Fixes#1992
Right now when you `docker cp` a path which is in a volume, the cp
itself works, however you end up getting files that are in the
container's fs rather than the files in the volume (which is not in the
container's fs).
This makes it so when you `docker cp` a path that is in a volume it
follows the volume to the real path on the host.
archive.go has been modified so that when you do `docker cp mydata:/foo
.`, and /foo is the volume, the outputed folder is called "foo" instead
of the volume ID (because we are telling it to tar up
`/var/lib/docker/vfs/dir/<some id>` and not "foo", but the user would be
expecting "foo", not the ID
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Stable IPs causes some regressions in the way people use Docker, see GH#8493.
Reverting it for 1.3, we'll enable it back for the next release.
Signed-off-by: Andrea Luzzardi <aluzzardi@gmail.com>
Currently if you start the docker -d on a system with 127.0.0.1 in /etc/resolv.conf
It will set the default dns to 8.8.8.8 8.8.4.4 permanently.
This causes a problem at boot on Fedora machines where NetworkManager has not
populated /etc/resolv.conf before docker gets started.
This fix checks /etc/resolv.conf on every docker run. And only populates
daemon.config.Dns if the user specified it on the command line.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
The defer logic was a little tricky and was hiding one bug: `err` was
being redefined (with `:=`) and thus it escaped the defer error checking
logic.
Signed-off-by: Andrea Luzzardi <aluzzardi@gmail.com>
This change will allocate network settings (IP and public ports) at
container creation rather than start and keep them throughout the
lifetime of the container (i.e. until it gets destroyed) instead of
discarding them when the container is stopped.
Signed-off-by: Andrea Luzzardi <aluzzardi@gmail.com>
Since we are moving network allocation outside of container scope (it
will be managed by create/destroy), those functions need to be
accessible from the outside.
Signed-off-by: Andrea Luzzardi <aluzzardi@gmail.com>
Right now, MAC addresses are randomly generated by the kernel when
creating the veth interfaces.
This causes different issues related to ARP, such as #4581, #5737 and #8269.
This change adds support for consistent MAC addresses, guaranteeing that
an IP address will always end up with the same MAC address, no matter
what.
Since IP addresses are already guaranteed to be unique by the
IPAllocator, MAC addresses will inherit this property as well for free.
Consistent mac addresses is also a requirement for stable networking (#8297)
since re-using the same IP address on a different MAC address triggers the ARP
issue.
Finally, this change makes the MAC address accessible through docker
inspect, which fixes#4033.
Signed-off-by: Andrea Luzzardi <aluzzardi@gmail.com>
Now that the archive package does not depend on any docker-specific
packages, only those in pkg and vendor, it can be safely moved into pkg.
Signed-off-by: Rafe Colton <rafael.colton@gmail.com>
This is the first of two steps to break the archive package's dependence
on utils so that archive may be moved into pkg. Also, the `Go()`
function is small, concise, and not specific to the docker internals, so
it is a good candidate for pkg.
Signed-off-by: Rafe Colton <rafael.colton@gmail.com>
This also removes dead code in the native driver for a past feature that
was never fully implemented.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
This adds a --add-host host:ip flag which appends lines to /etc/hosts. This is needed in places where you want the container to get a different name resolution than it would through DNS. This was submitted before as #5525, closed, and now I am re-opening. It has come up 2 or 3 times in the last couple days.
Signed-off-by: Tim Hockin <thockin@google.com>
Some graphdrivers are Differs and type assertions are made
in various places throughout the project. Differ offers some
convenience in generating/applying diffs of filesystem layers
but for most graphdrivers another code path is taken.
This patch brings all of the logic related to filesystem
diffs in one place, and simplifies the implementation of some
common types like Image, Daemon, and Container.
Signed-off-by: Josh Hawn <josh.hawn@docker.com>
1. /container/<name>/exec - Creates a new exec command instance in the daemon and container '<name>'. Returns an unique ID for each exec command.
2. /exec/<name>/start - Starts an existing exec command instance. Removes the exec command from the daemon once it completes.
Adding /exec/<name>/resize to resize tty session of an exec command.
Docker-DCO-1.1-Signed-off-by: Vishnu Kannan <vishnuk@google.com> (github: vishh)
This removes a shim `daemon.Server` interface which was used to start
separating Daemon from Server *gradually*, without getting cyclic
dependency errors.
Now that the last Daemon->Server dependency has been removed, we can
finally remove the shim. Yay!
Signed-off-by: Solomon Hykes <solomon@docker.com>
* Events subsystem merged from `server/events.go` and
`utils/jsonmessagepublisher.go` and moved to `events/events.go`
* Only public interface for this subsystem is engine jobs
* There is two new engine jobs - `log_event` and `subscribers_count`
* There is auxiliary function `container.LogEvent` for logging events for
containers
Docker-DCO-1.1-Signed-off-by: Alexandr Morozov <lk4d4math@gmail.com> (github: LK4D4)
[solomon@docker.com: resolve merge conflicts]
Signed-off-by: Solomon Hykes <solomon@docker.com>
Here was possible race with inspect where we changing HostConfig.Links
Docker-DCO-1.1-Signed-off-by: Alexandr Morozov <lk4d4math@gmail.com> (github: LK4D4)
We add a --device flag which can be used like:
docker run --device /dev/sda:/dev/xvda:rwm ubuntu /bin/bash
To allow the container to have read write permissions to access the host's /dev/sda via a node named /dev/xvda in the container.
