store: drop remap-[ug]ids

drop the possibility to configure a remapping for all the layers in
the storage.

The feature dates back to the initial fork from Docker, that supported
a single user namespace where all the images were pulled. It was never
used by the container tools since we have a finer control of the user
namespaces.

Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>

docs/containers-storage.conf.5.md

@@ -111,24 +111,6 @@ containers/storage supports four keys
     partial pulls in order to take advantage of local deduplication and hardlinking.  It is an
     expensive operation so it is not enabled by default.
 
-**remap-uids=**""
-**remap-gids=**""
-  Remap-UIDs/GIDs is the mapping from UIDs/GIDs as they should appear inside of a container, to the UIDs/GIDs outside of the container, and the length of the range of UIDs/GIDs.  Additional mapped sets can be listed and will be heeded by libraries, but there are limits to the number of mappings which the kernel will allow when you later attempt to run a container.
-
-  Example
-     remap-uids = "0:1668442479:65536"
-     remap-gids = "0:1668442479:65536"
-
-  These mappings tell the container engines to map UID 0 inside of the container to UID 1668442479 outside.  UID 1 will be mapped to 1668442480. UID 2 will be mapped to 1668442481, etc, for the next 65533 UIDs in succession.
-
-**remap-user**=""
-**remap-group**=""
-  Remap-User/Group is a user name which can be used to look up one or more UID/GID ranges in the /etc/subuid or /etc/subgid file.  Mappings are set up starting with an in-container ID of 0 and then a host-level ID taken from the lowest range that matches the specified name, and using the length of that range. Additional ranges are then assigned, using the ranges which specify the lowest host-level IDs first, to the lowest not-yet-mapped in-container ID, until all of the entries have been used for maps.  This setting overrides the Remap-UIDs/GIDs setting.
-
-  Example
-     remap-user = "containers"
-     remap-group = "containers"
-
 **root-auto-userns-user**=""
   Root-auto-userns-user is a user name which can be used to look up one or more UID/GID ranges in the /etc/subuid and /etc/subgid file.  These ranges will be partitioned to containers configured to create automatically a user namespace.  Containers configured to automatically create a user namespace can still overlap with containers having an explicit mapping set.  This setting is ignored when running as rootless.
 

drivers/aufs/aufs.go

@@ -75,8 +75,6 @@ func init() {
 type Driver struct {
 	sync.Mutex
 	root          string
-	uidMaps       []idtools.IDMap
-	gidMaps       []idtools.IDMap
 	ctr           *graphdriver.RefCounter
 	pathCacheLock sync.Mutex
 	pathCache     map[string]string
@@ -129,22 +127,16 @@ func Init(home string, options graphdriver.Options) (graphdriver.Driver, error)
 
 	a := &Driver{
 		root:         home,
-		uidMaps:      options.UIDMaps,
-		gidMaps:      options.GIDMaps,
 		pathCache:    make(map[string]string),
 		ctr:          graphdriver.NewRefCounter(graphdriver.NewFsChecker(graphdriver.FsMagicAufs)),
 		locker:       locker.New(),
 		mountOptions: mountOptions,
 	}
 
-	rootUID, rootGID, err := idtools.GetRootUIDGID(options.UIDMaps, options.GIDMaps)
-	if err != nil {
-		return nil, err
-	}
 	// Create the root aufs driver dir and return
 	// if it already exists
 	// If not populate the dir structure
-	if err := idtools.MkdirAllAs(home, 0o700, rootUID, rootGID); err != nil {
+	if err := os.MkdirAll(home, 0o700); err != nil {
 		if os.IsExist(err) {
 			return a, nil
 		}
@@ -157,7 +149,7 @@ func Init(home string, options graphdriver.Options) (graphdriver.Driver, error)
 
 	// Populate the dir structure
 	for _, p := range paths {
-		if err := idtools.MkdirAllAs(path.Join(home, p), 0o700, rootUID, rootGID); err != nil {
+		if err := os.MkdirAll(path.Join(home, p), 0o700); err != nil {
 			return nil, err
 		}
 	}
@@ -334,7 +326,7 @@ func (a *Driver) createDirsFor(id, parent string) error {
 	// The path of directories are <aufs_root_path>/mnt/<image_id>
 	// and <aufs_root_path>/diff/<image_id>
 	for _, p := range paths {
-		rootPair := idtools.NewIDMappingsFromMaps(a.uidMaps, a.gidMaps).RootPair()
+		rootPair := idtools.IDPair{UID: 0, GID: 0}
 		rootPerms := defaultPerms
 		if parent != "" {
 			st, err := system.Stat(path.Join(a.rootPath(), p, parent))

drivers/btrfs/btrfs.go

@@ -66,11 +66,7 @@ func Init(home string, options graphdriver.Options) (graphdriver.Driver, error)
 		return nil, fmt.Errorf("%q is not on a btrfs filesystem: %w", home, graphdriver.ErrPrerequisites)
 	}
 
