* Removed wrong information about container DNS
In the docs it says a container will inherit the host /etc/hosts file along with /etc/resolv.conf. While the latter part is correct, /etc/hosts will not actually be inherited, as reported https://github.com/moby/moby/issues/39311.
An additional line of text has been added to emphasize the fact that /etc/hosts are not inherited
* Removed extra hash on the run command redirect
* Update config/containers/container-networking.md
Co-authored-by: Sebastiaan van Stijn <thaJeztah@users.noreply.github.com>
Co-authored-by: Sebastiaan van Stijn <thaJeztah@users.noreply.github.com>
Adding `-it` on a "detached" (`-d`) container is needed
if the container's main process expects a TTY attached to keep
running.
It's not needed for a redis container, so we can remove it here
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- Move getting started overview to /get-started/overview/
- Move engine installation files under /engine/
- Redirect the top-level /install/ to /get-docker/
- Updated titles in left-hand navigation
- Added back some pages to the navigation that were
currently not included.
- Reduce some steps in the installation pages
- Move devicemapper prerequisites to the devicemapper
storage driver page.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
* Fix incorrect links in compose section
there's a bug causing wrapped links to not work, and replacing
some links to point to the .md file, so that IDE's can check
if the anchors are valid. Also replaced some links to point
to their new location.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
* engine/swarm: update links
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
* Fix various broken links
There's a bug in the "jekyll-relative-links" plugin that causes wrapped links to not work.
Also replacing some links to point to the .md file, so that IDE's can check if the anchors
are valid. Finally, replaced some links to point to their new locations, so that users don't
get redirected..
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
It was discovered that compression in gelf logging driver
is highly inefficient in terms of CPU. IOW, lots of CPU
is used when compression is enabled.
The natural solution would be to change the default
to `none`, i.e. no compression, but that would break
some setups (in particular, using Logstash < 7.4).
The only option left is to warn the user about the
consequences of leaving the compression enabled.
For more background details, please see
https://github.com/moby/moby/pull/40101
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
* Raw content addition
* Merge default-backend info here
* Moved to interlock-vip info
* Incorporate Euan's changes
Add examples for sticky_session_cookie and redirects
* Fix indentation issue
* 1013: Move desktop ent content to docs-private
* fix yaml spacing error
* 1013 - Fix ToC indentation, missing images
* 1010, 1011 - Update user instructions, add new screenshot
* update Jenkinsfile
* update jenkinsfile with very important protections
So we're lucky we're not using the master branch to update our swarm services here because if we someone had pushed to it, it would have triggered a docs.docker.com build. This is becuase this Jenkinsfile, which has been merged from the docker.github.io project has the content for updating docs.docker.com and not beta.docs.docker.com. Maria and I have worked out a potential solution to this problem and I hope to implement it today.
* Fix the DDE Overview ToC
* make Jenkinsfile serve private and public docs
After a couple of Jenkins-based mix-ups it became obvious we needed a Jenkinsfile that would serve both public and private projects, that we could move between repos without worry. This Jenkinsfile knows which images to build and push and which swarm services to update because of the use of git_url and branch conditions.
* make jenkinsfile serve private and public docs
After a couple of Jenkins-based mix-ups it became obvious we needed a Jenkinsfile that would serve both public and private projects, that we could move between repos without worry. This Jenkinsfile knows which images to build and push and which swarm services to update because of the use of git_url and branch conditions.
* Address review comments from Ben and GuillaumeT
* fix image path
* Fix review comments from Mathieu and Guillaume
* fix pending review comments
* Add documentation for --service-cluster-ip-range flag
https://github.com/docker/orca/pull/16417 adds support to make service cluster IP range subnet configurable for UCP install via the --service-cluster-ip-range flag
* Added a period.
* Add documentation for UCP install page
Signed-off-by: Arko Dasgupta <arko.dasgupta@docker.com>
* Add OS support statement
* Add Assemble docs
* Update ToC to include Assemble topics
* Remove version pack install section
* Adding APP CLI guide for customer beta2
Signed-off-by: Nigel Poulton <nigelpoulton@hotmail.com>
* Fix broken cross-refs
* fix the navigation
* Update version packs
The default version pack is now 3.0
We don't publicly advertise the Community version pack as its usage is for internal testing only.
Signed-off-by: Mathieu Champlon <mathieu.champlon@docker.com>
* bumped headings by one level + minor updates
* 1006 - Adding Docker Template content
* Update ToC to add Docker template entry
* Adding the CLI reference topic and an updated toc
* Added CLI reference, updated toc, fixed broken links
* replaced hardcoded names with 'username'
* Add registry-cli plugin reference
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
* Update docker_registry docs
* Add docker template reference docs
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
* Raw content addition
* Moved to interlock-vip info
* Fix indentation issue
* 1013: Move desktop ent content to docs-private
* fix yaml spacing error
* 1013 - Fix ToC indentation, missing images
* 1010, 1011 - Update user instructions, add new screenshot
* Fix the DDE Overview ToC
* Sync forked amberjack branch with docs-private (#1068)
* Service labels info
* Tuning info
* Update info
* New deploy landing page info
* Offline install info
* New production info
* New upgrade info
* New landing page info
* Canary info
* Context info
* Landing page info
* Interlock VIP mode info
* Labels reference info
* Redirects info
* Service clusters info
* Sessions info
* SSL info
* TLS info
* Websockets info
* Incorporated latest change from Netlify site
* Images
* Moved to images directory
* Moved info
* Moved info
* Moved info
* Moved info
* Moved info
* Changed default port based on github.io update
* Add HideInfoHeaders based on github.io update
* HideInfoHeaders in code sample
* Wording and tag updates
* Tag and link updates
* Fix some minor issues in vfs storage-driver section
- Fix mention of `storage-drivers` instead of `storage-opts`
- Repeat the selected driver in the second `daemon.json` example
- Remove mention of `CE` as this driver can be used
on Docker EE (although it's mainly intending for
debugging, so not a "supported" driver)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
* Wording cleanup
* Intra-doc links
* Link titles
* Wording and link changes
* Remove site URL from link path
* Removed Kube GC Known issue from UCP 3.1.4
* Update release-notes.md
DTR info
Edits on 2.5.10 and 2.6.4 entries
Add upgrade warning information
Updated engine info per Andrew's input
Added Component table info per Mark
* Update DTR release notes
* Fixed dates
* Fixed formatting issues
* Temporary - review later
* Remove stage compose file for docs-private
* Update compose-version to 1.24.0
https://github.com/docker/compose/releases/tag/1.24.0
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
* re-add removed Jenkinsfile
* Added moby#36951 to 18.09.4 release notes
* Wording and link updates
* Updated Offline Bundles for March Patch
* Update release notes for 1.23.2 and 1.24.0
Signed-off-by: Ulysses Souza <ulysses.souza@docker.com>
* Link to client bundle instructions
* Minor edits
- Moved dates to be consistent with other release notes
- Made grammar a little more consistent
* Update index.md : #### host or none - network (#8425)
* Update index.md : #### host or none - network
Choosing specific network for a build instead of the [network_mode]. network_mode doesn't work when providing a network for a particular build rather it skips the block and move to next service thus using network.
* Minor syntax updates
* Update index.md
those changes were a result of conflict that i tried to resolve.
* add slack webhook to Jenkinsfile
* add slack webhook to Jenkinsfile
* Update release-notes.md
* add slack webhook to Jenkinsfile
* Fix labels-reference link
* Add pip dependencies to compose doc for alpine (#8554)
* Add pip dependencies to compose doc for alpine
Signed-off-by: Ulysses Souza <ulysses.souza@docker.com>
* Minor edit
* Audit branch (#8564)
* Update trust-with-remote-ucp.md
* Fix link texts
* Addresses 8446
* Update trust_delegation.md
* - Addresses 8446
- Cleans up broken links
- Fixes vague link texts
Addresses 8446
Update trust_delegation.md
* Update running_ssh_service.md
* Update running_ssh_service.md
Fixed formatting and wording. Also moved note above the code.
