It deprecates ExpectedException and Assert.assertThat(T, org.hamcrest.Matcher).
Without Java 8 we don't want to migrate away from ExpectedException at
this time. We tend to prefer Truth over Hamcrest, so I swapped the one
instance of Assert.assertThat() to use Truth. With this change we get a
warning-less build with JUnit 4.13. We don't yet upgrade because we
still need to support JUnit 4.12 for some use-cases, but will be able to
upgrade to 4.13 soon when they upgrade.
verifyZeroInteractions has the same behavior as verifyNoMoreInteractions. It
was deprecated in Mockito 3.0.1 and replaced with verifyNoInteractions, which
does not change behavior depending on previous verify() calls. All instances
were replaced with verifyNoInteractions, except those in
ApplicationThreadDeframerTest which were replaced with verifyNoMoreInteractions
since there is a verify() call in `@Before`.
This provides a substantial ~3x performance increase to Netty async
streaming with small messages. It also increases OkHttp performance for
the same benchmark 40% and decreases unary latency by 3µs for Netty and
10µs for OkHttp.
We avoid calling listener after closure because the Executor used for
RPC callbacks may no longer be available. This issue was already
present in the ApplicationThreadDeframer, but full-stream compression is
not really deployed so was unnoticed.
DirectExecutor saw a 5-6µs latency increase via MigratingDeframer.
DirectExecutor usages should see no benefit from MigratingDeframer, so
disable it in that case.
* Revert "okhttp: revert changes for using new APIs to configure TLS in Android (#6959)"
This reverts commit ee8b395f79.
Roll forward with adding manual check if hostname contains underscore, as Android's URI implementation allows underscore in hostsname.
* Revert "okhttp: Skip enabling SNI and session ticket for fake/test host names (#6949)"
This reverts commit eb8e31409e.
* Revert "okhttp: use new APIs for configuring TLS whenever possible (Android Q+) (#6912)"
This reverts commit 5803dfd9dc.
Use new APIs for configuring TLS in Android environment. Starting from Android 29, there is a new set of public APIs for configuring ALPN (and starting from Android 24, there is API for enabling SNI). This change migrates to use these new APIs whenever possible. Only fallback to call the old hidden APIs if new ones do not exist (or do not work).
Specifically, this addresses bugs that occur when the `OkHttpChannelBuilder.flowControlWindow(int)` setting is increased from its default value.
Two changes:
1. On starting a connection, ensure the value of `OkHttpChannelBuilder.flowControlWindow(int)` is sent via Settings.INITIAL_WINDOW_SIZE. Also send a WINDOW_UPDATE after Settings to update the connection-level window.
2. Always initialize the `OutboundFlowController` with an initialWindowSize of 65335 bytes per the [http2 spec](https://http2.github.io/http2-spec/#InitialWindowSize) instead of using the inbound window size.
Fixes#6685
This change adds two booleans to the ChannelBuilders to
allow transports to use get and put. These are currently defaulted to
on, but unset on the method descriptors. This change is 1/2 that will
allow the safe / idempotent bits to be set on generated proto code.
Part 2/2 will actually enable it.
The use case for this is for interceptors that implement caching logic.
They need to be able to access the safe/idempotent bits on the MD in
order to decide to how to handle the request, even if gRPC doesn't use
GET / PUT HTTP methods.
* okhttp: add PerfMark tracing for okhttp transport
* change task for AsyncSink to give more accurate task description
* add final to field tag
* add PerfMark dependency in okhttp package bazel
The former is deprecated and replaced by the latter in Mockito 2.
However, there is a functional difference: ArgumentMatchers will reject
`null` and check the type if the matcher specified a type (e.g.
`any(Class)` or `anyInt()`). `any()` will remain to accept anything.
As mentioned in 5188[1], the default used with the enableKeepAlive API
conflicted with the default server enforcement. Instead of fixing it,
remove it. These APIs were deprecated in v1.3.0 in April 2017.
1. https://github.com/grpc/grpc-java/issues/5188#issuecomment-482269303
* okhttp: add verbose logging for OkHttp HTTP/2 frames to include brief frame content.
* fix small details and typo issues
* fix branch condition (it's a typo) for logging the whole buffer
* remove redudent log level checking, always not log entire buffer
* convert ByteString to String to avoid printing 'hex=' prefix
* add test for OkHttpFrameLogger for inbound http frames
* refactor OkHttpFrameLogger's help method
* add Constructor for testing and missing logHeaders
* add http/2 framelogger test for outbound side
* use ArgumentMatchers instead of Matchers
* replace assertTrue with Truth.assertThat
* assert buffer log with exact length match instead of <=
This is needed for GRPCLB pick_first support, which needs to attach
tokens to headers, and the tokens are per server. In pick_first, all
addresses are in a single Subchannel, thus the LoadBalancer needs to
know which backend is used for a new stream.