-	rootUID, rootGID, err := idtools.GetRootUIDGID(options.UIDMaps, options.GIDMaps)
+	if err := os.MkdirAll(filepath.Join(home, "subvolumes"), 0o700); err != nil {
-	if err != nil {
-		return nil, err
-	}
-	if err := idtools.MkdirAllAs(filepath.Join(home, "subvolumes"), 0o700, rootUID, rootGID); err != nil {
 		return nil, err
 	}
 
@@ -85,8 +81,6 @@ func Init(home string, options graphdriver.Options) (graphdriver.Driver, error)
 
 	driver := &Driver{
 		home:    home,
-		uidMaps: options.UIDMaps,
-		gidMaps: options.GIDMaps,
 		options: opt,
 	}
 
@@ -129,8 +123,6 @@ func parseOptions(opt []string) (btrfsOptions, bool, error) {
 type Driver struct {
 	// root of the file system
 	home         string
-	uidMaps      []idtools.IDMap
-	gidMaps      []idtools.IDMap
 	options      btrfsOptions
 	quotaEnabled bool
 	once         sync.Once
@@ -481,11 +473,7 @@ func (d *Driver) CreateReadWrite(id, parent string, opts *graphdriver.CreateOpts
 func (d *Driver) Create(id, parent string, opts *graphdriver.CreateOpts) error {
 	quotas := d.quotasDir()
 	subvolumes := d.subvolumesDir()
-	rootUID, rootGID, err := idtools.GetRootUIDGID(d.uidMaps, d.gidMaps)
+	if err := os.MkdirAll(subvolumes, 0o700); err != nil {
-	if err != nil {
-		return err
-	}
-	if err := idtools.MkdirAllAs(subvolumes, 0o700, rootUID, rootGID); err != nil {
 		return err
 	}
 	if parent == "" {
@@ -523,7 +511,7 @@ func (d *Driver) Create(id, parent string, opts *graphdriver.CreateOpts) error {
 		if err := d.setStorageSize(path.Join(subvolumes, id), driver); err != nil {
 			return err
 		}
-		if err := idtools.MkdirAllAs(quotas, 0o700, rootUID, rootGID); err != nil {
+		if err := os.MkdirAll(quotas, 0o700); err != nil {
 			return err
 		}
 		if err := os.WriteFile(path.Join(quotas, id), []byte(fmt.Sprint(driver.options.size)), 0o644); err != nil {
@@ -531,14 +519,6 @@ func (d *Driver) Create(id, parent string, opts *graphdriver.CreateOpts) error {
 		}
 	}
 
-	// if we have a remapped root (user namespaces enabled), change the created snapshot
-	// dir ownership to match
-	if rootUID != 0 || rootGID != 0 {
-		if err := os.Chown(path.Join(subvolumes, id), rootUID, rootGID); err != nil {
-			return err
-		}
-	}
-
 	mountLabel := ""
 	if opts != nil {
 		mountLabel = opts.MountLabel

drivers/driver.go

@@ -382,8 +382,6 @@ type Options struct {
 	ImageStore          string
 	DriverPriority      []string
 	DriverOptions       []string
-	UIDMaps             []idtools.IDMap
-	GIDMaps             []idtools.IDMap
 	ExperimentalEnabled bool
 }
 

drivers/overlay/overlay.go

@@ -120,8 +120,6 @@ type Driver struct {
 	home             string
 	runhome          string
 	imageStore       string
-	uidMaps          []idtools.IDMap
-	gidMaps          []idtools.IDMap
 	ctr              *graphdriver.RefCounter
 	quotaCtl         *quota.Control
 	options          overlayOptions
@@ -333,13 +331,9 @@ func Init(home string, options graphdriver.Options) (graphdriver.Driver, error)
 	backingFs = fsName
 
 	runhome := filepath.Join(options.RunRoot, filepath.Base(home))
-	rootUID, rootGID, err := idtools.GetRootUIDGID(options.UIDMaps, options.GIDMaps)
-	if err != nil {
-		return nil, err
-	}
 