* Update running_ssh_service.md
Fixed typo.
* Compose: Update build docs, Add --quiet flag
* Fix destroy reference page link
Relates to https://github.com/docker/docker.github.io/pull/8441
* Rephrase Ubuntu 14.04 note
* Revert "Compose: Update build docs, Add --quiet flag"
* # This is a combination of 4 commits.
- Addresses 8446
- Cleans up broken links
- Fixes vague link texts
Addresses 8446
Update trust_delegation.md
- Addresses 8446
- Cleans up broken links
- Fixes vague link texts
Addresses 8446
Update trust_delegation.md
Update trust-with-remote-ucp.md
- Addresses 8446
- Cleans up broken links
- Fixes vague link texts
Fix destroy reference page link
Relates to https://github.com/docker/docker.github.io/pull/8441
* - Addresses 8446
- Cleans up broken links
- Fixes vague link texts
* Addresses 8446 with text and link cleanup.
* Update syntax language from none to bash
* Update index.md
* Remove merge conflict
* Include Ubuntu version in Dockerfile
more recent versions of Ubuntu don't work with the given Dockerfile
* Adding Azure note (#8566)
* Adding Azure note
* Rephrase additional line and update link
* Fix typo
* Update configs.md
* Adding Azure note (#8566)
* Adding Azure note
* Rephrase additional line and update link
* Final edit
* Updated the 3.1.4 release notes to include Centos 7.6 support
* update jenkinsfile with very important protections
So we're lucky we're not using the master branch to update our swarm services here because if we someone had pushed to it, it would have triggered a docs.docker.com build. This is becuase this Jenkinsfile, which has been merged from the docker.github.io project has the content for updating docs.docker.com and not beta.docs.docker.com. Maria and I have worked out a potential solution to this problem and I hope to implement it today.
* add protection to Jenkinsfile
* fix git url protection in jenkinsfile
* typo fix
friendlyname -> friendlyhello
* Storage backend data migration updates
Fix incorrect API command, add backup updates
Update incorrect commands
* --unmanaged-cni is not a valid option for upgrade
* Update to UCP known issues
* Update UCP release notes
* Update release-notes.md
* make jenkinsfile serve private and public docs
After a couple of Jenkins-based mix-ups it became obvious we needed a Jenkinsfile that would serve both public and private projects, that we could move between repos without worry. This Jenkinsfile knows which images to build and push and which swarm services to update because of the use of git_url and branch conditions.
* make jenkinsfile serve private and public docs
After a couple of Jenkins-based mix-ups it became obvious we needed a Jenkinsfile that would serve both public and private projects, that we could move between repos without worry. This Jenkinsfile knows which images to build and push and which swarm services to update because of the use of git_url and branch conditions.
* make jenkinsfile serve private and public docs
After a couple of Jenkins-based mix-ups it became obvious we needed a Jenkinsfile that would serve both public and private projects, that we could move between repos without worry. This Jenkinsfile knows which images to build and push and which swarm services to update because of the use of git_url and branch conditions.
* Add HSTS warning for specifying --dtr-external-url
* Typo on logging driver name
* Addressed engineering feedback
* Netlify redirects interlock (#8595)
* Added netlify redirect
* Remove redundant "be"
* Update the "role-based access control" link
On page "https://docs.docker.com/ee/ucp/user-access/", update the hyperlink "role-based access control" to point to "https://docs.docker.com/ee/ucp/authorization/" instead of "https://docs.docker.com/ee/access-control".
* Add UCP user password limitation
* Revert "Updated the UCP 3.1.4 release notes to include Centos 7.6 support"
* Adding emphasis on Static IP requirement (#7276)
* Adding emphasis on Static IP requirement
We had a customer (00056641) who changed IPs like this all at once, and they are in a messy status. We should make it clear that static IP is absolutely required.
```***-ucp-0-dw original="10.15.89.6" updated="10.15.89.7"
***-ucp-1-dw original="10.15.89.5" updated="10.15.89.6"
***-ucp-2-dw original="10.15.89.7" updated="10.15.89.5" ```
* Link to prod requirement of static IP addresses
* Adding warning about layer7 config (#8617)
* Adding warning about layer7 config
Adding warning about layer7 config not being included in the backup
* Text edit
* Sync published with master (#8619)
* Update install.md
add note: 8 character password minimum length
* Include Ubuntu version in Dockerfile
more recent versions of Ubuntu don't work with the given Dockerfile
* Updated the 3.1.4 release notes to include Centos 7.6 support
* Remove redundant "be"
* Update the "role-based access control" link
On page "https://docs.docker.com/ee/ucp/user-access/", update the hyperlink "role-based access control" to point to "https://docs.docker.com/ee/ucp/authorization/" instead of "https://docs.docker.com/ee/access-control".
* Add UCP user password limitation
* Revert "Updated the UCP 3.1.4 release notes to include Centos 7.6 support"
* Adding emphasis on Static IP requirement (#7276)
* Adding emphasis on Static IP requirement
We had a customer (00056641) who changed IPs like this all at once, and they are in a messy status. We should make it clear that static IP is absolutely required.
```***-ucp-0-dw original="10.15.89.6" updated="10.15.89.7"
***-ucp-1-dw original="10.15.89.5" updated="10.15.89.6"
***-ucp-2-dw original="10.15.89.7" updated="10.15.89.5" ```
* Link to prod requirement of static IP addresses
* Adding warning about layer7 config (#8617)
* Adding warning about layer7 config
Adding warning about layer7 config not being included in the backup
* Text edit
* Add the 'Install on Azure' page back to the TOC for UCP 3.0 (#8623)
* Add the Install on Azure page back to the UCP 3.0 TOC
* Fix the copy / paste error on Install on UCP
* Fix Liquid syntax error in "reset user password"
```
Liquid Warning: Liquid syntax error (line 33): Expected end_of_string but found number in "{{ index .Spec.TaskTemplate.ContainerSpec.Args 0 }}" in ee/ucp/authorization/reset-user-password.md
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
* Fix link text
* Patch release notes 04 2019 (#8633)
* Add version update for Engine/UCP
* Add DTR version updates
* Added April Offline Bundles
* Engine release notes update
* Update release-notes.md
* Update release-notes.md
* Minor edit
* Minor edit
* Add 2.4.11 DTR info
* Remove statement about supporting CNI plugin (#8594)
* Remove statement about supporting CNI plugin
* Update install-cni-plugin.md
* Removing internal JIRA links
* Use site parameter to use latest compose file versions in examples (#8630)
* Use site parameter to use latest compose file versions in examples
Make sure that examples use the latest version of the compose file
format, to encourage using the latest version, and to prevent
users from running into "not supported by this version" problems
when copy/pasting, and combining examples that use different
versions.
Also add a note about `version: x` not being equivalent to
`version: x.latest`.
Note that there are still some examples using fixed versions
in the UCP sections; we need to evaluate those to make sure
the right (and supported) versions are used for UCP (which may
be different than "latest").
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
* Address some v3/v2 issues, and YAML syntax error
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
* Minor edit
* Final updates
- Added note around v2 and v3 versioning
- Updated note for v3 to match the v2 update
* compose-file: remove reference to custom init path (#8628)
* compose-file: remove reference to custom init path
This option was never functional, and was not intended
to be added to the "container create" API, so let's
remove it, because it has been removed in Docker 17.05,
and was broken in versions before that; see
- docker/docker-py#2309 Remove init_path from create
- moby/moby#32355 --init-path does not seem to work
- moby/moby#32470 remove --init-path from client
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
* Update index.md
* Remove extra which
Change below line
From
AUFS, which can suffer noticeable latencies when searching for files in images with many layers
To
AUFS can suffer noticeable latencies when searching for files in images with many layers
* Fix a broken link
* Add documentation for --service-cluster-ip-range flag
https://github.com/docker/orca/pull/16417 adds support to make service cluster IP range subnet configurable for UCP install via the --service-cluster-ip-range flag
* Added a period.
