Fix#14915. Add unit test for #14915.
Thanks @runcom for the test case: when the client calls 1.18 api
version w/o hostconfig it results in a nil pointer dereference.
Signed-off-by: Stephen Rust <srust@blockbridge.com>
In 1.6.2 we were decoding inspect API response into interface{}.
time.Time fields were JSON encoded as RFC3339Nano in the response
and when decoded into interface{} they were just strings so the inspect
template treated them as just strings.
From 1.7 we are decoding into types.ContainerJSON and when the template
gets executed it now gets a time.Time and it's formatted as
2015-07-22 05:02:38.091530369 +0000 UTC.
This patch brings back the old behavior by typing time.Time fields
as string so they gets formatted as they were encoded in JSON -- RCF3339Nano
Signed-off-by: Antonio Murdaca <runcom@linux.com>
Update help line to allow 90 characters instead of 80
The trust flag pushes out the help description column wider, requiring more room to display help messages.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Clean up tests to remove duplicate code
Add tests which run pull and create in an isolated configuration directory.
Add build test for untrusted tag
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Added notary server to docker base image.
Created trust suite which runs trust server for running trusted commands.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Add a trusted flag to force the cli to resolve a tag into a digest via the notary trust library and pull by digest.
On push the flag the trust flag will indicate the digest and size of a manifest should be signed and push to a notary server.
If a tag is given, the cli will resolve the tag into a digest and pull by digest.
After pulling, if a tag is given the cli makes a request to tag the image.
Use certificate directory for notary requests
Read certificates using same logic used by daemon for registry requests.
Catch JSON syntax errors from Notary client
When an uncaught error occurs in Notary it may show up in Docker as a JSON syntax error, causing a confusing error message to the user.
Provide a generic error when a JSON syntax error occurs.
Catch expiration errors and wrap in additional context.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
This patch creates a new cli package that allows to combine both client
and daemon commands (there is only one daemon command: docker daemon).
The `-d` and `--daemon` top-level flags are deprecated and a special
message is added to prompt the user to use `docker daemon`.
Providing top-level daemon-specific flags for client commands result
in an error message prompting the user to use `docker daemon`.
This patch does not break any old but correct usages.
This also makes `-d` and `--daemon` flags, as well as the `daemon`
command illegal in client-only binaries.
Signed-off-by: Tibor Vass <tibor@docker.com>
The header row was not being printed when "docker ps" was invoked without containers thanks to the new format support, and we instead received a single blank line.
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
pushV2Tag already deduplicates layers, but the scope of this
deduplication is only for a particular tag. If we are pushing all tags
in a repository, we may check layers several times. Fix this by moving
the layersSeen map from the pushV2Tag function to the v2Pusher struct.
In addition to avoiding some useless round-trips, this makes the "docker
push" output less confusing. It formerly could contain many repeated
lines like:
124e2127157f: Image already exists
124e2127157f: Image already exists
...
Add test coverage based on the "docker push" output: a hash should not
appear multiple times when pushing multiple tags.
Fixes#14873
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Prevent the docker daemon from mounting the created network files over
those provided by the user via -v command line option. This would otherwise
hide the one provide by the user.
The benefit of this is that a user can provide these network files using the
-v command line option and place them in a size-limited filesystem.
Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
Re-add the docs from @calavera's PR to the moved cli cmd reference docs.
Fix gofmt and vet issues from carried commits
Add integration test for using format with --no-trunc and multi-names
Fix custom_test map order dependency on expected value check
Add docs to reference/commandline/ps.md
Remove "-F" flag option from original carried PR content
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Adds several integration tests for `docker cp` behavior with over a dozen
tests for each of:
container -> local
local -> container
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
After merging mounting cgroups in container this tests doing wrong
checks. Cgroup paths could be prepended by other cgroups from host.
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
The automatic installation of AppArmor policies prevents the
management of custom, site-specific apparmor policies for the
default container profile. Furthermore, this change will allow
a future policy for the engine itself to be written without demanding
the engine be able to arbitrarily create and manage AppArmor policies.
