Prior to this change, the "docker network inspect" contains only the
endpoints that have active local container. This excludes all the remote
and stale endpoints. By including all the endpoints, it makes debugging
much simpler and also allows the user to cleanup any stale endpoints
using "docker network disconnect -f {network} {endpoint-name}".
Signed-off-by: Madhu Venugopal <madhu@docker.com>
This code was lost in a rebase in the PIDs cgroup merge, fix it so that
`docker stats` actually shows statistics from the PIDs cgroup.
Signed-off-by: Aleksa Sarai <asarai@suse.com>
This change centralizes the template manipulation in a single package
and adds basic string functions to their execution.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Update unit test and documentation to handle the new case where Username
is set to <token> to indicate an identity token is involved.
Change the "Password" field in communications with the credential helper
to "Secret" to make clear it has a more generic purpose.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This mechanism exchanges basic auth credentials for an identity token.
The identity token is used going forward to request scoped-down tokens
to use for registry operations.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Use token handler options for initialization.
Update auth endpoint to set identity token in response.
Update credential store to match distribution interface changes.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
`docker stats --no-stream` always print zero values.
```
$ docker stats --no-stream
CONTAINER CPU % MEM USAGE / LIMIT MEM %
NET I/O BLOCK I/O
7f4ef234ca8c 0.00% 0 B / 0 B 0.00%
0 B / 0 B 0 B / 0 B
f05bd18819aa 0.00% 0 B / 0 B 0.00%
0 B / 0 B 0 B / 0 B
```
This commit will let docker client wait until it gets correct stat
data before print it on screen.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
This change adds "KernelMemory" to the /info endpoint and
shows a warning if KernelMemory is not supported by the kernel.
This makes it more consistent with the other memory-limit
options.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Make sure credentials are removed from the store at logout (not only
in the config file). Remove not needed error check and auth erasing
at login (auths aren't stored anywhere at that point).
Add regression test.
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
docker build is broken because it sends to the daemon the full
cliconfig file which has only Email(s). This patch retrieves all auth
configs from the credentials store.
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
This removes the email prompt when you use docker login, and also removes the ability to register via the docker cli. Docker login, will strictly be used for logging into a registry server.
Signed-off-by: Ken Cochrane <kencochrane@gmail.com>
In situations where a client is called like `docker stats` with no
arguments or flags, if a container which was already created but not
started yet is then subsequently started it will not be added to the
stats list as expected.
Also splits some of the stats helpers to a separate file from the stats
CLI which is already quite long.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This change implements communication with an external credentials store,
ala git-credential-helper. The client falls back the plain text store,
what we're currently using, if there is no remote store configured.
It shells out to helper program when a credential store is
configured. Those programs can be implemented with any language as long as they
follow the convention to pass arguments and information.
There is an implementation for the OS X keychain in https://github.com/calavera/docker-credential-helpers.
That package also provides basic structure to create other helpers.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Subscribe to events and monitor for new containers before the initial
listing of currently running containers.
This fixes a race where a new container could appear between the first
list call but before the client was subscribed to events, leading to a
container never appearing in the output of `docker stats`.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
Unlike the untrusted push without an explicit tag will push all
tags for that repo, the trusted push would expect an explicit tag.
So that the code that attempts to do smart logic around signing multiple
tags should be removed.
Signed-off-by: Hu Keping <hukeping@huawei.com>
Moving all strings to the errors package wasn't a good idea after all.
Our custom implementation of Go errors predates everything that's nice
and good about working with errors in Go. Take as an example what we
have to do to get an error message:
```go
func GetErrorMessage(err error) string {
switch err.(type) {
case errcode.Error:
e, _ := err.(errcode.Error)
return e.Message
case errcode.ErrorCode:
ec, _ := err.(errcode.ErrorCode)
return ec.Message()
default:
return err.Error()
}
}
```
This goes against every good practice for Go development. The language already provides a simple, intuitive and standard way to get error messages, that is calling the `Error()` method from an error. Reinventing the error interface is a mistake.
Our custom implementation also makes very hard to reason about errors, another nice thing about Go. I found several (>10) error declarations that we don't use anywhere. This is a clear sign about how little we know about the errors we return. I also found several error usages where the number of arguments was different than the parameters declared in the error, another clear example of how difficult is to reason about errors.
Moreover, our custom implementation didn't really make easier for people to return custom HTTP status code depending on the errors. Again, it's hard to reason about when to set custom codes and how. Take an example what we have to do to extract the message and status code from an error before returning a response from the API:
```go
switch err.(type) {
case errcode.ErrorCode:
daError, _ := err.(errcode.ErrorCode)
statusCode = daError.Descriptor().HTTPStatusCode
errMsg = daError.Message()
case errcode.Error:
// For reference, if you're looking for a particular error
// then you can do something like :
// import ( derr "github.com/docker/docker/errors" )
// if daError.ErrorCode() == derr.ErrorCodeNoSuchContainer { ... }
daError, _ := err.(errcode.Error)
statusCode = daError.ErrorCode().Descriptor().HTTPStatusCode
errMsg = daError.Message
default:
// This part of will be removed once we've
// converted everything over to use the errcode package
// FIXME: this is brittle and should not be necessary.
// If we need to differentiate between different possible error types,
// we should create appropriate error types with clearly defined meaning
errStr := strings.ToLower(err.Error())
for keyword, status := range map[string]int{
"not found": http.StatusNotFound,
"no such": http.StatusNotFound,
"bad parameter": http.StatusBadRequest,
"conflict": http.StatusConflict,
"impossible": http.StatusNotAcceptable,
"wrong login/password": http.StatusUnauthorized,
"hasn't been activated": http.StatusForbidden,
} {
if strings.Contains(errStr, keyword) {
statusCode = status
break
}
}
}
```
You can notice two things in that code:
1. We have to explain how errors work, because our implementation goes against how easy to use Go errors are.
2. At no moment we arrived to remove that `switch` statement that was the original reason to use our custom implementation.
