This is add support for #19559
We tried sort it in client side, and it sort follow go
sort : sorts a slice of strings in increasing order.
Signed-off-by: Kai Qiang Wu(Kennan) <wkqwu@cn.ibm.com>
This PR moves the testRequires check from within setupRegistry
and setupNotary to when the Suite itself starts up.
This fixes a bug where testRequires() in setupRegistry() would
succeed and start registry, but testRequires() in setupNotary()
would fail. This immediately exits the goroutine with registry
still running.
Signed-off-by: Christopher Jones <tophj@linux.vnet.ibm.com>
1. Replace raw `docker inspect -f xxx` with `inspectField`, to make code
cleaner and more consistent
2. assert the error in function `inspectField*` so we don't need to
assert the return value of it every time, this will make inspect easier.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Add `runSleepingContainer` and `runSleepingContainerInImage` helper
functions to factor out the way to run system-specific idle containers.
Define a sleeping container as command `top` in image `busybox` for
Unix and as command `sleep 60` in image `busybox` for Windows. Provide a
single point of code to update those.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
User call `Start` could with args, and the args could
contains `--storage-driver`, but in `Start`, it will add
`--storage-driver` even though user has specified `--storage-driver`
in args.
Signed-off-by: Lei Jitang <leijitang@huawei.com>
dockerinit has been around for a very long time. It was originally used
as a way for us to do configuration for LXC containers once the
container had started. LXC is no longer supported, and /.dockerinit has
been dead code for quite a while. This removes all code and references
in code to dockerinit.
Signed-off-by: Aleksa Sarai <asarai@suse.com>
https://github.com/docker/libnetwork/pull/810 provides the more complete
solution for moving the Port-mapping ownership away from endpoint and
into Sandbox. But, this PR makes the best use of existing libnetwork
design and get a step closer to the gaol.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
This makes it so when calling `docker run --rm`, or `docker rm -v`, only
volumes specified without a name, e.g. `docker run -v /foo` instead of
`docker run -v awesome:/foo` are removed.
Note that all volumes are named, some are named by the user, some get a
generated name. This is specifically about how the volume was specified
on `run`, assuming that if the user specified it with a name they expect
it to persist after the container is cleaned up.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Replace `Tty` with `TTY` in all test case names so that we can run
a bundle of `TTY` related test cases with TESTFLAGS like
`-check.f TestExecTTY*`
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Use a back-compat struct to handle listing volumes for volumes we know
about (because, presumably, they are being used by a container) for
volume drivers which don't yet support `List`.
Adds a fall-back for the volume driver `Get` call, which will use
`Create` when the driver returns a `404` for `Get`. The old behavior was
to always use `Create` to get a volume reference.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
TestBuildEnvUsage2 was flagged in https://github.com/docker/docker/issues/19425
as one of the slowest integration tests. It's slow because it has some
comprehensive builder test cases that end up creating a lot of layers.
Even with a busybox base image, this can be expensive. It's not possible
to build "FROM scratch" because the test cases need the shell to ensure
environment variables are set correctly.
Some of the ENV and RUN statements can be combined. This causes fewer
layers to get created. Doing this produces a marginal improvement in the
runtime.
Before:
PASS: docker_cli_build_test.go:3956: DockerSuite.TestBuildEnvUsage2 43.619s
After:
PASS: docker_cli_build_test.go:3956: DockerSuite.TestBuildEnvUsage2 31.286s
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Divide event matching into two functions, a matcher and
a processor. That way, the error handling doesn't call
the channel closing logic at all.
Signed-off-by: David Calavera <david.calavera@gmail.com>
To ensure we don't regress on bad --cgroup-parent paths, add some
integration tests that check that the host hasn't toppled (or suddently
started to create files in the host).
Signed-off-by: Aleksa Sarai <asarai@suse.com>
This hopefully makes DockerTrustSuite.SetUpTest
less flaky.
Increased the number of attempts to check
if Notary is available before giving up.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Correctly passes the DOCKER_ENGINE_GOARCH env var
to the testing environment
Also fixes logic for skipping a test if on ARM.
