Commit Graph

903 Commits

Author SHA1 Message Date
Erik Hollensbe 8d7683af86 Remove "OMG IPV6" log message
Signed-off-by: Erik Hollensbe <erik+github@hollensbe.org>
2015-01-31 13:21:06 -08:00
Tibor Vass 3b0326fc81 Merge pull request #10441 from brahmaroutu/enable_ibm_power_z
Adding IBM Power and Z as valid platforms to the docker
2015-01-30 11:48:41 -05:00
Srini Brahmaroutu 7d7a002e51 Removing the check on Architecture to build and run Docker on IBM Power and Z platforms
Signed-off-by: Srini Brahmaroutu <srbrahma@us.ibm.com>
2015-01-30 16:16:17 +00:00
Alexander Morozov e7f6433109 Remove explicit setting of ExitCode
That will be set in defer anyway. Also there was race between setting
ExitCode and inspect.

Signed-off-by: Alexander Morozov <lk4d4@docker.com>
2015-01-29 14:50:42 -08:00
Arnaud Porterie 45ef269498 Merge pull request #10406 from estesp/fixup-ipv6-bridge-creation
Fix bridge initialization for IPv6 if IPv4-only docker0 exists
2015-01-28 10:17:45 -08:00
Phil Estes 0c8d17b5c1 Fix bridge initialization for IPv6 if IPv4-only docker0 exists
This fixes the daemon's failure to start when setting --ipv6=true for
the first time without deleting `docker0` bridge from a prior use with
only IPv4 addressing.

The addition of the IPv6 bridge address is factored out into a separate
initialization routine which is called even if the bridge exists but no
IPv6 addresses are found.

Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
2015-01-27 23:54:26 -05:00
Liu Hua 71f8b09543 fix a minor typo in daemon/container.go
Signed-off-by: Liu Hua <sdu.liu@huawei.com>
2015-01-28 09:54:40 +08:00
Abin Shahab 9c744cb454 Fixes apparmor regression
Signed-off-by: Abin Shahab <ashahab@altiscale.com> (github: ashahab-altiscale)
Docker-DCO-1.1-Signed-off-by: Abin Shahab <ashahab@altiscale.com> (github: ashahab-altiscale)
2015-01-22 07:06:46 +00:00
Michael Crosby 364c64cf1a Merge pull request #10295 from ashahab-altiscale/9875-lxc-exit-code
Adds ipc namespace capability to lxc, and fixes tests.
2015-01-26 11:21:48 -08:00
unclejack 990a3e30fa Merge pull request #10315 from jfrazelle/overlay-zfs
Blacklist zfs with overlay
2015-01-24 09:04:37 +02:00
Jonathan Rudenberg d5c78a4c07 Fix missing err assignment in bridge creation
Signed-off-by: Jonathan Rudenberg <jonathan@titanous.com>
2015-01-23 14:48:28 -08:00
Jessica Frazelle ec953b0e7b Blacklist zfs with overlay
Docker-DCO-1.1-Signed-off-by: Jessica Frazelle <jess@docker.com> (github: jfrazelle)
2015-01-23 14:00:15 -08:00
Michal Minar 310337dc89 Stop and Kill commands made robust
If stop/kill command hits a short window between process' exit and
container's cleanup, it will no longer fail with 'no such process'
error.

Resolves #10182

Signed-off-by: Michal Minar <miminar@redhat.com>
2015-01-23 10:26:13 +01:00
Jessie Frazelle f1bc0376b8 Merge pull request #10254 from LK4D4/fix_etchosts_rewriting
Fix etchosts rewriting
2015-01-21 15:08:45 -08:00
Alexander Morozov c2a25058e8 Update links aliases, not name on restart
Fixes #8721

Signed-off-by: Alexander Morozov <lk4d4@docker.com>
2015-01-21 14:34:27 -08:00
Michael Crosby b8fe989b9b Merge pull request #10187 from jfrazelle/update-skip-graphtest
update graphtest
2015-01-21 14:09:16 -08:00
Brian Goff 811b138f7e Fix call to nil stat
Fixes #10242