This will be a new override. The old override is now deprecated.
In order to pass new information without adding new overrides, I shoved most information
into an object called StreamInfo. The Metadata is left out to draw attention because
it's mutable.
Motivation: this is needed for correctly supporting pick_first in GRPCLB. GRPCLB needs to
add a token to the headers, and the token varies among servers. With round_robin, GRPCLB
create a Subchannel for each server, thus can attach the token when the Subchannel is picked.
To implement pick_first, all server addresses will be put in a single Subchannel, we will
need to add the header in newClientStreamTracer(), by looking up the server address from
the transport attributes and deciding which token to add.
Context: [#4159 (comment)](https://github.com/grpc/grpc-java/issues/4159#issuecomment-415827641)
`Attributes` is appropriate for plumbing optional objects, especially useful for a long plumbing path where components in the middle may not care or see all objects in the container. It's not the case for the `params` on `newNewResolver()`. Both the default port and the proxy detector are guaranteed to be there and the plumbing path is very short. In this case, a first-class object is more appropriate and easier to use.
The `Helper` will also have `getSynchronizationContext()` (#2649) and a method to parse and validate service config. We we also considering merging `Listener` into the `Helper`, to make `NameResolver` match the `LoadBalancer` API.
Combine the public `ProxyParameters` and the internal `ProxySocketAddress` as `HttpConnectProxiedSocketAddress`. The more specific name signifies the type of the proxy we currently support, and makes room for other proxy types (e.g., SOCKS) in the future. The combination simplifies NameResolver implementation.
Introduce `ProxiedSocketAddress` as the base class that is returned by `ProxyDetector`, mainly for clarification and documentation. Added documentation about proxy in general on `ProxyDetector`.
This will reduce the method count, as okhttp's copy of ConnectionSpec will no
longer be retained when ProGuarded. It was deprecated in 25f357699, 10 months
ago.
We've been on newer versions of Guava for a while now; these no longer
do anything.
Reworded the comment for Stopwatch.createUnstarted(), because it is not
safe (it doesn't matter if the method isn't marked Beta; you have to use
Ticker), except for the fact it is only used in our tests.
Optimize OkHttp transport's memory use by getting rid of queuing writes in
AsyncFrameWriter. If any write is pending due to connection issue or by flow
control, AsyncFrameWriter can use at least 8K per each task (task includes
buffer) even if the actual payload is very small. To merge pending writes,
Async mechanism is moved from AsyncFrameWriter to AsyncSink (AsyncSink
is used by okio's FrameWriter). AsyncSink is still relying on okio's buffer to
decide merging writes or not.
Resolves#4860
Following the [spec](https://github.com/grpc/grpc/blob/master/doc/PROTOCOL-HTTP2.md) on duplicate header names:
**Custom-Metadata** header order is not guaranteed to be preserved except for values with duplicate header names. Duplicate header names may have their values joined with "," as the delimiter and be considered semantically equivalent. Implementations must split Binary-Headers on "," before decoding the Base64-encoded values.
This will allow enabling Error Prone on JDK 10+ (after
updating the net.ltgt.errorprone plugin), and is also a
prerequisite to that plugin update.
Also remove net.ltgt.apt plugin, as Gradle has native
support for annotationProcessor.
This is a rename of the pre-existing Netty builder method, so aliases
were added to the Netty builders.
Fixes#4050. This API was a minor rename to the pre-existing Netty API,
so has already undergone API review and thus is not ExperimentalApi.
Returns a Channel that allows a LoadBalancer to make auxiliary RPCs on already-established application connections. We need this to implement client-side health-checking (#4932)
See comments on the API for its semantics.
Notable changes:
- Transports are modified to use InUseStateAggregator so that they can exclude RPCs made on Subchannel.asChannel() when reporting in-use state for idle mode.
- OobChannel shares the same Executor as Subchannel.asChannel(). Because the latter is not a ManagedChannel and doesn't have life-cycle, thus can't determine when to return the Executor to a pool, the Executor is now returned only when ManagedChannelImpl is terminated.
This is the first step of smoothly changing the CallCredentials API.
