desktop: settings: sync general, resources, advanced sections

- wrap bullets
- align wording of common bullets to be the same between platforms

This makes it easier to see the differences between platforms when
comparing the files.

Signed-off-by: Sebastiaan van Stijn <github@gone.nl>

desktop/settings/linux-settings.md

@@ -15,19 +15,27 @@ To navigate to **Settings** either:
 
 On the **General** tab, you can configure when to start Docker and specify other settings:
 
-- **Start Docker Desktop when you log in**. This automatically starts Docker Desktop when you open your session.
+- **Start Docker Desktop when you log in**. Select to automatically start Docker
+  Desktop when you log into your machine.
 
-- **Send usage statistics**. Docker Desktop sends diagnostics, crash reports, and usage data. This information helps Docker improve and troubleshoot the application. Clear the check box to opt out.
+- **Send usage statistics**. Select so Docker Desktop sends diagnostics,
+  crash reports, and usage data. This information helps Docker improve and
+  troubleshoot the application. Clear the check box to opt out. Docker may
+  periodically prompt you for more information.
 
-- **Show weekly tips**. Select to display useful advice and suggestions about using Docker.
+- **Show weekly tips**. Select to display useful advice and suggestions about
+  using Docker.
 
-- **Open Docker Desktop dashboard at startup**. Select to automatically opens the dashboard when starting Docker Desktop.
+- **Open Docker Desktop dashboard at startup**. Select to automatically open the
+  dashboard when starting Docker Desktop.
 
-- **Use Docker Compose V2**. Select to enable the `docker-compose` command to use Docker Compose V2. For more information, see [Docker Compose V2](../../compose/index.md#compose-v2-and-the-new-docker-compose-command)
+- **Use Docker Compose V2**. Select to enable the `docker-compose` command to
+  use Docker Compose V2. For more information, see [Docker Compose V2](../../compose/index.md#compose-v2-and-the-new-docker-compose-command).
 
 ## Resources
 
-The **Resources** tab allows you to configure CPU, memory, disk, proxies, network, and other resources.
+The **Resources** tab allows you to configure CPU, memory, disk, proxies,
+network, and other resources.
 
 ### Advanced
 
@@ -36,10 +44,12 @@ On the **Advanced** tab, you can limit resources available to Docker.
 Advanced settings are:
 
 - **CPUs**. By default, Docker Desktop is set to use half the number of processors
-available on the host machine. To increase processing power, set this to a
-higher number; to decrease, lower the number.
+  available on the host machine. To increase processing power, set this to a
+  higher number; to decrease, lower the number.
 
-- **Memory**. By default, Docker Desktop is set to use 25% of your host's memory. To increase the RAM, set this to a higher number. To decrease it, lower the number.
+- **Memory**. By default, Docker Desktop is set to use 25% of your host's
+  memory. To increase the RAM, set this to a higher number; to decrease it,
+  lower the number.
 
 - **Swap**. Configure swap file size as needed. The default is 1 GB.
 

desktop/settings/mac-settings.md

@@ -15,23 +15,33 @@ To navigate to **Preferences** either:
 
 On the **General** tab, you can configure when to start Docker and specify other settings:
 
-- **Start Docker Desktop when you log in**. This automatically starts Docker Desktop when you open your session.
+- **Start Docker Desktop when you log in**. Select to automatically start Docker
+  Desktop when you log into your machine.
 
-- **Include VM in Time Machine backups**. Select to back up the Docker Desktop virtual machine. This option is disabled by default.
+- **Include VM in Time Machine backups**. Select to back up the Docker Desktop
+  virtual machine. This option is disabled by default.
 
-- **Use gRPC FUSE for file sharing**. Clear this check box to use the legacy osxfs file sharing instead.
+- **Use gRPC FUSE for file sharing**. Clear this check box to use the legacy
+  osxfs file sharing instead.
 
-- **Send usage statistics**. Select so Docker Desktop sends diagnostics, crash reports, and usage data. This information helps Docker improve and troubleshoot the application. Clear the check box to opt out.
+- **Send usage statistics**. Select so Docker Desktop sends diagnostics,
+  crash reports, and usage data. This information helps Docker improve and
+  troubleshoot the application. Clear the check box to opt out. Docker may
+  periodically prompt you for more information.
 
-- **Show weekly tips**. Select to display useful advice and suggestions about using Docker.
+- **Show weekly tips**. Select to display useful advice and suggestions about
+  using Docker.
 
-- **Open Docker Desktop dashboard at startup**. Select to automatically open Docker Dashboard when starting Docker Desktop.
+- **Open Docker Desktop dashboard at startup**. Select to automatically open the
+  dashboard when starting Docker Desktop.
 
-- **Use Docker Compose V2**. Select to enable the `docker-compose` command to use Docker Compose V2. For more information, see [Docker Compose V2](../../compose/index.md#compose-v2-and-the-new-docker-compose-command).
+- **Use Docker Compose V2**. Select to enable the `docker-compose` command to
+  use Docker Compose V2. For more information, see [Docker Compose V2](../../compose/index.md#compose-v2-and-the-new-docker-compose-command).
 
 ## Resources
 
-The **Resources** tab allows you to configure CPU, memory, disk, proxies, network, and other resources.
+The **Resources** tab allows you to configure CPU, memory, disk, proxies,
+network, and other resources.
 
