Currently when containers are linked the alias name (e.g. from `--link
name:alias`) is added to the parent container's `/etc/hosts` with a
reference to the IP of the linked container. Some software requires
using the official hostname or node name in operations that need to
match on those values, and it is therefore helpful if the parent
container can refer to the child/link using those same values and still
access the same IP.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Since the separator for extra host settings (for /etc/hosts in a
container) is a ":", the code that handles extra hosts needed to only
split on the first ":" to preserve IPv6 addresses which are passed via
the command line settings as well as stored in the JSON container
config.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
If stop/kill command hits a short window between process' exit and
container's cleanup, it will no longer fail with 'no such process'
error.
Resolves#10182
Signed-off-by: Michal Minar <miminar@redhat.com>
Addresses #5811
This cleans up an error in the logic which removes localhost resolvers
from the host resolv.conf at container creation start time. Specifically
when the determination is made if any nameservers are left after
removing localhost resolvers, it was using a string match on the word
"nameserver", which could have been anywhere (including commented out)
leading to incorrect situations where no nameservers were left but the
default ones were not added.
This also adds some complexity to the regular expressions for finding
nameservers in general, as well as matching on localhost resolvers due
to the recent addition of IPv6 support. Because of IPv6 support now
available in the Docker daemon, the resolvconf code is now aware of
IPv6 enable/disable state and uses that for both filter/cleaning of
nameservers as well as adding default Google DNS (IPv4 only vs. IPv4
and IPv6 if IPv6 enabled). For all these changes, tests have been
added/strengthened to test these additional capabilities.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Fixes#9709
In cases where the volumes-from container is removed and the consuming
container is restarted, docker was trying to re-apply volumes from that
now missing container, which is uneccessary since the volumes are
already applied.
Also cleaned up the volumes-from parsing function, which was doing way more than
it should have been.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Add a --readonly flag to allow the container's root filesystem to be
mounted as readonly. This can be used in combination with volumes to
force a container's process to only write to locations that will be
persisted. This is useful in many cases where the admin controls where
they would like developers to write files and error on any other
locations.
Closes#7923Closes#8752
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
We want to be able to use container without the PID namespace. We basically
want containers that can manage the host os, which I call Super Privileged
Containers. We eventually would like to get to the point where the only
namespace we use is the MNT namespace to bring the Apps userspace with it.
By eliminating the PID namespace we can get better communication between the
host and the clients and potentially tools like strace and gdb become easier
to use. We also see tools like libvirtd running within a container telling
systemd to place a VM in a particular cgroup, we need to have communications of the PID.
I don't see us needing to share PID namespaces between containers, since this
is really what docker exec does.
So currently I see us just needing docker run --pid=host
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
This fixes the container start issue for containers which were started
on a daemon prior to the resolv.conf updater PR. The update code will
now safely ignore these containers (given they don't have a sha256 hash
to compare against) and will not attempt to update the resolv.conf
through their lifetime.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Only modifies non-running containers resolv.conf bind mount, and only if
the container has an unmodified resolv.conf compared to its contents at
container start time (so we don't overwrite manual/automated changes
within the container runtime). For containers which are running when
the host resolv.conf changes, the update will only be applied to the
container version of resolv.conf when the container is "bounced" down
and back up (e.g. stop/start or restart)
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
If .dockerignore mentions either then the client will send them to the
daemon but the daemon will erase them after the Dockerfile has been parsed
to simulate them never being sent in the first place.
an events test kept failing for me so I tried to fix that too
Closes#8330
Signed-off-by: Doug Davis <dug@us.ibm.com>
Also makes streamConfig Pipe methods not return error, since there was
no error for them to be able to return anyway.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
There has been a lot of discussion (issues 4242 and 5262) about making
`FROM scratch` either a special case or making `FROM` optional, implying
starting from an empty file system.
This patch makes the build command `FROM scratch` special cased from now on
and if used does not pull/set the the initial layer of the build to the ancient
image ID (511136ea..) but instead marks the build as having no base image. The
next command in the dockerfile will create an image with a parent image ID of "".
This means every image ever can now use one fewer layer!
This also makes the image name `scratch` a reserved name by the TagStore. You
will not be able to tag an image with this name from now on. If any users
currently have an image tagged as `scratch`, they will still be able to use that
image, but will not be able to tag a new image with that name.
Goodbye '511136ea3c5a64f264b78b5433614aec563103b4d4702f3ba7d4d2698e22c158',
it was nice knowing you.
Fixes#4242
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Some workloads rely on IPC for communications with other processes. We
would like to split workloads between two container but still allow them
to communicate though shared IPC.
This patch mimics the --net code to allow --ipc=host to not split off
the IPC Namespace. ipc=container:CONTAINERID to share ipc between containers
If you share IPC between containers, then you need to make sure SELinux labels
match.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
when a container failed to start, saves the error message into State.Error so
that it can be retrieved when calling `docker inspect` instead of having to
look at the log
Docker-DCO-1.1-Signed-off-by: Daniel, Dao Quang Minh <dqminh89@gmail.com> (github: dqminh)
Fixes#1992
Right now when you `docker cp` a path which is in a volume, the cp
itself works, however you end up getting files that are in the
container's fs rather than the files in the volume (which is not in the
container's fs).
