly.
Note that the test may need to be changed once we settled on how
to test the sqlite backend in CI.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Add a podman ulimit annotation to kube generate and play.
If a container has a container with ulimits set, kube gen
will add those as an annotation to the generated yaml.
If kube play encounters the ulimit annotation, it will set
ulimits for the container being played.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Every podman command is paying the price for this compile even when they
don't use the Regex, this will speed up start of podman by a little.
[NO NEW TESTS NEEDED] Existing tests should catch issues.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We should have done this much earlier, most of the times CNI networks
just mean networks so I changed this and also fixed some function
names. This should make it more clear what actually refers to CNI and
what is just general network backend stuff.
[NO NEW TESTS NEEDED]
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Also fix a number of duplicate words. Yet disable the new `dupword`
linter as it displays too many false positives.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
This handles the transient store options from the container/storage
configuration in the runtime/engine.
Changes are:
* Print transient store status in `podman info`
* Print transient store status in runtime debug output
* Add --transient-store argument to override config option
* Propagate config state to conmon cleanup args so the callback podman
gets the same config.
Note: This doesn't really change any behaviour yet (other than the changes
in containers/storage).
Signed-off-by: Alexander Larsson <alexl@redhat.com>
Startup healthchecks are similar to K8S startup probes, in that
they are a separate check from the regular healthcheck that runs
before it. If the startup healthcheck fails repeatedly, the
associated container is restarted.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Motivated to have a working `make lint` on Fedora 37 (beta).
Most changes come from the new `gofmt` standards.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Include the digest of the image in `podman container inspect`. The image
digest is a key information for auditing as it defines the identify of
an image. This way, it can be determined whether a container used an
image with a given CVE etc.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Auto updates using the "registry" policy require container to be created
with a fully-qualified image reference. Short names are not supported
due the ambiguity of their source registry. Initially, container
creation errored out for non FQN images but it seems that Podman has
regressed.
Fixes: #15879
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
We added the concept of image volumes in 2.2.0, to support
inspecting an image from within a container. However, this is a
strictly read-only mount, with no modification allowed.
By contrast, the new `image` volume driver creates a c/storage
container as its underlying storage, so we have a read/write
layer. This, in and of itself, is not especially interesting, but
what it will enable in the future is. If we add a new command to
allow these image volumes to be committed, we can now distribute
volumes - and changes to them - via a standard OCI image registry
(which is rather new and quite exciting).
Future work in this area:
- Add support for `podman volume push` (commit volume changes and
push resulting image to OCI registry).
- Add support for `podman volume pull` (currently, we require
that the image a volume is created from be already pulled; it
would be simpler if we had a dedicated command that did the
pull and made a volume from it)
- Add support for scratch images (make an empty image on demand
to use as the base of the volume)
- Add UOR support to `podman volume push` and
`podman volume pull` to enable both with non-image volume
drivers
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
For systems that have extreme robustness requirements (edge devices,
particularly those in difficult to access environments), it is important
that applications continue running in all circumstances. When the
application fails, Podman must restart it automatically to provide this
robustness. Otherwise, these devices may require customer IT to
physically gain access to restart, which can be prohibitively difficult.
Add a new `--on-failure` flag that supports four actions:
- **none**: Take no action.
- **kill**: Kill the container.
- **restart**: Restart the container. Do not combine the `restart`
action with the `--restart` flag. When running inside of
a systemd unit, consider using the `kill` or `stop`
action instead to make use of systemd's restart policy.
- **stop**: Stop the container.
To remain backwards compatible, **none** is the default action.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The format used for setting the bind-mount-options annotations
in the kube yaml was incorrect and caused k8s to throw an error
when trying to play the generated kube yaml.
Fix the annotation format to match the rules of k8s.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Compat: Treat already attached networks as a no-op
Applies only to containers in created state. Maintain error in running state.