Signed-off-by: Brian Goff <cpuguy83@gmail.com>
2015-01-21 14:25:35 -05:00
Michael Crosby 4b173199fd Exit cli when all containers when no more containers to monitor
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
2015-01-21 08:55:23 -08:00
Abin Shahab 3ca5af6b1a Adds ipc namespace capability to lxc, and fixes tests.
This fixes various tests by checking for non zero exit code, accounting for lxc-specific base-diffs, and by removing lxc specific environment vars.
It also adds the --share-ipc option to lxc-start for shared ipc namespaces.
Signed-off-by: Abin Shahab <ashahab@altiscale.com> (github: ashahab-altiscale)
Docker-DCO-1.1-Signed-off-by: Abin Shahab <ashahab@altiscale.com> (github: ashahab-altiscale)
2015-01-21 06:08:00 +00:00
Michael Crosby 217a2bd1b6 Remove publisher if no one is listening
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
2015-01-20 20:21:47 -08:00
Michael Crosby 2f46b7601a Add pubsub package to handle robust publisher
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
2015-01-20 20:21:46 -08:00
Michael Crosby 2d4fc1de05 Refactor usage calc for CPU and system usage
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
2015-01-20 20:21:46 -08:00
Michael Crosby 4f174aa792 Evict stopped containers
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
2015-01-20 20:21:46 -08:00
Michael Crosby 2640a10bca Implement client side display for stats
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
2015-01-20 20:21:46 -08:00
Michael Crosby 65f58e2a74 Implement container stats collection in daemon
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
2015-01-20 20:21:46 -08:00
Michael Crosby cac17f990b Merge pull request #10205 from ashahab-altiscale/9875-non-privileged-proc-sys
use lxc.auto.mount to ensure proc and sys are readonly
2015-01-20 17:54:56 -08:00
Vincent Batts 9b2afa04f8 Merge pull request #10222 from vbatts/vbatts-dm_flag_and_output
dm flag and output
2015-01-20 18:45:43 -05:00
Brian Goff e744b0dcba Fix volume ref restore process
Fixes #9629 #9768

A couple of issues:

1) Volume config is not restored if we couldn't find it with the graph
driver, but bind-mounts would never be found by the graph driver since
they aren't in that dir

2) container volumes were only being restored if they were found in the
volumes repo, but volumes created by old daemons wouldn't be in the
repo until the container is at least started.

Signed-off-by: Brian Goff <cpuguy83@gmail.com>
2015-01-20 15:54:56 -05:00
Vincent Batts fa7af79885 Merge pull request #10193 from vbatts/vbatts-dm_logging
devmapper: initialize log levels
2015-01-20 14:06:01 -05:00
Vincent Batts 0c8be9da37 devmapper: initialize log levels
Signed-off-by: Vincent Batts <vbatts@redhat.com>
2015-01-20 13:31:19 -05:00
Alexander Morozov e9d3e237e5 Merge pull request #10005 from estesp/fix-localhost-nameserver-cleanup
Clean up localhost resolv logic and add IPv6 support to regexp
2015-01-20 10:30:06 -08:00
Phil Estes 93d51e5e97 Clean up localhost resolv logic and add IPv6 support to regexp
Addresses #5811

This cleans up an error in the logic which removes localhost resolvers
from the host resolv.conf at container creation start time. Specifically
when the determination is made if any nameservers are left after
removing localhost resolvers, it was using a string match on the word
"nameserver", which could have been anywhere (including commented out)
leading to incorrect situations where no nameservers were left but the
default ones were not added.

This also adds some complexity to the regular expressions for finding
nameservers in general, as well as matching on localhost resolvers due
to the recent addition of IPv6 support.  Because of IPv6 support now
available in the Docker daemon, the resolvconf code is now aware of
IPv6 enable/disable state and uses that for both filter/cleaning of
nameservers as well as adding default Google DNS (IPv4 only vs. IPv4
and IPv6 if IPv6 enabled).  For all these changes, tests have been
added/strengthened to test these additional capabilities.

Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
2015-01-19 19:35:55 -05:00
Vincent Batts a09a665d99 devmapper: some explination of `docker info`
Signed-off-by: Vincent Batts <vbatts@hashbangbash.com>
2015-01-19 17:37:08 -05:00
Vincent Batts 4cfe9df0a9 devicemapper: debug output specifics
moar information for the information gods

