--- advisory: swarm-standalone description: Use overlay for multi-host networking keywords: Examples, Usage, network, docker, documentation, user guide, multihost, cluster title: Multi-host networking with standalone swarms redirect_from: - /engine/userguide/networking/overlay-standalone-swarm/ - /network/overlay-standalone.swarm/ --- ## Standalone swarm only! This article only applies to users who need to use a standalone swarm with Docker, as opposed to swarm mode. Standalone swarms (sometimes known as Swarm Classic) rely on an external key-value store to store networking information. Docker swarm mode stores networking information in the Raft logs on the swarm managers. If you use swarm mode, see [swarm mode networking](/engine/swarm/networking.md) instead of this article. Users of Universal Control Plane **do** use an external key-value store, but UCP manages it for you, and you do not need to manually intervene. If you run into issues with the key-value store, see [Troubleshoot the etcd key-value store](/datacenter/ucp/2.2/guides/admin/monitor-and-troubleshoot/troubleshoot-configurations.md#troubleshoot-the-etcd-key-value-store) If you are using standalone swarms and not using UCP, this article may be useful to you. This article uses an example to explain the basics of creating a multi-host network using a standalone swarm and the `overlay` network driver. Unlike `bridge` networks, overlay networks require some pre-existing conditions before you can create one: ## Overlay networking with an external key-value store To use Docker with an external key-value store, you need the following: * Access to the key-value store. Docker supports Consul, Etcd, and ZooKeeper (Distributed store) key-value stores. This example uses Consul. * A cluster of hosts with connectivity to the key-value store. * Docker running on each host in the cluster. * Hosts within the cluster must have unique hostnames because the key-value store uses the hostnames to identify cluster members. Docker Machine and Docker Swarm are not mandatory to experience Docker multi-host networking with a key-value store. However, this example uses them to illustrate how they are integrated. You use Machine to create both the key-value store server and the host cluster using a standalone swarm. >**Note**: These examples are not relevant to Docker running in swarm mode and > do not work in such a configuration. ### Prerequisites Before you begin, make sure you have a system on your network with the latest version of Docker and Docker Machine installed. The example also relies on VirtualBox. If you installed on a Mac or Windows with Docker Toolbox, you have all of these installed already. If you have not already done so, make sure you upgrade Docker and Docker Machine to the latest versions. ### Set up a key-value store An overlay network requires a key-value store. The key-value store holds information about the network state which includes discovery, networks, endpoints, IP addresses, and more. Docker supports Consul, Etcd, and ZooKeeper key-value stores. This example uses Consul. 1. Log into a system prepared with Docker and Docker Machine installed. 2. Provision a VirtualBox machine called `mh-keystore`. ```bash $ docker-machine create -d virtualbox mh-keystore ``` When you provision a new machine, the process adds Docker to the host. This means rather than installing Consul manually, you can create an instance using the [consul image from Docker Hub](https://hub.docker.com/_/consul/). You do this in the next step. 3. Set your local environment to the `mh-keystore` machine. ```bash $ eval "$(docker-machine env mh-keystore)" ``` 4. Start a `consul` container running on the `mh-keystore` Docker machine. ```bash $ docker run -d \ --name consul \ -p "8500:8500" \ -h "consul" \ consul agent -server -bootstrap -client "0.0.0.0" ``` The client starts a `consul` image running in the `mh-keystore` Docker machine. The server is called `consul` and is listening on port `8500`. 5. Run the `docker ps` command to see the `consul` container. ```bash $ docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES a47492d6c4d1 consul "docker-entrypoint..." 2 seconds ago Up 1 second 8300-8302/tcp, 8301-8302/udp, 8600/tcp, 8600/udp, 0.0.0.0:8500->8500/tcp consul ``` Keep your terminal open and move on to [Create a swarm cluster](#create-a-swarm-cluster). ### Create a swarm cluster In this step, you use `docker-machine` to provision the hosts for your network. You don't actually create the network yet. You create several Docker machines in VirtualBox. One of the machines acts as the swarm manager and you create that first. As you create each host, you pass the Docker daemon on that machine options that are needed by the `overlay` network driver. > **Note**: This creates a standalone swarm cluster, rather than using Docker > in swarm mode. These examples are not relevant to Docker running in swarm mode > and do not work in such a configuration. 