Since #15862, containers fail to start when started with --ipc=host if
/dev/mqueue is not present. This change causes docker to create
container-local mounts for --ipc=host containers as well as in the
default case.
Signed-off-by: Burke Libbey <burke.libbey@shopify.com>
introduced --subnet, --ip-range and --gateway options in docker network
command. Also, user can allocate driver specific ip-address if any using
the --aux-address option.
Supports multiple subnets per network and also sharing ip range
across networks if the network-driver and ipam-driver supports it.
Example, Bridge driver doesnt support sharing same ip range across
networks.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
* Made use of IPAM driver primitives for legacy IP configurations
* Replaced custom Generics with backend labels
Signed-off-by: Madhu Venugopal <madhu@docker.com>
It is possible that network files do not exist, especially in the case
of `--net=host` where a host OS (like CoreOS) does not use certain
standard network files. This patch verifies that the source file of a
network mount point exists before adding it to the list of mount points
for bind mounting from the container's metadata directory.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
this allows jsonfile logger to collect extra metadata from containers with
`--log-opt labels=label1,label2 --log-opt env=env1,env2`.
Extra attributes are saved into `attrs` attributes for each log data.
Signed-off-by: Daniel Dao <dqminh@cloudflare.com>
this allows journald logger to collect extra metadata from containers with
`--log-opt labels=label1,label2 --log-opt env=env1,env2`
Signed-off-by: Daniel Dao <dqminh@cloudflare.com>
this allows fluentd logger to collect extra metadata from containers with
`--log-opt labels=label1,label2 --log-opt env=env1,env2`
Signed-off-by: Daniel Dao <dqminh@cloudflare.com>
this allows gelf logger to collect extra metadata from containers with
`--log-opt labels=label1,label2 --log-opt env=env1,env2`
Additional log field will be prefixed with `_` as per gelf protocol
https://www.graylog.org/resources/gelf/
Signed-off-by: Daniel Dao <dqminh@cloudflare.com>
Generate a hash chain involving the image configuration, layer digests,
and parent image hashes. Use the digests to compute IDs for each image
in a manifest, instead of using the remotely specified IDs.
To avoid breaking users' caches, check for images already in the graph
under old IDs, and avoid repulling an image if the version on disk under
the legacy ID ends up with the same digest that was computed from the
manifest for that image.
When a calculated ID already exists in the graph but can't be verified,
continue trying SHA256(digest) until a suitable ID is found.
"save" and "load" are not changed to use a similar scheme. "load" will
preserve the IDs present in the tar file.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
All the go-lint work forced any existing "Uid" -> "UID", but seems to
not have the same rules for Gid, so stat package has calls UID() and
Gid().
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
This adds the capability to turn on user namespace support when using an
experimental build Docker daemon binary using the `--userns-remap` flag.
Also documentation is added to the experimental docs.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Adds support for the daemon to handle user namespace maps as a
per-daemon setting.
Support for handling uid/gid mapping is added to the builder,
archive/unarchive packages and functions, all graphdrivers (except
Windows), and the test suite is updated to handle user namespace daemon
rootgraph changes.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
- add daemon methods Authenticate & SearchRegistryForImages
- use new methods instead of directly accessing RegistryService
Signed-off-by: Morgan Bauer <mbauer@us.ibm.com>
When `-s` is not specified, there is no need to ask if there is a plugin
with the specified name.
This speeds up unit tests dramatically since they don't need to wait the
timeout period for each call to `graphdriver.New`.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
If I have some unsupported sysinfo, it's warning on daemon
side every time I use `docker info`, it seems unnecessay and
annoying to me, let's keep it quiet.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
- use daemon member directly rather than through a function call
- create GetImage method for use external to deamon
Signed-off-by: Morgan Bauer <mbauer@us.ibm.com>
There is no need to call `os.Stat` on the driver filesystem path of a
container as `os.RemoveAll` already handles (properly) the case where
the path no longer exists.