Signed-off-by: Christopher Jones <tophj@linux.vnet.ibm.com>
Default is predefined network and is reserved, so we should stop user
from creating network with name `default`
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Revert the portions of #17617 that report all errors when a pull
falls back, and go back to just reporting the last error. This was nice
to have, but causes some UX issues because nonexistent images show
additional "unauthorized" errors.
Keep the part of the PR that handled ENOSPC, as this appears to work
even without tracking multiple errors.
Fixes#19419
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Fixes: #18890
This fix add same filter validation logic as images. We should
add such check to make sure filters work make sense to end-users
Right now, we keep old use 1 as filter, but in long term, it should
be have same interface checking as images, it could be improved in
other patches.
Signed-off-by: Kai Qiang Wu(Kennan) <wkqwu@cn.ibm.com>
Issue was caused when exec is tarted, exits, then stated again.
In this case, `Close` is called twice, which closes a channel twice.
Changes execConfig.ExitCode to a pointer so we can test if the it has
been set or not.
This allows us to return early when the exec has already been run.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
* If user doesn't specify the subnets to create a network, it will pick
subnets from inside preferred pool. This PR aims to inspect these subnets info
* Add integration tests for docker inspect the subnets.
* docker-py project is already synchronized.
* jenkins checks depend on https://github.com/docker/docker-py/pull/888
Fixes issue #18626
Signed-off-by: Wen Cheng Ma <wenchma@cn.ibm.com>
Read configuration after flags making this the priority:
1- Apply configuration from file.
2- Apply configuration from flags.
Reload configuration when a signal is received, USR2 in Linux:
- Reload router if the debug configuration changes.
- Reload daemon labels.
- Reload cluster discovery.
Signed-off-by: David Calavera <david.calavera@gmail.com>
This is related image fix for Propose #19153
for volume related change, would use another patch
to fix that.
Signed-off-by: Kai Qiang Wu(Kennan) <wkqwu@cn.ibm.com>
docker's network disconnect api now supports `Force` option which can be
used to force cleanup an endpoint from any host in the cluster.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Currently the TestInspectApiContainerVolumeDriver is testing the
existence of a volume driver without specifing any volume driver.
This commit fixes that.
Signed-off-by: André Martins <aanm90@gmail.com>
Tracks source repository information for each blob in the blobsum
service, which is then used to attempt to mount blobs from another
repository when pushing instead of having to re-push blobs to the same
registry.
Signed-off-by: Brian Bland <brian.bland@docker.com>
This brings in the container-local alias functionality for containers
connected to u ser-defined networks.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
When pulling an image with content trust enabled, two references are
created: a digest reference and a tag reference. Deleting by tag
wouldn't actually remove the image, because the digest reference keeps
it alive.
This change modifies the rmi logic so that digest references don't keep
an image alive. If the last tag referencing a given image is deleted,
any digest references to it will be removed as well, so the image can
actually get deleted. This fixes the usability problem with deletions
when content trust is in use, so something like "docker pull busybox;
docker rmi busybox" will work as expected.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Instead of just showing the number of containers this patch will
show the number of running, paused and stopped containers as well.
Signed-off-by: Kim Eik <kim@heldig.org>
(cherry picked from commit a9804ab1cb117a132cbf460067d55f5146d50956)
The test injects a synthetic manifest list into the registry blob store,
since there isn't a tool for pushing them yet.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Add DockerSchema1RegistrySuite which uses this registry, and make
applicable integration tests run as part of this suite.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Wait the new created container for running and then check if it
is in the docker stats to avoid flaky test.
Signed-off-by: Lei Jitang <leijitang@huawei.com>
if create a container with -w to specify the working directory and
the directory does not exist in the container rootfs, the directory
will be created until the container start. It make docker export of
a created container and a running container inconsistent.
Signed-off-by: Lei Jitang <leijitang@huawei.com>
Don't rely on sqlite db for name registration and linking.
Instead register names and links when the daemon starts to an in-memory
store.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Makes `docker volume ls` and `docker volume inspect` ask the volume
drivers rather than only using what is cached locally.
Previously in order to use a volume from an external driver, one would
either have to use `docker volume create` or have a container that is
already using that volume for it to be visible to the other volume
API's.
For keeping uniqueness of volume names in the daemon, names are bound to
a driver on a first come first serve basis. If two drivers have a volume
with the same name, the first one is chosen, and a warning is logged
about the second one.