Signed-off-by: Vincent Batts <vbatts@redhat.com>
2015-01-19 17:21:10 -05:00
unclejack 2d61a62378 Merge pull request #10195 from vbatts/vbatts-dm_udev_sync
device-mapper udev sync
2015-01-20 00:06:29 +02:00
Jessie Frazelle 9b4cd01b21 Merge pull request #9730 from cpuguy83/9709_fix_volumes_from_missing_container
Fix volumes-from re-applying on each start
2015-01-19 14:00:53 -08:00
Vincent Batts d2593546f9 devmapper: udev sync in `docker info`
now:

```
[...]
Storage Driver: devicemapper
 Pool Name: docker-253:2-5767172-pool
 [...]
 Udev Sync Supported: true
[...]
```

Signed-off-by: Vincent Batts <vbatts@redhat.com>
2015-01-19 16:28:02 -05:00
Vincent Batts 022e1232f8 devmapper: udev sync on init
when initializing the devmapper driver, attempt to sync udev and device
mapper. If udev sync is not supported, print a warning. Eventually we'll
likely bail here to avoid unpredictable behavior for users.

Signed-off-by: Vincent Batts <vbatts@redhat.com>
2015-01-19 15:57:25 -05:00
Jessie Frazelle 8b95ad230e Merge pull request #9784 from dmcgowan/v2-registry
Client Support for Docker Registry HTTP API V2
2015-01-19 10:46:38 -08:00
Michael Crosby 979a4cdacd Merge pull request #10152 from ashahab-altiscale/9875-cap-add-all
SEND CAPABILITY IDS TO LXC
2015-01-19 10:46:22 -08:00
Jessica Frazelle f0d79c021d Update graphtest so when overlay is tried over a non-supported backing
filesystem it will skip.

Docker-DCO-1.1-Signed-off-by: Jessica Frazelle <jess@docker.com> (github: jfrazelle)
2015-01-19 10:28:57 -08:00
Abin Shahab d821c63e0d use lxc.auto.mount to ensure proc and sys are readonly
Set lxc.auto.mount = proc:mixed in unprivilged mode. This ensures that lxc mounts sys and proc/sysrq-trigger as readonly.
Signed-off-by: Abin Shahab <ashahab@altiscale.com> (github: ashahab-altiscale)
Docker-DCO-1.1-Signed-off-by: Abin Shahab <ashahab@altiscale.com> (github: ashahab-altiscale)
2015-01-18 09:27:16 +00:00
Brian Goff a738df0354 Fix volumes-from re-applying on each start
Fixes #9709
In cases where the volumes-from container is removed and the consuming
container is restarted, docker was trying to re-apply volumes from that
now missing container, which is uneccessary since the volumes are
already applied.

Also cleaned up the volumes-from parsing function, which was doing way more than
it should have been.

Signed-off-by: Brian Goff <cpuguy83@gmail.com>
2015-01-17 07:14:25 -05:00
Abin Shahab bff3509e43 SEND CAPABILITY IDS TO LXC
Sending capability ids instead of capability names ot LXC for --cap-add and --cap-drop.
Also fixed tests.

Docker-DCO-1.1-Signed-off-by: Abin Shahab <ashahab@altiscale.com> (github: ashahab-altiscale)
2015-01-17 04:01:52 +00:00
Phil Estes 48b1dd0084 Add backing filesystem info to `docker info` command where applicable
Fixes #9960

This adds the output of a "Backing Filesystem:" entry to `docker info`
to overlay, aufs, and devicemapper graphdrivers. The default list
includes a fairly complete list of common filesystem names from
linux/include/uapi/linux/magic.h, but if the backing filesystem is not
recognized, the code will simply show "<unknown>"

Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com>
2015-01-16 14:43:43 -05:00
Derek McGowan 8ceb9d20d6 Update push to sign with the daemon's key when no manifest is given
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
2015-01-15 14:05:06 -08:00
Jessica Frazelle f88066fd43 ignore vfs from warning
Docker-DCO-1.1-Signed-off-by: Jessica Frazelle <jess@docker.com> (github: jfrazelle)
2015-01-14 17:28:50 -08:00
Victor Vieux 27f69b0777 Merge pull request #10107 from jfrazelle/9328-fix-try-start-paused-container
Error should show when trying to start a paused container.
2015-01-14 17:02:23 -08:00
Jessica Frazelle 02246d2d9f Error should show when trying to start a paused container.
Docker-DCO-1.1-Signed-off-by: Jessica Frazelle <jess@docker.com> (github: jfrazelle)
2015-01-14 16:49:08 -08:00
Alexander Morozov 95c0f07966 Merge pull request #10093 from crosbymichael/readonly-containers
Add --read-only for read only container rootfs
2015-01-14 15:56:51 -08:00