 	// Create the driver home dir
-	if err := idtools.MkdirAllAs(path.Join(home, linkDir), 0o755, 0, 0); err != nil {
+	if err := os.MkdirAll(path.Join(home, linkDir), 0o755); err != nil {
 		return nil, err
 	}
 
@@ -349,7 +343,7 @@ func Init(home string, options graphdriver.Options) (graphdriver.Driver, error)
 		}
 	}
 
-	if err := idtools.MkdirAllAs(runhome, 0o700, rootUID, rootGID); err != nil {
+	if err := os.MkdirAll(runhome, 0o700); err != nil {
 		return nil, err
 	}
 
@@ -455,8 +449,6 @@ func Init(home string, options graphdriver.Options) (graphdriver.Driver, error)
 		home:             home,
 		imageStore:       options.ImageStore,
 		runhome:          runhome,
-		uidMaps:          options.UIDMaps,
-		gidMaps:          options.GIDMaps,
 		ctr:              graphdriver.NewRefCounter(graphdriver.NewFsChecker(fileSystemType)),
 		supportsDType:    supportsDType,
 		usingMetacopy:    usingMetacopy,
@@ -1023,8 +1015,8 @@ func (d *Driver) create(id, parent string, opts *graphdriver.CreateOpts, readOnl
 
 	disableQuota := readOnly
 
-	uidMaps := d.uidMaps
+	var uidMaps []idtools.IDMap
-	gidMaps := d.gidMaps
+	var gidMaps []idtools.IDMap
 
 	if opts != nil && opts.IDMappings != nil {
 		uidMaps = opts.IDMappings.UIDs()
@@ -1293,12 +1285,6 @@ func (d *Driver) getLowerDirs(id string) ([]string, error) {
 }
 
 func (d *Driver) optsAppendMappings(opts string, uidMaps, gidMaps []idtools.IDMap) string {
-	if uidMaps == nil {
-		uidMaps = d.uidMaps
-	}
-	if gidMaps == nil {
-		gidMaps = d.gidMaps
-	}
 	if uidMaps != nil {
 		var uids, gids bytes.Buffer
 		if len(uidMaps) == 1 && uidMaps[0].Size == 1 {

drivers/vfs/driver.go

@@ -33,12 +33,10 @@ func Init(home string, options graphdriver.Options) (graphdriver.Driver, error)
 	d := &Driver{
 		name:       "vfs",
 		home:       home,
-		idMappings: idtools.NewIDMappingsFromMaps(options.UIDMaps, options.GIDMaps),
 		imageStore: options.ImageStore,
 	}
 
-	rootIDs := d.idMappings.RootPair()
+	if err := os.MkdirAll(filepath.Join(home, "dir"), 0o700); err != nil {
-	if err := idtools.MkdirAllAndChown(filepath.Join(home, "dir"), 0o700, rootIDs); err != nil {
 		return nil, err
 	}
 	for _, option := range options.DriverOptions {
@@ -79,7 +77,6 @@ type Driver struct {
 	name              string
 	home              string
 	additionalHomes   []string
-	idMappings        *idtools.IDMappings
 	ignoreChownErrors bool
 	naiveDiff         graphdriver.DiffDriver
 	updater           graphdriver.LayerIDMapUpdater
@@ -152,14 +149,8 @@ func (d *Driver) create(id, parent string, opts *graphdriver.CreateOpts, ro bool
 		return fmt.Errorf("--storage-opt is not supported for vfs")
 	}
 
-	idMappings := d.idMappings
-	if opts != nil && opts.IDMappings != nil {
-		idMappings = opts.IDMappings
-	}
-
 	dir := d.dir2(id, ro)
-	rootIDs := idMappings.RootPair()
+	if err := os.MkdirAll(filepath.Dir(dir), 0o700); err != nil {
-	if err := idtools.MkdirAllAndChown(filepath.Dir(dir), 0o700, rootIDs); err != nil {
 		return err
 	}
 
@@ -174,6 +165,7 @@ func (d *Driver) create(id, parent string, opts *graphdriver.CreateOpts, ro bool
 		rootPerms = os.FileMode(0o700)
 	}
 
