diff --git a/content/zh-cn/blog/_posts/2022-09-14-pod-has-network-condition.md b/content/zh-cn/blog/_posts/2022-09-14-pod-has-network-condition.md
index e952d2b3d7..d1240fc122 100644
--- a/content/zh-cn/blog/_posts/2022-09-14-pod-has-network-condition.md
+++ b/content/zh-cn/blog/_posts/2022-09-14-pod-has-network-condition.md
@@ -6,7 +6,7 @@ slug: pod-has-network-condition
 ---
 <!--
 layout: blog
-title: 'Kubernetes 1.25: PodHasNetwork condition for pods'
+title: 'Kubernetes 1.25: PodHasNetwork Condition for Pods'
 date: 2022-09-14
 slug: pod-has-network-condition
 -->
@@ -26,7 +26,7 @@ state of a pod from the perspective of pod sandbox creation and network
 configuration by a container runtime (typically in coordination with CNI
 plugins). The kubelet starts to pull container images and start individual
 containers (including init containers) after the status of the `PodHasNetwork`
-condition is set to `True`. Metrics collection services that report latency of
+condition is set to `"True"`. Metrics collection services that report latency of
 pod initialization from a cluster infrastructural perspective (i.e. agnostic of
 per container characteristics like image size or payload) can utilize the
 `PodHasNetwork` condition to accurately generate Service Level Indicators
@@ -37,7 +37,7 @@ repeatedly fail to come up.
 Kubernetes 1.25 引入了对 kubelet 所管理的新的 Pod 状况 `PodHasNetwork` 的 Alpha 支持，
 该状况位于 Pod 的 status 字段中 。对于工作节点，kubelet 将使用 `PodHasNetwork` 状况从容器运行时
 （通常与 CNI 插件协作）创建 Pod 沙箱和网络配置的角度准确地了解 Pod 的初始化状态。
-在 `PodHasNetwork` 状况的 status 设置为 `True` 后，kubelet 开始拉取容器镜像并启动独立的容器
+在 `PodHasNetwork` 状况的 status 设置为 `"True"` 后，kubelet 开始拉取容器镜像并启动独立的容器
 （包括 Init 容器）。从集群基础设施的角度报告 Pod 初始化延迟的指标采集服务
 （无需知道每个容器的镜像大小或有效负载等特征）就可以利用 `PodHasNetwork`
 状况来准确生成服务水平指标（Service Level Indicator，SLI）。
@@ -55,31 +55,32 @@ the status field of a pod depending on the presence of init containers in a pod.
 
 <!--
 If a pod specifies init containers, the status of the `Initialized` condition in
-the pod status will not be set to `True` until all init containers for the pod
+the pod status will not be set to `"True"` until all init containers for the pod
 have succeeded. However, init containers, configured by users, may have errors
 (payload crashing, invalid image, etc) and the number of init containers
 configured in a pod may vary across different workloads. Therefore,
 cluster-wide, infrastructural SLIs around pod initialization cannot depend on
 the `Initialized` condition of pods.
 -->
-如果 Pod 指定了 Init 容器，则 Pod 状态中的 `Initialized` 状况的 status 将不会设置为 `True`，
+如果 Pod 指定了 Init 容器，则 Pod 状态中的 `Initialized` 状况的 status 将不会设置为 `"True"`，
 直到该 Pod 的所有 Init 容器都成功为止。但是，用户配置的 Init 容器可能会出现错误（有效负载崩溃、无效镜像等），
 并且 Pod 中配置的 Init 容器数量可能因工作负载不同而异。
 因此，关于 Pod 初始化的集群范围基础设施 SLI 不能依赖于 Pod 的 `Initialized` 状况。
 