 ### Advanced
 
@@ -40,11 +50,12 @@ On the **Advanced** tab, you can limit resources available to Docker.
 Advanced settings are:
 
 - **CPUs**. By default, Docker Desktop is set to use half the number of processors
-available on the host machine. To increase processing power, set this to a
-higher number; to decrease, lower the number.
+  available on the host machine. To increase processing power, set this to a
+  higher number; to decrease, lower the number.
 
-- **Memory**. By default, Docker Desktop is set to use `2` GB runtime memory,
-allocated from the total available memory on your Mac. To increase the RAM, set this to a higher number. To decrease it, lower the number.
+- **Memory**. By default, Docker Desktop is set to use `2` GB  of your host's
+  memory. To increase the RAM, set this to a higher number; to decrease it,
+  lower the number.
 
 - **Swap**. Configure swap file size as needed. The default is 1 GB.
 

desktop/settings/windows-settings.md

@@ -13,30 +13,40 @@ To navigate to **Settings** either:
 
 ## General
 
-On the **General** tab, you can configure when to start Docker and specify other settings.
+On the **General** tab, you can configure when to start Docker and specify other settings:
 
-- **Start Docker when you log in**: Select  to automatically start Docker Desktop when you log into your Windows machine.
+- **Start Docker Desktop when you log in**. Select to automatically start Docker
+  Desktop when you log into your machine.
 
-- **Expose daemon on tcp://localhost:2375 without TLS**: Check this option to enable legacy clients to connect to the Docker daemon. You must use this option with caution as exposing the daemon without TLS can result in remote code execution attacks.
+- **Expose daemon on tcp://localhost:2375 without TLS**. Check this option to
+  enable legacy clients to connect to the Docker daemon. You must use this option
+  with caution as exposing the daemon without TLS can result in remote code
+  execution attacks.
 
-- **Use the WSL 2 based engine**. WSL 2 provides better performance than the legacy Hyper-V backend. For more information, see [Docker Desktop WSL 2 backend](../windows/wsl.md).
+- **Use the WSL 2 based engine**. WSL 2 provides better performance than the
+  legacy Hyper-V backend. For more information, see [Docker Desktop WSL 2 backend](../windows/wsl.md).
 
-- **Send usage statistics**: By default, Docker Desktop sends diagnostics,
-crash reports, and usage data. This information helps Docker improve and
-troubleshoot the application. Clear the check box to opt out. Docker may periodically prompt you for more information.
+- **Send usage statistics**. Select so Docker Desktop sends diagnostics,
+  crash reports, and usage data. This information helps Docker improve and
+  troubleshoot the application. Clear the check box to opt out. Docker may
+  periodically prompt you for more information.
 
-- **Show weekly tips**. Select to display useful advice and suggestions about using Docker.
+- **Show weekly tips**. Select to display useful advice and suggestions about
+  using Docker.
 
-- **Open Docker Desktop dashboard at startup**. Select to automatically opens the dashboard when starting Docker Desktop.
+- **Open Docker Desktop dashboard at startup**. Select to automatically open the
+  dashboard when starting Docker Desktop.
 
-- **Use Docker Compose V2**. Select to enable the `docker-compose` command to use Docker Compose V2. For more information, see [Docker Compose V2](../../compose/index.md#compose-v2-and-the-new-docker-compose-command).
+- **Use Docker Compose V2**. Select to enable the `docker-compose` command to
+  use Docker Compose V2. For more information, see [Docker Compose V2](../../compose/index.md#compose-v2-and-the-new-docker-compose-command).
 
 ## Resources
 
 The **Resources** tab allows you to configure CPU, memory, disk, proxies,
-network, and other resources. Different settings are available for
-configuration depending on whether you are using Linux containers in WSL 2
-mode, Linux containers in Hyper-V mode, or Windows containers.
+network, and other resources.
+Different settings are available for configuration depending on whether you are
+using Linux containers in WSL 2 mode, Linux containers in Hyper-V mode, or Windows
+containers.
 
 ### Advanced
 
@@ -48,14 +58,17 @@ mode, Linux containers in Hyper-V mode, or Windows containers.
 > to the [WSL 2 utility VM](https://docs.microsoft.com/en-us/windows/wsl/wsl-config#configure-global-options-with-wslconfig){:target="_blank"
 class="_"}.
 
-Use the **Advanced** tab to limit resources available to Docker.
+On the **Advanced** tab, you can limit resources available to Docker.
+
+Advanced settings are:
 
 - **CPUs**. By default, Docker Desktop is set to use half the number of processors
-available on the host machine. To increase the processing power, set this to a
-higher number. To decrease the processing power, set this to a lower number.
+  available on the host machine. To increase processing power, set this to a
+  higher number; to decrease, lower the number.
 
-- **Memory**. By default, Docker Desktop is set to use `2` GB runtime memory,
-allocated from the total available memory on your machine. To increase the RAM, set this to a higher number. To decrease the RAM, lower the number.
+- **Memory**. By default, Docker Desktop is set to use `2` GB  of your host's
+  memory. To increase the RAM, set this to a higher number; to decrease it,
+  lower the number.
 
 - **Swap**. Configure swap file size as needed. The default is 1 GB.