1. Create a swarm manager. ```bash $ docker-machine create \ -d virtualbox \ --swarm --swarm-master \ --swarm-discovery="consul://$(docker-machine ip mh-keystore):8500" \ --engine-opt="cluster-store=consul://$(docker-machine ip mh-keystore):8500" \ --engine-opt="cluster-advertise=eth1:2376" \ mhs-demo0 ``` At creation time, you supply the Docker daemon with the `--cluster-store` option. This option tells the Engine the location of the key-value store for the `overlay` network. The bash expansion `$(docker-machine ip mh-keystore)` resolves to the IP address of the Consul server you created in "STEP 1". The `--cluster-advertise` option advertises the machine on the network. 2. Create another host and add it to the swarm. ```bash $ docker-machine create -d virtualbox \ --swarm \ --swarm-discovery="consul://$(docker-machine ip mh-keystore):8500" \ --engine-opt="cluster-store=consul://$(docker-machine ip mh-keystore):8500" \ --engine-opt="cluster-advertise=eth1:2376" \ mhs-demo1 ``` 3. List your Docker machines to confirm they are all up and running. ```bash $ docker-machine ls NAME ACTIVE DRIVER STATE URL SWARM default - virtualbox Running tcp://192.168.99.100:2376 mh-keystore * virtualbox Running tcp://192.168.99.103:2376 mhs-demo0 - virtualbox Running tcp://192.168.99.104:2376 mhs-demo0 (master) mhs-demo1 - virtualbox Running tcp://192.168.99.105:2376 mhs-demo0 ``` At this point you have a set of hosts running on your network. You are ready to create a multi-host network for containers using these hosts. Leave your terminal open and go on to [Create the overlay network](#create-the-overlay-network). ### Create the overlay network To create an overlay network: 1. Set your docker environment to the swarm manager. ```bash $ eval $(docker-machine env --swarm mhs-demo0) ``` Using the `--swarm` flag with `docker-machine` restricts the `docker` commands to swarm information alone. 2. Use the `docker info` command to view the swarm. ```bash $ docker info Containers: 3 Images: 2 Role: primary Strategy: spread Filters: affinity, health, constraint, port, dependency Nodes: 2 mhs-demo0: 192.168.99.104:2376 └ Containers: 2 └ Reserved CPUs: 0 / 1 └ Reserved Memory: 0 B / 1.021 GiB └ Labels: executiondriver=native-0.2, kernelversion=4.1.10-boot2docker, operatingsystem=Boot2Docker 1.9.0 (TCL 6.4); master : 4187d2c - Wed Oct 14 14:00:28 UTC 2015, provider=virtualbox, storagedriver=aufs mhs-demo1: 192.168.99.105:2376 └ Containers: 1 └ Reserved CPUs: 0 / 1 └ Reserved Memory: 0 B / 1.021 GiB └ Labels: executiondriver=native-0.2, kernelversion=4.1.10-boot2docker, operatingsystem=Boot2Docker 1.9.0 (TCL 6.4); master : 4187d2c - Wed Oct 14 14:00:28 UTC 2015, provider=virtualbox, storagedriver=aufs CPUs: 2 Total Memory: 2.043 GiB Name: 30438ece0915 ``` This output shows that you are running three containers and two images on the manager. 3. Create your `overlay` network. ```bash $ docker network create --driver overlay --subnet=10.0.9.0/24 my-net ``` You only need to create the network on a single host in the cluster. In this case, you used the swarm manager but you could easily have run it on any host in the swarm. > **Note**: It is highly recommended to use the `--subnet` option when creating > a network. If the `--subnet` is not specified, Docker automatically > chooses and assigns a subnet for the network and it could overlap with another subnet > in your infrastructure that is not managed by Docker. Such overlaps can cause > connectivity issues or failures when containers are connected to that network. 4. Check that the network exists: ```bash $ docker network ls NETWORK ID NAME DRIVER 412c2496d0eb mhs-demo1/host host dd51763e6dd2 mhs-demo0/bridge bridge 6b07d0be843f my-net overlay b4234109bd9b mhs-demo0/none null 1aeead6dd890 mhs-demo0/host host d0bb78cbe7bd mhs-demo1/bridge bridge 1c0eb8f69ebb mhs-demo1/none null ``` Since you are in the swarm manager environment, you see all the networks on all the swarm participants: the default networks on each Docker daemon and the single overlay network. Each network has a unique ID and a namespaced name. 5. Switch to each swarm agent in turn and list the networks. ```bash $ eval $(docker-machine env mhs-demo0) $ docker network ls NETWORK ID NAME DRIVER 6b07d0be843f my-net overlay dd51763e6dd2 bridge bridge b4234109bd9b none null 1aeead6dd890 host host $ eval $(docker-machine env mhs-demo1) $ docker network ls NETWORK ID NAME DRIVER d0bb78cbe7bd bridge bridge 1c0eb8f69ebb none null 412c2496d0eb host host 6b07d0be843f my-net overlay ``` Both agents report they have the `my-net` network with the `6b07d0be843f` ID. You now have a multi-host container network running! ### Run an application on your network Once your network is created, you can start a container on any of the hosts and it automatically is part of the network. 1. Set your environment to the swarm manager. ```bash $ eval $(docker-machine env --swarm mhs-demo0) ``` 2. Start an Nginx web server on the `mhs-demo0` instance. ```bash $ docker run -itd \ --name=web \ --network=my-net \ --env="constraint:node==mhs-demo0" \ nginx:alpine ``` 4. Run a `busybox` instance on the `mhs-demo1` instance and get the contents of the Nginx server's home page. ```none $ docker run -it --rm \ --network=my-net \ --env="constraint:node==mhs-demo1" \ busybox wget -O- http://web Unable to find image 'busybox:latest' locally latest: Pulling from library/busybox ab2b8a86ca6c: Pull complete 2c5ac3f849df: Pull complete Digest: sha256:5551dbdfc48d66734d0f01cafee0952cb6e8eeecd1e2492240bf2fd9640c2279 Status: Downloaded newer image for busybox:latest Connecting to web (10.0.9.2:80) Welcome to nginx!

