It looks like some descriptions have changed on the docker registry
where we had been searching for images that include 'alpine'. We are
now seeing an image in the initial list that has 'alpine' in its
description.
Signed-off-by: Brent Baude <bbaude@redhat.com>
For the since and after imagve filter tests, instead of using the
read-only cache of images, we just use the empty r/w store. We then
build three images that are strictly predictable.
Signed-off-by: Brent Baude <bbaude@redhat.com>
Checkpoint/restore pod tests are not running with an older runc and now
that runc 1.1.0 appears in the repositories it was detected that the
tests were failing. This was not detected in CI as CI was not using runc
1.1.0 yet.
Signed-off-by: Adrian Reber <areber@redhat.com>
The `podman network connect` and `podman network disconnect`
commands give containers access to different networks than the
ones they were created with; these networks can also have DNS
servers associated with them. Until now, however, we did not
modify resolv.conf as network membership changed.
With this PR, `podman network connect` will add any new
nameservers supported by the new network to the container's
/etc/resolv.conf, and `podman network disconnect` command will do
the opposite, removing the network's nameservers from
`/etc/resolv.conf`.
Fixes#9603
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Ensure meaningful behaviour when called with /v3.x.x semantics
* Change return code to 409 from 500 when client attempts to use an
existing network name
* Update API bats test runner to support /v4.0.0 endpoints by default
Signed-off-by: Jhon Honce <jhonce@redhat.com>
When running podman inside systemd user units, it is possible that
systemd kills the rootless netns slirp4netns process because it was
started in the default unit cgroup. When the unit is stopped all
processes in that cgroup are killed. Since the slirp4netns process is
run once for all containers it should not be killed. To make sure
systemd will not kill the process we move it to the user.slice.
Fixes#13153
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Lot of clients are expecting proper `Content-type: application/json`
configured in response headers of `/build` compat api. Following commit
fixes that.
Fixes issues where code is setting header field after writing header
which is wrong. We must set `content-type` before we write and flush
http header.
Signed-off-by: Aditya R <arajan@redhat.com>
All the healthcheck return output now but systems tests is written to
expect empty output which seems wrong.
Modify jq output to contain newline character rather than actual newline
Signed-off-by: Aditya R <arajan@redhat.com>
It seems we are ignoring output from healthcheck session.
Open a valid pipe to healthcheck session in order read its output.
Use common pipe for both `stdout/stderr` since that was the previous
behviour as well.
Signed-off-by: Aditya R <arajan@redhat.com>
Append the podman dns seach domain to the host search domains when we
use the dnsname/aardvark server. Previously it would only use podman
seach domains and discard the host domains.
Fixes#13103
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
separated cgroupNS sharing from setting the pod as the cgroup parent,
made a new flag --share-parent which sets the pod as the cgroup parent for all
containers entering the pod
remove cgroup from the default kernel namespaces since we want the same default behavior as before which is just the cgroup parent.
resolves#12765
Signed-off-by: cdoern <cdoern@redhat.com>
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Signed-off-by: cdoern <cdoern@redhat.com>
podman system prune should also remove all networks. When we want to
users to migrate to the new network stack we recommend to run podman
system reset. However this did not remove networks and if there were
still networks around we would continue to use cni since this was
considered an old system.
There is one exception for the default network. It should not be removed
since this could cause other issues when it no longer exists. The
network backend detection logic ignores the default network so this is
fine.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This reverts commit a1bc8cb52c.
Please see resolv.conf(5) search domains must be on the same line. If
you use multiple seach key words only the last one is used. I tested this
with alpine and it works correctly when they are on the same line so I
am not sure what issues Dan had with it but this is not correct.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Alpine does not seem to use search correctly when there are multiple
search domains on the same line. It only uses the first with the advent.
When podman runs within a separate network we are appending on
dns.podman as a search, if you add a search domain, then this causes the
local search on network to fail.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
these mount flags are already used for the /dev/shm mount on the host,
but they are not set for the bind mount itself.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
by default slirp4netns uses the tap0 device. When slirp4netns is
used, use that device by default instead of eth0.
Closes: https://github.com/containers/podman/issues/11695
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Often users want their overlayed volumes to be `non-volatile` in nature
that means that same `upper` dir can be re-used by one or more
containers but overall of nature of volumes still have to be `overlay`
so work done is still on a overlay not on the actual volume.
Following PR adds support for more advanced options i.e custom `workdir`
and `upperdir` for overlayed volumes. So that users can re-use `workdir`
and `upperdir` across new containers as well.
Usage
```console
$ podman run -it -v myvol:/data:O,upperdir=/path/persistant/upper,workdir=/path/persistant/work alpine sh
```
Signed-off-by: Aditya R <arajan@redhat.com>
podman network create --subnet, --gateway and --ip-range can now be
specified multiple times to join the network to more than one subnet.
This is very useful if you want to use a dual stack network and assign a
fixed ipv4 and ipv6 subnet. The order of the options is important here,
the first --gateway/--ip-range will be assigned to the first subnet and
so on.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Bumps Buildah to v1.24.0 and adopts the new values for pull:
true, false, never, and always. The pull-never and pull-always options
for the build command are still usable, but they have been removed from
the man page documentation with this change.
Signed-off-by: tomsweeneyredhat <tsweeney@redhat.com>
machinectl does not propogate error messages and adds extra lines in the output, exec.Cmd is able to clear the env besides PATH and TERM,
and use the given UID and GID to execute the command properly.
machinectl is still used to create a user session. Ubuntu support is limited by this.
Signed-off-by: cdoern <cdoern@redhat.com>
Minimal: only test Fedora.Latest.
Reason: podman 4.0.0-0.2.rc2 broke bodhi gating tests:
https://github.com/containers/podman/issues/12989
Requires skipping two recently-added tests that use 'podman unshare',
which doesn't work on remote.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Valentin Rothberg
Brent Baude
OpenShift Merge Robot
Lokesh Mandvekar
Adrian Reber
Daniel J Walsh
Matthew Heon
Jhon Honce
Paul Holzinger
Ed Santiago
Aditya R
Chris Evich
cdoern
Giuseppe Scrivano
Yaron Dayagi
tomsweeneyredhat