Adds 2 new methods to the plugin API, `List` and `Get`.
If a plugin does not implement these endpoints, a user will not be able
to find the specified volumes as well requests go through the drivers.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
dockerfile.Config is almost redundant with ImageBuildOptions.
Unify the two so that the latter can be removed. This also
helps build's API endpoint code to be less dependent on package
dockerfile.
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
Implement configurable detach keys (for `attach`, exec`, `run` and
`start`) using the client-side configuration
- Adds a `--detach-keys` flag to `attach`, `exec`, `run` and `start`
commands.
- Adds a new configuration field (in `~/.docker/config.json`) to
configure the default escape keys for docker client.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
- Stop serializing JSONMessage in favor of events.Message.
- Keep backwards compatibility with JSONMessage for container events.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Only two of these are not handled, the one in `TestBuildForceRm`
is intended to not be handled, while the other one in
`TestBuildResourceConstraintsAreUsed` causes problem.
In test case `TestBuildResourceConstraintsAreUsed`, somehow we
are not able to access network to get base image, but the error
message is:
```
Error: failed to inspect container : Unable to read inspect data: json: cannot unmarshal array into Go value of type types.ContainerJSON
```
Totally confusion.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
When a container create with -m 100m and then docker update other
cgroup settings such as --cpu-quota, the memory limit show by
docker stats will become the default value but not the 100m.
Signed-off-by: Lei Jitang <leijitang@huawei.com>
- Use the ones provided by docker/go-connections, they are a drop in replacement.
- Remove pkg/sockets from docker.
- Keep pkg/tlsconfig because libnetwork still needs it and there is a
circular dependency issue.
Signed-off-by: David Calavera <david.calavera@gmail.com>
For operations on multi containers, we printed error for each
failed container, then printed an extra message for container
names, it seems redundant.
Addresses comments:
https://github.com/docker/docker/pull/15078#discussion_r47988449
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
This provides a best effort on daemon restarts to restart containers
which have linked containers that are not up yet instead of failing.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
It's used for updating properties of one or more containers, we only
support resource configs for now. It can be extended in the future.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
This is a followup to #18839. That PR relaxed the fallback logic so that
if a manifest doesn't exist on v2, or the user is unauthorized to access
it, we try again with the v1 protocol. A similar special case is needed
for "pull all tags" (docker pull -a). If the v2 registry doesn't
recognize the repository, or doesn't allow the user to access it, we
should fall back to v1 and try to pull all tags from the v1 registry.
Conversely, if the v2 registry does allow us to list the tags, there
should be no fallback, even if there are errors pulling those tags.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This patches avoids registering (and calling) the same plugin more than
once. Using an helper map which indexes by name guarantees this and keeps
the order.
The behavior of overriding the same name in a flag is consistent with,
for instance, the `docker run -v /test -v /test` flag which register
the volume just once.
Adds integration tests.
Without this patch:
```
Dec 20 19:34:52 localhost.localdomain docker[9988]:
time="2015-12-20T19:34:52.080901676+01:00" level=debug msg="Calling
GET
/v1.22/info"
Dec 20 19:34:52 localhost.localdomain docker[9988]:
time="2015-12-20T19:34:52.081213202+01:00" level=debug msg="AuthZ
request using plugin docker-novolume-plugin"
Dec 20 19:34:52 localhost.localdomain docker[9988]:
time="2015-12-20T19:34:52.081268132+01:00" level=debug
msg="docker-novolume-plugin implements: authz"
Dec 20 19:34:52 localhost.localdomain docker[9988]:
time="2015-12-20T19:34:52.081699788+01:00" level=debug msg="AuthZ
request using plugin docker-novolume-plugin"
Dec 20 19:34:52 localhost.localdomain docker[9988]:
time="2015-12-20T19:34:52.081762507+01:00" level=debug
msg="docker-novolume-plugin implements: authz"
Dec 20 19:34:52 localhost.localdomain docker[9988]:
time="2015-12-20T19:34:52.082092480+01:00" level=debug msg="GET
/v1.22/info"