 <!--
 If a pod does not specify init containers, the status of the `Initialized`
-condition in the pod status is set to `True` very early in the lifecycle of the
-pod. This occurs before the kubelet initiates any pod runtime sandbox creation
-and network configuration steps. As a result, a pod without init containers will
-report the status of the `Initialized` condition as `True` even if the container
-runtime is not able to successfully initialize the pod sandbox environment.
+condition in the pod status is set to `"True"` very early in the lifecycle of
+the pod. This occurs before the kubelet initiates any pod runtime sandbox
+creation and network configuration steps. As a result, a pod without init
+containers will report the status of the `Initialized` condition as `"True"`
+even if the container runtime is not able to successfully initialize the pod
+sandbox environment.
 -->
 如果 Pod 未指定 Init 容器，则在 Pod 生命周期的早期，
-Pod 状态中的 `Initialized` 状况的 status 会被设置为 `True`。
+Pod 状态中的 `Initialized` 状况的 status 会被设置为 `"True"`。
 这一设置发生在 kubelet 开始创建 Pod 运行时沙箱及配置网络之前。
 因此，即使容器运行时未能成功初始化 Pod 沙箱环境，没有 Init 容器的
-Pod 也会将 `Initialized` 状况的 status 报告为 `True`。
+Pod 也会将 `Initialized` 状况的 status 报告为 `"True"`。
 
 <!--
 Relative to either situation above, the `PodHasNetwork` condition surfaces more
@@ -91,14 +92,30 @@ containers (including init containers) in the pod.
 这样 kubelet 可以继续在 Pod 中启动用户配置的容器（包括 Init 容器）。
 
 <!--
-Note that a node agent may dynamically re-configure network interface(s) for a
-pod by watching changes in pod annotations that specify additional networking
+### Special Cases
+
+If a pod specifies `hostNetwork` as `"True"`, the `PodHasNetwork` condition is
+set to `"True"` based on successful creation of the pod sandbox while the
+network configuration state of the pod sandbox is ignored. This is because the
+CRI implementation typically skips any pod sandbox network configuration when
+`hostNetwork` is set to `"True"` for a pod.
+-->
+### 特殊场景
+
+如果一个 Pod 指定 `hostNetwork` 为 `"True"`，
+系统会根据 Pod 沙箱创建操作是否成功来决定要不要将 `PodHasNetwork` 状况设置为 `"True"`，
+设置此状况时会忽略 Pod 沙箱的网络配置状态。这是因为 Pod 的 `hostNetwork` 被设置为
+`"True"` 时 CRI 实现通常会跳过所有 Pod 沙箱网络配置。
+
+<!--
+A node agent may dynamically re-configure network interface(s) for a pod by
+watching changes in pod annotations that specify additional networking
 configuration (e.g. `k8s.v1.cni.cncf.io/networks`). Dynamic updates of pod
 networking configuration after the pod sandbox is initialized by Kubelet (in
 coordination with a container runtime) are not reflected by the `PodHasNetwork`
 condition.
 -->
-请注意，节点代理可以通过监视指定附加网络配置（例如 `k8s.v1.cni.cncf.io/networks`）的 Pod 注解变化，
+节点代理可以通过监视指定附加网络配置（例如 `k8s.v1.cni.cncf.io/networks`）的 Pod 注解变化，
 来动态地为 Pod 重新配置网络接口。Pod 沙箱被 Kubelet 初始化（结合容器运行时）之后
 Pod 网络配置的动态更新不反映在 `PodHasNetwork` 状况中。
 
@@ -110,14 +127,14 @@ field of a pod, please enable the `PodHasNetworkCondition` feature gate on the
 kubelet.
 
 For a pod whose runtime sandbox has been successfully created and has networking
-configured, the kubelet will report the `PodHasNetwork` condition with status set to `True`:
+configured, the kubelet will report the `PodHasNetwork` condition with status set to `"True"`:
 -->
 ### 试用 Pod 的 `PodHasNetwork` 状况
 
 为了让 kubelet 在 Pod 的 status 字段中报告 `PodHasNetwork` 状况，需在 kubelet 上启用
 `PodHasNetworkCondition` 特性门控。
 
-对于已成功创建运行时沙箱并已配置网络的 Pod，在 status 设置为 `True` 后，
+对于已成功创建运行时沙箱并已配置网络的 Pod，在 status 设置为 `"True"` 后，
 kubelet 将报告 `PodHasNetwork` 状况：
 
 ```
@@ -137,9 +154,9 @@ Conditions:
 <!--
 For a pod whose runtime sandbox has not been created yet (and networking not
 configured either), the kubelet will report the `PodHasNetwork` condition with
-status set to `False`:
+status set to `"False"`:
 -->
-对于尚未创建运行时沙箱（也未配置网络）的 Pod，在 status 设置为 `False` 后，
+对于尚未创建运行时沙箱（也未配置网络）的 Pod，在 status 设置为 `"False"` 后，
 kubelet 将报告 `PodHasNetwork` 状况：
 
 ```