* Add documentation for UCP install page
Signed-off-by: Arko Dasgupta <arko.dasgupta@docker.com>
* Redirect to current version of page, since it's reached EOL
* Revert "Netlify redirects interlock (#8595)"
This reverts commit a7793edc74.
* UCP Install on Azure Patch (#8522)
* Fix grammar on the 2nd pre-req, and did markdown formatting on the rest :)
* Correct Pod-CIDR Warning
* Content cleanup
Please check that I haven't changed the meaning of the updated prerequisites.
* Create a new section on configuring the IP Count value, also responded to feedback from Follis, Steve R and Xinfeng.
* Incorporated Steven F's feedback and Issue 8551
* Provide a warning when setting a small IP Count variable
* Final edits
* Update install-on-azure.md
* Following feedback I have expanded on the 0644 azure.json file permissions and Added the --existing-config file to the UCP install command
* Removed Orchestrator Tag Pre Req from Azure Docs
* Clarifying need for 0644 permissions
* Improved backup commands (#8597)
* Improved backup commands
DTR image backup command improvements:
1. Local and NFS mount image backup commands were invalid (incorrectly used -C flag). Replaced them with commands that work.
2. The new commands automatically populate the correct replica ID and add a datestamp to the backup filename.
DTR Metadata backup command improvements:
DTR metadata backups are more difficult than they need to be and generate many support tickets. I updated the DTR command to avoid common user pitfalls:
1. The prior metadata backup command was subject to user error. Improved the command to automatically collect the DTR version and select a replica.
2. Improved security of the command by automatically collecting UCP CA certificate for verification rather than using --ucp-insecure-tls flag.
3. Improved the backup filename by adding the backed-up version information and date of backup. Knowledge of the version information is required for restoring a backup.
4. Described these improvements for the user.
Image backup commands were tested with local and NFS image storage. The metadata backup command was tested by running it directly on a DTR node and through a UCP client bundle with multiple replicas.
* Technical and editorial review
* More edits
* line 8; remove unnecessary a (#8672)
* line 8; remove unnecessary a
* Minor edit
* Updated the UCP Logging page to include UCP 3.1 screenshots (#8646)
* Added examples (#8599)
* Added examples
Added examples with more detail and automation to help customers backup DTR without creating support tickets.
* Linked to explanation of example command
@omegamormegil I removed the example with prepopulated fields, as I think it doesn't add much, and will only add confusion. Users who need this much detail can run the basic command and follow the terminal prompts.
We can re-add in a follow-up PR, if you think that example is crucial to this page.
* Remove deadlink in the Interlock ToC (#8668)
* Found a deadlink in the Interlock ToC
* Added Redirect
* Sync published with master (#8673)
* Revert "Netlify redirects interlock (#8595)"
This reverts commit a7793edc74.
* UCP Install on Azure Patch (#8522)
* Fix grammar on the 2nd pre-req, and did markdown formatting on the rest :)
* Correct Pod-CIDR Warning
* Content cleanup
Please check that I haven't changed the meaning of the updated prerequisites.
* Create a new section on configuring the IP Count value, also responded to feedback from Follis, Steve R and Xinfeng.
* Incorporated Steven F's feedback and Issue 8551
* Provide a warning when setting a small IP Count variable
* Final edits
* Update install-on-azure.md
* Following feedback I have expanded on the 0644 azure.json file permissions and Added the --existing-config file to the UCP install command
* Removed Orchestrator Tag Pre Req from Azure Docs
* Clarifying need for 0644 permissions
* Improved backup commands (#8597)
* Improved backup commands
DTR image backup command improvements:
1. Local and NFS mount image backup commands were invalid (incorrectly used -C flag). Replaced them with commands that work.
2. The new commands automatically populate the correct replica ID and add a datestamp to the backup filename.
DTR Metadata backup command improvements:
DTR metadata backups are more difficult than they need to be and generate many support tickets. I updated the DTR command to avoid common user pitfalls:
1. The prior metadata backup command was subject to user error. Improved the command to automatically collect the DTR version and select a replica.
2. Improved security of the command by automatically collecting UCP CA certificate for verification rather than using --ucp-insecure-tls flag.
3. Improved the backup filename by adding the backed-up version information and date of backup. Knowledge of the version information is required for restoring a backup.
4. Described these improvements for the user.
Image backup commands were tested with local and NFS image storage. The metadata backup command was tested by running it directly on a DTR node and through a UCP client bundle with multiple replicas.
* Technical and editorial review
* More edits
* line 8; remove unnecessary a (#8672)
* line 8; remove unnecessary a
* Minor edit
* Updated the UCP Logging page to include UCP 3.1 screenshots (#8646)
* Added examples (#8599)
* Added examples
Added examples with more detail and automation to help customers backup DTR without creating support tickets.
* Linked to explanation of example command
@omegamormegil I removed the example with prepopulated fields, as I think it doesn't add much, and will only add confusion. Users who need this much detail can run the basic command and follow the terminal prompts.
We can re-add in a follow-up PR, if you think that example is crucial to this page.
* Remove deadlink in the Interlock ToC (#8668)
* Found a deadlink in the Interlock ToC
* Added Redirect
* Published (#8674)
* add slack webhook to Jenkinsfile
* make jenkinsfile serve private and public docs
After a couple of Jenkins-based mix-ups it became obvious we needed a Jenkinsfile that would serve both public and private projects, that we could move between repos without worry. This Jenkinsfile knows which images to build and push and which swarm services to update because of the use of git_url and branch conditions.
* Sync published with master (#8619)
* Update install.md
add note: 8 character password minimum length
* Include Ubuntu version in Dockerfile
more recent versions of Ubuntu don't work with the given Dockerfile
* Updated the 3.1.4 release notes to include Centos 7.6 support
* Remove redundant "be"
* Update the "role-based access control" link
On page "https://docs.docker.com/ee/ucp/user-access/", update the hyperlink "role-based access control" to point to "https://docs.docker.com/ee/ucp/authorization/" instead of "https://docs.docker.com/ee/access-control".
* Add UCP user password limitation
* Revert "Updated the UCP 3.1.4 release notes to include Centos 7.6 support"
* Adding emphasis on Static IP requirement (#7276)
* Adding emphasis on Static IP requirement
We had a customer (00056641) who changed IPs like this all at once, and they are in a messy status. We should make it clear that static IP is absolutely required.
```***-ucp-0-dw original="10.15.89.6" updated="10.15.89.7"
***-ucp-1-dw original="10.15.89.5" updated="10.15.89.6"
***-ucp-2-dw original="10.15.89.7" updated="10.15.89.5" ```
* Link to prod requirement of static IP addresses
* Adding warning about layer7 config (#8617)
* Adding warning about layer7 config
Adding warning about layer7 config not being included in the backup
* Text edit
* Sync published with master (#8673)
* Revert "Netlify redirects interlock (#8595)"
This reverts commit a7793edc74.
* UCP Install on Azure Patch (#8522)
* Fix grammar on the 2nd pre-req, and did markdown formatting on the rest :)
* Correct Pod-CIDR Warning
* Content cleanup
Please check that I haven't changed the meaning of the updated prerequisites.
* Create a new section on configuring the IP Count value, also responded to feedback from Follis, Steve R and Xinfeng.
* Incorporated Steven F's feedback and Issue 8551
* Provide a warning when setting a small IP Count variable
* Final edits
* Update install-on-azure.md
* Following feedback I have expanded on the 0644 azure.json file permissions and Added the --existing-config file to the UCP install command
* Removed Orchestrator Tag Pre Req from Azure Docs
* Clarifying need for 0644 permissions
* Improved backup commands (#8597)
* Improved backup commands
DTR image backup command improvements:
1. Local and NFS mount image backup commands were invalid (incorrectly used -C flag). Replaced them with commands that work.
