diff --git a/config/v1alpha1/doc.go b/config/v1alpha1/doc.go
new file mode 100644
index 0000000..8c733a9
--- /dev/null
+++ b/config/v1alpha1/doc.go
@@ -0,0 +1,19 @@
+/*
+Copyright 2018 The Kubernetes Authors.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+*/
+
+// +k8s:deepcopy-gen=package
+// +groupName=kubeproxy.config.k8s.io
+package v1alpha1 // import "k8s.io/kube-proxy/config/v1alpha1"
diff --git a/config/v1alpha1/register.go b/config/v1alpha1/register.go
new file mode 100644
index 0000000..92d92c4
--- /dev/null
+++ b/config/v1alpha1/register.go
@@ -0,0 +1,49 @@
+/*
+Copyright 2018 The Kubernetes Authors.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+*/
+
+package v1alpha1
+
+import (
+	"k8s.io/apimachinery/pkg/runtime"
+	"k8s.io/apimachinery/pkg/runtime/schema"
+)
+
+// GroupName is the group name use in this package
+const GroupName = "kubeproxy.config.k8s.io"
+
+// SchemeGroupVersion is group version used to register these objects
+var SchemeGroupVersion = schema.GroupVersion{Group: GroupName, Version: "v1alpha1"}
+
+var (
+	// localSchemeBuilder and AddToScheme will stay in k8s.io/kubernetes.
+	SchemeBuilder      runtime.SchemeBuilder
+	localSchemeBuilder = &SchemeBuilder
+	AddToScheme        = localSchemeBuilder.AddToScheme
+)
+
+func init() {
+	// We only register manually written functions here. The registration of the
+	// generated functions takes place in the generated files. The separation
+	// makes the code compile even when the generated files are missing.
+	localSchemeBuilder.Register(addKnownTypes)
+}
+
+func addKnownTypes(scheme *runtime.Scheme) error {
+	scheme.AddKnownTypes(SchemeGroupVersion,
+		&KubeProxyConfiguration{},
+	)
+	return nil
+}
diff --git a/config/v1alpha1/types.go b/config/v1alpha1/types.go
new file mode 100644
index 0000000..b9c370b
--- /dev/null
+++ b/config/v1alpha1/types.go
@@ -0,0 +1,154 @@
+/*
+Copyright 2017 The Kubernetes Authors.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+*/
+
+package v1alpha1
+
+import (
+	apimachineryconfigv1alpha1 "k8s.io/apimachinery/pkg/apis/config/v1alpha1"
+	metav1 "k8s.io/apimachinery/pkg/apis/meta/v1"
+)
+
+// KubeProxyIPTablesConfiguration contains iptables-related configuration
+// details for the Kubernetes proxy server.
+type KubeProxyIPTablesConfiguration struct {
+	// masqueradeBit is the bit of the iptables fwmark space to use for SNAT if using
+	// the pure iptables proxy mode. Values must be within the range [0, 31].
+	MasqueradeBit *int32 `json:"masqueradeBit"`
+	// masqueradeAll tells kube-proxy to SNAT everything if using the pure iptables proxy mode.
+	MasqueradeAll bool `json:"masqueradeAll"`
+	// syncPeriod is the period that iptables rules are refreshed (e.g. '5s', '1m',
+	// '2h22m').  Must be greater than 0.
+	SyncPeriod metav1.Duration `json:"syncPeriod"`
+	// minSyncPeriod is the minimum period that iptables rules are refreshed (e.g. '5s', '1m',
+	// '2h22m').
+	MinSyncPeriod metav1.Duration `json:"minSyncPeriod"`
+}
+
+// KubeProxyIPVSConfiguration contains ipvs-related configuration
+// details for the Kubernetes proxy server.
+type KubeProxyIPVSConfiguration struct {
+	// syncPeriod is the period that ipvs rules are refreshed (e.g. '5s', '1m',
+	// '2h22m').  Must be greater than 0.
+	SyncPeriod metav1.Duration `json:"syncPeriod"`
+	// minSyncPeriod is the minimum period that ipvs rules are refreshed (e.g. '5s', '1m',
+	// '2h22m').
+	MinSyncPeriod metav1.Duration `json:"minSyncPeriod"`
+	// ipvs scheduler
+	Scheduler string `json:"scheduler"`
+	// excludeCIDRs is a list of CIDR's which the ipvs proxier should not touch
+	// when cleaning up ipvs services.
+	ExcludeCIDRs []string `json:"excludeCIDRs"`
+}
+
+// KubeProxyConntrackConfiguration contains conntrack settings for
+// the Kubernetes proxy server.
+type KubeProxyConntrackConfiguration struct {
+	// max is the maximum number of NAT connections to track (0 to
+	// leave as-is).  This takes precedence over maxPerCore and min.
+	Max *int32 `json:"max"`
+	// maxPerCore is the maximum number of NAT connections to track
+	// per CPU core (0 to leave the limit as-is and ignore min).
+	MaxPerCore *int32 `json:"maxPerCore"`
+	// min is the minimum value of connect-tracking records to allocate,
+	// regardless of conntrackMaxPerCore (set maxPerCore=0 to leave the limit as-is).
+	Min *int32 `json:"min"`
+	// tcpEstablishedTimeout is how long an idle TCP connection will be kept open
+	// (e.g. '2s').  Must be greater than 0 to set.