- Add deb package suggests for apparmor.
- Ubuntu postinst use aa-status & fix policy path
- Add the policies to the debian packages.
- Add apparmor tests for writing proc files
Additional restrictions against modifying files in proc
are enforced by AppArmor. Ensure that AppArmor is preventing
access to these files, not simply Docker's configuration of proc.
- Remove /proc/k?mem from AA policy
The path to mem and kmem are in /dev, not /proc
and cannot be restricted successfully through AppArmor.
The device cgroup will need to be sufficient here.
- Load contrib/apparmor during integration tests
Note that this is somewhat dirty because we
cannot restore the host to its original configuration.
However, it should be noted that prior to this patch
series, the Docker daemon itself was loading apparmor
policy from within the tests, so this is no dirtier or
uglier than the status-quo.
Signed-off-by: Eric Windisch <eric@windisch.us>
As suggested in https://github.com/docker/docker/pull/14004/files#r34022527
The concern there is we can't differentiate whether user explicitly
asked for an invalid value of -1 or he did not specify anything.
I don't think this would be a problem, because:
- like all other default values like zero, we can't differentiate
user specify it or not, most of which, zeros are also invalid, so
default is default, we show these default values in help info,
so users would know if they set value as default, it'll be like
they set nothing.
- we can't do this kind of string check in REST api request, so
it'll make the behave different from docker command and RESTapi.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Closes#14621
This one grew to be much more than I expected so here's the story... :-)
- when a bad port string (e.g. xxx80) is passed into container.create()
via the API it wasn't being checked until we tried to start the container.
- While starting the container we trid to parse 'xxx80' in nat.Int()
and would panic on the strconv.ParseUint(). We should (almost) never panic.
- In trying to remove the panic I decided to make it so that we, instead,
checked the string during the NewPort() constructor. This means that
I had to change all casts from 'string' to 'Port' to use NewPort() instead.
Which is a good thing anyway, people shouldn't assume they know the
internal format of types like that, in general.
- This meant I had to go and add error checks on all calls to NewPort().
To avoid changing the testcases too much I create newPortNoError() **JUST**
for the testcase uses where we know the port string is ok.
- After all of that I then went back and added a check during container.create()
to check the port string so we'll report the error as soon as we get the
data.
- If, somehow, the bad string does get into the metadata we will generate
an error during container.start() but I can't test for that because
the container.create() catches it now. But I did add a testcase for that.
Signed-off-by: Doug Davis <dug@us.ibm.com>
The check for the end of the loop was off by one which is why we saw
errors on the following inpsect() call instead of a timeout
Signed-off-by: Doug Davis <dug@us.ibm.com>
Replaced github.com/docker/libcontainer with
github.com/opencontainers/runc/libcontaier.
Also I moved AppArmor profile generation to docker.
Main idea of this update is to fix mounting cgroups inside containers.
After updating docker on CI we can even remove dind.
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Check if there is a plugin socket first under `/run/docker/plugins/NAME.sock`.
If there is no socket for a plugin, check `/etc/docker/plugins/NAME.spec` and
`/usr/lib/docker/plugins/NAME.spec` for spec files.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Memory swappiness option takes 0-100, and helps to tune swappiness
behavior per container.
For example, When a lower value of swappiness is chosen
the container will see minimum major faults. When no value is
specified for memory-swappiness in docker UI, it is inherited from
parent cgroup. (generally 60 unless it is changed).
Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
When a container is removed but it had an exec, that still hasn't been
GC'd per PR #14476, and someone tries to inspect the exec we should
return a 404, not a 500+container not running. Returning "..not running" is
not only misleading because it could lead people to think the container is
actually still around, but after 5 minutes the error will change to a 404
after the GC. This means that we're externalizing our internall soft-deletion/GC
logic which shouldn't be any of the end user's concern. They should get the
same results immediate or after 5 minutes.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Carry #11675
Aside from what #11675 says, to me a key usecase for this is to support
more than one Docker cli running at the same time but each may have its
own set of config files.
