This fix tries to address issues raised in #20936 and #22443
where `docker pull` or `docker push` fails because of the
concurrent connection failing.
Currently, the number of maximum concurrent connections is
controlled by `maxDownloadConcurrency` and `maxUploadConcurrency`
which are hardcoded to 3 and 5 respectively. Therefore, in
situations where network connections don't support multiple
downloads/uploads, failures may encounter for `docker push`
or `docker pull`.
This fix tries changes `maxDownloadConcurrency` and
`maxUploadConcurrency` to adjustable by passing
`--max-concurrent-uploads` and `--max-concurrent-downloads` to
`docker daemon` command.
The documentation related to docker daemon has been updated.
Additional test case have been added to cover the changes in this fix.
This fix fixes#20936. This fix fixes#22443.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This flag can be set on disk if the daemon were to crash or error out
while trying to remove container in which case subsequent tries to
delete the container would all fail.
Signed-off-by: Kenfe-Mickael Laventure <mickael.laventure@gmail.com>
commit 20a038eca6 changed
daemon configuration reloading to check if a value
was actually set, however, it checked for the wrong
property ("label" instead of "labels"), which resulted
in the labels only to be loaded from daemon.json if both
a "label" -and- a "labels" property was present.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This fix tries to fix the http panics caused by container deletion
with empty names in #22210.
The issue was because when an empty string was passed, `GetByName()`
tried to access the first element of the name string without checking
the length. A length check has been added.
A test case for #22210 has been added.
This fix fixes#22210.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This change allow to filter events that happened in the past
without waiting for future events. Example:
docker events --since -1h --until -30m
Signed-off-by: David Calavera <david.calavera@gmail.com>
Currently if you restart docker daemon, all the containers with restart
policy `on-failure` regardless of its `RestartCount` will be started,
this will make daemon cost more extra time for restart.
This commit will stop these containers to do unnecessary start on
daemon's restart.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
This fix tries to fix the issue in #21848 where `docker stats` will not correctly
display the container stats in case the container reuse another container's
network stack.
The issue is that when `stats` is performed, the daemon will check for container
network setting's `SandboxID`. Unfortunately, for containers that reuse another
container's network stack (`NetworkMode.IsConnected()`), SandboxID is not assigned.
Therefore, the daemon thinks the id is invalid and remote API will never return.
This fix tries to resolve the SandboxID by iterating through connected containers
and identify the appropriate SandboxID.
A test case for `stats` remote API has been added to check if `stats` will return
within the timeout.
This fix fixes#21848.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to fix the discrepancy between API and CLI on hostname
validation. Previously, the hostname validation was handled at the
CLI interface in runconfig/opts/parse.go and return an error if the
hostname is invalid. However, if an end user use the remote API to
pass the hostname, the error will not be returned immediately.
Instead the error will only be thrown out when the container creation
fails. This creates behavior discrepancy between API and CLI.
In this fix, the hostname validation was moved to
verifyContainerSettings so the behavior will be the same for API and
CLI.
After the change, since CLI does not handle the hostname validation
any more, the previous unit tests about hostname validation on CLI
in runconfig/opts/parse_test.go has to be updated as well because
there is no validation at this stage. All those unit tests are moved
to integration test TestRunTooLongHostname so that the hostname
validation is still properly covered as before.
Note: Since the hostname validation moved to API, the error message
changes from `invalid hostname format for --hostname:` to
`invalid hostname format:` as well because `--hostname` is passed
to CLI only.
This fix fixes#21595.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
- Refactor generic and path based cleanup functions into a single function.
- Include aufs and zfs mounts in the mounts cleanup.
- Containers that receive exit event on restore don't require manual cleanup.
- Make missing sandbox id message a warning because currently sandboxes are always cleared on startup. libnetwork#975
- Don't unmount volumes for containers that don't have base path. Shouldn't be needed after #21372
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Fix unmount issues in the daemon crash and restart lifecycle, w.r.t
graph drivers. This change sets a live container RWLayer's activity
count to 1, so that the RWLayer is aware of the mount. Note that
containerd has experimental support for restore live containers.
Added/updated corresponding tests.
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
This adds support for the passthrough on build, push, login, and search.
Revamp the integration test to cover these cases and make it more
robust.
Use backticks instead of quoted strings for backslash-heavy string
contstands.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Changes how the Engine interacts with Registry servers on image pull.
Previously, Engine sent a User-Agent string to the Registry server
that included only the Engine's version information. This commit
appends to that string the fields from the User-Agent sent by the
client (e.g., Compose) of the Engine. This allows Registry server
operators to understand what tools are actually generating pulls on
their registries.
Signed-off-by: Mike Goelzer <mgoelzer@docker.com>
Use token handler options for initialization.
Update auth endpoint to set identity token in response.
Update credential store to match distribution interface changes.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Moving all strings to the errors package wasn't a good idea after all.
Our custom implementation of Go errors predates everything that's nice
and good about working with errors in Go. Take as an example what we
have to do to get an error message:
```go
func GetErrorMessage(err error) string {
switch err.(type) {
case errcode.Error:
e, _ := err.(errcode.Error)
return e.Message
case errcode.ErrorCode:
ec, _ := err.(errcode.ErrorCode)
return ec.Message()
default:
return err.Error()
}
}
```
This goes against every good practice for Go development. The language already provides a simple, intuitive and standard way to get error messages, that is calling the `Error()` method from an error. Reinventing the error interface is a mistake.