+	TCPEstablishedTimeout *metav1.Duration `json:"tcpEstablishedTimeout"`
+	// tcpCloseWaitTimeout is how long an idle conntrack entry
+	// in CLOSE_WAIT state will remain in the conntrack
+	// table. (e.g. '60s'). Must be greater than 0 to set.
+	TCPCloseWaitTimeout *metav1.Duration `json:"tcpCloseWaitTimeout"`
+}
+
+// +k8s:deepcopy-gen:interfaces=k8s.io/apimachinery/pkg/runtime.Object
+
+// KubeProxyConfiguration contains everything necessary to configure the
+// Kubernetes proxy server.
+type KubeProxyConfiguration struct {
+	metav1.TypeMeta `json:",inline"`
+
+	// featureGates is a map of feature names to bools that enable or disable alpha/experimental features.
+	FeatureGates map[string]bool `json:"featureGates,omitempty"`
+
+	// bindAddress is the IP address for the proxy server to serve on (set to 0.0.0.0
+	// for all interfaces)
+	BindAddress string `json:"bindAddress"`
+	// healthzBindAddress is the IP address and port for the health check server to serve on,
+	// defaulting to 0.0.0.0:10256
+	HealthzBindAddress string `json:"healthzBindAddress"`
+	// metricsBindAddress is the IP address and port for the metrics server to serve on,
+	// defaulting to 127.0.0.1:10249 (set to 0.0.0.0 for all interfaces)
+	MetricsBindAddress string `json:"metricsBindAddress"`
+	// enableProfiling enables profiling via web interface on /debug/pprof handler.
+	// Profiling handlers will be handled by metrics server.
+	EnableProfiling bool `json:"enableProfiling"`
+	// clusterCIDR is the CIDR range of the pods in the cluster. It is used to
+	// bridge traffic coming from outside of the cluster. If not provided,
+	// no off-cluster bridging will be performed.
+	ClusterCIDR string `json:"clusterCIDR"`
+	// hostnameOverride, if non-empty, will be used as the identity instead of the actual hostname.
+	HostnameOverride string `json:"hostnameOverride"`
+	// clientConnection specifies the kubeconfig file and client connection settings for the proxy
+	// server to use when communicating with the apiserver.
+	ClientConnection apimachineryconfigv1alpha1.ClientConnectionConfiguration `json:"clientConnection"`
+	// iptables contains iptables-related configuration options.
+	IPTables KubeProxyIPTablesConfiguration `json:"iptables"`
+	// ipvs contains ipvs-related configuration options.
+	IPVS KubeProxyIPVSConfiguration `json:"ipvs"`
+	// oomScoreAdj is the oom-score-adj value for kube-proxy process. Values must be within
+	// the range [-1000, 1000]
+	OOMScoreAdj *int32 `json:"oomScoreAdj"`
+	// mode specifies which proxy mode to use.
+	Mode ProxyMode `json:"mode"`
+	// portRange is the range of host ports (beginPort-endPort, inclusive) that may be consumed
+	// in order to proxy service traffic. If unspecified (0-0) then ports will be randomly chosen.
+	PortRange string `json:"portRange"`
+	// resourceContainer is the bsolute name of the resource-only container to create and run
+	// the Kube-proxy in (Default: /kube-proxy).
+	ResourceContainer string `json:"resourceContainer"`
+	// udpIdleTimeout is how long an idle UDP connection will be kept open (e.g. '250ms', '2s').
+	// Must be greater than 0. Only applicable for proxyMode=userspace.
+	UDPIdleTimeout metav1.Duration `json:"udpIdleTimeout"`
+	// conntrack contains conntrack-related configuration options.
+	Conntrack KubeProxyConntrackConfiguration `json:"conntrack"`
+	// configSyncPeriod is how often configuration from the apiserver is refreshed. Must be greater
+	// than 0.
+	ConfigSyncPeriod metav1.Duration `json:"configSyncPeriod"`
+	// nodePortAddresses is the --nodeport-addresses value for kube-proxy process. Values must be valid
+	// IP blocks. These values are as a parameter to select the interfaces where nodeport works.
+	// In case someone would like to expose a service on localhost for local visit and some other interfaces for
+	// particular purpose, a list of IP blocks would do that.
+	// If set it to "127.0.0.0/8", kube-proxy will only select the loopback interface for NodePort.
+	// If set it to a non-zero IP block, kube-proxy will filter that down to just the IPs that applied to the node.
+	// An empty string slice is meant to select all network interfaces.
+	NodePortAddresses []string `json:"nodePortAddresses"`
+}
+
+// Currently, three modes of proxy are available in Linux platform: 'userspace' (older, going to be EOL), 'iptables'
+// (newer, faster), 'ipvs'(newest, better in performance and scalability).
+//
+// Two modes of proxy are available in Windows platform: 'userspace'(older, stable) and 'kernelspace' (newer, faster).
+//
+// In Linux platform, if proxy mode is blank, use the best-available proxy (currently iptables, but may change in the
+// future). If the iptables proxy is selected, regardless of how, but the system's kernel or iptables versions are
+// insufficient, this always falls back to the userspace proxy. IPVS mode will be enabled when proxy mode is set to 'ipvs',
+// and the fall back path is firstly iptables and then userspace.
+
+// In Windows platform, if proxy mode is blank, use the best-available proxy (currently userspace, but may change in the
+// future). If winkernel proxy is selected, regardless of how, but the Windows kernel can't support this mode of proxy,
+// this always falls back to the userspace proxy.
+type ProxyMode string