Dec 20 19:34:52 localhost.localdomain docker[9988]:
time="2015-12-20T19:34:52.628691038+01:00" level=debug msg="AuthZ
response using plugin docker-novolume-plugin"
Dec 20 19:34:52 localhost.localdomain docker[9988]:
time="2015-12-20T19:34:52.629880930+01:00" level=debug msg="AuthZ
response using plugin docker-novolume-plugin"
```
With this patch:
```
Dec 20 19:37:32 localhost.localdomain docker[16620]:
time="2015-12-20T19:37:32.376523958+01:00" level=debug msg="Calling
GET
/v1.22/info"
Dec 20 19:37:32 localhost.localdomain docker[16620]:
time="2015-12-20T19:37:32.376715483+01:00" level=debug msg="AuthZ
request using plugin docker-novolume-plugin"
Dec 20 19:37:32 localhost.localdomain docker[16620]:
time="2015-12-20T19:37:32.376771230+01:00" level=debug
msg="docker-novolume-plugin implements: authz"
Dec 20 19:37:32 localhost.localdomain docker[16620]:
time="2015-12-20T19:37:32.377698897+01:00" level=debug msg="GET
/v1.22/info"
Dec 20 19:37:32 localhost.localdomain docker[16620]:
time="2015-12-20T19:37:32.951016441+01:00" level=debug msg="AuthZ
response using plugin docker-novolume-plugin"
```
Also removes a somehow duplicate debug statement (leaving only the
second one as it's a loop of plugin's manifest):
```
Dec 20 19:52:30 localhost.localdomain docker[25767]:
time="2015-12-20T19:52:30.544090518+01:00" level=debug
msg="docker-novolume-plugin's manifest: &{[authz]}"
Dec 20 19:52:30 localhost.localdomain docker[25767]:
time="2015-12-20T19:52:30.544170677+01:00" level=debug
msg="docker-novolume-plugin implements: authz"
```
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
Add filter support for `network ls` to hide predefined network,
then user can use "docker network rm `docker network ls -f type=custom`"
to delete a bundle of userdefined networks.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
We keep only one logic to test event related behavior that will help us
diagnose flacky event errors.
Signed-off-by: David Calavera <david.calavera@gmail.com>
If you run a
docker run command with --tmpfs /mountpoint:noexec
Or certain options that get translated into mount options, the mount command can get passed "" for mount data.
So this should be valid.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
- Make the API client library completely standalone.
- Move windows partition isolation detection to the client, so the
driver doesn't use external types.
Signed-off-by: David Calavera <david.calavera@gmail.com>
PR #18590 caused compatibility issues with registries such as gcr.io
which support both the v1 and v2 protocols, but do not provide the same
set of images over both protocols. After #18590, pulls from these
registries would never use the v1 protocol, because of the
Docker-Distribution-Api-Version header indicating that v2 was supported.
Fix the problem by making an exception for the case where a manifest is
not found. This should allow fallback to v1 in case that image is
exposed over the v1 protocol but not the v2 protocol.
This avoids the overly aggressive fallback behavior before #18590 which
would allow protocol fallback after almost any error, but restores
interoperability with mixed v1/v2 registry setups.
Fixes#18832
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Right now, the quiet (-q, --quiet) flag ignores the output
generated from within the container.
However, it ought to be quiet in a way that all kind
of diagnostic output should be ignored, unless the build
process fails.
This patch makes the quiet flag behave in the following way:
1. If the build process succeeds, stdout contains the image ID
and stderr is empty.
2. If the build process fails, stdout is empty and stderr
has the error message and the diagnostic output of that process.
If the quiet flag is not set, then everything goes to stdout
and error messages, if there are any, go to stderr.
Signed-off-by: Boaz Shuster <ripcurld.github@gmail.com>
- fix naming and formatting
- provide more context when erroring auth
- do not capitalize errors
- fix wrong documentation
- remove ugly remoteError{}
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
If we detect a Docker-Distribution-Api-Version header indicating that
the registry speaks the V2 protocol, no fallback to V1 should take
place.
The same applies if a V2 registry operation succeeds while attempting a
push or pull.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
/dev/sda wasn't an invalid device and this test failed, so, hopefully
/dev/sdX isn't going to exist in other envs.
Signed-off-by: Christy Perez <christy@linux.vnet.ibm.com>
These filters are only use to interchange data between clients and daemons.
