Vscode update (#932)

* Add new screenshots of setting up remote containers

* Update VSCode information

daprdocs/content/en/developing-applications/ides/intellij.md

@@ -2,7 +2,7 @@
 type: docs
 title: "IntelliJ"
 linkTitle: "IntelliJ"
-weight: 1000
+weight: 2000
 description: "Configuring IntelliJ community edition for debugging with Dapr"
 ---
 

daprdocs/content/en/developing-applications/ides/vscode-remotecontainers.md

@@ -1,24 +0,0 @@
----
-type: docs
-title: "VS Code remote containers"
-linkTitle: "VS Code remote containers"
-weight: 3000
-description: "Application development and debugging with Visual Studio Code remote containers"
----
-
-## Using remote containers for your application development
-
-The Visual Studio Code Remote - Containers extension lets you use a Docker container as a full-featured development environment enabling you to [develop inside a container](https://code.visualstudio.com/docs/remote/containers).
-
-Dapr has pre-built Docker remote containers for each of the language SDKs. You can pick the one of your choice for a ready made environment. Note these pre-built containers automatically update to the latest Dapr release. 
-
-Watch this [video](https://www.youtube.com/watch?v=D2dO4aGpHcg&t=120) on how to use the Dapr VS Code Remote Containers with your application.
-
-These are the steps to use Dapr Remote Containers 
-1. Open your application workspace in VS Code
-2. In the command command palette select the  `Remote-Containers: Add Development Container Configuration Files...` command
-3. Type `dapr` to filter the list to available Dapr remote containers and choose the language container that matches your application. See screen shot below.
-4. Follow the prompts to rebuild your application in container. 
-
-<img src="../../images/vscode_remote_containers.png" width=800>
-

daprdocs/content/en/developing-applications/ides/vscode.md

@@ -1,21 +1,64 @@
 ---
 type: docs
-title: "VS Code"
-linkTitle: "VS Code"
-weight: 2000
-description:  "Application development and debugging with Visual Studio Code"
+title: "Visual Studio Code integrations with Dapr"
+linkTitle: "Visual Studio Code"
+weight: 1000
+description:  "Information on how to develop and run Dapr applications in VS Code"
 ---
 
-## Visual Studio Code Dapr extension
-It is recommended to use the *preview* of the [Dapr Visual Studio Code extension](https://marketplace.visualstudio.com/items?itemName=ms-azuretools.vscode-dapr) available in the Visual Studio marketplace for local development and debugging of your Dapr applications.
+## Extension
 
-Watch this [video](https://www.youtube.com/watch?v=OtbYCBt9C34&t=85) on how to use the Dapr VS Code extension.
+Dapr offers a *preview* [Dapr Visual Studio Code extension](https://marketplace.visualstudio.com/items?itemName=ms-azuretools.vscode-dapr) for local development and debugging of your Dapr applications.
+
+<a href="vscode:extension/ms-azuretools.vscode-dapr" class="btn btn-primary" role="button">Open in VSCode</a>
+
+### Feature overview
+- Scaffold Dapr task, launch, and component assets
+    <br /><img src="/images/vscode-extension-scaffold.png" alt="Screenshot of the Dapr VSCode extension scaffold option" width="800">
+- View running Dapr applications
+    <br /><img src="/images/vscode-extension-view.png" alt="Screenshot of the Dapr VSCode extension view running applications option" width="800">
+- Invoke Dapr application methods
+    <br /><img src="/images/vscode-extension-invoke.png" alt="Screenshot of the Dapr VSCode extension invoke option" width="800">
+- Publish events to Dapr applications
+    <br /><img src="/images/vscode-extension-publish.png" alt="Screenshot of the Dapr VSCode extension publish option" width="800">
+
+#### Example
+Watch this [video](https://www.youtube.com/watch?v=OtbYCBt9C34&t=85) on how to use the Dapr VS Code extension:
+<iframe width="560" height="315" src="https://www.youtube.com/embed/OtbYCBt9C34?start=85" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
+
+## Remote Dev Containers
+
+The Visual Studio Code Remote Containers extension lets you use a Docker container as a full-featured development environment enabling you to [develop inside a container](https://code.visualstudio.com/docs/remote/containers) without installing any additional frameworks or packages to your local filesystem.
+
+Dapr has pre-built Docker remote containers for each of the language SDKs. You can pick the one of your choice for a ready made environment. Note these pre-built containers automatically update to the latest Dapr release.
+
+### Setup a remote dev container
+
+#### Prerequisites
+- [Docker Desktop](https://www.docker.com/products/docker-desktop)
+- [Visual Studio Code](https://code.visualstudio.com/)
+- [VSCode Remote Development extension pack](https://aka.ms/vscode-remote/download/extension)
+
+#### Create remote Dapr container
+1. Open your application workspace in VS Code
+2. In the command command palette (ctrl+shift+p) type and select `Remote-Containers: Add Development Container Configuration Files...`
+    <br /><img src="/images/vscode-remotecontainers-addcontainer.png" alt="Screenshot of adding a remote container" width="700">
+3. Type `dapr` to filter the list to available Dapr remote containers and choose the language container that matches your application. Note you may need to select `Show All Definitions...`
+    <br /><img src="/images/vscode-remotecontainers-daprcontainers.png" alt="Screenshot of adding a Dapr container" width="700">
+4. Follow the prompts to rebuild your application in container. 
+    <br /><img src="/images/vscode-remotecontainers-reopen.png" alt="Screenshot of reopening an application in the dev container" width="700">
+
+#### Example
+Watch this [video](https://www.youtube.com/watch?v=D2dO4aGpHcg&t=120) on how to use the Dapr VS Code Remote Containers with your application.
+<iframe width="560" height="315" src="https://www.youtube.com/embed/D2dO4aGpHcg?start=120" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
+
+## Troubleshooting
 