+	rootIDs := idtools.IDPair{UID: 0, GID: 0}
 	if parent != "" {
 		st, err := system.Stat(d.dir(parent))
 		if err != nil {

drivers/zfs/zfs.go

@@ -106,11 +106,7 @@ func Init(base string, opt graphdriver.Options) (graphdriver.Driver, error) {
 		return nil, fmt.Errorf("zfs get all -t filesystem -rHp '%s' should contain '%s'", options.fsName, options.fsName)
 	}
 
-	rootUID, rootGID, err := idtools.GetRootUIDGID(opt.UIDMaps, opt.GIDMaps)
+	if err := os.MkdirAll(base, 0o700); err != nil {
-	if err != nil {
-		return nil, fmt.Errorf("failed to get root uid/gid: %w", err)
-	}
-	if err := idtools.MkdirAllAs(base, 0o700, rootUID, rootGID); err != nil {
 		return nil, fmt.Errorf("failed to create '%s': %w", base, err)
 	}
 
@@ -118,8 +114,6 @@ func Init(base string, opt graphdriver.Options) (graphdriver.Driver, error) {
 		dataset:          rootDataset,
 		options:          options,
 		filesystemsCache: filesystemsCache,
-		uidMaps:          opt.UIDMaps,
-		gidMaps:          opt.GIDMaps,
 		ctr:              graphdriver.NewRefCounter(graphdriver.NewDefaultChecker()),
 	}
 	return graphdriver.NewNaiveDiffDriver(d, graphdriver.NewNaiveLayerIDMapUpdater(d)), nil
@@ -177,8 +171,6 @@ type Driver struct {
 	options          zfsOptions
 	sync.Mutex       // protects filesystem cache against concurrent access
 	filesystemsCache map[string]bool
-	uidMaps          []idtools.IDMap
-	gidMaps          []idtools.IDMap
 	ctr              *graphdriver.RefCounter
 }
 
@@ -448,12 +440,8 @@ func (d *Driver) Get(id string, options graphdriver.MountOpts) (_ string, retErr
 	opts := label.FormatMountLabel(mountOptions, options.MountLabel)
 	logrus.WithField("storage-driver", "zfs").Debugf(`mount("%s", "%s", "%s")`, filesystem, mountpoint, opts)
 
-	rootUID, rootGID, err := idtools.GetRootUIDGID(d.uidMaps, d.gidMaps)
-	if err != nil {
-		return "", err
-	}
 	// Create the target directories if they don't exist
-	if err := idtools.MkdirAllAs(mountpoint, 0o755, rootUID, rootGID); err != nil {
+	if err := os.MkdirAll(mountpoint, 0o755); err != nil {
 		return "", err
 	}
 

pkg/config/config.go

@@ -75,10 +75,6 @@ type OptionsConfig struct {
 	// Size
 	Size string `toml:"size,omitempty"`
 
-	// RemapUIDs is a list of default UID mappings to use for layers.
-	RemapUIDs string `toml:"remap-uids,omitempty"`
-	// RemapGIDs is a list of default GID mappings to use for layers.
-	RemapGIDs string `toml:"remap-gids,omitempty"`
 	// IgnoreChownErrors is a flag for whether chown errors should be
 	// ignored when building an image.
 	IgnoreChownErrors string `toml:"ignore_chown_errors,omitempty"`
@@ -90,13 +86,6 @@ type OptionsConfig struct {
 	// files and directories.
 	ForceMask os.FileMode `toml:"force_mask,omitempty"`
 
-	// RemapUser is the name of one or more entries in /etc/subuid which
-	// should be used to set up default UID mappings.
-	RemapUser string `toml:"remap-user,omitempty"`
-	// RemapGroup is the name of one or more entries in /etc/subgid which
-	// should be used to set up default GID mappings.
-	RemapGroup string `toml:"remap-group,omitempty"`
-
 	// RootAutoUsernsUser is the name of one or more entries in /etc/subuid and
 	// /etc/subgid which should be used to set up automatically a userns.
 	RootAutoUsernsUser string `toml:"root-auto-userns-user,omitempty"`

storage.conf

@@ -77,28 +77,6 @@ additionalimagestores = [
 #     operation so it is not enabled by default.
 pull_options = {enable_partial_images = "true", use_hard_links = "false", ostree_repos=""}
 