2. The new commands automatically populate the correct replica ID and add a datestamp to the backup filename.
DTR Metadata backup command improvements:
DTR metadata backups are more difficult than they need to be and generate many support tickets. I updated the DTR command to avoid common user pitfalls:
1. The prior metadata backup command was subject to user error. Improved the command to automatically collect the DTR version and select a replica.
2. Improved security of the command by automatically collecting UCP CA certificate for verification rather than using --ucp-insecure-tls flag.
3. Improved the backup filename by adding the backed-up version information and date of backup. Knowledge of the version information is required for restoring a backup.
4. Described these improvements for the user.
Image backup commands were tested with local and NFS image storage. The metadata backup command was tested by running it directly on a DTR node and through a UCP client bundle with multiple replicas.
* Technical and editorial review
* More edits
* line 8; remove unnecessary a (#8672)
* line 8; remove unnecessary a
* Minor edit
* Updated the UCP Logging page to include UCP 3.1 screenshots (#8646)
* Added examples (#8599)
* Added examples
Added examples with more detail and automation to help customers backup DTR without creating support tickets.
* Linked to explanation of example command
@omegamormegil I removed the example with prepopulated fields, as I think it doesn't add much, and will only add confusion. Users who need this much detail can run the basic command and follow the terminal prompts.
We can re-add in a follow-up PR, if you think that example is crucial to this page.
* Remove deadlink in the Interlock ToC (#8668)
* Found a deadlink in the Interlock ToC
* Added Redirect
* Trying to fix command rendering of '--format "{{ .Names }}"' (#8678)
* Trying to fix command rendering of '--format "{{ .Names }}"'
--format "{{ .Names }}" is showing up in the markup but is rendering as --format "" in the published version. Added {% raw %} tags to try to fix.
* Fixed heading inconsistency
* Trying to fix command rendering of '--format "{{ .Names }}"' (#8677)
* Trying to fix command rendering of '--format "{{ .Names }}"'
--format "{{ .Names }}" is showing up in the markup but is rendering as --format "" in the published version. Added {% raw %} tags to try to fix.
* Update concatenated to chained
* Minor fix
* interlock --> ucp-interlock (#8675)
* interlock --> ucp-interlock
* Fixed code samples
- Use the latest UCP version and the latest ucp-interlock image
- Leverage ucp page version Jekyll variable
* Typo
* Final syntax fix
* Update backup.md
* Sync published with master (#8685)
* Revert "Netlify redirects interlock (#8595)"
This reverts commit a7793edc74.
* UCP Install on Azure Patch (#8522)
* Fix grammar on the 2nd pre-req, and did markdown formatting on the rest :)
* Correct Pod-CIDR Warning
* Content cleanup
Please check that I haven't changed the meaning of the updated prerequisites.
* Create a new section on configuring the IP Count value, also responded to feedback from Follis, Steve R and Xinfeng.
* Incorporated Steven F's feedback and Issue 8551
* Provide a warning when setting a small IP Count variable
* Final edits
* Update install-on-azure.md
* Following feedback I have expanded on the 0644 azure.json file permissions and Added the --existing-config file to the UCP install command
* Removed Orchestrator Tag Pre Req from Azure Docs
* Clarifying need for 0644 permissions
* Improved backup commands (#8597)
* Improved backup commands
DTR image backup command improvements:
1. Local and NFS mount image backup commands were invalid (incorrectly used -C flag). Replaced them with commands that work.
2. The new commands automatically populate the correct replica ID and add a datestamp to the backup filename.
DTR Metadata backup command improvements:
DTR metadata backups are more difficult than they need to be and generate many support tickets. I updated the DTR command to avoid common user pitfalls:
1. The prior metadata backup command was subject to user error. Improved the command to automatically collect the DTR version and select a replica.
2. Improved security of the command by automatically collecting UCP CA certificate for verification rather than using --ucp-insecure-tls flag.
3. Improved the backup filename by adding the backed-up version information and date of backup. Knowledge of the version information is required for restoring a backup.
4. Described these improvements for the user.
Image backup commands were tested with local and NFS image storage. The metadata backup command was tested by running it directly on a DTR node and through a UCP client bundle with multiple replicas.
* Technical and editorial review
* More edits
* line 8; remove unnecessary a (#8672)
* line 8; remove unnecessary a
* Minor edit
* Updated the UCP Logging page to include UCP 3.1 screenshots (#8646)
* Added examples (#8599)
* Added examples
Added examples with more detail and automation to help customers backup DTR without creating support tickets.
* Linked to explanation of example command
@omegamormegil I removed the example with prepopulated fields, as I think it doesn't add much, and will only add confusion. Users who need this much detail can run the basic command and follow the terminal prompts.
We can re-add in a follow-up PR, if you think that example is crucial to this page.
* Remove deadlink in the Interlock ToC (#8668)
* Found a deadlink in the Interlock ToC
* Added Redirect
* Published (#8674)
* add slack webhook to Jenkinsfile
* make jenkinsfile serve private and public docs
After a couple of Jenkins-based mix-ups it became obvious we needed a Jenkinsfile that would serve both public and private projects, that we could move between repos without worry. This Jenkinsfile knows which images to build and push and which swarm services to update because of the use of git_url and branch conditions.
* Sync published with master (#8619)
* Update install.md
add note: 8 character password minimum length
* Include Ubuntu version in Dockerfile
more recent versions of Ubuntu don't work with the given Dockerfile
* Updated the 3.1.4 release notes to include Centos 7.6 support
* Remove redundant "be"
* Update the "role-based access control" link
On page "https://docs.docker.com/ee/ucp/user-access/", update the hyperlink "role-based access control" to point to "https://docs.docker.com/ee/ucp/authorization/" instead of "https://docs.docker.com/ee/access-control".
* Add UCP user password limitation
* Revert "Updated the UCP 3.1.4 release notes to include Centos 7.6 support"
* Adding emphasis on Static IP requirement (#7276)
* Adding emphasis on Static IP requirement
We had a customer (00056641) who changed IPs like this all at once, and they are in a messy status. We should make it clear that static IP is absolutely required.
```***-ucp-0-dw original="10.15.89.6" updated="10.15.89.7"
***-ucp-1-dw original="10.15.89.5" updated="10.15.89.6"
***-ucp-2-dw original="10.15.89.7" updated="10.15.89.5" ```
* Link to prod requirement of static IP addresses
* Adding warning about layer7 config (#8617)
* Adding warning about layer7 config
Adding warning about layer7 config not being included in the backup
* Text edit
* Sync published with master (#8673)
* Revert "Netlify redirects interlock (#8595)"
This reverts commit a7793edc74.
* UCP Install on Azure Patch (#8522)
* Fix grammar on the 2nd pre-req, and did markdown formatting on the rest :)
* Correct Pod-CIDR Warning
* Content cleanup
Please check that I haven't changed the meaning of the updated prerequisites.
* Create a new section on configuring the IP Count value, also responded to feedback from Follis, Steve R and Xinfeng.
* Incorporated Steven F's feedback and Issue 8551
* Provide a warning when setting a small IP Count variable
* Final edits
* Update install-on-azure.md
* Following feedback I have expanded on the 0644 azure.json file permissions and Added the --existing-config file to the UCP install command
* Removed Orchestrator Tag Pre Req from Azure Docs
* Clarifying need for 0644 permissions
* Improved backup commands (#8597)
* Improved backup commands
DTR image backup command improvements:
1. Local and NFS mount image backup commands were invalid (incorrectly used -C flag). Replaced them with commands that work.
2. The new commands automatically populate the correct replica ID and add a datestamp to the backup filename.
DTR Metadata backup command improvements:
DTR metadata backups are more difficult than they need to be and generate many support tickets. I updated the DTR command to avoid common user pitfalls:
1. The prior metadata backup command was subject to user error. Improved the command to automatically collect the DTR version and select a replica.
2. Improved security of the command by automatically collecting UCP CA certificate for verification rather than using --ucp-insecure-tls flag.