They don't belong to the parsers package.
Signed-off-by: David Calavera <david.calavera@gmail.com>
- Move time json marshaling to the jsonlog package: this is a docker
internal hack that we should not promote as a library.
- Move Timestamp encoding/decoding functions to the API types: This is
only used there. It could be a standalone library but I don't this
it's worth having a separated repo for this. It could introduce more
complexity than it solves.
Signed-off-by: David Calavera <david.calavera@gmail.com>
This restores the behavior that existed prior to #16235 for setting
OOMKilled, while retaining the additional benefits it introduced around
emitting the oom event.
This also adds a test for the most obvious OOM cases which would have
caught this regression.
Fixes#18510
Signed-off-by: Euan <euank@amazon.com>
After addition of multi-host networking in Docker 1.9, Docker Remote
API is still returning only the network specified during creation
of the container in the “List Containers” (`/containers/json`) endpoint:
...
"HostConfig": {
"NetworkMode": "default"
},
The list of networks containers are attached to is only available at
Get Container (`/containers/<id>/json`) endpoint.
This does not allow applications utilizing multi-host networking to
be built on top of Docker Remote API.
Therefore I added a simple `"NetworkSettings"` section to the
`/containers/json` endpoint. This is not identical to the NetworkSettings
returned in Get Container (`/containers/<id>/json`) endpoint. It only
contains a single field `"Networks"`, which is essentially the same
value shown in inspect output of a container.
This change adds the following section to the `/containers/json`:
"NetworkSettings": {
"Networks": {
"bridge": {
"EndpointID": "2cdc4edb1ded3631c81f57966563e...",
"Gateway": "172.17.0.1",
"IPAddress": "172.17.0.2",
"IPPrefixLen": 16,
"IPv6Gateway": "",
"GlobalIPv6Address": "",
"GlobalIPv6PrefixLen": 0,
"MacAddress": "02:42:ac:11:00:02"
}
}
}
This is of type `SummaryNetworkSettings` type, a minimal version of
`api/types#NetworkSettings`.
Actually all I need is the network name and the IPAddress fields. If folks
find this addition too big, I can create a `SummaryEndpointSettings` field
as well, containing just the IPAddress field.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
To make docker inspect return a consistent result of networksettings
for created container and stopped container, it's bettew to update
the network settings on container creating.
Signed-off-by: Lei Jitang <leijitang@huawei.com>
This commit adds a transfer manager which deduplicates and schedules
transfers, and also an upload manager and download manager that build on
top of the transfer manager to provide high-level interfaces for uploads
and downloads. The push and pull code is modified to use these building
blocks.
Some benefits of the changes:
- Simplification of push/pull code
- Pushes can upload layers concurrently
- Failed downloads and uploads are retried after backoff delays
- Cancellation is supported, but individual transfers will only be
cancelled if all pushes or pulls using them are cancelled.
- The distribution code is decoupled from Docker Engine packages and API
conventions (i.e. streamformatter), which will make it easier to split
out.
This commit also includes unit tests for the new distribution/xfer
package. The tests cover 87.8% of the statements in the package.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
It makes the behavior completely consistent across commands.
It adds tests to check that execution stops when an element is not
found.
Signed-off-by: David Calavera <david.calavera@gmail.com>
This test was directly comparing lines of output from "docker images".
Sometimes, when busybox had been pushed to the hub recently, the
relative creation times would differ like this:
... obtained []string = []string{"busybox", "latest", "d9551b4026f0", "27", "minutes", "ago", "1.113", "MB"}
... expected []string = []string{"busybox", "latest", "d9551b4026f0", "26", "minutes", "ago", "1.113", "MB"}
Fixing by removing the time-since-creation fields from the comparison.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Each plug-in operates as a separate service, and registers with Docker
through general (plug-ins API)
[https://blog.docker.com/2015/06/extending-docker-with-plugins/]. No
Docker daemon recompilation is required in order to add / remove an
authentication plug-in. Each plug-in is notified twice for each
operation: 1) before the operation is performed and, 2) before the
response is returned to the client. The plug-ins can modify the response
that is returned to the client.
The authorization depends on the authorization effort that takes place
in parallel [https://github.com/docker/docker/issues/13697].