This makes it so when you `docker cp` a path that is in a volume it
follows the volume to the real path on the host.
archive.go has been modified so that when you do `docker cp mydata:/foo
.`, and /foo is the volume, the outputed folder is called "foo" instead
of the volume ID (because we are telling it to tar up
`/var/lib/docker/vfs/dir/<some id>` and not "foo", but the user would be
expecting "foo", not the ID
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Stable IPs causes some regressions in the way people use Docker, see GH#8493.
Reverting it for 1.3, we'll enable it back for the next release.
Signed-off-by: Andrea Luzzardi <aluzzardi@gmail.com>
Currently if you start the docker -d on a system with 127.0.0.1 in /etc/resolv.conf
It will set the default dns to 8.8.8.8 8.8.4.4 permanently.
This causes a problem at boot on Fedora machines where NetworkManager has not
populated /etc/resolv.conf before docker gets started.
This fix checks /etc/resolv.conf on every docker run. And only populates
daemon.config.Dns if the user specified it on the command line.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
The defer logic was a little tricky and was hiding one bug: `err` was
being redefined (with `:=`) and thus it escaped the defer error checking
logic.
Signed-off-by: Andrea Luzzardi <aluzzardi@gmail.com>
This change will allocate network settings (IP and public ports) at
container creation rather than start and keep them throughout the
lifetime of the container (i.e. until it gets destroyed) instead of
discarding them when the container is stopped.
Signed-off-by: Andrea Luzzardi <aluzzardi@gmail.com>
Since we are moving network allocation outside of container scope (it
will be managed by create/destroy), those functions need to be
accessible from the outside.
Signed-off-by: Andrea Luzzardi <aluzzardi@gmail.com>
Right now, MAC addresses are randomly generated by the kernel when
creating the veth interfaces.
This causes different issues related to ARP, such as #4581, #5737 and #8269.
This change adds support for consistent MAC addresses, guaranteeing that
an IP address will always end up with the same MAC address, no matter
what.
Since IP addresses are already guaranteed to be unique by the
IPAllocator, MAC addresses will inherit this property as well for free.
Consistent mac addresses is also a requirement for stable networking (#8297)
since re-using the same IP address on a different MAC address triggers the ARP
issue.
Finally, this change makes the MAC address accessible through docker
inspect, which fixes#4033.
Signed-off-by: Andrea Luzzardi <aluzzardi@gmail.com>
Now that the archive package does not depend on any docker-specific
packages, only those in pkg and vendor, it can be safely moved into pkg.
Signed-off-by: Rafe Colton <rafael.colton@gmail.com>
This is the first of two steps to break the archive package's dependence
on utils so that archive may be moved into pkg. Also, the `Go()`
function is small, concise, and not specific to the docker internals, so
it is a good candidate for pkg.
Signed-off-by: Rafe Colton <rafael.colton@gmail.com>
This also removes dead code in the native driver for a past feature that
was never fully implemented.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
This adds a --add-host host:ip flag which appends lines to /etc/hosts. This is needed in places where you want the container to get a different name resolution than it would through DNS. This was submitted before as #5525, closed, and now I am re-opening. It has come up 2 or 3 times in the last couple days.
Signed-off-by: Tim Hockin <thockin@google.com>
Some graphdrivers are Differs and type assertions are made
in various places throughout the project. Differ offers some
convenience in generating/applying diffs of filesystem layers
but for most graphdrivers another code path is taken.
This patch brings all of the logic related to filesystem
diffs in one place, and simplifies the implementation of some
common types like Image, Daemon, and Container.
Signed-off-by: Josh Hawn <josh.hawn@docker.com>
1. /container/<name>/exec - Creates a new exec command instance in the daemon and container '<name>'. Returns an unique ID for each exec command.
2. /exec/<name>/start - Starts an existing exec command instance. Removes the exec command from the daemon once it completes.
Adding /exec/<name>/resize to resize tty session of an exec command.
Docker-DCO-1.1-Signed-off-by: Vishnu Kannan <vishnuk@google.com> (github: vishh)
This removes a shim `daemon.Server` interface which was used to start
separating Daemon from Server *gradually*, without getting cyclic
dependency errors.
Now that the last Daemon->Server dependency has been removed, we can
finally remove the shim. Yay!
