Create a new template for generating a pod unit file. Eventually, this
allows for treating and extending pod and container generation
seprately.
The `--new` flag now also works on pods.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add an `--infra-conmon-pidfile` flag to `podman-pod-create` to write the
infra container's conmon process ID to a specified path. Several
container sub-commands already support `--conmon-pidfile` which is
especially helpful to allow for systemd to access and track the conmon
processes. This allows for easily tracking the conmon process of a
pod's infra container.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Rename the container ID file from "cid" to "ctr-id" to make the
generated unit files a) easier to read and to b) pro-actively
avoid any confusion when pod ID files are being added in the
future.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Allow containers to join an existing pod via the `--pod-id-file` which
is already supported by a number of `podman-pod` subcommands. Also add
tests to make sure it's working and to prevent future regressions.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Support the `--pod-id-file` flag in the rm, start and stop pod commands.
This completes the already support flag in pod-create and is another
prerequisite for generating generic systemd unit files for pods.
Also add completions, docs and tests.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add a `CreateCommand` field to the pod config which includes the entire
`os.Args` at pod-creation. Similar to the already existing field in a
container config, we need this information to properly generate generic
systemd unit files for pods. It's a prerequisite to support the `--new`
flag for pods.
Also add the `CreateCommand` to the pod-inspect data, which can come in
handy for debugging, general inspection and certainly for the tests that
are added along with the other changes.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Two areas needed tweaking to accomplish this: port parsing and
binding ports on the host.
Parsing is an obvious problem - we have to accomodate an IPv6
address enclosed by [] as well as a normal IPv4 address. It was
slightly complicated by the fact that we previously just counted
the number of colons in the whole port definition (a thousand
curses on whoever in the IPv6 standard body decided to reuse
colons for address separators), but did not end up being that
bad.
Libpod also (optionally) binds ports on the host to prevent their
reuse by host processes. This code was IPv4 only for TCP, and
bound to both for UDP (which I'm fairly certain is not correct,
and has been adjusted). This just needed protocols adjusted to
read "tcp4"/"tcp6" and "udp4"/"udp6" based on what we wanted to
bind to.
Fixes#5715
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
podman-remote has not been tested. A principal part of the
problem was #5387 - the YAML I wrote did not have the
intended effect, it did not set TEST_REMOTE_CLIENT=true
and because of my multiple iterations I did not catch this
during testing.
Part 1 of this PR is to fix .cirrus.yml to enable remote tests.
Part 2 -- what I had first noticed and tried to fix -- is that
rootless_test.sh was never running remote because, of course,
envariables are not sent via ssh. I reworked integration_test.sh
and rootless_test.sh to use a command-line decision instead.
Part 3, sigh, is to disable one failing integration test
and *all* system tests, because so many of the latter are
failing. Addressing those failures needs to be done in
subsequent PRs. Issues #6538, #6539, #6540 are filed for
some of the problems I isolated. There will be more.
Also, minor, fixed some stale references to varlink.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Start stop system service for each test class to make it east to integrate to CI
Adds more tests
Add some common methods shared between images and containers test.
Signed-off-by: Sujil02 <sushah@redhat.com>
Systemd enablement has to happen on the server side, since we need
check if the image is running systemd.
Also need to make sure user setting the StopSignal is not overriden on the
server side. But if not set and using systemd, we set it correctly.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
- (minor): apiv2 tests: check for full ID
Observation made while reviewing #6461: tests were checking
only for a 12-character container/image ID in return value.
It's actually 64, and we should test for that. This should
also minimize confusion in a future maintainer.
- podman pause/unpause: new test
Runs a 'date/sleep' loop, pauses container, sleeps 3s,
restarts, then confirms that there's a 3- to 6-second
gap in the logs for the container.
- podman healthcheck: new test
run a container with healthcheck, test both healthy
and unhealthy conditions
- podman pod: check '{{.Pod}}' field in podman ps
Hey, as long as we have a pod with two running
containers, might as well confirm that 'podman ps'
returns the expected pod ID.
Signed-off-by: Ed Santiago <santiago@redhat.com>
We are currently able to inspect images with
`podman container inspect` and containers with
`podman image inspect` and neither of those seem correct. This
ensures that the appropriate flags, and only the appropriate
flags, are available for each specialized exec, and they can only
inspect the specific type they were intended to.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* podman --remote ssh://<user>:<password>@<host>:<port><path>
* podman --remote ssh://<user>:<password>@<host>:<port><path> \
--identity <path> --passphrase <phrase>
* ssh-add <key>
podman --remote ssh://<user>@<host><path>
* Fix `podman help` to run even if podman missing components
* Prompt for passphrase on stdin IFF key is protected and passphrase
not given via any other configuration
* cobra flags do not support optional value flags therefore refactored
--remote to be a boolean and --url will now contain the URI to Podman
service
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Podman containers can specify that they get their network
namespace from another container. This is automatic in pods, but
any container can do it.
The problem is that these containers are not guaranteed to have a
network namespace of their own; it is perfectly valid to join the
network namespace of a --net=host container, and both containers
will end up in the host namespace. The code for obtaining network
stats did not account for this, and could cause segfaults as a
result. Fortunately, the fix is simple - the function we use to
get said stats already performs appropriate checks, so we just
need to recursively call it.
Fixes#5652
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
We also need to rework container/image inspect to be separate,
but that can happen in another PR.
Fixes#6472
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
The biggest obstacle here was cleanup - we needed a way to remove
detached exec sessions after they exited, but there's no way to
tell if an exec session will be attached or detached when it's
created, and that's when we must add the exit command that would
do the removal. The solution was adding a delay to the exit
command (5 minutes), which gives sufficient time for attached
exec sessions to retrieve the exit code of the session after it
exits, but still guarantees that they will be removed, even for
detached sessions. This requires Conmon 2.0.17, which has the new
`--exit-delay` flag.
As part of the exit command rework, we can drop the hack we were
using to clean up exec sessions (remove them as part of inspect).
This is a lot cleaner, and I'm a lot happier about it.
Otherwise, this is just plumbing - we need a bindings call for
detached exec, and that needed to be added to the tunnel mode
backend for entities.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This adds bindings for starting exec sessions, and then uses them
to wire up detached exec. Code is heavily based on Attach code
for containers, slightly modified to handle exec sessions.
Bindings are presently attached-only, detached is pending on a
Conmon update landing in CI. I'll probably get to that next.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
- exec: add test for #5046, in which conmon swallowed chars
on a large byte transfer
- pod: add 'pod exists' tests, both positive and negative;
consolidate tests; add '--label', and check in 'pod inspect'
add 'pod ps' tests
- networking: add test for #5466, in which detached run
with --userns=keep-id would not forward a port
Signed-off-by: Ed Santiago <santiago@redhat.com>
the pod ps man page says .Label is valid go template format. i dont think the function was actually ever implemented.
Fixes#6448
Signed-off-by: Brent Baude <bbaude@redhat.com>
OpenShift Merge Robot
Valentin Rothberg
Matthew Heon
Ed Santiago
Brent Baude
Sujil02
Daniel J Walsh
Qi Wang
Jhon Honce
Alex Jia
theunrealgeek