3. Improved the backup filename by adding the backed-up version information and date of backup. Knowledge of the version information is required for restoring a backup.
4. Described these improvements for the user.
Image backup commands were tested with local and NFS image storage. The metadata backup command was tested by running it directly on a DTR node and through a UCP client bundle with multiple replicas.
* Technical and editorial review
* More edits
* line 8; remove unnecessary a (#8672)
* line 8; remove unnecessary a
* Minor edit
* Updated the UCP Logging page to include UCP 3.1 screenshots (#8646)
* Added examples (#8599)
* Added examples
Added examples with more detail and automation to help customers backup DTR without creating support tickets.
* Linked to explanation of example command
@omegamormegil I removed the example with prepopulated fields, as I think it doesn't add much, and will only add confusion. Users who need this much detail can run the basic command and follow the terminal prompts.
We can re-add in a follow-up PR, if you think that example is crucial to this page.
* Remove deadlink in the Interlock ToC (#8668)
* Found a deadlink in the Interlock ToC
* Added Redirect
* Trying to fix command rendering of '--format "{{ .Names }}"' (#8678)
* Trying to fix command rendering of '--format "{{ .Names }}"'
--format "{{ .Names }}" is showing up in the markup but is rendering as --format "" in the published version. Added {% raw %} tags to try to fix.
* Fixed heading inconsistency
* Trying to fix command rendering of '--format "{{ .Names }}"' (#8677)
* Trying to fix command rendering of '--format "{{ .Names }}"'
--format "{{ .Names }}" is showing up in the markup but is rendering as --format "" in the published version. Added {% raw %} tags to try to fix.
* Update concatenated to chained
* Minor fix
* interlock --> ucp-interlock (#8675)
* interlock --> ucp-interlock
* Fixed code samples
- Use the latest UCP version and the latest ucp-interlock image
- Leverage ucp page version Jekyll variable
* Typo
* Final syntax fix
* Update backup.md
* Removed Reference to Interlock Preview Image, and added relevant UCP Image Org and Tag
* Fix syntax error which caused the master build to fail
* Preview page.ucp_org output
* Sync published with master (#8693) (#8694)
* Adding Azure note (#8566)
* Adding Azure note
* Rephrase additional line and update link
* Revert "Netlify redirects interlock (#8595)"
This reverts commit a7793edc74.
* UCP Install on Azure Patch (#8522)
* Fix grammar on the 2nd pre-req, and did markdown formatting on the rest :)
* Correct Pod-CIDR Warning
* Content cleanup
Please check that I haven't changed the meaning of the updated prerequisites.
* Create a new section on configuring the IP Count value, also responded to feedback from Follis, Steve R and Xinfeng.
* Incorporated Steven F's feedback and Issue 8551
* Provide a warning when setting a small IP Count variable
* Final edits
* Update install-on-azure.md
* Following feedback I have expanded on the 0644 azure.json file permissions and Added the --existing-config file to the UCP install command
* Removed Orchestrator Tag Pre Req from Azure Docs
* Clarifying need for 0644 permissions
* Improved backup commands (#8597)
* Improved backup commands
DTR image backup command improvements:
1. Local and NFS mount image backup commands were invalid (incorrectly used -C flag). Replaced them with commands that work.
2. The new commands automatically populate the correct replica ID and add a datestamp to the backup filename.
DTR Metadata backup command improvements:
DTR metadata backups are more difficult than they need to be and generate many support tickets. I updated the DTR command to avoid common user pitfalls:
1. The prior metadata backup command was subject to user error. Improved the command to automatically collect the DTR version and select a replica.
2. Improved security of the command by automatically collecting UCP CA certificate for verification rather than using --ucp-insecure-tls flag.
3. Improved the backup filename by adding the backed-up version information and date of backup. Knowledge of the version information is required for restoring a backup.
4. Described these improvements for the user.
Image backup commands were tested with local and NFS image storage. The metadata backup command was tested by running it directly on a DTR node and through a UCP client bundle with multiple replicas.
* Technical and editorial review
* More edits
* line 8; remove unnecessary a (#8672)
* line 8; remove unnecessary a
* Minor edit
* Updated the UCP Logging page to include UCP 3.1 screenshots (#8646)
* Added examples (#8599)
* Added examples
Added examples with more detail and automation to help customers backup DTR without creating support tickets.
* Linked to explanation of example command
@omegamormegil I removed the example with prepopulated fields, as I think it doesn't add much, and will only add confusion. Users who need this much detail can run the basic command and follow the terminal prompts.
We can re-add in a follow-up PR, if you think that example is crucial to this page.
* Remove deadlink in the Interlock ToC (#8668)
* Found a deadlink in the Interlock ToC
* Added Redirect
* Published (#8674)
* add slack webhook to Jenkinsfile
* make jenkinsfile serve private and public docs
After a couple of Jenkins-based mix-ups it became obvious we needed a Jenkinsfile that would serve both public and private projects, that we could move between repos without worry. This Jenkinsfile knows which images to build and push and which swarm services to update because of the use of git_url and branch conditions.
* Sync published with master (#8619)
* Update install.md
add note: 8 character password minimum length
* Include Ubuntu version in Dockerfile
more recent versions of Ubuntu don't work with the given Dockerfile
* Updated the 3.1.4 release notes to include Centos 7.6 support
* Remove redundant "be"
* Update the "role-based access control" link
On page "https://docs.docker.com/ee/ucp/user-access/", update the hyperlink "role-based access control" to point to "https://docs.docker.com/ee/ucp/authorization/" instead of "https://docs.docker.com/ee/access-control".
* Add UCP user password limitation
* Revert "Updated the UCP 3.1.4 release notes to include Centos 7.6 support"
* Adding emphasis on Static IP requirement (#7276)
* Adding emphasis on Static IP requirement
We had a customer (00056641) who changed IPs like this all at once, and they are in a messy status. We should make it clear that static IP is absolutely required.
```***-ucp-0-dw original="10.15.89.6" updated="10.15.89.7"
***-ucp-1-dw original="10.15.89.5" updated="10.15.89.6"
***-ucp-2-dw original="10.15.89.7" updated="10.15.89.5" ```
* Link to prod requirement of static IP addresses
* Adding warning about layer7 config (#8617)
* Adding warning about layer7 config
Adding warning about layer7 config not being included in the backup
* Text edit
* Sync published with master (#8673)
* Revert "Netlify redirects interlock (#8595)"
This reverts commit a7793edc74.
* UCP Install on Azure Patch (#8522)
* Fix grammar on the 2nd pre-req, and did markdown formatting on the rest :)
* Correct Pod-CIDR Warning
* Content cleanup
Please check that I haven't changed the meaning of the updated prerequisites.
* Create a new section on configuring the IP Count value, also responded to feedback from Follis, Steve R and Xinfeng.
* Incorporated Steven F's feedback and Issue 8551
* Provide a warning when setting a small IP Count variable
* Final edits
* Update install-on-azure.md
* Following feedback I have expanded on the 0644 azure.json file permissions and Added the --existing-config file to the UCP install command
* Removed Orchestrator Tag Pre Req from Azure Docs
* Clarifying need for 0644 permissions
* Improved backup commands (#8597)
* Improved backup commands
DTR image backup command improvements:
1. Local and NFS mount image backup commands were invalid (incorrectly used -C flag). Replaced them with commands that work.
2. The new commands automatically populate the correct replica ID and add a datestamp to the backup filename.
DTR Metadata backup command improvements:
DTR metadata backups are more difficult than they need to be and generate many support tickets. I updated the DTR command to avoid common user pitfalls:
1. The prior metadata backup command was subject to user error. Improved the command to automatically collect the DTR version and select a replica.
2. Improved security of the command by automatically collecting UCP CA certificate for verification rather than using --ucp-insecure-tls flag.
3. Improved the backup filename by adding the backed-up version information and date of backup. Knowledge of the version information is required for restoring a backup.