 ### Debugging multiple Dapr applications at the same time
 Using the VS Code extension you can debug multiple Dapr applications at the same time with [Multi-target debugging](https://code.visualstudio.com/docs/editor/debugging#_multitarget-debugging)
 
 
-## Manually configuring Visual Studio Code for debugging with daprd
+### Manually configuring Visual Studio Code for debugging with daprd
 If instead of using the Dapr VS Code extension you wish to configure a project to use Dapr in the [tasks.json](https://code.visualstudio.com/Docs/editor/tasks) and [launch.json](https://code.visualstudio.com/Docs/editor/debugging) files these are the manual steps.
 
 When developing Dapr applications, you typically use the dapr cli to start your daprized service similar to this:
@@ -26,7 +69,9 @@ dapr run --app-id nodeapp --app-port 3000 --dapr-http-port 3500 app.js
 
 This will generate the components yaml files (if they don't exist) so that your service can interact with the local redis container. This is great when you are just getting started but what if you want to attach a debugger to your service and step through the code? This is where you can use the dapr runtime (daprd) to help facilitate this.
 
->Note: The dapr runtime (daprd) will not automatically generate the components yaml files for Redis. These will need to be created manually or you will need to run the dapr cli (dapr) once in order to have them created automatically.
+{{% alert title="Note" color="primary" %}}
+The dapr runtime (daprd) will not automatically generate the components yaml files for Redis. These will need to be created manually or you will need to run the dapr cli (dapr) once in order to have them created automatically.
+{{% /alert %}}
 
 One approach to attaching the debugger to your service is to first run daprd with the correct arguments from the command line and then launch your code and attach the debugger. While this is a perfectly acceptable solution, it does require a few extra steps and some instruction to developers who might want to clone your repo and hit the "play" button to begin debugging.
 
@@ -34,7 +79,7 @@ Using the [tasks.json](https://code.visualstudio.com/Docs/editor/tasks) and [lau
 
 Let's get started!
 
-### Modifying launch.json configurations to include a preLaunchTask
+#### Modifying launch.json configurations to include a preLaunchTask
 
 In your [launch.json](https://code.visualstudio.com/Docs/editor/debugging) file add a [preLaunchTask](https://code.visualstudio.com/Docs/editor/debugging#_launchjson-attributes) for each configuration that you want daprd launched. The [preLaunchTask](https://code.visualstudio.com/Docs/editor/debugging#_launchjson-attributes) will reference tasks that you define in your tasks.json file. Here is an example for both Node and .NET Core. Notice the [preLaunchTasks](https://code.visualstudio.com/Docs/editor/debugging#_launchjson-attributes) referenced: daprd-web and daprd-leaderboard.
 
@@ -76,7 +121,7 @@ In your [launch.json](https://code.visualstudio.com/Docs/editor/debugging) file
 }
 ```
 
-## Adding daprd tasks to tasks.json
+#### Adding daprd tasks to tasks.json
 
 You will need to define a task and problem matcher for daprd in your [tasks.json](https://code.visualstudio.com/Docs/editor/tasks) file. Here are two examples (both referenced via the [preLaunchTask](https://code.visualstudio.com/Docs/editor/debugging#_launchjson-attributes) members above). Notice that in the case of the .NET Core daprd task (daprd-leaderboard) there is also a [dependsOn](https://code.visualstudio.com/Docs/editor/tasks#_compound-tasks) member that references the build task to ensure the latest code is being run/debugged. The [problemMatcher](https://code.visualstudio.com/Docs/editor/tasks#_defining-a-problem-matcher) is used so that VSCode can understand when the daprd process is up and running.
 
@@ -173,9 +218,10 @@ Let's take a quick look at the args that are being passed to the daprd command.
 }
 ```
 
-### Wrapping up
+#### Wrapping up
 
 Once you have made the required changes, you should be able to switch to the [debug](https://code.visualstudio.com/Docs/editor/debugging) view in VSCode and launch your daprized configurations by clicking the "play" button. If everything was configured correctly, you should see daprd launch in the VSCode terminal window and the [debugger](https://code.visualstudio.com/Docs/editor/debugging) should attach to your application (you should see it's output in the debug window).
 
->Note: Since you didn't launch the service(s) using the **dapr** ***run*** cli command, but instead by running **daprd**, the **dapr** ***list*** command will not show a list of apps that are currently running.
-
+{{% alert title="Note" color="primary" %}}
+Since you didn't launch the service(s) using the **dapr** ***run*** cli command, but instead by running **daprd**, the **dapr** ***list*** command will not show a list of apps that are currently running.
+{{% /alert %}}