Addresses #5811
This cleans up an error in the logic which removes localhost resolvers
from the host resolv.conf at container creation start time. Specifically
when the determination is made if any nameservers are left after
removing localhost resolvers, it was using a string match on the word
"nameserver", which could have been anywhere (including commented out)
leading to incorrect situations where no nameservers were left but the
default ones were not added.
This also adds some complexity to the regular expressions for finding
nameservers in general, as well as matching on localhost resolvers due
to the recent addition of IPv6 support. Because of IPv6 support now
available in the Docker daemon, the resolvconf code is now aware of
IPv6 enable/disable state and uses that for both filter/cleaning of
nameservers as well as adding default Google DNS (IPv4 only vs. IPv4
and IPv6 if IPv6 enabled). For all these changes, tests have been
added/strengthened to test these additional capabilities.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
See #10141 for more info, but the main point of this is to make sure
that if you do "docker run -e FOO ..." that FOO from the current env
is passed into the container. This means that if there's a value, its
set. But it also means that if FOO isn't set then it should be unset in
the container too - even if it has to remove it from the env. So,
unset HOSTNAME
docker run -e HOSTNAME busybox env
should _NOT_ show HOSTNAME in the list at all
Closes#10141
Signed-off-by: Doug Davis <dug@us.ibm.com>
To run shell(and not exit), lxc needs STDIN. Without STDIN open, it will exit 0.
Signed-off-by: Abin Shahab <ashahab@altiscale.com> (github: ashahab-altiscale)
Fixes#9709
In cases where the volumes-from container is removed and the consuming
container is restarted, docker was trying to re-apply volumes from that
now missing container, which is uneccessary since the volumes are
already applied.
Also cleaned up the volumes-from parsing function, which was doing way more than
it should have been.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Sending capability ids instead of capability names ot LXC for --cap-add and --cap-drop.
Also fixed tests.
Docker-DCO-1.1-Signed-off-by: Abin Shahab <ashahab@altiscale.com> (github: ashahab-altiscale)
Add a --readonly flag to allow the container's root filesystem to be
mounted as readonly. This can be used in combination with volumes to
force a container's process to only write to locations that will be
persisted. This is useful in many cases where the admin controls where
they would like developers to write files and error on any other
locations.
Closes#7923Closes#8752
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Only modifies non-running containers resolv.conf bind mount, and only if
the container has an unmodified resolv.conf compared to its contents at
container start time (so we don't overwrite manual/automated changes
within the container runtime). For containers which are running when
the host resolv.conf changes, the update will only be applied to the
container version of resolv.conf when the container is "bounced" down
and back up (e.g. stop/start or restart)
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Forbid `docker run -t` with a redirected stdin (such as `echo test |
docker run -ti busybox cat`). Forbid `docker exec -t` with a redirected
stdin. Forbid `docker attach` with a redirect stdin toward a tty enabled
container.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
Sometimes other programs can bind on ports from our range, so we just
skip this ports on allocation.
Fixes#9293
Probably fixes#8714
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
I also needed to add a mflag.IsSet() function that allows you to check
to see if a certain flag was actually specified on the cmd line.
Per #9221 - also tweaked the docs to fix a typo.
Closes#9221
Signed-off-by: Doug Davis <dug@us.ibm.com>
This adds an integration test for checking that the network namespace
fds are the same when a container joins another container's network
namespace.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Common patterns:
- Multiple images were built with same name but only one cleanup.
- Containers were deleted after images.
- Images not removed after retagging.
Signed-off-by: Tõnis Tiigi <tonistiigi@gmail.com> (github: tonistiigi)
Next steps, in another PR, would be:
- make all logging go through the logrus stuff
- I'd like to see if we can remove the env var stuff (like DEBUG) but we'll see
Closes#5198
Signed-off-by: Doug Davis <dug@us.ibm.com>
Some workloads rely on IPC for communications with other processes. We
would like to split workloads between two container but still allow them
to communicate though shared IPC.
