Adding in other areas per comments
Updating with comments; equalizing generating man page info
Updating with duglin's comments
Doug is right here again;fixing.
Signed-off-by: Mary Anthony <mary@docker.com>
This highlights `RUN`, `CMD`, and `ENTRYPOINT` lines using shell highlighting. It doesn't bother detecting the JSON forms, but that's OK because JSON arrays highlight pretty reasonably with shell highlights. :)
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
Ubuntu Precise has a number of warts that made it non-trivial to add initially, but I've managed to work through some of them and come up with a working build. Two important parts to note are that it has neither the `btrfs` nor the `devicemapper` graphdriver backends since `btrfs-tools` and `libdevmapper-dev` in the precise repositories are too ancient for them to even compile.
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
This will now properly check whether /etc/init.d/docker or service docker is
invoking the script and respond to the user accordingly.
Signed-off-by: Steven Richards <steven@axiomzen.co>
Give Docker more time to kill containers before upstart kills Docker.
The default kill timeout is 5 seconds.
This will help decrease the chance of but not eliminate the chance of
orphaned container processes.
Signed-off-by: David Xia <dxia@spotify.com>
This stops us from erroneously adding "squeeze-lts" to "oldstable" which is now "wheezy", not "squeeze" (but "oldoldstable" _is_ squeeze, hence the new check on `/etc/debian_version` being `6.*` instead, and done as a `case` for the eventual addition of `wheezy-lts`, etc).
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
Currently check-config.sh just said enable or missing, when I used
a fresh kernel, made check-config.sh happy, still can't start
container. It take me days debuging kernel and Docker and finally
found it's because I enabled some CONFIGs as modules and never
loaded these modules.
So I think it's necessary to let check-config.sh told users which
configs are enabled as modules.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Added --since argument to `docker logs` command. Accept unix
timestamps and shows logs only created after the specified date.
Default value is 0 and passing default value or not specifying
the value in the request causes parameter to be ignored (behavior
prior to this change).
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
Also, `curl` is smart enough to see when the consumer of the pipe is going slow that it should slow down the transfer, so this gives a reasonable indication of extraction progress too.
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
To account for "/" not working in filenames, we replace it with "_" for our temporary files (that exist only to emulate Bash 4's associative arrays in Bash 3).
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
Adds a `stream` query param to the stats API which allows API users to
only collect one stats entry and disconnect instead of keeping the
connection alive to stream more stats.
Also adds a `--no-stream` flag to `docker stats` which does the same
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
With this, `docker pull deb<tab>` will show all `debian:*` tags, as before, but `docker pull -a deb<tab>` will complete directly to just `debian`. 👍
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
in https://docs.docker.com/articles/ambassador_pattern_linking/
svendowideit/ambassador images is from docker-ut built using this script
and uses socat but socat complains as follows
socat: error while loading shared libraries: libreadline.so.5: cannot open shared object file: No such file or directory
socat: error while loading shared libraries: libssl.so.1.0.0: cannot open shared object file: No such file or directory
socat: error while loading shared libraries: libcrypto.so.1.0.0: cannot open shared object file: No such file or directory
socat: error while loading shared libraries: libtinfo.so.5: cannot open shared object file: No such file or directory
/usr/lib/x86_64-linux-gnu/lib{crypto,ssl}.so* lib are symlinks so removing -P option from cp
adding libreadline.so and libtinfo.so
Signed-off-by: Jinsoo Park <cellpjs@gmail.com>
update libssl.so path
Signed-off-by: Jinsoo Park <cellpjs@gmail.com>
Remove mkimage-unittest.sh
Signed-off-by: Jinsoo Park <cellpjs@gmail.com>
Once the job has failed and is respawned, the status becomes `docker
respawn/post-start` after subsequent failures (as opposed to `docker
stop/post-start`), so the post-start script needs to take this into
account.
I could not find specific documentation on the job transitioning to the
`respawn/post-start` state, but this was observed on Ubuntu 14.04.2.
Signed-off-by: Lewis Marshall <lewis@lmars.net>
dockerize-image tool takes a virtual disk image file
and creates a Docker image based on it. You can
specify a base Docker image to make this tool create
an image that will contain only filesystem diff
instead of full filesystem.
See tools usage for details.
Signed-off-by: Maxim Kulkin <maxim.kulkin@gmail.com>
The validation script from #10681 is too pedantic, and does not handle
well situations like:
```
cat <<EOF # or <<-EOF
Whether the leading whitespace is stripped out or not by bash
it should still be considered as valid.
EOF
```
This reverts commit 4e65c1c319.
Signed-off-by: Tibor Vass <tibor@docker.com>
The previous state assumed that the HOSTPATH argument referred to a
file. As clarified by moxiegirl in PR #11305, it is a directory.
Adjusted completion to reflect this.
Signed-off-by: Harald Albers <github@albersweb.de>
Created a validation that detects all trailing whitespaces from every
text file that isn't *.go, *.md, vendor/*,
docs/theme/mkdocs/tipuesearch*
Removed trailing whitespaces from every text file except from vendor/*
builder/parser/testfiles*, docs/theme/mkdocs/tipuesearch* and *.md
Signed-off-by: André Martins <martins@noironetworks.com>
This makes APT be appropriately aggressive about removing packages it added due to `Recommends` or `Depends` if the packages they were added for are removed (even if other packages only have the softer `Suggests` relationship).
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
This also removes the now-defunct `*maintainer*.sh` scripts that don't work with the new TOML format, and moves a couple not-build-or-release-related scripts to `contrib/` instead.
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
Save "LABEL" field in Dockerfile into image content.
This will allow a user to save user data into an image, which
can later be retrieved using:
docker inspect IMAGEID
I have copied this from the "Comment" handling in docker images.
We want to be able to add Name/Value data to an image to describe the image,
and then be able to use other tools to look at this data, to be able to do
security checks based on this data.
We are thinking about adding version names,
Perhaps listing the content of the dockerfile.
Descriptions of where the code came from etc.
This LABEL field should also be allowed to be specified in the
docker import --change LABEL:Name=Value
docker commit --change LABEL:Name=Value
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
See also https://bugs.gentoo.org/show_bug.cgi?id=536546:
```console
$ docker run learn/tutorial echo "hello world"
FATA[0001] Error response from daemon: Cannot start container 1d0c0ca5cc7f39a271ec40c1479a80bffb7190fab97392b3453a1fc0b2dc8e78: mountpoint for cpuset not found
```
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
Qiang Huang
Jessie Frazelle
Michael Crosby
David Calavera
Asbjørn Enge
Robin Schneider
Mary Anthony
Tianon Gravi
Eric-Olivier Lamey
Harald Albers
Steven Richards
Jessica Frazelle
Alexander Morozov
David Xia
Shishir Mahajan
Sebastiaan van Stijn
Tibor Vass
Ahmet Alp Balkan
Ma Shimiao
Jörg Thalheim
Matt Bentley
Brian Goff
Jessica Frazelle
David Mackey
Jinsoo Park
Lei Jitang
Vincent Batts
Michael Crosby
Evan Hazlett
Eric Windisch
Arnaud Porterie
Alexander Morozov
Jun-Ru Chang
Lewis Marshall
Maxim Kulkin
Antonio Murdaca
YAMADA Tsuyoshi
Tibor Vass
André Martins
Dan Walsh