Reverted the actual mirror test script, because mirror test seems to have some subtle failure when running with what seems to be the exact same commands via snips. Will investigate further in followup PR. Merging this one to get the generator changes.
* Add test for Request Timeouts
* Update test to extract snippets
* Apply suggestions from code review
Co-Authored-By: Frank Budinsky <frankb@ca.ibm.com>
* Fix lint error
* Use code snippets from bookinfo snips
Co-Authored-By: Frank Budinsky <frankb@ca.ibm.com>
* Remove sleep pods
* remove deprecated $snippet and use use verify func
Co-Authored-By: Frank Budinsky <frankb@ca.ibm.com>
* Skip test failure
Co-authored-by: Frank Budinsky <frankb@ca.ibm.com>
The code in step 3 of Perform TLS origination with an egress gateway explains how to create egress Gateway for edition.cnn.com. port 80, so the title of this step should follow it.
Co-authored-by: Koki Tomoshige <36136133+tomocy@users.noreply.github.com>
* Retire helm documentation as we use a protobuf
The new rendered source of truth is:
https://preliminary.istio.io/docs/reference/config/istio.operator.v1alpha1/
This is rendered from the API repo protobuf which (may) need description fields
set. That protobuf is here:
https://github.com/istio/api/blob/master/operator/v1alpha1/operator.proto
* Follow the flowchart
The flowchart is not quite right and could use some improvement.
* Update content/en/blog/2019/performance-best-practices/index.md
Co-Authored-By: Frank Budinsky <frankb@ca.ibm.com>
Co-authored-by: Frank Budinsky <frankb@ca.ibm.com>
* Refactor Secure Ingress tasks
Ingress SDS is now the default and recommended. This removes the file
mount task, which is no longer recommended and will avoid confusion, and
cleans up the task a bit. I also documented the new supported secret
formats.
* use archive
* Add documentation on Ingress support
Istio has supported Ingress for quite a while, but its not documented.
This explains how to use it and configure it.
Note to docs reviewers: Gateway is Istio's alternative to Kubernetes'
Inrgess object, and we prefer users to use Gateway. However, for reasons
like legacy users, we also support Ingress.
* fix lint
* fix lint
* fix lint
* improvements
.
* Apply suggestions from code review
Co-Authored-By: Frank Budinsky <frankb@ca.ibm.com>
Co-authored-by: Frank Budinsky <frankb@ca.ibm.com>
* remove mixer references from egress tasks and deprecate where needed
* lint fixes
* Update content/en/docs/tasks/traffic-management/egress/egress_sni_monitoring_and_policies/index.md
Co-Authored-By: mandarjog <mandarjog@gmail.com>
* Update content/en/docs/tasks/traffic-management/egress/egress_sni_monitoring_and_policies/index.md
Co-Authored-By: Eric Van Norman <ericvn@us.ibm.com>
Co-authored-by: Francois Pesce <fpesce@google.com>
Co-authored-by: mandarjog <mandarjog@gmail.com>
Co-authored-by: Eric Van Norman <ericvn@us.ibm.com>
* rewrite Secure Gateways (SDS) to use openssl for generating certs/keys
additional improvements:
1. Generate and use client certificate/private key for mutual TLS
2. Do not use quotes in YAMLs where not required
* add removing csr files and client.example.com files
* delete the directories with the certificates -> delete the certificates and the keys
* update documentation for TCP traffic shifting: use a dedicated namespace instead of using default [istio-18285]
* fixed lint error in tcp-traffic-shifting/index.md in creating new namespace section (istio#18285)
* fix ordered list numbering to conform to MD029 configured to 'one' (istio.io/istio#18285)
* add "for" in description: ... configure Istio for Kubernetes External Services
* add "in the default namespace" to "create a Kubernetes ExternalName Service"
* mention the Kubernetes DNS format for services
* bugfix: V1/2_POD_IP set error when there are multiple pods labelled version=v1/2
* certificate decode error when decoding from bash pipe by openssl
* revert certificate decode error when decoding from bash pipe by openssl
These fix problems encountered when switching to the new Hugo which has
a completely different markdown engine. I went through diffs of the generated
HTML and made required adjustments.
- We don't need cookies for istio.io, the few settings we do have should be
managed with browser-local storage instead. This is a better privacy posture,
and avoids sending needless data to the server for every request.
