# Skipper Canary Deployments

This guide shows you how to use the [Skipper ingress controller](https://opensource.zalando.com/skipper/kubernetes/ingress-controller/) and Flagger to automate canary deployments.

![Flagger Skipper Ingress Controller](https://raw.githubusercontent.com/fluxcd/flagger/main/docs/diagrams/flagger-skipper-overview.png)

## Prerequisites

Flagger requires a Kubernetes cluster **v1.19** or newer and Skipper ingress **v0.13** or newer.

Install Skipper ingress-controller using [upstream definition](https://opensource.zalando.com/skipper/kubernetes/ingress-controller/#install-skipper-as-ingress-controller).

Certain arguments are relevant:

```yaml
- -enable-connection-metrics
- -histogram-metric-buckets=.01,1,10,100
- -kubernetes
- -kubernetes-in-cluster
- -kubernetes-path-mode=path-prefix
- -metrics-exp-decay-sample
- -metrics-flavour=prometheus
- -route-backend-metrics
- -route-backend-error-counters
- -route-response-metrics
- -serve-host-metrics
- -serve-route-metrics
- -whitelisted-healthcheck-cidr=0.0.0.0/0 # permit Kind source health checks
```

Install Flagger using kustomize:

```bash
kustomize build https://github.com/fluxcd/flagger/kustomize/kubernetes | kubectl apply -f -
```

## Bootstrap

Flagger takes a Kubernetes deployment and optionally a horizontal pod autoscaler (HPA),
then creates a series of objects (Kubernetes deployments, ClusterIP services and canary ingress).
These objects expose the application outside the cluster and drive the canary analysis and promotion.

Create a test namespace:

```bash
kubectl create ns test
```

Create a deployment and a horizontal pod autoscaler:

```bash
kubectl apply -k https://github.com/fluxcd/flagger//kustomize/podinfo?ref=main
```

Deploy the load testing service to generate traffic during the canary analysis:

```bash
helm upgrade -i flagger-loadtester flagger/loadtester \
--namespace=test
```

Create an ingress definition \(replace `app.example.com` with your own domain\):

```yaml
apiVersion: networking.k8s.io/v1
kind: Ingress
metadata:
  name: podinfo
  namespace: test
  labels:
    app: podinfo
  annotations:
    kubernetes.io/ingress.class: "skipper"
spec:
  rules:
    - host: "app.example.com"
      http:
        paths:
          - pathType: Prefix
            path: "/"
            backend:
              service:
                name: podinfo
                port:
                  number: 80
```

Save the above resource as podinfo-ingress.yaml and then apply it:

```bash
kubectl apply -f ./podinfo-ingress.yaml
```

Create a canary custom resource (replace `app.example.com` with your own domain):

```yaml
apiVersion: flagger.app/v1beta1
kind: Canary
metadata:
  name: podinfo
  namespace: test
spec:
  provider: skipper
  # deployment reference
  targetRef:
    apiVersion: apps/v1
    kind: Deployment
    name: podinfo
  # ingress reference
  ingressRef:
    apiVersion: networking.k8s.io/v1
    kind: Ingress
    name: podinfo
  # HPA reference (optional)
  autoscalerRef:
    apiVersion: autoscaling/v2
    kind: HorizontalPodAutoscaler
    name: podinfo
  # the maximum time in seconds for the canary deployment
  # to make progress before it is rollback (default 600s)
  progressDeadlineSeconds: 60
  service:
    # ClusterIP port number
    port: 80
    # container port number or name
    targetPort: 9898
  analysis:
    # schedule interval (default 60s)
    interval: 10s
    # max number of failed metric checks before rollback
    threshold: 10
    # max traffic percentage routed to canary
    # percentage (0-100)
    maxWeight: 50
    # canary increment step
    # percentage (0-100)
    stepWeight: 5
    # Skipper Prometheus checks
    metrics:
    - name: request-success-rate
      interval: 1m
      # minimum req success rate (non 5xx responses)
      # percentage (0-100)
      thresholdRange:
        min: 99
    - name: request-duration
      interval: 1m
      # maximum req duration P99
      # milliseconds
      thresholdRange:
        max: 500
    webhooks:
      - name: gate
        type: confirm-rollout
        url: http://flagger-loadtester.test/gate/approve
      - name: acceptance-test
        type: pre-rollout
        url: http://flagger-loadtester.test/
        timeout: 10s
        metadata:
          type: bash
          cmd: "curl -sd 'test' http://podinfo-canary/token | grep token"
      - name: load-test
        type: rollout
        url: http://flagger-loadtester.test/
        timeout: 5s
        metadata:
          type: cmd
          cmd: "hey -z 10m -q 10 -c 2 -host app.example.com http://skipper-ingress.kube-system"
          logCmdOutput: "true"
```

Save the above resource as podinfo-canary.yaml and then apply it:

```bash
kubectl apply -f ./podinfo-canary.yaml
```

After a couple of seconds Flagger will create the canary objects:

```bash
# applied 
deployment.apps/podinfo
horizontalpodautoscaler.autoscaling/podinfo
ingress.networking.k8s.io/podinfo-ingress
canary.flagger.app/podinfo

# generated 
deployment.apps/podinfo-primary
horizontalpodautoscaler.autoscaling/podinfo-primary
service/podinfo
service/podinfo-canary
service/podinfo-primary
ingress.networking.k8s.io/podinfo-canary
```

## Automated canary promotion

Flagger implements a control loop that gradually shifts traffic to the canary while measuring
key performance indicators like HTTP requests success rate, requests average duration and pod health.
Based on analysis of the KPIs a canary is promoted or aborted, and the analysis result is published to Slack or MS Teams.