This change removes all our status errors from the errors package and puts them back in their specific contexts.
IT puts the messages back with their contexts. That way, we know right away when errors used and how to generate their messages.
It uses custom interfaces to reason about errors. Errors that need to response with a custom status code MUST implementent this simple interface:
```go
type errorWithStatus interface {
HTTPErrorStatusCode() int
}
```
This interface is very straightforward to implement. It also preserves Go errors real behavior, getting the message is as simple as using the `Error()` method.
I included helper functions to generate errors that use custom status code in `errors/errors.go`.
By doing this, we remove the hard dependency we have eeverywhere to our custom errors package. Yes, you can use it as a helper to generate error, but it's still very easy to generate errors without it.
Please, read this fantastic blog post about errors in Go: http://dave.cheney.net/2014/12/24/inspecting-errors
Signed-off-by: David Calavera <david.calavera@gmail.com>
- Allow to filter containers by volume with `--filter volume=name` and `filter volume=/dest`.
- Show their names in the list with the custom format `{{ .Mounts }}`.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Add `--restart` flag for `update` command, so we can change restart
policy for a container no matter it's running or stopped.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Fixes: #20328
We sort network ls output with incresing order,
it may make output more easy to consume for users.
Signed-off-by: Kai Qiang Wu(Kennan) <wkqwu@cn.ibm.com>
Ideally I would love to just remove this check entirely because its
seems pretty useless. An old client talking to a new server isn't
an error condition, nor is it something to even worry about - its a normal
part of life. Flooding my screen (and logs) with a warning that isn't
something I (as an admin) need to be concerned about is silly and a
distraction when I need to look for real issues. If anything this should
be printed on the cli not the daemon since its the cli that needs to be
concerned, not the daemon.
However, since when you debug an issue it might be interesting to know the
client is old I decided to pull back a little and just change it from
a Warning to a Debug logrus call instead.
If others want it removed I still do that though :-)
Signed-off-by: Doug Davis <dug@us.ibm.com>
In Docker 1.10 and earlier, "docker build" can do a build FROM a private
repository that hasn't yet been pulled. This doesn't work on master. I
bisected this to https://github.com/docker/docker/pull/19414.
AuthConfigs is deserialized from the HTTP request, but not included in
the builder options.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This feels like it's where it belongs and it makes it exported
again (which is needed for libcompose that was using it before 1.10).
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
This is done by moving the following types to api/types/config.go:
- ContainersConfig
- ContainerAttachWithLogsConfig
- ContainerWsAttachWithLogsConfig
- ContainerLogsConfig
- ContainerStatsConfig
Remove dependency on "version" package from types.ContainerStatsConfig.
Decouple the "container" router from the "daemon/exec" implementation.
* This is done by making daemon.ContainerExecInspect() return an interface{}
value. The same trick is already used by daemon.ContainerInspect().
Improve documentation for router packages.
Extract localRoute and router into separate files.
Move local.router to image.imageRouter.
Changes:
- Move local/image.go to image/image_routes.go.
- Move local/local.go to image/image.go
- Rename router to imageRouter.
- Simplify imports for image/image.go (remove alias for router package).
Merge router/local package into router package.
Decouple the "image" router from the actual daemon implementation.
Add Daemon.GetNetworkByID and Daemon.GetNetworkByName.
Decouple the "network" router from the actual daemon implementation.
This is done by replacing the daemon.NetworkByName constant with
an explicit GetNetworkByName method.
Remove the unused Daemon.GetNetwork method and the associated constants NetworkByID and NetworkByName.
Signed-off-by: Lukas Waslowski <cr7pt0gr4ph7@gmail.com>
Signed-off-by: David Calavera <david.calavera@gmail.com>
Avoid using the `/info` endpoint in the `login` and `logout` workflows
when the Registry endpoint is overriden by the user through the command
line.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
This is similar to the version in the registry package, but uses the
daemon's default index (as opposed to the default for the client's
platform) if using the "official index".
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Currently some commands including `kill`, `pause`, `restart`, `rm`,
`rmi`, `stop`, `unpause`, `udpate`, `wait` will print a lot of error
message on client side, with a lot of redundant messages, this commit is
trying to remove the unuseful and redundant information for user.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
This adds an npipe protocol option for Windows hosts, akin to unix
sockets for Linux hosts. This should become the default transport
for Windows, but this change does not yet do that.
It also does not add support for the client side yet since that
code is in engine-api, which will have to be revendored separately.
Signed-off-by: John Starks <jostarks@microsoft.com>
Kenfe-Mickael Laventure
Jessica Frazelle
Alexander Morozov
David Calavera
Vincent Demeester
Antonio Murdaca
Madhu Venugopal
Brian Goff
Aleksa Sarai
Tonis Tiigi
Aaron Lehmann
Derek McGowan
allencloud
Zhang Wei
Antonio Murdaca
Arnaud Porterie
Sebastiaan van Stijn
Riyaz Faizullabhoy
Sebastiaan van Stijn
Qiang Huang
Alexander Morozov
Ken Cochrane
HuKeping
Brent Salisbury
Morgan Bauer
Kai Qiang Wu(Kennan)
Vishnu kannan
Jess Frazelle
Doug Davis
Aidan Hobson Sayers
Victor Vieux
John Howard
Lukas Waslowski
Lei Jitang
Chun Chen
Tibor Vass
John Starks