4. Described these improvements for the user.
Image backup commands were tested with local and NFS image storage. The metadata backup command was tested by running it directly on a DTR node and through a UCP client bundle with multiple replicas.
* Technical and editorial review
* More edits
* line 8; remove unnecessary a (#8672)
* line 8; remove unnecessary a
* Minor edit
* Updated the UCP Logging page to include UCP 3.1 screenshots (#8646)
* Added examples (#8599)
* Added examples
Added examples with more detail and automation to help customers backup DTR without creating support tickets.
* Linked to explanation of example command
@omegamormegil I removed the example with prepopulated fields, as I think it doesn't add much, and will only add confusion. Users who need this much detail can run the basic command and follow the terminal prompts.
We can re-add in a follow-up PR, if you think that example is crucial to this page.
* Remove deadlink in the Interlock ToC (#8668)
* Found a deadlink in the Interlock ToC
* Added Redirect
* Trying to fix command rendering of '--format "{{ .Names }}"' (#8678)
* Trying to fix command rendering of '--format "{{ .Names }}"'
--format "{{ .Names }}" is showing up in the markup but is rendering as --format "" in the published version. Added {% raw %} tags to try to fix.
* Fixed heading inconsistency
* Trying to fix command rendering of '--format "{{ .Names }}"' (#8677)
* Trying to fix command rendering of '--format "{{ .Names }}"'
--format "{{ .Names }}" is showing up in the markup but is rendering as --format "" in the published version. Added {% raw %} tags to try to fix.
* Update concatenated to chained
* Minor fix
* interlock --> ucp-interlock (#8675)
* interlock --> ucp-interlock
* Fixed code samples
- Use the latest UCP version and the latest ucp-interlock image
- Leverage ucp page version Jekyll variable
* Typo
* Final syntax fix
* Update backup.md
* Removed Reference to Interlock Preview Image, and added relevant UCP Image Org and Tag
* Fix syntax error which caused the master build to fail
* docs: fix typo in removal of named volumes (#8686)
* Updated the ToC for Upgrading Interlock
* Removed the Previous Interlock SSL Page
* Moved Redirect to latest page
* Update index.md (#8690)
Fix typo - missing word.
* Update bind-mounts.md (#8696)
* Minor edits (#8708)
* Minor edits
- Standardized setting of replica ID as per @caervs
- Fix broken link
* Consistency edits
- Standardized setting of replica ID
- Added note that this command only works on Linux
* Standardize replica setting
- Update commands for creating tar files for local and NFS-mounted images
* Fixed broken 'important changes' link (#8721)
* Interlock fix - remove haproxy and custom template files (#8722)
* Removed haproxy and custom template info
* Delete file
* Delete file
* Render DTR version (#8726)
* Release notes for 2.0.4.0 win (Edge)
Signed-off-by: Mathieu Champlon <mathieu.champlon@docker.com>
* Release notes for 2.0.4.0 mac (Edge)
Signed-off-by: Mathieu Champlon <mathieu.champlon@docker.com>
* Update-edge-release-notes.md
Minor updates to the proposed content. Looks good otherwise.
* Updated edge-release-notes (Windows)
Minor edits
* Added Docker-Compose awslogs example (#8638)
* Added docker compose aws logs information
* Fixed formatting and text
- Signed off by @bermudezmt
* Fix: duplicate paragraph `depends_on` (#8539)
* Fix: duplicate paragraph `depends_on`
Amend duplicate paragraph `depends_on` in Compose file reference doc.
* Fix: add missing blank line
* Updated Engine/DTR/UCP version info (#8744)
* Updated Engine/DTR/UCP version info
* Fixed version
* Updates for May patch
* Release notes update (May) (#8763)
* Latest info including known issues
* Updates for 2.6.6, 2.5.11, 2.4.12
* Added 18.09.6 updates
* Added link
* Fixed link error
* Syntax error
* 2.6.6 info cleanup
* Added Hub info
* Added Hub info for 2.6.6
* Added Hub info for 3.1.7
* Link fix
* Update line items for DTR 2.6.6
* Add line break after Known Issues
- Affects 2.5.11.
* Edit line items
Minor edits and formatting fixes
* Remove outdated links/fix links (#8760)
* Fix dates
* Fix dates
* Fix dates
* Fixed syntax error (#8732)
* Fixed syntax error
Last edit to the REPLICA_ID command introduced a syntax error by adding an extra ')'. Removed it.
* Fix replica ID setting examples
- Accept suggestion from @thajeztah based on product testing
- Apply change to page examples
- Remove NFS backup example based on the following errors:
tar: /var/lib/docker/volumes/dtr-registry-nfs-36e6bf87816d: Cannot stat: No such file or directory
tar: Exiting with failure status due to previous errors
* Update header for example tar
* Fixed link title
* Fixed link title
* Added new example and deprecation info (#8773)
* Updated multi-stage build doc (#8769)
Changed the 'as' keyword to 'AS' to match the Dockerfile reference docs here: https://docs.docker.com/engine/reference/builder/#from
* Fix typo (#8766)
* Fixed a sentence (#8728)
* Fixed a sentence
* Minor edit
* Update configure-tls.md (#8719)
* Update upgrade.md (#8718)
* Update index.md (#8717)
* Update configure-tls.md (#8716)
* Add TOC entry for Hub page title change (#8777)
* Update upgrade.md
* Fix left navigation TOC
* Update get-started.md (#8713)
* Update tmpfs.md (#8711)
* Add an indentation in compose-gettingstarted.md (#8487)
* Add an indentation
* Fix messaging on service dependencies
* Sync master with published (#8779)
* Sync published with master (#8693)
* Adding Azure note (#8566)
* Adding Azure note
* Rephrase additional line and update link
* Revert "Netlify redirects interlock (#8595)"
This reverts commit a7793edc74.
* UCP Install on Azure Patch (#8522)
* Fix grammar on the 2nd pre-req, and did markdown formatting on the rest :)
* Correct Pod-CIDR Warning
* Content cleanup
Please check that I haven't changed the meaning of the updated prerequisites.
* Create a new section on configuring the IP Count value, also responded to feedback from Follis, Steve R and Xinfeng.
* Incorporated Steven F's feedback and Issue 8551
* Provide a warning when setting a small IP Count variable
* Final edits
* Update install-on-azure.md
* Following feedback I have expanded on the 0644 azure.json file permissions and Added the --existing-config file to the UCP install command
* Removed Orchestrator Tag Pre Req from Azure Docs
* Clarifying need for 0644 permissions
* Improved backup commands (#8597)
* Improved backup commands
DTR image backup command improvements:
1. Local and NFS mount image backup commands were invalid (incorrectly used -C flag). Replaced them with commands that work.
2. The new commands automatically populate the correct replica ID and add a datestamp to the backup filename.
DTR Metadata backup command improvements:
DTR metadata backups are more difficult than they need to be and generate many support tickets. I updated the DTR command to avoid common user pitfalls:
1. The prior metadata backup command was subject to user error. Improved the command to automatically collect the DTR version and select a replica.
2. Improved security of the command by automatically collecting UCP CA certificate for verification rather than using --ucp-insecure-tls flag.
3. Improved the backup filename by adding the backed-up version information and date of backup. Knowledge of the version information is required for restoring a backup.
4. Described these improvements for the user.
Image backup commands were tested with local and NFS image storage. The metadata backup command was tested by running it directly on a DTR node and through a UCP client bundle with multiple replicas.
* Technical and editorial review
* More edits
* line 8; remove unnecessary a (#8672)
* line 8; remove unnecessary a
* Minor edit
* Updated the UCP Logging page to include UCP 3.1 screenshots (#8646)
* Added examples (#8599)
* Added examples
Added examples with more detail and automation to help customers backup DTR without creating support tickets.
* Linked to explanation of example command
@omegamormegil I removed the example with prepopulated fields, as I think it doesn't add much, and will only add confusion. Users who need this much detail can run the basic command and follow the terminal prompts.