Given the results of the stat() were not even being used, there is no
value in erroring out because of the stat call failure, and worse, it
prevents daemon cleanup of containers in "Dead" state unless you re-create
directories that were already removed via a manual cleanup after a
failure. This brings removal in overlay in line with aufs/devicemapper
drivers which don't error out if the filesystem path no longer exists.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
This leverages recent additions to libkv enabling client
authentication via TLS so the discovery back-end can be locked
down with mutual TLS. Example usage:
docker daemon [other args] \
--cluster-advertise 192.168.122.168:2376 \
--cluster-store etcd://192.168.122.168:2379 \
--cluster-store-opt kv.cacertfile=/path/to/ca.pem \
--cluster-store-opt kv.certfile=/path/to/cert.pem \
--cluster-store-opt kv.keyfile=/path/to/key.pem
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
- refactor to make it easier to split the api in the future
- additional tests for non existent container case
Signed-off-by: Morgan Bauer <mbauer@us.ibm.com>
- create pass through in daemon for access to functions on daemon
member
- import image
push image
export image and corrections
lookup image & comments
load image
list images
image history & comments
Signed-off-by: Morgan Bauer <mbauer@us.ibm.com>
Right now we check for the existence of device but don't make sure it is
a thin pool device. We assume it is a thin pool device and call poolStatus()
on the device which returns an error EOF. And that error does not tell
anything.
So before we reach the stage of calling poolStatus() make sure we are working
with a thin pool device otherwise error out.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
* Moving Network Remote APIs out of experimental
* --net can now accept user created networks using network drivers/plugins
* Removed the experimental services concept and --default-network option
* Neccessary backend changes to accomodate multiple networks per container
* Integration Tests
Signed-off-by: David Calavera <david.calavera@gmail.com>
Signed-off-by: Madhu Venugopal <madhu@docker.com>
progressreader.Broadcaster becomes broadcaster.Buffered and
broadcastwriter.Writer becomes broadcaster.Unbuffered.
The package broadcastwriter is thus renamed to broadcaster.
Signed-off-by: Tibor Vass <tibor@docker.com>
This patch creates interfaces in builder/ for building Docker images.
It is a first step in a series of patches to remove the daemon
dependency on builder and later allow a client-side Dockerfile builder
as well as potential builder plugins.
It is needed because we cannot remove the /build API endpoint, so we
need to keep the server-side Dockerfile builder, but we also want to
reuse the same Dockerfile parser and evaluator for both server-side and
client-side.
builder/dockerfile/ and api/server/builder.go contain implementations
of those interfaces as a refactoring of the current code.
Signed-off-by: Tibor Vass <tibor@docker.com>
Start a goroutine which runs every 30 seconds and if there are deferred
deleted devices, it tries to clean those up.
Also it moves the call to cleanupDeletedDevices() into goroutine and
moves the locking completely inside the function. Now function does not
assume that device lock is held at the time of entry.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Finally here is the patch to implement deferred deletion functionality.
Deferred deleted devices are marked as "Deleted" in device meta file.
First we try to delete the device and only if deletion fails and user has
enabled deferred deletion, device is marked for deferred deletion.
When docker starts up again, we go through list of deleted devices and
try to delete these again.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Provide a command line option dm.use_deferred_deletion to enable deferred
device deletion feature. By default feature will be turned off.
Not sure if there is much value in deferred deletion being turned on
without deferred removal being turned on. So for now, this feature can
be enabled only if deferred removal is on.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Currently during startup we walk through all the device files and read
their device ID and mark in a bitmap that device id is used.
We are anyway going through all device files. So we can as well load all
that data into device hash map. This will save us little time when
container is actually launched later.
Also this will help with later patches where cleanup deferred device
wants to go through all the devices and see which have been marked for
deletion and delete these.
So re-organize the code a bit.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Simplify setupBaseImage() even further. Move some more code in a separate
function. Pure code reorganization. No functionality change.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Move thin pool related checks in a separate function. Pure code reorganization.