Signed-off-by: Solomon Hykes <solomon@docker.com>
* Events subsystem merged from `server/events.go` and
`utils/jsonmessagepublisher.go` and moved to `events/events.go`
* Only public interface for this subsystem is engine jobs
* There is two new engine jobs - `log_event` and `subscribers_count`
* There is auxiliary function `container.LogEvent` for logging events for
containers
Docker-DCO-1.1-Signed-off-by: Alexandr Morozov <lk4d4math@gmail.com> (github: LK4D4)
[solomon@docker.com: resolve merge conflicts]
Signed-off-by: Solomon Hykes <solomon@docker.com>
Here was possible race with inspect where we changing HostConfig.Links
Docker-DCO-1.1-Signed-off-by: Alexandr Morozov <lk4d4math@gmail.com> (github: LK4D4)
We add a --device flag which can be used like:
docker run --device /dev/sda:/dev/xvda:rwm ubuntu /bin/bash
To allow the container to have read write permissions to access the host's /dev/sda via a node named /dev/xvda in the container.
Note: Much of this code was written by Dinesh Subhraveti dineshs@altiscale.com (github: dineshs-altiscale) and so he deserves a ton of credit.
Docker-DCO-1.1-Signed-off-by: Timothy <timothyhobbs@seznam.cz> (github: timthelion)
It became slightly faster and lighter
possibly fixes#5923 problems
Docker-DCO-1.1-Signed-off-by: Alexandr Morozov <lk4d4math@gmail.com> (github: LK4D4)
This patch updates container.getResourcePath and container.getRootResourcePath
to return the error from symlink.FollowSymlinkInScope (rather than using utils).
Docker-DCO-1.1-Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> (github: cyphar)
Remove Inject to help rebase
Docker-DCO-1.1-Signed-off-by: Tibor Vass <teabee89@gmail.com> (github: tiborvass)
Docker-DCO-1.1-Signed-off-by: cyphar <cyphar@cyphar.com> (github: tiborvass)
This patch adds pause/unpause to the command line, api, and drivers
for use on containers. This is implemented using the cgroups/freeze
utility in libcontainer and lxc freeze/unfreeze.
Co-Authored-By: Eric Windisch <ewindisch@docker.com>
Co-Authored-By: Chris Alfonso <calfonso@redhat.com>
Docker-DCO-1.1-Signed-off-by: Ian Main <imain@redhat.com> (github: imain)
We now have one place that keeps track of (most) devices that are allowed and created within the container. That place is pkg/libcontainer/devices/devices.go
This fixes several inconsistencies between which devices were created in the lxc backend and the native backend. It also fixes inconsistencies between wich devices were created and which were allowed. For example, /dev/full was being created but it was not allowed within the cgroup. It also declares the file modes and permissions of the default devices, rather than copying them from the host. This is in line with docker's philosphy of not being host dependent.
Docker-DCO-1.1-Signed-off-by: Timothy Hobbs <timothyhobbs@seznam.cz> (github: https://github.com/timthelion)
This patch fixes the incorrect handling of paths which contain a
symlink as a path component when copying data from a container.
Essentially, this patch changes the container.Copy() method to
first "resolve" the resource by resolving all of symlinks encountered
in the path relative to the container's rootfs (using pkg/symlink).
Docker-DCO-1.1-Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> (github: cyphar)
systemd systems do not require a /etc/hosts file exists since an nss
module is shipped that creates localhost implicitly. So, mounting
/etc/hosts can fail on these sorts of systems, as was reported on CoreOS
in issue #5812.
Instead of trying to bind mount just copy the hosts entries onto the
containers private /etc/hosts.
Docker-DCO-1.1-Signed-off-by: Brandon Philips <brandon.philips@coreos.com> (github: philips)
This patch is a preventative patch, it fixes possible future
vulnerabilities regarding unsantised paths. Due to several recent
vulnerabilities, wherein the docker daemon could be fooled into
accessing data from the host (rather than a container), this patch
was created to try and mitigate future possible vulnerabilities in
the same vein.
Docker-DCO-1.1-Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> (github: cyphar)
This patch fixes the bug that allowed cp to copy files outside of
the containers rootfs, by passing a relative path (such as
../../../../../../../../etc/shadow). This is fixed by first converting
the path to an absolute path (relative to /) and then appending it
to the container's rootfs before continuing.
Docker-DCO-1.1-Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> (github: cyphar)
This moves the Attach method from the container to the daemon. This
method mostly supports the http attach logic and does not have anything
to do with the running of a container.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Steve Francia
Phil Estes
Bradley Cicenas
Jessie Frazelle
Michael Crosby
Liu Hua
Michal Minar
Andrew C. Bodine
Alexander Morozov
Michael Crosby
Alexander Morozov
Brian Goff
Dan Walsh
Andrew Clay Shafer
Malte Janduda
Doug Davis
Josh Hawn
Srini Brahmaroutu
unclejack
Jessica Frazelle
Srini Brahmaroutu
Daniel, Dao Quang Minh
Andrea Luzzardi
unclejack
Rafe Colton
Victor Vieux
Tim Hockin
Vishnu Kannan
Victor Vieux
Michael Crosby
Josiah Kiehl
Solomon Hykes
Erik Hollensbe
Tianon Gravi
Timothy
Travis Cline
Tibor Vass
cyphar
Michael Crosby
Chris Alfonso
Ian Main
AnandkumarPatel
Brandon Philips
Bryan Murphy