We can re-add in a follow-up PR, if you think that example is crucial to this page.
* Remove deadlink in the Interlock ToC (#8668)
* Found a deadlink in the Interlock ToC
* Added Redirect
* Published (#8674)
* add slack webhook to Jenkinsfile
* make jenkinsfile serve private and public docs
After a couple of Jenkins-based mix-ups it became obvious we needed a Jenkinsfile that would serve both public and private projects, that we could move between repos without worry. This Jenkinsfile knows which images to build and push and which swarm services to update because of the use of git_url and branch conditions.
* Sync published with master (#8619)
* Update install.md
add note: 8 character password minimum length
* Include Ubuntu version in Dockerfile
more recent versions of Ubuntu don't work with the given Dockerfile
* Updated the 3.1.4 release notes to include Centos 7.6 support
* Remove redundant "be"
* Update the "role-based access control" link
On page "https://docs.docker.com/ee/ucp/user-access/", update the hyperlink "role-based access control" to point to "https://docs.docker.com/ee/ucp/authorization/" instead of "https://docs.docker.com/ee/access-control".
* Add UCP user password limitation
* Revert "Updated the UCP 3.1.4 release notes to include Centos 7.6 support"
* Adding emphasis on Static IP requirement (#7276)
* Adding emphasis on Static IP requirement
We had a customer (00056641) who changed IPs like this all at once, and they are in a messy status. We should make it clear that static IP is absolutely required.
```***-ucp-0-dw original="10.15.89.6" updated="10.15.89.7"
***-ucp-1-dw original="10.15.89.5" updated="10.15.89.6"
***-ucp-2-dw original="10.15.89.7" updated="10.15.89.5" ```
* Link to prod requirement of static IP addresses
* Adding warning about layer7 config (#8617)
* Adding warning about layer7 config
Adding warning about layer7 config not being included in the backup
* Text edit
* Sync published with master (#8673)
* Revert "Netlify redirects interlock (#8595)"
This reverts commit a7793edc74.
* UCP Install on Azure Patch (#8522)
* Fix grammar on the 2nd pre-req, and did markdown formatting on the rest :)
* Correct Pod-CIDR Warning
* Content cleanup
Please check that I haven't changed the meaning of the updated prerequisites.
* Create a new section on configuring the IP Count value, also responded to feedback from Follis, Steve R and Xinfeng.
* Incorporated Steven F's feedback and Issue 8551
* Provide a warning when setting a small IP Count variable
* Final edits
* Update install-on-azure.md
* Following feedback I have expanded on the 0644 azure.json file permissions and Added the --existing-config file to the UCP install command
* Removed Orchestrator Tag Pre Req from Azure Docs
* Clarifying need for 0644 permissions
* Improved backup commands (#8597)
* Improved backup commands
DTR image backup command improvements:
1. Local and NFS mount image backup commands were invalid (incorrectly used -C flag). Replaced them with commands that work.
2. The new commands automatically populate the correct replica ID and add a datestamp to the backup filename.
DTR Metadata backup command improvements:
DTR metadata backups are more difficult than they need to be and generate many support tickets. I updated the DTR command to avoid common user pitfalls:
1. The prior metadata backup command was subject to user error. Improved the command to automatically collect the DTR version and select a replica.
2. Improved security of the command by automatically collecting UCP CA certificate for verification rather than using --ucp-insecure-tls flag.
3. Improved the backup filename by adding the backed-up version information and date of backup. Knowledge of the version information is required for restoring a backup.
4. Described these improvements for the user.
Image backup commands were tested with local and NFS image storage. The metadata backup command was tested by running it directly on a DTR node and through a UCP client bundle with multiple replicas.
* Technical and editorial review
* More edits
* line 8; remove unnecessary a (#8672)
* line 8; remove unnecessary a
* Minor edit
* Updated the UCP Logging page to include UCP 3.1 screenshots (#8646)
* Added examples (#8599)
* Added examples
Added examples with more detail and automation to help customers backup DTR without creating support tickets.
* Linked to explanation of example command
@omegamormegil I removed the example with prepopulated fields, as I think it doesn't add much, and will only add confusion. Users who need this much detail can run the basic command and follow the terminal prompts.
We can re-add in a follow-up PR, if you think that example is crucial to this page.
* Remove deadlink in the Interlock ToC (#8668)
* Found a deadlink in the Interlock ToC
* Added Redirect
* Trying to fix command rendering of '--format "{{ .Names }}"' (#8678)
* Trying to fix command rendering of '--format "{{ .Names }}"'
--format "{{ .Names }}" is showing up in the markup but is rendering as --format "" in the published version. Added {% raw %} tags to try to fix.
* Fixed heading inconsistency
* Trying to fix command rendering of '--format "{{ .Names }}"' (#8677)
* Trying to fix command rendering of '--format "{{ .Names }}"'
--format "{{ .Names }}" is showing up in the markup but is rendering as --format "" in the published version. Added {% raw %} tags to try to fix.
* Update concatenated to chained
* Minor fix
* interlock --> ucp-interlock (#8675)
* interlock --> ucp-interlock
* Fixed code samples
- Use the latest UCP version and the latest ucp-interlock image
- Leverage ucp page version Jekyll variable
* Typo
* Final syntax fix
* Update backup.md
* Removed Reference to Interlock Preview Image, and added relevant UCP Image Org and Tag
* Fix syntax error which caused the master build to fail
* Sync published with master (#8695)
* Sync published with master (#8693) (#8694)
* Adding Azure note (#8566)
* Adding Azure note
* Rephrase additional line and update link
* Revert "Netlify redirects interlock (#8595)"
This reverts commit a7793edc74.
* UCP Install on Azure Patch (#8522)
* Fix grammar on the 2nd pre-req, and did markdown formatting on the rest :)
* Correct Pod-CIDR Warning
* Content cleanup
Please check that I haven't changed the meaning of the updated prerequisites.
* Create a new section on configuring the IP Count value, also responded to feedback from Follis, Steve R and Xinfeng.
* Incorporated Steven F's feedback and Issue 8551
* Provide a warning when setting a small IP Count variable
* Final edits
* Update install-on-azure.md
* Following feedback I have expanded on the 0644 azure.json file permissions and Added the --existing-config file to the UCP install command
* Removed Orchestrator Tag Pre Req from Azure Docs
* Clarifying need for 0644 permissions
* Improved backup commands (#8597)
* Improved backup commands
DTR image backup command improvements:
1. Local and NFS mount image backup commands were invalid (incorrectly used -C flag). Replaced them with commands that work.
2. The new commands automatically populate the correct replica ID and add a datestamp to the backup filename.
DTR Metadata backup command improvements:
DTR metadata backups are more difficult than they need to be and generate many support tickets. I updated the DTR command to avoid common user pitfalls:
1. The prior metadata backup command was subject to user error. Improved the command to automatically collect the DTR version and select a replica.
2. Improved security of the command by automatically collecting UCP CA certificate for verification rather than using --ucp-insecure-tls flag.
3. Improved the backup filename by adding the backed-up version information and date of backup. Knowledge of the version information is required for restoring a backup.
4. Described these improvements for the user.
Image backup commands were tested with local and NFS image storage. The metadata backup command was tested by running it directly on a DTR node and through a UCP client bundle with multiple replicas.
* Technical and editorial review
* More edits
* line 8; remove unnecessary a (#8672)
* line 8; remove unnecessary a
* Minor edit
* Updated the UCP Logging page to include UCP 3.1 screenshots (#8646)
* Added examples (#8599)
* Added examples
Added examples with more detail and automation to help customers backup DTR without creating support tickets.
* Linked to explanation of example command
@omegamormegil I removed the example with prepopulated fields, as I think it doesn't add much, and will only add confusion. Users who need this much detail can run the basic command and follow the terminal prompts.
We can re-add in a follow-up PR, if you think that example is crucial to this page.
