The docker graph call driver.Exists() on initialisation for each filesystem in
the graph. This results will results in a lot `zfs get all` commands. To reduce
this, retrieve all descend filesystem at startup and cache it for later checks
Signed-off-by: Jörg Thalheim <joerg@higgsboson.tk>
instead of let zfs automaticly mount datasets, mount them on demand using mount(2).
This speed up this graph driver in 2 ways:
- less zfs processes needed to start a container
- /proc/mounts get smaller, so zfs userspace tools has less to read (which can
a significant amount of data as the number of layer grows)
This ways it can be also ensured that the correct mountpoint is always used.
Signed-off-by: Jörg Thalheim <joerg@higgsboson.tk>
Right now devicemapper mounts thin device using online discards by default
and passes mount option "discard". Generally people discourage usage of
online discards as they can be a drain on performance. Instead it is
recommended to use fstrim once in a while to reclaim the space.
In case of containers, we recommend to keep data volumes separate. So
there might not be lot of rm, unlink operations going on and there might
not be lot of space being freed by containers. So it might not matter
much if we don't reclaim that free space in pool.
User can still pass mount option explicitly using dm.mountopt=discard to
enable discards if they would like to.
So this is more like setting the containers by default for better performance
instead of better space efficiency in pool. And user can change the behavior
if they don't like default behavior.
Reported-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
If device is being reactivated before it could go away and deferred
deactivation is scheduled on it, cancel it.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
This will help with debugging as one could just do "docker info" and figure
out of deferred removal is enabled or not.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Provide a new command line knob dm.deferred_device_removal which will enable
deferred device deactivation if driver and library support it.
This patch also checks for library support and driver version.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Before this, a storage driver would be defaulted to based on the
priority list, and only print a warning if there is state from other
drivers.
This meant a reordering of priority list would "break" users in an
upgrade of docker, such that there images in the prior driver's state
were now invisible.
With this change, prior state is scanned, and if present that driver is
preferred.
As such, we can reorder the priority list, and after an upgrade,
existing installs with prior drivers can have a contiguous experience,
while fresh installs may default to a driver in the new priority list.
Ref: https://github.com/docker/docker/pull/11962#issuecomment-88274858
Signed-off-by: Vincent Batts <vbatts@redhat.com>
Signed-off-by: Megan Kostick <mkostick@us.ibm.com>
Alphabetize FSMagic list to make more human-readable.
Signed-off-by: Megan Kostick <mkostick@us.ibm.com>
This provides an override for forcing the daemon to still attempt
running the devicemapper driver even when udev sync is not supported.
Intended to be a very clear impairment for those choosing to use it. If
udev sync is false, there will still be an error in the daemon logs,
even when the override is in place. The docs have an explicit WARNING.
Including link to the docs for users that encounter this daemon error
during an upgrade.
Signed-off-by: Vincent Batts <vbatts@redhat.com>
Right now we try device removal at the interval of 10ms and keep on trying
till either device is removed or 10 seconds are over. That means if device
is busy, we will try 1000 times in those 10 seconds.
Sounds too high a frequency of deivce removal retrial. All the logs are
filled easily. I think it is a good idea to slow down a bit and retry at
the interval of 100ms instead of 10ms.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
During device removal, we are first waiting for device to close() in a tight
loop for 10 seconds. I am not sure why do we need it. First of all we come
here once the umount() is successful so device should be free. For some reason
of device is temporarily busy, then removeDevice() logic retries device removal
logic in a loop for 10 seconds and that should cover it. Can't see why one
more 10 seoncds loop is required before attempting device removal.
One loop should be able to cover all the temporary device busy conditions and
if condition is not temporary then 10 seconds loop is not going to help anyway.
So instead of two loops of 10 seconds each, I am converting it to a single
loop of 20 seconds. May be 10 second loop is good enough but for now I am
keeping it 20 seconds to avoid any regressions.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Currently in device removal path (device deactivation), we wait
for 10 seconds for devive to actually go away. waitRemove().
In current code this is not required. If dm removal task has completed
and one has done the wait on udev cookie, then device is gone and there
is no need to write another loop to wait for device removal.
This patch removes the waitRemove() which waits for 10 seconds after
device removal. This seems unnecessary.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
devmapper graph driver retries device removal 1000 times in case of failure
and if this fills up console with 1000 messages (when daemon is running in
debug mode). So remove these debug messages.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
There are issues with libdm logging. Right now if docker daemon is run
in debug mode, logging by libdm is too verbose. And if a device can't
be removed, thousands of messages fill the console and one can not see
what's going on.
This patch removes devicemapper.LogInitVerbose() call as that call will
only work if docker was not registering its own log handler with libdm.
For some reason docker registers one with libdm and libdm hands over
all the messages to docker (including debug ones). And now it is up to
devmapper backend to figure out which ones should go to console and
which ones should not.
So by default log only fatal messages from libdm. One can easily modify
the code to change it for debugging purposes.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
It's about time to let folks not hit 'vfs', when 'overlay' is supported
on their kernel. Especially now that v3.18.y is a long-term kernel.
Signed-off-by: Vincent Batts <vbatts@redhat.com>
Automatically detect support for aufs `dirperm1` option and apply it.
