Since 1.9, Docker Content Trust Offline key has been renamed to
Root key and the Tagging key has been renamed to Repository key.
The corresponding environment variables
`DOCKER_CONTENT_TRUST_OFFLINE_PASSPHRASE`
`DOCKER_CONTENT_TRUST_TAGGING_PASSPHRASE`
have also been deprecated and renamed to
`DOCKER_CONTENT_TRUST_ROOT_PASSPHRASE`
`DOCKER_CONTENT_TRUST_REPOSITORY_PASSPHRASE`
This fix removed the deprecated ENV passphrase variables for
1.12 and updated the docs.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
The jsonlog logger currently allows specifying envs and labels that
should be propagated to the log message, however there has been no way
to read that back.
This adds a new API option to enable inserting these attrs back to the
log reader.
With timestamps, this looks like so:
```
92016-04-08T15:28:09.835913720Z foo=bar,hello=world hello
```
The extra attrs are comma separated before the log message but after
timestamps.
Without timestaps it looks like so:
```
foo=bar,hello=world hello
```
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Currently on kernels booted without the "cgroup_enable=memory" kernel
parameter the testcase TestApiStatsContainerGetMemoryLimit fails with:
FAIL: docker_api_stats_test.go:231: TestApiStatsContainerGetMemoryLimit.pN52_github_com_docker_docker_integration_cli.DockerSuite
docker_api_stats_test.go:256:
c.Assert(fmt.Sprintf("%d", v.MemoryStats.Limit), checker.Equals, fmt.Sprintf("%d", info.MemTotal))
... obtained string = "0"
... expected string = "33759145984"
Fix this and skip the testcase if the kernel does not support cgroup memory
limit. In that case the output would be:
SKIP: docker_api_stats_test.go:231:
TestApiStatsContainerGetMemoryLimit.pN52_github_com_docker_docker_integration_cli.DockerSuite
(Test requires an environment that supports cgroup memory limit.)
ChangeLog:
----------
v4: Move TestApiStatsContainerGetMemoryLimit to docker_api_stats_unix_test.go
v3: Use existing "memoryLimitSupport" from requirements_unix.go
v2: Move check to requirements.go
Fixes#22477
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
This fix tries to addess the issue in #21956 where `docker inspect`
will overwrite the log config options with default option even when
the `--log-driver` is not empty and `--log-opt` is empty. In this
situation, `docker inspect` and `docker run` is different.
With the introduction of #21153, the `HostConfig` will always have
the correct log-driver and log-opt values.
However, the previous processing of `docker inspect` was not updated
after the change in #21153. This results in the incorrect behavior.
This fix addresses this issue by updating `docker inspect` to conform
to #21153 so the the behavior of `docker inspect` and `docker run` is
consistent.
A integration test has been added to cover this fix.
This fix fixes#21956. This fix is related to #21153.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This add a new filter to 'docker network ls'
to allow filtering by driver-name.
Contrary to "ID" and "name" filters, this
filter only supports an *exact* match.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This generates an ID string for calls to Mount/Unmount, allowing drivers
to differentiate between two callers of `Mount` and `Unmount`.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
TestBuildNotVerboseFailure use a non-exist image busybox1,
it requires network connection to access to Dockerhub, skip
this test if there is no network.
Signed-off-by: Lei Jitang <leijitang@huawei.com>
"TestRestartContainerwithRestartPolicy" contains some codes that could be
flaky, it's supposed to be fixed in #22256.
This commit removes unnecessary code, make the test case cleaner.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
This fix tries to address the issue raised in #22271 where
relative symlinks don't work with --device argument.
Previously, the symlinks in --device was implemneted (#20684)
with `os.Readlink()` which does not resolve if the linked
target is a relative path. In this fix, `filepath.EvalSymlinks()`
has been used which will reolve correctly with relative
paths.
An additional test case has been added to the existing
`TestRunDeviceSymlink` to cover changes in this fix.
This fix is related to #13840 and #20684, #22271.
This fix fixes#22271.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the inconsistency in #22036 where labels
set on the command line will not override labels specified in
Dockerfile, but will override labels inherited from `FROM` images.
The fix add a LABEL with command line options at the end of the
processed Dockerfile so that command line options labels always
override the LABEL in Dockerfiles (or through `FROM`).
An integration test has been added for test cases specified in #22036.
This fix fixes#22036.
NOTE: Some changes are from #22266 (@tiborvass).
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue in #22244 where the remote
API `/auth` will not set the default value of `serveraddress`
if not provided. This behavior happens after only in 1.11.0
and is a regression as in 1.10.3 `serveraddress` will be assigned
with `IndexServer` if no value is provided.
The default value `IndexServer` is assigned to `serveraddress` if
no value provided in this fix.
An integration test `TestAuthApi` has been added to cover this change
This fix fixes#22244.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Add a proxy to support 'docker daemon'
Fix configFile option, and remove a test that is no longer relevant.
Remove daemon build tag.
Remove DOCKER_CLIENTONLY from build scripts.