This is the official issue of the authorization effort:
https://github.com/docker/docker/issues/14674
(Here)[https://github.com/rhatdan/docker-rbac] you can find an open
document that discusses a default RBAC plug-in for Docker.
Signed-off-by: Liron Levin <liron@twistlock.com>
Added container create flow test and extended the verification for ps
Since seccomp is still a configurable build-tag, add a requirements
entry for seccomp, as well as move seccomp tests to "_unix" given it
won't be applicable to other platforms at this time.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
This test can fail if it is run close to a second boundary:
FAIL: docker_cli_logs_test.go:169: DockerSuite.TestLogsSince
docker_cli_logs_test.go:183:
c.Assert(out, checker.Not(checker.Contains), v,
check.Commentf("unexpected log message returned, since=%v", since))
... obtained string = "" +
... "2015-12-07T19:54:45.000551883Z 1449518084 log2\n" +
... "2015-12-07T19:54:47.001310929Z 1449518086 log3\n"
... substring string = "log2"
... unexpected log message returned, since=1449518085
The problem is that it generates log lines using date +%s and uses that
timestamp as a reference for log filtering with (--since) later on in
the test. However, the timestamp that date +%s generates may not match
the log timestamp.
This commit changes the test to parse the log timestamp itself instead
of relying on a parallel timestamp.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Removed images were not cleaned up from the
digest-set that is used for the search index.
Fixes#18437
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
This solves a bug where /etc may have pre-existing permissions from
build time, but init layer setup (reworked for user namespaces) was
assuming root ownership. Adds a test as well to catch this situation in
the future.
Minor fix to wrong ordering of chown/close on files created during the
same initlayer setup.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Following `docker inspect` conventions:
- Keep partial info in a buffer to not print incomplete template outputs.
- Break execution when template parsing or decoding fail.
Signed-off-by: David Calavera <david.calavera@gmail.com>
A TopicFunc is an interface to let the pubisher decide whether it needs
to send a message to a subscriber or not. It returns true if the
publisher must send the message and false otherwise.
Users of the pubsub package can create a subscriber with a topic
function by calling `pubsub.SubscribeTopic`.
Message delivery has also been modified to use concurrent channels per
subscriber. That way, topic verification and message delivery is not
o(N+M) anymore, based on the number of subscribers and topic verification
complexity.
Using pubsub topics, the API stops controlling the message delivery,
delegating that function to a topic generated with the filtering
provided by the user. The publisher sends every message to the
subscriber if there is no filter, but the api doesn't have to select
messages to return anymore.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Improves the current filtering implementation complixity.
Currently, the best case is O(N) and worst case O(N^2) for key-value filtering.
In the new implementation, the best case is O(1) and worst case O(N), again for key-value filtering.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Makes it easier to debug in the future given three different docker run
executions were all outputting the same error string.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
It will Tar up contents of child directory onto tmpfs if mounted over
This patch will use the new PreMount and PostMount hooks to "tar"
up the contents of the base image on top of tmpfs mount points.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Closes#9798
@maintainers please note that this is a change to the UX. We no longer
require the -f flag on `docker tag` to move a tag from an existing image.
However, this does make us more consistent across our commands,
see https://github.com/docker/docker/issues/9798 for the history.
Signed-off-by: Doug Davis <dug@us.ibm.com>
libcontainer v0.0.4 introduces setting `/proc/self/oom_score_adj` to
better tune oom killing preferences for container process. This patch
simply integrates OomScoreAdj libcontainer's config option and adjust
the cli with this new option.
Signed-off-by: Antonio Murdaca <amurdaca@redhat.com>
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
Cgroup integtaion tests should cover:
- docker can run sucessfully with these options
- these cgroup options are set to HostConfig as expected
- these cgroup options are really set to cgroup files as expected
- other cases (wrong value, combinations etc..)
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Moved a defer up to a better spot.
Fixed TestUntarPathWithInvalidDest to actually fail for the right reason
Closes#18170
Signed-off-by: Doug Davis <dug@us.ibm.com>
Add distribution package for managing pulls and pushes. This is based on
the old code in the graph package, with major changes to work with the
new image/layer model.
Add v1 migration code.
Update registry, api/*, and daemon packages to use the reference
package's types where applicable.