Our custom implementation also makes very hard to reason about errors, another nice thing about Go. I found several (>10) error declarations that we don't use anywhere. This is a clear sign about how little we know about the errors we return. I also found several error usages where the number of arguments was different than the parameters declared in the error, another clear example of how difficult is to reason about errors.
Moreover, our custom implementation didn't really make easier for people to return custom HTTP status code depending on the errors. Again, it's hard to reason about when to set custom codes and how. Take an example what we have to do to extract the message and status code from an error before returning a response from the API:
```go
switch err.(type) {
case errcode.ErrorCode:
daError, _ := err.(errcode.ErrorCode)
statusCode = daError.Descriptor().HTTPStatusCode
errMsg = daError.Message()
case errcode.Error:
// For reference, if you're looking for a particular error
// then you can do something like :
// import ( derr "github.com/docker/docker/errors" )
// if daError.ErrorCode() == derr.ErrorCodeNoSuchContainer { ... }
daError, _ := err.(errcode.Error)
statusCode = daError.ErrorCode().Descriptor().HTTPStatusCode
errMsg = daError.Message
default:
// This part of will be removed once we've
// converted everything over to use the errcode package
// FIXME: this is brittle and should not be necessary.
// If we need to differentiate between different possible error types,
// we should create appropriate error types with clearly defined meaning
errStr := strings.ToLower(err.Error())
for keyword, status := range map[string]int{
"not found": http.StatusNotFound,
"no such": http.StatusNotFound,
"bad parameter": http.StatusBadRequest,
"conflict": http.StatusConflict,
"impossible": http.StatusNotAcceptable,
"wrong login/password": http.StatusUnauthorized,
"hasn't been activated": http.StatusForbidden,
} {
if strings.Contains(errStr, keyword) {
statusCode = status
break
}
}
}
```
You can notice two things in that code:
1. We have to explain how errors work, because our implementation goes against how easy to use Go errors are.
2. At no moment we arrived to remove that `switch` statement that was the original reason to use our custom implementation.
This change removes all our status errors from the errors package and puts them back in their specific contexts.
IT puts the messages back with their contexts. That way, we know right away when errors used and how to generate their messages.
It uses custom interfaces to reason about errors. Errors that need to response with a custom status code MUST implementent this simple interface:
```go
type errorWithStatus interface {
HTTPErrorStatusCode() int
}
```
This interface is very straightforward to implement. It also preserves Go errors real behavior, getting the message is as simple as using the `Error()` method.
I included helper functions to generate errors that use custom status code in `errors/errors.go`.
By doing this, we remove the hard dependency we have eeverywhere to our custom errors package. Yes, you can use it as a helper to generate error, but it's still very easy to generate errors without it.
Please, read this fantastic blog post about errors in Go: http://dave.cheney.net/2014/12/24/inspecting-errors
Signed-off-by: David Calavera <david.calavera@gmail.com>
There are five options 'debug' 'labels' 'cluster-store' 'cluster-store-opts'
and 'cluster-advertise' that can be reconfigured, configure any of these
options should not affect other options which may have configured in flags.
But this is not true, for example, I start a daemon with -D to enable the
debugging, and after a while, I want reconfigure the 'label', so I add a file
'/etc/docker/daemon.json' with content '"labels":["test"]' and send SIGHUP to daemon
to reconfigure the daemon, it work, but the debugging of the daemon is also diabled.
I don't think this is a expeted behaviour.
This patch also have some minor refactor of reconfiguration of cluster-advertiser.
Enable user to reconfigure cluster-advertiser without cluster-store in config file
since cluster-store could also be already set in flag, and we only want to reconfigure
the cluster-advertiser.
Signed-off-by: Lei Jitang <leijitang@huawei.com>
- It reverts fa163f5619 plus a small change
in order to allow passing the global scope datastore
to libnetwork after damon boot.
Signed-off-by: Alessandro Boch <aboch@docker.com>
Also changes missing storage layer for container
RWLayer to a soft failure.
Fixes#20147
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
(cherry picked from commit 2798d7a6a681aee8995e87c9b68128e54876d2b5)
Currently, daemonbuilder package (part of daemon) implemented the
builder backend. However, it was a very thin wrapper around daemon
methods and caused an implementation dependency for api/server build
endpoint. api/server buildrouter should only know about the backend
implementing the /build API endpoint.
Removing daemonbuilder involved moving build specific methods to
respective files in the daemon, where they fit naturally.
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
SetMaxThreads from runtime/debug in Golang is called to set max threads
value to 90% of /proc/sys/kernel/threads-max
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
Yong Tang
Sebastiaan van Stijn
Shijiang Wei
Kenfe-Mickael Laventure
Vincent Demeester
Kai Qiang Wu(Kennan)
Sebastiaan van Stijn
Brian Goff
David Calavera
Alexander Morozov
Zhang Wei
allencloud
Tonis Tiigi
Anusha Ragunathan
Tibor Vass
Evan Hazlett
Qiang Huang
Aaron Lehmann
Arnaud Porterie
Mike Goelzer
msabansal
Derek McGowan
Lei Jitang
Alessandro Boch
Antonio Murdaca