Create container job could fail because a container specified with
`--volumes-from` does not exist. This error is not propagated to client
though. Instead it's recognized by higher levels as "image not found".
Client then tries to pull the image and launch the container again.
This patch changes the lower level error message so that it's not
recognized as "image not found" and thus it's propagated to client.
Signed-off-by: Michal Minar <miminar@redhat.com>
Fixes#9981
Allows a volume which was created by docker (ie, in
/var/lib/docker/vfs/dir) to be used as a Bind argument via the container
start API and overwrite an existing volume.
For example:
```bash
docker create -v /foo --name one
docker create -v /foo --name two
```
This allows the volume from `one` to be passed into the container start
API as a bind to `two`, and it will overwrite it.
This was possible before 7107898d5c
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Addresses: #10618
Given that the user has no notification that they tried to bind mount
different directories on the same target in the container, this errors
out in that case, without changing the current code allowing for
--volumes-from to trump -v/VOLUME specifications.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Fixes#9629#9768
A couple of issues:
1) Volume config is not restored if we couldn't find it with the graph
driver, but bind-mounts would never be found by the graph driver since
they aren't in that dir
2) container volumes were only being restored if they were found in the
volumes repo, but volumes created by old daemons wouldn't be in the
repo until the container is at least started.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Fixes#9709
In cases where the volumes-from container is removed and the consuming
container is restarted, docker was trying to re-apply volumes from that
now missing container, which is uneccessary since the volumes are
already applied.
Also cleaned up the volumes-from parsing function, which was doing way more than
it should have been.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Currently this content gets a system label and is not writable based on
SELinux controls. This patch will set the labels to the correct label.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
Running parseVolumesFromSpec on all VolumesFrom specs before initialize
any mounts endures that we don't leave container.Volumes in an
inconsistent (partially initialized) if one of out mount groups is not
available (e.g. the container we're trying to mount from does not
exist).
Keeping container.Volumes in a consistent state ensures that next time
we Start() the container, it'll run prepareVolumes() again.
The attached test demonstrates that when a container fails to start due
to a missing container specified in VolumesFrom, it "remembers" a Volume
that worked.
Fixes: #8726
Signed-off-by: Thomas Orozco <thomas@orozco.fr>
Fixes#1992
Right now when you `docker cp` a path which is in a volume, the cp
itself works, however you end up getting files that are in the
container's fs rather than the files in the volume (which is not in the
container's fs).
This makes it so when you `docker cp` a path that is in a volume it
follows the volume to the real path on the host.
archive.go has been modified so that when you do `docker cp mydata:/foo
.`, and /foo is the volume, the outputed folder is called "foo" instead
of the volume ID (because we are telling it to tar up
`/var/lib/docker/vfs/dir/<some id>` and not "foo", but the user would be
expecting "foo", not the ID
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
When a container is restarted all the volume configs are parsed again.
Even if the volume was already handled in a previous start it was still
calling "FindOrCreateVolume" on the volume repo causing a new volume to
be created.
This wasn't being detected because as part of the mount initialization
it checks to see if the the _mount_ was already initialized, but this
happens after the parsing of the configs.
So a check is added during parsing to skip a volume which was already
created for that container.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Volume refs were not being restored on daemon restart.
This made it possible to remove a volume being used by other containers
after a daemon restart.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Prior to the volumes re-factor, data was not being copied on
volumes-from or host-mounted volumes.
After the re-factor, data was being copied for volumes-from.
This reverts this unintentional change in behavior.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Needed to check if the mode was invalid and return error, not valid and
return error.
This didn't get picked up because the existing integration-cli tests
were all either expecting errors when a valid mode was passed in (e.g.
"ro" passed in, we expected an error because it was testing write). So
modified a test which was testing for "rw" to actually pass in "rw"
instead of assuming the "rw"
Docker-DCO-1.1-Signed-off-by: Brian Goff <bgoff@cpuguy83-mbp.home> (github: cpuguy83)
Now that the archive package does not depend on any docker-specific
packages, only those in pkg and vendor, it can be safely moved into pkg.
Signed-off-by: Rafe Colton <rafael.colton@gmail.com>
- Use a common struct for Volumes
- Split out some functionality in intializeVolume into separate functions
- Removes some duplicate code
- In general much easier to grok the code now
Docker-DCO-1.1-Signed-off-by: Brian Goff <cpuguy83@gmail.com> (github: cpuguy83)
This patch updates container.getResourcePath and container.getRootResourcePath
to return the error from symlink.FollowSymlinkInScope (rather than using utils).
Docker-DCO-1.1-Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> (github: cyphar)
Remove Inject to help rebase
Docker-DCO-1.1-Signed-off-by: Tibor Vass <teabee89@gmail.com> (github: tiborvass)
Docker-DCO-1.1-Signed-off-by: cyphar <cyphar@cyphar.com> (github: tiborvass)
This only works if the file or dir is already created in
the image before setting it to be a volume. There is no way around this
because we don't have the data avaliable to set the volume at the
beginning of the dockerfile
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
systemd systems do not require a /etc/hosts file exists since an nss
module is shipped that creates localhost implicitly. So, mounting
/etc/hosts can fail on these sorts of systems, as was reported on CoreOS
in issue #5812.
Instead of trying to bind mount just copy the hosts entries onto the
containers private /etc/hosts.
Docker-DCO-1.1-Signed-off-by: Brandon Philips <brandon.philips@coreos.com> (github: philips)
This patch is a preventative patch, it fixes possible future
vulnerabilities regarding unsantised paths. Due to several recent
vulnerabilities, wherein the docker daemon could be fooled into
accessing data from the host (rather than a container), this patch
was created to try and mitigate future possible vulnerabilities in
the same vein.
Docker-DCO-1.1-Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> (github: cyphar)
This has every container using the docker daemon's pid for the processes
label so it does not work correctly.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Michal Minar
Brian Goff
Lei Jitang
Tibor Vass
Jessie Frazelle
Phil Estes
Andrew C. Bodine
Michael Crosby
Dan Walsh
unclejack
Thomas Orozco
Alexandr Morozov
Andrea Luzzardi
Brian Goff
unclejack
Rafe Colton
Erik Hollensbe
Victor Vieux
Victor Vieux
Timothy
Albert Zhang
cyphar
Michael Crosby
Michael Crosby
Brandon Philips
Alexander Larsson