Co-authored-by: Alessandro Rossi <al.rossi87@gmail.com>
Co-authored-by: Brent Baude <bbaude@redhat.com>
Co-authored-by: Jason T. Greene <jason.greene@redhat.com>
Signed-off-by: Alessandro Rossi <al.rossi87@gmail.com>
Signed-off-by: Jason T. Greene <jason.greene@redhat.com>
Also, do a general cleanup of all the timeout code. Changes
include:
- Convert from int to *uint where possible. Timeouts cannot be
negative, hence the uint change; and a timeout of 0 is valid,
so we need a new way to detect that the user set a timeout
(hence, pointer).
- Change name in the database to avoid conflicts between new data
type and old one. This will cause timeouts set with 4.2.0 to be
lost, but considering nobody is using the feature at present
(and the lack of validation means we could have invalid,
negative timeouts in the DB) this feels safe.
- Ensure volume plugin timeouts can only be used with volumes
created using a plugin. Timeouts on the local driver are
nonsensical.
- Remove the existing test, as it did not use a volume plugin.
Write a new test that does.
The actual plumbing of the containers.conf timeout in is one line
in volume_api.go; the remainder are the above-described cleanups.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Integrate sd-notify policies into `kube play`. The policies can be
configured for all contianers via the `io.containers.sdnotify`
annotation or for indidivual containers via the
`io.containers.sdnotify/$name` annotation.
The `kube play` process will wait for all containers to be ready by
waiting for the individual `READY=1` messages which are received via
the `pkg/systemd/notifyproxy` proxy mechanism.
Also update the simple "container" sd-notify test as it did not fully
test the expected behavior which became obvious when adding the new
tests.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The notify socket can now either be specified via an environment
variable or programatically (where the env is ignored). The
notify mode and the socket are now also displayed in `container inspect`
which comes in handy for debugging and allows for propper testing.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
added the following flags and handling for podman pod create
--memory-swap
--cpuset-mems
--device-read-bps
--device-write-bps
--blkio-weight
--blkio-weight-device
--cpu-shares
given the new backend for systemd in c/common, all of these can now be exposed to pod create.
most of the heavy lifting (nearly all) is done within c/common. However, some rewiring needed to be done here
as well!
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Update the init container type default to once instead
of always to match k8s behavior.
Add a new annotation that can be used to change the init
ctr type in the kube yaml.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
* Correct spelling and typos.
* Improve language.
Co-authored-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: Erik Sjölund <erik.sjolund@gmail.com>
Since conmon-rs also uses this code we moved it to c/common. Now podman
should has this also to prevent duplication.
[NO NEW TESTS NEEDED]
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We now use the golang error wrapping format specifier `%w` instead of
the deprecated github.com/pkg/errors package.
[NO NEW TESTS NEEDED]
Signed-off-by: Sascha Grunert <sgrunert@redhat.com>
add support for the --uts flag in pod create, allowing users to avoid
issues with default values in containers.conf.
uts follows the same format as other namespace flags:
--uts=private (default), --uts=host, --uts=ns:PATH
resolves#13714
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Previously, if a container had healthchecks disabled in the
docker-compose.yml file and the user did a `podman inspect <container>`,
they would have an incorrect output:
```
"Healthcheck":{
"Test":[
"CMD-SHELL",
"NONE"
],
"Interval":30000000000,
"Timeout":30000000000,
"Retries":3
}
```
After a quick change, the correct output is now the result:
```
"Healthcheck":{
"Test":[
"NONE"
]
}
```
Additionally, I extracted the hard-coded strings that were used for
comparisons into constants in `libpod/define` to prevent a similar issue
from recurring.
Closes: #14493
Signed-off-by: Jake Correnti <jcorrenti13@gmail.com>
using the new resource backend, implement podman pod create --memory which enables
users to modify memory.max inside of the parent cgroup (the pod), implicitly impacting all
children unless overriden
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Paul Holzinger
Toshiki Sonoda
OpenShift Merge Robot
Matthew Heon
Ed Santiago
Matt Heon
Valentin Rothberg
binghongtao
Urvashi Mohnani
Alexis Couvreur
Daniel J Walsh
Erik Sjölund
Alexander Larsson
Doug Rabson
Alessandro Rossi
Charlie Doern
openshift-ci[bot]
Sascha Grunert
Jake Correnti