Security level and authority are parameters required to be passed to
applyRequestMetadata(). This change wraps them, along with
MethodDescriptor and the transport attributes to RequestInfo, which is
more clear to the implementers.
ATTR_SECURITY_LEVEL is moved to the internal GrpcAttributes and
annotated as TransportAttr, because transports are required to set it,
but no user is actually reading them from
{Client,Server}Call.getAttributes().
ATTR_AUTHORITY is removed, because no transport is overriding it.
All involved interfaces are changed to abstract classes, as this will
make further API changes smoother.
The CallCredentials name is stabilized, thus we first introduce
CallCredentials2, ask CallCredentials implementations to migrate to
it, while GRPC accepting both at the same time, then replace
CallCredentials with CallCredentials2.
It appears to be stable now. Ran for 1000s of times. I do see some
general flakiness in TransportTest, but it applies to the tests in
general and isn't specific to this one test. It is:
```
org.mockito.exceptions.verification.WantedButNotInvoked:
Wanted but not invoked:
listener.transportReady();
-> at io.grpc.internal.testing.AbstractTransportTest.startTransport(AbstractTransportTest.java:1815)
Actually, there were zero interactions with this mock.
```
This flake is not seen often because it occurs less frequently when
running all the tests (~.1% vs 1%). One of the early tests must warm
something up to make it less likely.
This is an API used to coordinate across packages and must live in
`io.grpc`.
Prepending `Internal` makes it easier to detect and hide this class
from public visibility when using certain build tools.
fixes#4796
Most of the changes are changing the signature of newClientTransport.
Since this is annoying, I choose to introduce a ClientTransportOptions
object to avoid the churn in the future.
With ClientTransportOptions in place, there's only a few lines necessary
of plumbing for the Attributes: add the field to ClientTransportOptions
and populate it in InternalSubchannel. There are no consumers of the
field in this commit.
A new RPC starts with the following steps:
1. Pick a READY transport
2. the READY transport calls `transport.newStream()`
3. the new stream calls `stream.start()`
4. `stream.start()` invokes or enqueus `writeHeaders()` (or for GET request, noop)
A racy GOAWAY could happen between 3 and 4, and by the retry spec, the RPC should be transparent-retry-able in this case. For Netty and OkHttp transport implementation, before step 4, (even if step 1, 2, and 3 excluding 4 are made atomic,) the http2-stream for the RPC is not created, so the current transparent retry logic does not apply and need fix.
Of course, if step 1, 2, and 3 including 4 are made atomic, and not with GET, there will be no such problem.
This allows ProGuard to remove OkHttp's ConnectionSpec in most cases,
saving about 40 methods. The savings won't be realized until
DEFAULT_CONNECTION_SPEC is removed.
Always set the remote address, no reason why this should be a TLS-only
feature. This is needed for channelz, and is especially useful in unit
tests where we are using plaintext.
This PR adds the attr for plaintext.
Changes:
- `ClientStreamListener.onClose(Status status, RpcProgress rpcProgress, Metadata trailers)` added.
- `AbstractClientStream.transportReportStatus(Status status, RpcProgress rpcProgress, boolean stopDelivery, Metadata trailers)` added
- `ClientCallImpl.ClientStreamListenerImpl` will ignore the arg `rpcProgress` (non retry)
- `RetriableStream.SubListener` will handle `rpcProgress` and decide if transparent retry.
- `NettyClientHandler` and `OkHttpClientTransport` will pass `RpcProgress.REFUSED` to client stream listener for later stream ids when received GOAWAY, or for stream received a RST_STREAM frame with REFUSED code.
- All other files are just a result of refactoring.
ProxyDetector is now responsible for resolving the proxy's
`InetSocketAddress`, and `ProxyParameters` asserts that the address is
resolved. The results are plumbed through using a `PairSocketAddress`,
which is a special `SocketAddress`.
If a proxy should be used but the proxy can not be resolved, we the
`DnsNameResolver` will re-attempt the resolution later.
Remove the unit test testing for unresolved proxy addresses, since
it's no longer applicable.
Eric Anderson
Sergii Tkachenko
Jihun Cho
Chengyuan Zhang
chrisschek
sanjaypujare
Tomo Suzuki
Graeme Morgan
ZHANG Dapeng
Carl Mastrangelo
Ran
Carl Mastrangelo
康智冬
Dharmesh Jogadia
Tim van der Lippe
Tim van der Lippe
Carl Mastrangelo
Kun Zhang
Eric Gribkoff
Ignacio del Valle Alles
Thomas Broyer
zpencer
David Brodsky