* Add note about annotations to control traffic
Fixes https://github.com/istio/istio/issues/19258
* Update content/en/docs/tasks/traffic-management/egress/egress-control/index.md
Co-Authored-By: Martin Taillefer <geeknoid@users.noreply.github.com>
* use a subset in the destination rule for TLS origination
this way the TLS origination will only be applied for the traffic directed by the
virtual service for TLS origination. TLS origination will not be applied for the original TLS traffic
* add a check that the original TLS traffic works as before
* Added the Best Practices section with general principles.
This is the beginning of the new Best Practices section.
Our goal is to provide a section for all the best practices and recommendations
for Istio deployments. The best practices are based on the identified and
recommended deployment models.
Signed-off-by: rcaballeromx <grca@google.com>
* Change headings for clarity.
Adds clarity to some passages based on feedback.
Removes a list of recommendations that was causing some confusion.
Adds a glossary entry for failure domains and how they relate to a
platform's availability zones.
Signed-off-by: rcaballeromx <grca@google.com>
* Move Best Practices to Ops Guide
Signed-off-by: rcaballeromx <grca@google.com>
* Moved Deployment Best Practices to a new "Prepare Your Deployment" section.
Moved all deployment preparation content into a new section under "Setup".
For now the content includes the following sections:
- Deployment models
- Deployment best practices
- Pod requirements
Merged the two existing pages containing pod requirements into one single page.
Signed-off-by: rcaballeromx <grca@google.com>
* Replace example with better guidance around namespace tenancy.
Signed-off-by: Rigs Caballero <grca@google.com>
* Add links and language pointing to the Prepare section
Signed-off-by: Rigs Caballero <grca@google.com>
* Fix minor typos and broken links.
Signed-off-by: Rigs Caballero <grca@google.com>
* Move from Setup to Operations
Signed-off-by: Rigs Caballero <grca@google.com>
* Fix broken links
Signed-off-by: Rigs Caballero <grca@google.com>
* Fix rebasing issues.
Signed-off-by: Rigs Caballero <grca@google.com>
* Fix multicluster install link.
Signed-off-by: Rigs Caballero <grca@google.com>
- Fix a bunch of heading capitalization.
- Remove words that shouldn't be in the dictionary
and update the text accordingly.
- Added a few @@ sequences to reference content files from text blocks.
- Used a few {{< source_branch_name >}} sequences to refer to the proper
branch in GitHub rather than master.
* fix the certificate and private key generation for the first section
* rewrite the second section
* fix the third section
* fix the troubleshooting section
* remove a reference to generating certificates and keys in the ingress passthru task
* a certificates -> a certificate, Generate a certificate -> Create a certificate
* add a cleanup subsection to set desired outbound traffic policy mode
the title: "Set the `global.outboundTrafficPolicy.mode` to your desired mode"
* remove a redundant empty line
* rename the subsection to be "Set the outbound traffic policy mode to your desired value"
* remove a semicolon at the end of the subsection's title
* add `uniq` so the output of the current outbound traffic policy mode will appear once
* migrate Deployment apiVersion from extensions/v1beta1 to apps/v1 to support k8s 1.16
* migrate Deployment, PodSecurityPolicy apiVersion to support k8s 1.16
* add the first version of Egress with Kubernetes Services
* add explicit disabling of TLS in destination rules
* rewrite the motivation for Kubernetes service entries
motivation: location transparency
* remove pre-Istio from .spelling
* add "The external services are not part of an Istio service mesh..."
so they cannot perform the mutual TLS of Istio.
* split a long line
* expand the explanations about disabling Istio's mutual TLS
* add explanation about disabling TLS mode in the HTTP case
* add explanation about disabling Istio mutual TLS for HTTPS case
* unencoded -> unencrypted
* fix a link
* fix the location of the task to be in content/en
* Remove usages of curl inside istio-proxy
Distroless builds of Istio do not contain curl, so we should not tell
users to use it. Pilot-agent handles this functionality for us
* Fix lint error
* Mention mirror_percent field in mirroring task
* Apply suggestions from code review
Co-Authored-By: Adam Miller <1402860+adammil2000@users.noreply.github.com>
Frank Budinsky
Shamsher Ansari
Kenjiro Nakayama
Gregory Hanson
Jonh Wendell
Istio Automation
Steven Dake
John Howard
Jimmy Chen
Romain Lenglet
Vadim Eisenberg
Eric Van Norman
Bryant Hagadorn
Suchith J N
SerenaFeng
youmoo
Martin Taillefer
Xinnan Wen
Rigs Caballero
Hongzhi
Neeraj Poddar
Naoki Oketani
imgbot[bot]
Ryan Michela
LisaFC
Ed Snible
Phillip Quy Le
Adam Miller