Note: Much of this code was written by Dinesh Subhraveti dineshs@altiscale.com (github: dineshs-altiscale) and so he deserves a ton of credit.
Docker-DCO-1.1-Signed-off-by: Timothy <timothyhobbs@seznam.cz> (github: timthelion)
It became slightly faster and lighter
possibly fixes#5923 problems
Docker-DCO-1.1-Signed-off-by: Alexandr Morozov <lk4d4math@gmail.com> (github: LK4D4)
This patch updates container.getResourcePath and container.getRootResourcePath
to return the error from symlink.FollowSymlinkInScope (rather than using utils).
Docker-DCO-1.1-Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> (github: cyphar)
Remove Inject to help rebase
Docker-DCO-1.1-Signed-off-by: Tibor Vass <teabee89@gmail.com> (github: tiborvass)
Docker-DCO-1.1-Signed-off-by: cyphar <cyphar@cyphar.com> (github: tiborvass)
This patch adds pause/unpause to the command line, api, and drivers
for use on containers. This is implemented using the cgroups/freeze
utility in libcontainer and lxc freeze/unfreeze.
Co-Authored-By: Eric Windisch <ewindisch@docker.com>
Co-Authored-By: Chris Alfonso <calfonso@redhat.com>
Docker-DCO-1.1-Signed-off-by: Ian Main <imain@redhat.com> (github: imain)
We now have one place that keeps track of (most) devices that are allowed and created within the container. That place is pkg/libcontainer/devices/devices.go
This fixes several inconsistencies between which devices were created in the lxc backend and the native backend. It also fixes inconsistencies between wich devices were created and which were allowed. For example, /dev/full was being created but it was not allowed within the cgroup. It also declares the file modes and permissions of the default devices, rather than copying them from the host. This is in line with docker's philosphy of not being host dependent.
Docker-DCO-1.1-Signed-off-by: Timothy Hobbs <timothyhobbs@seznam.cz> (github: https://github.com/timthelion)
This patch fixes the incorrect handling of paths which contain a
symlink as a path component when copying data from a container.
Essentially, this patch changes the container.Copy() method to
first "resolve" the resource by resolving all of symlinks encountered
in the path relative to the container's rootfs (using pkg/symlink).
Docker-DCO-1.1-Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> (github: cyphar)
systemd systems do not require a /etc/hosts file exists since an nss
module is shipped that creates localhost implicitly. So, mounting
/etc/hosts can fail on these sorts of systems, as was reported on CoreOS
in issue #5812.
Instead of trying to bind mount just copy the hosts entries onto the
containers private /etc/hosts.
Docker-DCO-1.1-Signed-off-by: Brandon Philips <brandon.philips@coreos.com> (github: philips)
This patch is a preventative patch, it fixes possible future
vulnerabilities regarding unsantised paths. Due to several recent
vulnerabilities, wherein the docker daemon could be fooled into
accessing data from the host (rather than a container), this patch
was created to try and mitigate future possible vulnerabilities in
the same vein.
Docker-DCO-1.1-Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> (github: cyphar)
This patch fixes the bug that allowed cp to copy files outside of
the containers rootfs, by passing a relative path (such as
../../../../../../../../etc/shadow). This is fixed by first converting
the path to an absolute path (relative to /) and then appending it
to the container's rootfs before continuing.
Docker-DCO-1.1-Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> (github: cyphar)
This moves the Attach method from the container to the daemon. This
method mostly supports the http attach logic and does not have anything
to do with the running of a container.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Also make sure we copy the joining containers hosts and resolv.conf with
the hostname if we are joining it's network stack.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Added --selinux-enable switch to daemon to enable SELinux labeling.
The daemon will now generate a new unique random SELinux label when a
container starts, and remove it when the container is removed. The MCS
labels will be stored in the daemon memory. The labels of containers will
be stored in the container.json file.
When the daemon restarts on boot or if done by an admin, it will read all containers json files and reserve the MCS labels.
A potential problem would be conflicts if you setup thousands of containers,
current scheme would handle ~500,000 containers.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: crosbymichael)
This has every container using the docker daemon's pid for the processes
label so it does not work correctly.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
container.Kill() might read a pid of 0 from
container.State.Pid due to losing a race with
container.monitor() calling
container.State.SetStopped(). Sending a SIGKILL to
pid 0 is undesirable as "If pid equals 0, then sig
is sent to every process in the process group of
the calling process."
Docker-DCO-1.1-Signed-off-by: Daniel Norberg <daniel.norberg@gmail.com> (github: danielnorberg)
Brian Goff
Andrea Luzzardi
Michael Crosby
Jessica Frazelle
Dan Walsh
unclejack
Rafe Colton
Victor Vieux
Michael Crosby
Phil Estes
Jessie Frazelle
Tim Hockin
Josh Hawn
Vishnu Kannan
Alexandr Morozov
unclejack
Victor Vieux
Michael Crosby
Josiah Kiehl
Solomon Hykes
Erik Hollensbe
Tianon Gravi
Timothy
Travis Cline
Tibor Vass
cyphar
Michael Crosby
Chris Alfonso
Ian Main
AnandkumarPatel
Brandon Philips
Bryan Murphy
Johan Euphrosine
Daniel Norberg
Alexander Larsson