-# Remap-UIDs/GIDs is the mapping from UIDs/GIDs as they should appear inside of
-# a container, to the UIDs/GIDs as they should appear outside of the container,
-# and the length of the range of UIDs/GIDs.  Additional mapped sets can be
-# listed and will be heeded by libraries, but there are limits to the number of
-# mappings which the kernel will allow when you later attempt to run a
-# container.
-#
-# remap-uids = "0:1668442479:65536"
-# remap-gids = "0:1668442479:65536"
-
-# Remap-User/Group is a user name which can be used to look up one or more UID/GID
-# ranges in the /etc/subuid or /etc/subgid file.  Mappings are set up starting
-# with an in-container ID of 0 and then a host-level ID taken from the lowest
-# range that matches the specified name, and using the length of that range.
-# Additional ranges are then assigned, using the ranges which specify the
-# lowest host-level IDs first, to the lowest not-yet-mapped in-container ID,
-# until all of the entries have been used for maps. This setting overrides the
-# Remap-UIDs/GIDs setting.
-#
-# remap-user = "containers"
-# remap-group = "containers"
-
 # Root-auto-userns-user is a user name which can be used to look up one or more UID/GID
 # ranges in the /etc/subuid and /etc/subgid file.  These ranges will be partitioned
 # to containers configured to create automatically a user namespace.  Containers

storage.conf-freebsd

@@ -39,27 +39,6 @@ graphroot = "/var/db/containers/storage"
 additionalimagestores = [
 ]
 
-# Remap-UIDs/GIDs is the mapping from UIDs/GIDs as they should appear inside of
-# a container, to the UIDs/GIDs as they should appear outside of the container,
-# and the length of the range of UIDs/GIDs.  Additional mapped sets can be
-# listed and will be heeded by libraries, but there are limits to the number of
-# mappings which the kernel will allow when you later attempt to run a
-# container.
-#
-# remap-uids = 0:1668442479:65536
-# remap-gids = 0:1668442479:65536
-
-# Remap-User/Group is a user name which can be used to look up one or more UID/GID
-# ranges in the /etc/subuid or /etc/subgid file.  Mappings are set up starting
-# with an in-container ID of 0 and then a host-level ID taken from the lowest
-# range that matches the specified name, and using the length of that range.
-# Additional ranges are then assigned, using the ranges which specify the
-# lowest host-level IDs first, to the lowest not-yet-mapped in-container ID,
-# until all of the entries have been used for maps.
-#
-# remap-user = "containers"
-# remap-group = "containers"
-
 # Root-auto-userns-user is a user name which can be used to look up one or more UID/GID
 # ranges in the /etc/subuid and /etc/subgid file.  These ranges will be partitioned
 # to containers configured to create automatically a user namespace.  Containers

store.go

@@ -1088,8 +1088,6 @@ func (s *store) createGraphDriverLocked() (drivers.Driver, error) {
 		RunRoot:        s.runRoot,
 		DriverPriority: s.graphDriverPriority,
 		DriverOptions:  s.graphOptions,
-		UIDMaps:        s.uidMap,
-		GIDMaps:        s.gidMap,
 	}
 	return drivers.New(s.graphDriverName, config)
 }

types/options.go

@@ -481,33 +481,6 @@ func ReloadConfigurationFile(configFile string, storeOptions *StoreOptions) erro
 	if config.Storage.Options.MountOpt != "" {
 		storeOptions.GraphDriverOptions = append(storeOptions.GraphDriverOptions, fmt.Sprintf("%s.mountopt=%s", config.Storage.Driver, config.Storage.Options.MountOpt))
 	}
-
-	uidmap, err := idtools.ParseIDMap([]string{config.Storage.Options.RemapUIDs}, "remap-uids")
-	if err != nil {
-		return err
-	}
-	gidmap, err := idtools.ParseIDMap([]string{config.Storage.Options.RemapGIDs}, "remap-gids")
-	if err != nil {
-		return err
-	}
-
-	if config.Storage.Options.RemapUser != "" && config.Storage.Options.RemapGroup == "" {
-		config.Storage.Options.RemapGroup = config.Storage.Options.RemapUser
-	}
-	if config.Storage.Options.RemapGroup != "" && config.Storage.Options.RemapUser == "" {
-		config.Storage.Options.RemapUser = config.Storage.Options.RemapGroup
-	}
-	if config.Storage.Options.RemapUser != "" && config.Storage.Options.RemapGroup != "" {
-		mappings, err := idtools.NewIDMappings(config.Storage.Options.RemapUser, config.Storage.Options.RemapGroup)
-		if err != nil {
-			logrus.Warningf("Error initializing ID mappings for %s:%s %v\n", config.Storage.Options.RemapUser, config.Storage.Options.RemapGroup, err)
-			return err
-		}
-		uidmap = mappings.UIDs()
-		gidmap = mappings.GIDs()
-	}
-	storeOptions.UIDMap = uidmap
-	storeOptions.GIDMap = gidmap
 	storeOptions.RootAutoNsUser = config.Storage.Options.RootAutoUsernsUser
 	if config.Storage.Options.AutoUsernsMinSize > 0 {
 		storeOptions.AutoNsMinSize = config.Storage.Options.AutoUsernsMinSize

types/options_test.go

@@ -5,11 +5,9 @@ import (
 	"fmt"
 	"os"
 	"path/filepath"
-	"reflect"
 	"strings"
 	"testing"
 