`dirperm1` tells aufs to check the permission bits of the directory on the
topmost branch and ignore the permission bits on all lower branches.
It can be used to fix aufs' permission bug (i.e., upper layer having
broader mask than the lower layer).
More information about the bug can be found at https://github.com/docker/docker/issues/783
`dirperm1` man page is at: http://aufs.sourceforge.net/aufs3/man.html
Signed-off-by: Daniel, Dao Quang Minh <dqminh89@gmail.com>
We removed it, because upstream removed it. But now it will be coming
back, so work with it either way.
Signed-off-by: Vincent Batts <vbatts@redhat.com>
They say we should only use the BTRFS_LIB_VERSION
They will no longer support this since it had to be managed manually
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
In several cases graphdriver were just returning the low-level syscall
error and that was making it all the way up to the daemon logs and in
many cases was difficult to tell it was even coming from the graphdriver
at all.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
daemon/volumes.go
This SetFileCon call made no sense, it was changing the labels of any
directory mounted into the containers SELinux label. If it came from me,
then I apologize since it is a huge bug.
The Volumes Mount code should optionally do this, but it should not always
happen, and should never happen on a --privileged container.
The change to
daemon/graphdriver/vfs/driver.go, is a simplification since this it not
a relabel, it is only a setting of the shared label for docker volumes.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
when initializing the devmapper driver, attempt to sync udev and device
mapper. If udev sync is not supported, print a warning. Eventually we'll
likely bail here to avoid unpredictable behavior for users.
Signed-off-by: Vincent Batts <vbatts@redhat.com>
Fixes#9960
This adds the output of a "Backing Filesystem:" entry to `docker info`
to overlay, aufs, and devicemapper graphdrivers. The default list
includes a fairly complete list of common filesystem names from
linux/include/uapi/linux/magic.h, but if the backing filesystem is not
recognized, the code will simply show "<unknown>"
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com>
There are a couple of drivers that swallow errors that may occur in
their Put() implementation.
This changes the signature of (*Driver).Put for all the drivers implemented.
Signed-off-by: Vincent Batts <vbatts@hashbangbash.com>
Presenly the "Data file:" shows either the loopback _file_ or the block device.
With this, the "Data file:" will always show the device, and if it is a
loopback, then there will additionally be a "Data loop file:".
(Same for "Metadata file:")
Signed-off-by: Vincent Batts <vbatts@redhat.com>
`uint64(buf.Type)` on i686 is ffffffff9123683e on i686 due to sign extension, so it cannot be compared with `FsMagic(0x9123683E)`
Signed-off-by: Andrii Melnykov <andy.melnikov@gmail.com>
If .dockerignore mentions either then the client will send them to the
daemon but the daemon will erase them after the Dockerfile has been parsed
to simulate them never being sent in the first place.
an events test kept failing for me so I tried to fix that too
Closes#8330
Signed-off-by: Doug Davis <dug@us.ibm.com>
syscall.Unmount failed sometimes when user interrupted exporting,
for example a Ctrl-C, or pipe to commands which closed the pipe early,
like "docker export <container_name> | file -"; this syscall.Unmount
could sometimes return EBUSY and didn't actually umount the filesystem;
which would cause a following export command fail to mount;
change to lazy Unmount with MNT_DETACH can fix the problem, this is
the same behavior as in Shutdown;
```text
time="2015-01-03T21:27:26Z" level=error msg="Warning: error unmounting device
34a3e77cdbca17ceffd0636aee0415bb412996adb12360bfe2585ce30467fa8e: device or resource busy"
```
```
$ docker export thirsty_ardinghelli | file -
/dev/stdin: POSIX tar archive
time="2015-01-03T21:58:17Z" level=fatal msg="write /dev/stdout: broken pipe"
$ docker export thirsty_ardinghelli
time="2015-01-03T21:54:33Z" level=fatal msg="Error: thirsty_ardinghelli: Error getting container
34a3e77cdbca17ceffd0636aee0415bb412996adb12360bfe2585ce30467fa8e from driver devicemapper:
Error mounting '/dev/mapper/docker-253:0-3148372-34a3e77cdbca17ceffd0636aee0415bb412996adb12360bfe2585ce30467fa8e'
on '/var/lib/docker/devicemapper/mnt/34a3e77cdbca17ceffd0636aee0415bb412996adb12360bfe2585ce30467fa8e': device or resource busy"
```
Signed-off-by: Derek Che <drc@yahoo-inc.com>
Jörg Thalheim
Alexander Morozov
Burke Libbey
Vincent Batts
unclejack
Vivek Goyal
Antonio Murdaca
Megan Kostick
Vincent Batts
Tibor Vass
Michael Crosby
Michael Crosby
Brian Goff
Peter Choi
Daniel, Dao Quang Minh
Anes Hasicic
Jimmy Puckett
Dan Walsh
Michal Minar
Arnaud Porterie
Deng Guangxing
Qiang Huang
Martijn Dwars
Lei Jitang
Jessie Frazelle
Phil Estes
Mabin
Srini Brahmaroutu
Peter Volpe
Tibor Vass
Sven Dowideit
Jessica Frazelle
unclejack
Phil Estes
Alexander Morozov
nponeccop
Doug Davis
Derek
daehyeok mun
Pierre Wacrenier