Update daemon package to use image/layer/tag stores instead of the graph
package
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
This commit enhance `docker network rm` command to allow user to delete
multi networks at the same time.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Fixes#16555
Original docker `cp` always copy symbol link itself instead of target,
now we provide '-L' option to allow docker to follow symbol link to real
target.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
* This commit will mark --before and --since as deprecated, but leave their behavior
unchanged until they are removed, then re-implement them as options for --filter.
* And update the related docs.
* Update the integration tests.
Fixes issue #17716
Signed-off-by: Wen Cheng Ma <wenchma@cn.ibm.com>
- isZeroValue function from upstream go
- covers booleans, strings and numbers
- change integration to reflect new behavior
- resolves#9406
Signed-off-by: Morgan Bauer <mbauer@us.ibm.com>
This fixes an issue where two images with the same filesystem contents
and configuration but different remote IDs could share a v1Compatibility
file, resulting in corrupted manifests.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Modified TestInspectApiCpusetInConfigPre120 and
TestContainerApiCreateWithCpuSharesCpuset for working on unicore cpu
environment.
Signed-off-by: Daehyeok Mun <daehyeok@gmail.com>
The test case creates a mount point, starts the daemon with the
graph dir pointing to the mount and initates a pull request. We should
be able to check for the error message when the mount point gets filled
during pull.
Signed-off-by: Anil Belur <askb23@gmail.com>
This change will allow us to run SELinux in a container with
BTRFS back end. We continue to work on fixing the kernel/BTRFS
but this change will allow SELinux Security separation on BTRFS.
It basically relabels the content on container creation.
Just relabling -init directory in BTRFS use case. Everything looks like it
works. I don't believe tar/achive stores the SELinux labels, so we are good
as far as docker commit.
Tested Speed on startup with BTRFS on top of loopback directory. BTRFS
not on loopback should get even better perfomance on startup time. The
more inodes inside of the container image will increase the relabel time.
This patch will give people who care more about security the option of
runnin BTRFS with SELinux. Those who don't want to take the slow down
can disable SELinux either in individual containers or for all containers
by continuing to disable SELinux in the daemon.
Without relabel:
> time docker run --security-opt label:disable fedora echo test
test
real 0m0.918s
user 0m0.009s
sys 0m0.026s
With Relabel
test
real 0m1.942s
user 0m0.007s
sys 0m0.030s
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
John Howard
Sebastiaan van Stijn
Wen Cheng Ma
Kai Qiang Wu(Kennan)
Zhang Wei
Antonio Murdaca
Federico Gimenez
Brian Goff
Christopher Jones
David Calavera
Vincent Demeester
Darren Stahl
Jess Frazelle
Arnaud Porterie
Doug Davis
cyli
Tibor Vass
Bryan Boreham
Lei Jitang
Aleksa Sarai
Madhu Venugopal
Antonio Murdaca
Shijiang Wei
Alessandro Boch
Tonis Tiigi
Stefan Scherer
Alexander Morozov
Aaron Lehmann
Santhosh Manohar
Morgan Bauer
Brian Bland
Sebastiaan van Stijn
yangshukui
Phil Estes
Riyaz Faizullabhoy
Ryan Belgrave
André Martins
Tibor Vass
Jessica Frazelle
Kim Eik
Euan
Stephen Rust
Phil Estes
Michael Crosby
Doug Davis
Anusha Ragunathan
Alexander Morozov
Mauricio Garavaglia
Qiang Huang
Daniel Nephin
Dan Walsh
Ma Shimiao
James Carey
Boaz Shuster
Aditi Rajagopal
Vincent Demeester
Christy Perez
Ahmet Alp Balkan
Derek McGowan
Vivek Goyal
Daehyeok Mun
Justas Brazauskas
Liron Levin
Daniel Nephin
Karol Duleba
Sally O'Malley
Shuwei Hao
Vincent Batts
Antonio Murdaca
Aidan Hobson Sayers
Eric Windisch
GoBella
Trevor Pounds
Kunal Kushwaha
Olle Jonsson
Anil Belur
Srini Brahmaroutu
David Lawrence
Mike Brown
Todd Whiteman
Mohammed Aaqib Ansari
Zuhayr Elahi