This patch mimics the --net code to allow --ipc=host to not split off
the IPC Namespace. ipc=container:CONTAINERID to share ipc between containers
If you share IPC between containers, then you need to make sure SELinux labels
match.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
Never close attached stream before both stdout and stderr have written
all their buffered contents. Remove stdinCloser because it is not needed
any more as the stream is closed anyway after attach has finished.
Fixes#3631
Signed-off-by: Andy Goldstein <agoldste@redhat.com>
Stable IPs causes some regressions in the way people use Docker, see GH#8493.
Reverting it for 1.3, we'll enable it back for the next release.
Signed-off-by: Andrea Luzzardi <aluzzardi@gmail.com>
When a container is restarted all the volume configs are parsed again.
Even if the volume was already handled in a previous start it was still
calling "FindOrCreateVolume" on the volume repo causing a new volume to
be created.
This wasn't being detected because as part of the mount initialization
it checks to see if the the _mount_ was already initialized, but this
happens after the parsing of the configs.
So a check is added during parsing to skip a volume which was already
created for that container.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
When stdout/stderr is closed prematurely, the proxy's writes to stdout/stderr
(i.e. `log.Errorf/log.Printf`) will returns with EPIPE error, and go runtime
will terminate the proxy when stdout/stderr writes trigger 10 EPIPE errors.
instead of using stdout/stderr as the status handler, we pass an extra file to
the child process and write `0\n` or `1\nerror message` to it and close it
after. This allow the child process to handle stdout/stderr as normal.
Docker-DCO-1.1-Signed-off-by: Daniel, Dao Quang Minh <dqminh89@gmail.com> (github: dqminh)
Prior to the volumes re-factor, data was not being copied on
volumes-from or host-mounted volumes.
After the re-factor, data was being copied for volumes-from.
This reverts this unintentional change in behavior.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Needed to check if the mode was invalid and return error, not valid and
return error.
This didn't get picked up because the existing integration-cli tests
were all either expecting errors when a valid mode was passed in (e.g.
"ro" passed in, we expected an error because it was testing write). So
modified a test which was testing for "rw" to actually pass in "rw"
instead of assuming the "rw"
Docker-DCO-1.1-Signed-off-by: Brian Goff <bgoff@cpuguy83-mbp.home> (github: cpuguy83)
This change will allocate network settings (IP and public ports) at
container creation rather than start and keep them throughout the
lifetime of the container (i.e. until it gets destroyed) instead of
discarding them when the container is stopped.
Signed-off-by: Andrea Luzzardi <aluzzardi@gmail.com>
volumes.Get was not checking for symlinked paths meanwhile when adding a
new volume it was following the symlink.
So when trying to use a bind-mount that is a symlink, the volume is
added with the correct path, but when another container tries to use the
same volume it got a "Volume exists" error because volumes.Get returned
nil and as such attempted to create a new volume.
Docker-DCO-1.1-Signed-off-by: Brian Goff <cpuguy83@gmail.com> (github: cpuguy83)
This adds a --add-host host:ip flag which appends lines to /etc/hosts. This is needed in places where you want the container to get a different name resolution than it would through DNS. This was submitted before as #5525, closed, and now I am re-opening. It has come up 2 or 3 times in the last couple days.
Signed-off-by: Tim Hockin <thockin@google.com>
Alexander Morozov
Michael Crosby
Phil Estes
Jessie Frazelle
Doug Davis
Abin Shahab
Brian Goff
Michael Crosby
Alexander Morozov
Lei Jitang
Arnaud Porterie
Srini Brahmaroutu
Jessica Frazelle
Ian Bishop
Yohei Ueda
Erik Hollensbe
Daehyeok Mun
unclejack
Tonis Tiigi
Dan Walsh
Malte Janduda
Andy Goldstein
Andrea Luzzardi
Daniel, Dao Quang Minh
Brian Goff
Tibor Vass
Victor Vieux
unclejack
Tim Hockin
Vishnu Kannan