![Flagger Canary Stages](https://raw.githubusercontent.com/fluxcd/flagger/main/docs/diagrams/flagger-canary-steps.png)

Trigger a canary deployment by updating the container image:

```bash
kubectl -n test set image deployment/podinfo \
podinfod=stefanprodan/podinfo:4.0.6
```

Flagger detects that the deployment revision changed and starts a new rollout:

```text
kubectl -n test describe canary/podinfo

Status:
  Canary Weight:         0
  Failed Checks:         0
  Phase:                 Succeeded
Events:
 New revision detected! Scaling up podinfo.test
 Waiting for podinfo.test rollout to finish: 0 of 1 updated replicas are available
 Pre-rollout check acceptance-test passed
 Advance podinfo.test canary weight 5
 Advance podinfo.test canary weight 10
 Advance podinfo.test canary weight 15
 Advance podinfo.test canary weight 20
 Advance podinfo.test canary weight 25
 Advance podinfo.test canary weight 30
 Advance podinfo.test canary weight 35
 Advance podinfo.test canary weight 40
 Advance podinfo.test canary weight 45
 Advance podinfo.test canary weight 50
 Copying podinfo.test template spec to podinfo-primary.test
 Waiting for podinfo-primary.test rollout to finish: 1 of 2 updated replicas are available
 Routing all traffic to primary
 Promotion completed! Scaling down podinfo.test
```

**Note** that if you apply new changes to the deployment during the canary analysis, Flagger will restart the analysis.

You can monitor all canaries with:

```bash
watch kubectl get canaries --all-namespaces

NAMESPACE   NAME        STATUS        WEIGHT   LASTTRANSITIONTIME
test        podinfo-2   Progressing   30       2020-08-14T12:32:12Z
test        podinfo     Succeeded     0        2020-08-14T11:23:88Z
```

## Automated rollback

During the canary analysis you can generate HTTP 500 errors to test if Flagger pauses and rolls back the faulted version.

Trigger another canary deployment:

```bash
kubectl -n test set image deployment/podinfo \
podinfod=stefanprodan/podinfo:4.0.6
```

Exec into the load tester pod with:

```bash
kubectl -n test exec -it deploy/flagger-loadtester bash
```

Generate HTTP 500 errors:

```bash
hey -z 1m -c 5 -q 5 http://app.example.com/status/500
```

Generate latency:

```bash
watch -n 1 curl http://app.example.com/delay/1
```

When the number of failed checks reaches the canary analysis threshold, the traffic is routed back to the primary,
the canary is scaled to zero and the rollout is marked as failed.

```text
kubectl -n flagger-system logs deploy/flagger -f | jq .msg

New revision detected! Scaling up podinfo.test
Canary deployment podinfo.test not ready: waiting for rollout to finish: 0 of 1 updated replicas are available
Starting canary analysis for podinfo.test
Pre-rollout check acceptance-test passed
Advance podinfo.test canary weight 5
Advance podinfo.test canary weight 10
Advance podinfo.test canary weight 15
Advance podinfo.test canary weight 20
Halt podinfo.test advancement success rate 53.42% < 99%
Halt podinfo.test advancement success rate 53.19% < 99%
Halt podinfo.test advancement success rate 48.05% < 99%
Rolling back podinfo.test failed checks threshold reached 3
Canary failed! Scaling down podinfo.test
```

## Custom metrics

The canary analysis can be extended with Prometheus queries.

Create a metric template and apply it on the cluster:

```yaml
apiVersion: flagger.app/v1beta1
kind: MetricTemplate
metadata:
  name: latency
  namespace: test
spec:
  provider:
    type: prometheus
    address: http://flagger-prometheus.flagger-system:9090
  query: |
    histogram_quantile(0.99,
      sum(
        rate(
          skipper_serve_route_duration_seconds_bucket{
            route=~"{{ printf "kube(ew)?_%s__%s_canary__.*__%s_canary(_[0-9]+)?" namespace ingress service }}",
            le="+Inf"
          }[1m]
        )
      ) by (le)
    )
```

Edit the canary analysis and add the latency check:

```yaml
  analysis:
    metrics:
    - name: "latency"
      templateRef:
        name: latency
      thresholdRange:
        max: 0.5
      interval: 1m
```

The threshold is set to 500ms so if the average request duration in the last minute goes over half a second
then the analysis will fail and the canary will not be promoted.

Trigger a canary deployment by updating the container image:

```bash
kubectl -n test set image deployment/podinfo \
podinfod=stefanprodan/podinfo:4.0.6
```

Generate high response latency:

```bash
watch curl http://app.example.com/delay/2
```

Watch Flagger logs:

```text
kubectl -n flagger-system logs deployment/flagger -f | jq .msg

Starting canary deployment for podinfo.test
Advance podinfo.test canary weight 5
Advance podinfo.test canary weight 10
Advance podinfo.test canary weight 15
Halt podinfo.test advancement latency 1.20 > 0.5
Halt podinfo.test advancement latency 1.45 > 0.5
Halt podinfo.test advancement latency 1.60 > 0.5
Halt podinfo.test advancement latency 1.69 > 0.5
Halt podinfo.test advancement latency 1.70 > 0.5
Rolling back podinfo.test failed checks threshold reached 5
Canary failed! Scaling down podinfo.test
```

If you have alerting configured, Flagger will send a notification with the reason why the canary failed.