-	"github.com/containers/storage/pkg/idtools"
 	"github.com/containers/storage/pkg/unshare"
 	"github.com/sirupsen/logrus"
 	"github.com/stretchr/testify/require"
@@ -126,75 +124,6 @@ func TestGetRootlessStorageOpts2(t *testing.T) {
 	assert.Equal(t, storageOpts.GraphRoot, expectedPath)
 }
 
-func TestSetRemapUIDsGIDsOpts(t *testing.T) {
-	var remapOpts StoreOptions
-	uidmap := []idtools.IDMap{
-		{
-			ContainerID: 0,
-			HostID:      1000000000,
-			Size:        30000,
-		},
-	}
-	gidmap := []idtools.IDMap{
-		{
-			ContainerID: 0,
-			HostID:      1500000000,
-			Size:        60000,
-		},
-	}
-
-	err := ReloadConfigurationFile("./storage_test.conf", &remapOpts)
-	require.NoError(t, err)
-	if !reflect.DeepEqual(uidmap, remapOpts.UIDMap) {
-		t.Errorf("Failed to set UIDMap: Expected %v Actual %v", uidmap, remapOpts.UIDMap)
-	}
-	if !reflect.DeepEqual(gidmap, remapOpts.GIDMap) {
-		t.Errorf("Failed to set GIDMap: Expected %v Actual %v", gidmap, remapOpts.GIDMap)
-	}
-}
-
-func TestSetRemapUserGroupOpts(t *testing.T) {
-	var remapOpts StoreOptions
-
-	user := os.Getenv("USER")
-	if user == "root" {
-		t.Skip("This test is enabled only rootless user")
-	}
-
-	configPath := "./remap_user_test.conf"
-	config := fmt.Sprintf(`
-[storage]
-driver = ""
-
-[storage.options]
-remap-uids = "0:1000000000:30000"
-remap-gids = "0:1500000000:60000"
-
-remap-user = "%s"
-remap-group = "%s"
-`, user, user)
-	f, err := os.Create(configPath)
-	require.NoError(t, err)
-	defer func() {
-		f.Close()
-		os.Remove(configPath)
-	}()
-
-	_, err = f.Write([]byte(config))
-	require.NoError(t, err)
-
-	mappings, err := idtools.NewIDMappings(user, user)
-	require.NoError(t, err)
-	err = ReloadConfigurationFile(configPath, &remapOpts)
-	require.NoError(t, err)
-	if !reflect.DeepEqual(mappings.UIDs(), remapOpts.UIDMap) {
-		t.Errorf("Failed to set UIDMap: Expected %v Actual %v", mappings.UIDs(), remapOpts.UIDMap)
-	}
-	if !reflect.DeepEqual(mappings.GIDs(), remapOpts.GIDMap) {
-		t.Errorf("Failed to set GIDMap: Expected %v Actual %v", mappings.GIDs(), remapOpts.GIDMap)
-	}
-}
-
 func TestReloadConfigurationFile(t *testing.T) {
 	content := bytes.NewBufferString("")
 	logrus.SetOutput(content)

types/storage_test.conf

@@ -25,16 +25,6 @@ rootless_storage_path = "$HOME/$UID/containers/storage"
 additionalimagestores = [
 ]
 
-# Remap-UIDs/GIDs is the mapping from UIDs/GIDs as they should appear inside of
-# a container, to the UIDs/GIDs as they should appear outside of the container,
-# and the length of the range of UIDs/GIDs.  Additional mapped sets can be
-# listed and will be heeded by libraries, but there are limits to the number of
-# mappings which the kernel will allow when you later attempt to run a
-# container.
-#
-remap-uids = "0:1000000000:30000"
-remap-gids = "0:1500000000:60000"
-
 [storage.options.overlay]
 
 # mountopt specifies comma separated list of extra mount options