Signed-off-by: Doug Davis <dug@us.ibm.com>
This is a follow-on to PR #14520.
PR #14520 is the quick fix to get the testing working again.
This PR makes sure that the list of execs associated with a container goes
from zero to one (as a new exec is run), then back to zero when the exec is
finished. However, we should be able to query the exec while the container
is still around, and even though the exec isn't listed in the container's
inspect data.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Libcontainer already supported mount container's own cgroup into
container, with this patch, we can see container's own cgroup info
in container.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
It seems http://hub.docker.com is not accessible anymore, so switching
to https://hub.docker.com for testRequires(c, Network).
Adds a Timeout check on the TestRequirement to *panic* if there is a
timeout (fail fast).
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
If a container is read-only, also set /proc, /sys,
& /dev to read-only. This should apply to both privileged and
unprivileged containers.
Note that when /dev is read-only, device files may still be
written to. This change will simply prevent the device paths
from being modified, or performing mknod of new devices within
the /dev path.
Tests are included for all cases. Also adds a test to ensure
that /dev/pts is always mounted read/write, even in the case of a
read-write rootfs. The kernel restricts writes here naturally and
bad things will happen if we mount it ro.
Signed-off-by: Eric Windisch <eric@windisch.us>
- Container networking statistics are no longer
retrievable from libcontainer after the introduction
of libnetwork. This change adds the missing code
for docker daemon to retireve the nw stats from
Endpoint.
Signed-off-by: Alessandro Boch <aboch@docker.com>
libnetwork host, none and bridge driver initialization is incorrectly
disabled if the daemon flag --bridge=none. The expected behavior of
setting --bridge as none is to disable the bridge driver alone and let
all other modes to be operational.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
By convention /pkg is safe to use from outside the docker tree, for example
if you're building a docker orchestrator.
/nat currently doesn't have any dependencies outside of /pkg, so it seems
reasonable to move it there.
This rename was performed with:
```
gomvpkg -vcs_mv_cmd="git mv {{.Src}} {{.Dst}}" \
-from github.com/docker/docker/nat \
-to github.com/docker/docker/pkg/nat
```
Signed-off-by: Peter Waller <p@pwaller.net>
When a container is started with `--net=host` with
a particular name and it is subsequently destroyed,
then all subsequent creations of the container with
the same name will fail. This is because in `--net=host`
the namespace is shared i.e the host namespace so
trying to destroy the host namespace by calling
`LeaveAll` will fail and the endpoint is left with
the dangling state. So the fix is, for this mode, do
not attempt to destroy the namespace but just cleanup
the endpoint state and return.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
- brings in vxlan based native multihost networking
- added a daemon flag required by libkv for dist kv operations
- moved the daemon flags to experimental
Signed-off-by: Madhu Venugopal <madhu@docker.com>
This commit makes use of the CNM model supported by LibNetwork and
provides an ability to let a container to publish a specified service.
Behind the scenes, if a service with the given name doesnt exist, it is
automatically created on appropriate network and attach the container.
Signed-off-by: Alessandro Boch <aboch@docker.com>
Signed-off-by: Madhu Venugopal <madhu@docker.com>
This commit also brings in the ability to specify a default network and its
corresponding driver as daemon flags. This helps in existing clients to
make use of newer networking features provided by libnetwork.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
DOCEKR_TLS_VERIFY was being ignored because we were just checking if the
`-tlsverify` flag was set, not the actual value, which is defaulted to
the value of `os.Getenv("DOCKER_TLS_VERIFY") != ""`
The problem that this specifically fixes is where the client has set the
`DOCKER_TLS_VERIFY` env var but is connecting to a daemon that is not
verifed.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Export image/container metadata stored in graph driver. Right now 3 fields
DeviceId, DeviceSize and DeviceName are being exported from devicemapper.
Other graph drivers can export fields as they see fit.