* Remove deadlink in the Interlock ToC (#8668)
* Found a deadlink in the Interlock ToC
* Added Redirect
* Published (#8674)
* add slack webhook to Jenkinsfile
* make jenkinsfile serve private and public docs
After a couple of Jenkins-based mix-ups it became obvious we needed a Jenkinsfile that would serve both public and private projects, that we could move between repos without worry. This Jenkinsfile knows which images to build and push and which swarm services to update because of the use of git_url and branch conditions.
* Sync published with master (#8619)
* Update install.md
add note: 8 character password minimum length
* Include Ubuntu version in Dockerfile
more recent versions of Ubuntu don't work with the given Dockerfile
* Updated the 3.1.4 release notes to include Centos 7.6 support
* Remove redundant "be"
* Update the "role-based access control" link
On page "https://docs.docker.com/ee/ucp/user-access/", update the hyperlink "role-based access control" to point to "https://docs.docker.com/ee/ucp/authorization/" instead of "https://docs.docker.com/ee/access-control".
* Add UCP user password limitation
* Revert "Updated the UCP 3.1.4 release notes to include Centos 7.6 support"
* Adding emphasis on Static IP requirement (#7276)
* Adding emphasis on Static IP requirement
We had a customer (00056641) who changed IPs like this all at once, and they are in a messy status. We should make it clear that static IP is absolutely required.
```***-ucp-0-dw original="10.15.89.6" updated="10.15.89.7"
***-ucp-1-dw original="10.15.89.5" updated="10.15.89.6"
***-ucp-2-dw original="10.15.89.7" updated="10.15.89.5" ```
* Link to prod requirement of static IP addresses
* Adding warning about layer7 config (#8617)
* Adding warning about layer7 config
Adding warning about layer7 config not being included in the backup
* Text edit
* Sync published with master (#8673)
* Revert "Netlify redirects interlock (#8595)"
This reverts commit a7793edc74.
* UCP Install on Azure Patch (#8522)
* Fix grammar on the 2nd pre-req, and did markdown formatting on the rest :)
* Correct Pod-CIDR Warning
* Content cleanup
Please check that I haven't changed the meaning of the updated prerequisites.
* Create a new section on configuring the IP Count value, also responded to feedback from Follis, Steve R and Xinfeng.
* Incorporated Steven F's feedback and Issue 8551
* Provide a warning when setting a small IP Count variable
* Final edits
* Update install-on-azure.md
* Following feedback I have expanded on the 0644 azure.json file permissions and Added the --existing-config file to the UCP install command
* Removed Orchestrator Tag Pre Req from Azure Docs
* Clarifying need for 0644 permissions
* Improved backup commands (#8597)
* Improved backup commands
DTR image backup command improvements:
1. Local and NFS mount image backup commands were invalid (incorrectly used -C flag). Replaced them with commands that work.
2. The new commands automatically populate the correct replica ID and add a datestamp to the backup filename.
DTR Metadata backup command improvements:
DTR metadata backups are more difficult than they need to be and generate many support tickets. I updated the DTR command to avoid common user pitfalls:
1. The prior metadata backup command was subject to user error. Improved the command to automatically collect the DTR version and select a replica.
2. Improved security of the command by automatically collecting UCP CA certificate for verification rather than using --ucp-insecure-tls flag.
3. Improved the backup filename by adding the backed-up version information and date of backup. Knowledge of the version information is required for restoring a backup.
4. Described these improvements for the user.
Image backup commands were tested with local and NFS image storage. The metadata backup command was tested by running it directly on a DTR node and through a UCP client bundle with multiple replicas.
* Technical and editorial review
* More edits
* line 8; remove unnecessary a (#8672)
* line 8; remove unnecessary a
* Minor edit
* Updated the UCP Logging page to include UCP 3.1 screenshots (#8646)
* Added examples (#8599)
* Added examples
Added examples with more detail and automation to help customers backup DTR without creating support tickets.
* Linked to explanation of example command
@omegamormegil I removed the example with prepopulated fields, as I think it doesn't add much, and will only add confusion. Users who need this much detail can run the basic command and follow the terminal prompts.
We can re-add in a follow-up PR, if you think that example is crucial to this page.
* Remove deadlink in the Interlock ToC (#8668)
* Found a deadlink in the Interlock ToC
* Added Redirect
* Trying to fix command rendering of '--format "{{ .Names }}"' (#8678)
* Trying to fix command rendering of '--format "{{ .Names }}"'
--format "{{ .Names }}" is showing up in the markup but is rendering as --format "" in the published version. Added {% raw %} tags to try to fix.
* Fixed heading inconsistency
* Trying to fix command rendering of '--format "{{ .Names }}"' (#8677)
* Trying to fix command rendering of '--format "{{ .Names }}"'
--format "{{ .Names }}" is showing up in the markup but is rendering as --format "" in the published version. Added {% raw %} tags to try to fix.
* Update concatenated to chained
* Minor fix
* interlock --> ucp-interlock (#8675)
* interlock --> ucp-interlock
* Fixed code samples
- Use the latest UCP version and the latest ucp-interlock image
- Leverage ucp page version Jekyll variable
* Typo
* Final syntax fix
* Update backup.md
* Removed Reference to Interlock Preview Image, and added relevant UCP Image Org and Tag
* Fix syntax error which caused the master build to fail
* docs: fix typo in removal of named volumes (#8686)
* Sync published with master (#8709)
* Sync published with master (#8693) (#8694)
* Adding Azure note (#8566)
* Rephrase additional line and update link
* Revert "Netlify redirects interlock (#8595)"
This reverts commit a7793edc74.
* UCP Install on Azure Patch (#8522)
* Improved backup commands (#8597)
* Improved backup commands
DTR image backup command improvements:
1. Local and NFS mount image ba…
* Follow-up cleanup (#1069)
* Delete interlock_service_clusters.png~HEAD
* Delete interlock_service_clusters.png~Raw content addition
* Clean up interlock files for Amberjack
* Remove merge markers in toc.yml
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
* Add correct UCP interlock TOC entries
Fingers crossed on this one - did it from the browser. :D
* added api reference, fixed tech review comments
* Added patch release changelogs
* Update docker cli reference for 19.03
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
* SAML SCIM update (#1073)
* Added SCIM entry
* SCIM content
* Updates per Ryan's feedback
* Removed delete
* Update per Ryan's feedback
* Minor wording changes
* Additional endpoints added
* Update per Ryan's feedback
* Metadata updates
* Anchor links added
* Updates per Maria
* Adding links to Docker for Mac and Windows Community content
* OSCAL TOC entry (#1083)
* Added Docker Desktop Enterprise 2.0.0.4-ent changelogs
Signed-off-by: Ulrich VACHON <ulrich.vachon@docker.com>
* minor updates to the public beta release notes
* gMSA info (#1074)
* Added gMSA note.
* Added gMSA bullet
* Added gMSA info
* Changes per Drew's feedback
* Updates per Drew's feedback
* Moved content per feedback
* Moved content per feedback
* Updates per Drew's feedback
* Update per feedback
* Update release-notes.md
* Update release notes
Public beta
* iSCSI info (#1075)
* Added raw content
* Added iscsi options
* Added iSCSI entry
* Images
* Clean up
* Updates per feedback
* Updates per Anusha
* Update to iscsi parameter
* Added updates per Deep's feedback
* Updates per Deep's feedback
* Updated iSCSI parameter description
* Update page versions for UCP and DTR
Sobhan Attar
Magno Logan
mjchi7
Sebastiaan van Stijn
Randy von der Weide
Sebastiaan van Stijn
ajay143444
Batuhan Apaydın
Usha Mandya
haikuoliu
Dawn W Docker
Adrian Plata
Kir Kolyshkin
Fangzhou Li
Jintao Zhang
Adrian Plata
Hong Chun
Alexander Wellbrock
Bertrand Guay-Paquet
ollypom
Ray Tung
Robert Cohn
Maria Bermudez
paigehargrave
Maria Bermudez