Makes reading code easier.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
This moves base device creation function in a separate function. Pure
code reorganization. Makes reading code little easier.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
This patch does three things. Following are the descriptions.
===
Create a separate function for delete transactions so that parent function
is little smaller.
Also close transaction if an error happens.
===
When docker is being shutdown, save deviceset metadata first before
trying to remove the devices. Generally caller gives only 10 seconds
for shutdown to complete and then kills it after that. So if some device
is busy, we will wait 20 seconds for it removal and never be able to save
metadata. So first save metadata and then deal with device removal.
===
Move issue discard operation in a separate function. This makes reading code
little easier.
Also don't issue discards if device is still open. That means devices is
still probably being used and issuing discards is not a good idea.
This is especially true in case of deferred deletion. We want to issue
discards when device is not open. At that time device can be deleted too.
Otherwise we will issue discards and deletion will actually fail. Later
we will try deletion again and issue discards again and deletion will
fail again as device is open and busy.
So this will ensure that discards are issued once when device is not open
and it can actually be deleted.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Fixes an issue where a `Dead` container has no names so the API returns
`null` instead of an empty array.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Exec start was sending HTTP 500 for every error.
Fixed an error where pausing a container and then calling exec start
caused the daemon to freeze.
Updated API docs which incorrectly showed that a successful exec start
was an HTTP 201, in reality it is HTTP 200.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Right now we seem to have 3 locks.
- devinfo.lock
This is a per device lock
- metaData.devicesLock
This is supposedely protecting map of devices.
- Global DeviceSet lock
This is protecting map of devices as well as serializing calls to libdevmapper.
Semantics of per devices lock and global deviceset lock seem to be very clear.
Even ordering between these two locks has been defined properly.
What is not clear is the need and ordering of metaData.devicesLock. Looks like
this lock is not necessary and global DeviceSet lock should be used to
protect map of devices as it is part of DeviceSet.
This patchset gets rid of metaData.devicesLock and instead uses DeviceSet
lock to protect map of devices.
Also at couple of places during initialization takes devices.Lock(). That
is not strictly necessary as there is supposed to be one thread of execution
during initializaiton. Still it makes the code clearer.
I think this makes code more clear and easier to understand and easier to
make further changes.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
maxDeviceID is upper limit on device Id thin pool can support. Right now
we have this check only during startup. It is a good idea to move this
check in loadMetadata so that any time a device file is loaded and if it
is corrupted and device Id is more than maxDevieceID, it will be detected
right then and there.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Use deactivateDevice() instead of removeDevice() directly. This will make
sure for device deletion, deferred removal is used if user has configured
it in. Also this makes reading code litle easier as there is single function
to remove a device and that is deactivateDevice().
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
If a device is still mounted at the time of DeleteDevice(), that means
higher layers have not called Put() properly on the device and are trying
to delete it. This is a bug in the code where Get() and Put() have not been
properly paired up. Fail device deletion if it is still mounted.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Exists() and HasDevice() just check if device file exists or not. It does
not say anything about if device is mounted or not. Fix comments.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
device has map (device.Devices), contains valid devices and we skip all
the files which are not device files. transaction metadata file is not
device file. Skip this file when devices files are being read and loaded
into map.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Burke Libbey
Alexandre Beslic
Vincent Demeester
Madhu Venugopal
Sebastiaan van Stijn
Tibor Vass
Jess Frazelle
Phil Estes
Daniel Dao
Aaron Lehmann
Tonis Tiigi
Hu Keping
Kun Zhang
Lei Jitang
Morgan Bauer
Brian Goff
Phil Estes
Deng Guangxing
Qiang Huang
Michael Crosby
Arnaud Porterie
Alexander Morozov
Vincent Batts
Sebastiaan van Stijn
Daniel Hiltgen
Vivek Goyal
Tibor Vass
Antonio Murdaca
John Howard
Antonio Murdaca
Daniel Nephin
Jessica Frazelle
Darren Stahl
David Calavera