This data can be used to mount the thin device outside of docker and tools
can look into image/container and do some kind of inspection.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Eliminate any chance of race condition by replacing a call to sleep by a
call to top, and rely on test cleanup logic to have it exit cleanly.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
When cmd failed, log its ouput as string instead of byte array to prevent test
log like: [49 53 ....] exit status 1
Signed-off-by: Daniel, Dao Quang Minh <dqminh89@gmail.com>
Build cache uses pgk/tarsum to get a digest of content which is
ADD'd or COPY'd during a build. The builder has always used v0 of
the tarsum algorithm which includes mtimes however since the whole
file is hashed anyway, the mtime doesn't really provide any extra
information about whether the file has changed and many version
control tools like Git strip mtime from files when they are cloned.
This patch updates the build subsystem to use v1 of Tarsum which
explicitly ignores mtime when calculating a digest. Now ADD and
COPY will result in a cache hit if only the mtime and not the file
contents have changed.
NOTE: Tarsum is NOT a meant to be a cryptographically secure hash
function. It is a best-effort approach to determining if two sets of
filesystem content are different.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
When the daemon is going down trigger immediate
garbage collection of libnetwork resources deleted
like namespace path since there will be no way to
remove them when the daemon restarts.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Labels are metadata that apply to a particular resource: image,
container, maybe volumes and networks in the future. We shouldn't have
containers inherit from its image labels: they are not the same obejcts,
and labels cannot be interpreted in the way.
It remains possible to apply metadata to an image using the LABEL
Dockerfile instruction, to query them using `docker inspect <img>`, or
to filter images on them using `docker images --filter <key>=<value>`.
Fixes#13770.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
This removes complexity of current implementation and makes the test
correct and assert the right things.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Fixes#13107. This change enables Go duration strings
computed relative to the client machine’s time to be used
as input parameters to `docker events --since/--until`
and `docker logs --since` arguments.
Added unit tests for pkg/timeutils.GetTimestamp as well.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
Move some calls to container.LogEvent down lower so that there's
less of a chance of them being missed. Also add a few more events
that appear to have been missed.
Added testcases for new events: commit, copy, resize, attach, rename, top
Signed-off-by: Doug Davis <dug@us.ibm.com>
Change CLI error msg because it was too specific and didn't make sense
when there were errors not related to inaccessible files.
Removed some log.Error() calls since they're not really errors we should
log. Returning the error will be enough.
Closes: #13417
Signed-off-by: Doug Davis <dug@us.ibm.com>
It is already possible to set labels at commit when using the API. But
it is not present in the API documentation. Added an integration test
too, to validate this work (and will be in the future).
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Merge user specified devices correctly with default devices.
Otherwise the user specified devices end up without permissions.
Signed-off-by: David R. Jenni <david.r.jenni@gmail.com>
This ensures that AppArmor, not other mechanisms used
by Docker or the kernel is restricting the mount.
Signed-off-by: Eric Windisch <eric@windisch.us>
UnmountVolumes used to also unmount 'specialMounts' but it no longer does after
a recent refactor of volumes. This patch corrects this behavior to include
unmounting of `networkMounts` which replaces `specialMounts` (now dead code).
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
* Don't AllocateNetwork when network is disabled
* Don't createNetwork in execdriver when network is disabled
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Continues 11858 by:
- Making sure the exit code is always zero when we ask for help
- Making sure the exit code isn't zero when we print help on error cases
- Making sure both short and long usage go to the same stream (stdout vs stderr)
- Making sure all docker commands support --help
- Test that all cmds send --help to stdout, exit code 0, show full usage, no blank lines at end
- Test that all cmds (that support it) show short usage on bad arg to stderr, no blank line at end
- Test that all cmds complain about a bad option, no blank line at end
- Test that docker (w/o subcmd) does the same stuff mentioned above properly
Signed-off-by: Doug Davis <dug@us.ibm.com>
We should let user create container even if the container he wants
join is not running, that check should be done at start time.
In this case, the running check is done by getIpcContainer() when
we start container.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>