Welcome to nginx!

If you see this page, the nginx web server is successfully installed and working. Further configuration is required.

For online documentation and support, refer to nginx.org.
Commercial support is available at nginx.com.

Thank you for using nginx.

- 100% |*******************************| 612 0:00:00 ETA ``` ### Check external connectivity As you've seen, Docker's built-in overlay network driver provides out-of-the-box connectivity between the containers on multiple hosts within the same network. Additionally, containers connected to the multi-host network are automatically connected to the `docker_gwbridge` network. This network allows the containers to have external connectivity outside of their cluster. 1. Change your environment to the swarm agent. ```bash $ eval $(docker-machine env mhs-demo1) ``` 2. View the `docker_gwbridge` network, by listing the networks. ```bash $ docker network ls NETWORK ID NAME DRIVER 6b07d0be843f my-net overlay dd51763e6dd2 bridge bridge b4234109bd9b none null 1aeead6dd890 host host e1dbd5dff8be docker_gwbridge bridge ``` 3. Repeat steps 1 and 2 on the swarm manager. ```bash $ eval $(docker-machine env mhs-demo0) $ docker network ls NETWORK ID NAME DRIVER 6b07d0be843f my-net overlay d0bb78cbe7bd bridge bridge 1c0eb8f69ebb none null 412c2496d0eb host host 97102a22e8d2 docker_gwbridge bridge ``` 2. Check the Nginx container's network interfaces. ```bash $ docker container exec web ip addr 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 22: eth0: mtu 1450 qdisc noqueue state UP group default link/ether 02:42:0a:00:09:03 brd ff:ff:ff:ff:ff:ff inet 10.0.9.2/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::42:aff:fe00:903/64 scope link valid_lft forever preferred_lft forever 24: eth1: mtu 1500 qdisc noqueue state UP group default link/ether 02:42:ac:12:00:02 brd ff:ff:ff:ff:ff:ff inet 172.18.0.2/16 scope global eth1 valid_lft forever preferred_lft forever inet6 fe80::42:acff:fe12:2/64 scope link valid_lft forever preferred_lft forever ``` The `eth0` interface represents the container interface that is connected to the `my-net` overlay network. While the `eth1` interface represents the container interface that is connected to the `docker_gwbridge` network. ## Use Docker Compose with swarm classic Refer to the Networking feature introduced in [Compose V2 format](/compose/networking/) and execute the multi-host networking scenario in the swarm cluster used above. ## Next steps - [Networking overview](/network/index.md) - [Overlay networks](/network/overlay.md)