This changes the default behavior so that rolling updates will not
proceed once an updated task fails to start, or stops running during the
update. Users can use docker service inspect --pretty servicename to see
the update status, and if it pauses due to a failure, it will explain
that the update is paused, and show the task ID that caused it to pause.
It also shows the time since the update started.
A new --update-on-failure=(pause|continue) flag selects the
behavior. Pause means the update stops once a task fails, continue means
the old behavior of continuing the update anyway.
In the future this will be extended with additional behaviors like
automatic rollback, and flags controlling parameters like how many tasks
need to fail for the update to stop proceeding. This is a minimal
solution for 1.12.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
(cherry picked from commit 57ae29aa74e77ade3c91b1c77ba766512dae9ab4)
Signed-off-by: Tibor Vass <tibor@docker.com>
There are currently problems with "swarm init" and "swarm join" when an
explicit --listen-addr flag is not provided. swarmkit defaults to
finding the IP address associated with the default route, and in cloud
setups this is often the wrong choice.
Introduce a notion of "advertised address", with the client flag
--advertise-addr, and the daemon flag --swarm-default-advertise-addr to
provide a default. The default listening address is now 0.0.0.0, but a
valid advertised address must be detected or specified.
If no explicit advertised address is specified, error out if there is
more than one usable candidate IP address on the system. This requires a
user to explicitly choose instead of letting swarmkit make the wrong
choice. For the purposes of this autodetection, we ignore certain
interfaces that are unlikely to be relevant (currently docker*).
The user is also required to choose a listen address on swarm init if
they specify an explicit advertise address that is a hostname or an IP
address that's not local to the system. This is a requirement for
overlay networking.
Also support specifying interface names to --listen-addr,
--advertise-addr, and the daemon flag --swarm-default-advertise-addr.
This will fail if the interface has multiple IP addresses (unless it has
a single IPv4 address and a single IPv6 address - then we resolve the
tie in favor of IPv4).
This change also exposes the node's externally-reachable address in
docker info, as requested by #24017.
Make corresponding API and CLI docs changes.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
(cherry picked from commit a0ccd0d42fdb0dd2005f67604cb81a5a6b26787e)
Signed-off-by: Tibor Vass <tibor@docker.com>
Signed-off-by: Harald Albers <github@albersweb.de>
(cherry picked from commit 42b4d6ebe44029155d98d623c9d51f0cda89e194)
Signed-off-by: Tibor Vass <tibor@docker.com>
`--with-registry-auth` is more explicit.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
(cherry picked from commit 8426f72107f351b769babadeabbf13f205126514)
Signed-off-by: Tibor Vass <tibor@docker.com>
Swarm join has been changed in f5e1f6f6880391a5a3399023cf93a3c48502e57d,
removing various options and the "node accept" command.
This removes the removed options from the completion
scripts.
NOTE: a new command ("docker swarm join-token") was
also added, but is not part of this commit.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit c4ab20c5f8c13d9d91dbd29fd41fc0d78f93ab0d)
Signed-off-by: Tibor Vass <tibor@docker.com>
Signed-off-by: Harald Albers <github@albersweb.de>
(cherry picked from commit 6c98d5bfaccda4b211e537f5072767160a20d497)
Signed-off-by: Tibor Vass <tibor@docker.com>
Signed-off-by: Harald Albers <github@albersweb.de>
(cherry picked from commit 492fdf1f57bff10bed5d44bf63f344c1d7961eb2)
Signed-off-by: Tibor Vass <tibor@docker.com>
Signed-off-by: Harald Albers <github@albersweb.de>
(cherry picked from commit bc6e3c0b5e415f09957955782b4d51e94a5ff2b9)
Signed-off-by: Tibor Vass <tibor@docker.com>
Signed-off-by: Harald Albers <github@albersweb.de>
(cherry picked from commit 823e161de73e2df04cd3905b72b7916c49091af4)
Signed-off-by: Tibor Vass <tibor@docker.com>
Signed-off-by: Harald Albers <github@albersweb.de>
(cherry picked from commit e1e310ea1fc47488a7404e3fa52fa606fe270ed0)
Signed-off-by: Tibor Vass <tibor@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 7bf0faf42377a91a8535b443201d9ad62326889b)
Signed-off-by: Tibor Vass <tibor@docker.com>
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
(cherry picked from commit e4a024d5902df1d3db8b9fff8865304afa2305e6)
Signed-off-by: Tibor Vass <tibor@docker.com>
Ref: https://github.com/docker/docker/pull/23324
Signed-off-by: Harald Albers <github@albersweb.de>
(cherry picked from commit c4846f697271d2990cca8481338f4827b2558112)
Signed-off-by: Tibor Vass <tibor@docker.com>
Signed-off-by: Harald Albers <github@albersweb.de>
(cherry picked from commit a394490d3895fe0122b44a3f89acc04946b83bda)
Signed-off-by: Tibor Vass <tibor@docker.com>
Signed-off-by: Harald Albers <github@albersweb.de>
(cherry picked from commit a44e71c4274cd311e99722277cb674b2bc84d86e)
Signed-off-by: Tibor Vass <tibor@docker.com>
Signed-off-by: Harald Albers <github@albersweb.de>
(cherry picked from commit 009d50e2d8c4f74f38ebefe89b8dd44b69b46660)
Signed-off-by: Tibor Vass <tibor@docker.com>
Signed-off-by: Harald Albers <github@albersweb.de>
(cherry picked from commit 715754ee61a83a710f5c0c3974cfed6b453d5595)
Signed-off-by: Tibor Vass <tibor@docker.com>
Signed-off-by: Harald Albers <github@albersweb.de>
(cherry picked from commit 2b34fa0511a5193b1cb07493555872cfd6b70442)
Signed-off-by: Tibor Vass <tibor@docker.com>
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
(cherry picked from commit a859a336475f39c7b7d7739c58a1dae40df86a86)
Signed-off-by: Tibor Vass <tibor@docker.com>
The completion for the new `docker service`, `docker swarm` and
`docker node` command families were partly added in non-alphabetical
order.
Signed-off-by: Harald Albers <github@albersweb.de>
(cherry picked from commit 19753ec84dcd2961adf64c4c66b09a2f4ca3220a)
Make `--dispatcher-heartbeat-period` a duration in `docker swarm
update`, allowing to express the value as "5s", "1h", etc.
Signed-off-by: Arnaud Porterie (icecrime) <arnaud.porterie@docker.com>
Add support for two now filter on the `images` command : `before` and
`since`. They work the same as the one on the `ps` command but for
images.
$ docker images --filter before=myimage
# display all images older than myimage
$ docker images --filter since=myimage
# display all images younger than myimage
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
The filtering is made server-side, and the following filters are
supported:
* is-official (boolean)
* is-automated (boolean)
* has-stars (integer)
Signed-off-by: Fabrizio Soppelsa <fsoppelsa@mirantis.com>
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Aaron Lehmann
Harald Albers
Vincent Demeester
Sebastiaan van Stijn
Mike Goelzer
Arnaud Porterie (icecrime)
Kenfe-Mickael Laventure
Lei Jitang
Dmitry Smirnov
Fabrizio Soppelsa
Mrunal Patel