Signed-off-by: Daniel Nephin <dnephin@docker.com>
Change docker-daemon to dockerd.
Signed-off-by: Daniel Nephin <dnephin@docker.com>
There was an error in validation logic before, should use period
instead of quota, and also add check for negative
number here, if not with that, it would had cpu.cfs_period_us: invalid argument
which is not good for users.
Signed-off-by: Kai Qiang Wu(Kennan) <wkqwu@cn.ibm.com>
This fix tries to fix the http panics caused by container deletion
with empty names in #22210.
The issue was because when an empty string was passed, `GetByName()`
tried to access the first element of the name string without checking
the length. A length check has been added.
A test case for #22210 has been added.
This fix fixes#22210.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
when it is passed with bad arguments and no arguments. This patch would divide the total number of commands into five sets and runs them in parallel.
Test time is improved from around 9 seconds to around 3 seconds
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Why? Because the `mount` here will sometimes fail when run in
`debian:jessie`, which is what the environrment hosting the test suite
is running if run from the `Makefile`.
Also, why the heck not containerize it, all the things.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
link feature in docker0 bridge by default provides short-id as a
container alias. With built-in SD feature, providing a container
short-id as a network alias will fill that gap.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
This patch did following:
1) Make filter check logic same as `docker ps ` filters
Right now docker container logic work as following:
when same filter used like below:
-f name=jack -f name=tom
it would get all containers name is jack or tom(it is or logic)
when different filter used like below:
-f name=jack -f id=7d1
it would get all containers name is jack and id contains 7d1(it is and logic)
It would make sense in many user cases, but it did lack of compliate filter cases,
like "I want to get containers name is jack or id=7d1", it could work around use
(get id=7d1 containers' name and get name=jack containers, and then construct the
final containers, they could be done in user side use shell or rest API)
2) Fix one network filter bug which could include duplicate result
when use -f name= -f id=, it would get duplicate results
3) Make id filter same as container id filter, which means match any string.
not use prefix match.
It is for consistent match logic
Closes: #21417
Signed-off-by: Kai Qiang Wu(Kennan) <wkqwu@cn.ibm.com>
The `Status` field is a `map[string]interface{}` which allows the driver to pass
back low-level details about the underlying volume.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This test was flaky on ppc64le, where the average time to close was
around 1 second. This bumps that timeout to 60 seconds which should be
plently.
Signed-off-by: Christopher Jones <tophj@linux.vnet.ibm.com>
Using new methods from engine-api, that make it clearer which element is
required when consuming the API.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
If contaner start fail of (say) "command not found", the container
actually didn't start at all, we shouldn't log start and die event for
it, because that doesnt actually happen.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
If a build context tar has path names of the form 'x/./y', they will be
stored in this unnormalized form internally by tarsum. When the builder
walks the untarred directory tree and queries hashes for each relative
path, it will query paths of the form 'x/y', and they will not be found.
To correct this, have tarsum normalize path names by calling Clean.
Add a test to detect this caching false positive.
Fixes#21715
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This change allow to filter events that happened in the past
without waiting for future events. Example:
docker events --since -1h --until -30m
Signed-off-by: David Calavera <david.calavera@gmail.com>
Before this patch, containers are silently removed from the stats list
on error. This patch instead will display `--` for all fields for the
container that had the error, allowing it to recover from errors.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Implements a `CachedPath` function on the volume plugin adapter that we
call from the volume list function instead of `Path.
If a driver does not implement `CachedPath` it will just call `Path`.
Also makes sure we store the path on Mount and remove the path on
Unmount.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This patch will allow users to specify namespace specific "kernel parameters"
for running inside of a container.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Currently if you restart docker daemon, all the containers with restart
policy `on-failure` regardless of its `RestartCount` will be started,
this will make daemon cost more extra time for restart.
This commit will stop these containers to do unnecessary start on
daemon's restart.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
This fix tries to fix the issue in #21848 where `docker stats` will not correctly
display the container stats in case the container reuse another container's
network stack.
The issue is that when `stats` is performed, the daemon will check for container
network setting's `SandboxID`. Unfortunately, for containers that reuse another
container's network stack (`NetworkMode.IsConnected()`), SandboxID is not assigned.
Therefore, the daemon thinks the id is invalid and remote API will never return.
This fix tries to resolve the SandboxID by iterating through connected containers
and identify the appropriate SandboxID.
A test case for `stats` remote API has been added to check if `stats` will return
within the timeout.
This fix fixes#21848.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Yong Tang
Vincent Demeester
Brian Goff
Tonis Tiigi
John Howard
Alexander Morozov
Michael Holzheu
Antonio Murdaca
Aaron Lehmann
Liron Levin
Shijiang Wei
Sebastiaan van Stijn
Sebastiaan van Stijn
Lei Jitang
Kai Qiang Wu(Kennan)
Michael Crosby
Zhang Wei
allencloud
Tibor Vass
John Howard
Daniel Nephin
David Calavera
Madhu Venugopal
Sainath Grandhi
Wen Cheng Ma
Doug Davis
Christopher Jones
Dan Walsh
Rodolfo Carvalho