* Remove instructions to copy Etcd CA key in HA
No need to copy etcd CA key when manually copying certs from first master node to nodes joining the control plane.
* ca.key still needed for stacked ETCD
Added note to quote/unquote the copying instructions depending on Etcd configuration
In doc of kubeadm installation, there are commands which wont work
without sudo regarding to Ubuntu/Debian instruction. However, other
docs related to kubeadm under
content/en/docs/setup/production-environment have commands with sudo.
This commit fixes this inconsistency.
* Change the full link in the document to an inline link.
grep -r "https \: \ / \ / kubernetes \ .io" content/en/docs
Changed to inline link except the following list.
- URLs are mentioned directly in the body
- release note
- url to blog
- url to community
- Url to be redirected
* Apply suggestions from code review
Co-Authored-By: June Yi <june.yi@samsung.com>
The former is the official spelling, but both spellings have been
used throughout the docs. This commit replaces the occurrences of
the unofficial spelling with the official one.
* Update patch release manager to patch release team in skew support policy.
* Adding link for additional patch-release information to version skew policy.
There are two fixes in this change. First, the yaml is left justified in order to ease copying. Secondly, the selector field is added to the deployment.
Update CRI-O links from Kubernetes incubator to the official CRI-O
homepage. Most links were already updated, but there were a few
stragglers in minikube documentation and old blog posts.
- Gardener is a fully managed service, including day-1 and day-2 operations
- Gardener supports OpenStack (and Packet Cloud), which is often the foundation for on-premise installations
See e.g. adopters like https://bnerd.com which are offering a Gardener-based fully managed Kubernetes service in their own OpenStack DCs. More information at https://github.com/gardener/gardener/blob/master/ADOPTERS.md.
* added step on pulling down sig-windows-tools to windows guide.
* First draft of KubeCluster.ps1 Windows setup instructions
* Update content/en/docs/setup/production-environment/windows/user-guide-windows-nodes.md
Co-Authored-By: Tim Bannister <tim@scalefactory.com>
* Update content/en/docs/setup/production-environment/windows/user-guide-windows-nodes.md
Co-Authored-By: Tim Bannister <tim@scalefactory.com>
* Update content/en/docs/setup/production-environment/windows/user-guide-windows-nodes.md
Co-Authored-By: Tim Bannister <tim@scalefactory.com>
* Update content/en/docs/setup/production-environment/windows/user-guide-windows-nodes.md
Co-Authored-By: Tim Bannister <tim@scalefactory.com>
* Update content/en/docs/setup/production-environment/windows/user-guide-windows-nodes.md
Co-Authored-By: Tim Bannister <tim@scalefactory.com>
* Update content/en/docs/setup/production-environment/windows/user-guide-windows-nodes.md
Co-Authored-By: Tim Bannister <tim@scalefactory.com>
* Update content/en/docs/setup/production-environment/windows/user-guide-windows-nodes.md
Co-Authored-By: Tim Bannister <tim@scalefactory.com>
* Update content/en/docs/setup/production-environment/windows/user-guide-windows-nodes.md
Co-Authored-By: Tim Bannister <tim@scalefactory.com>
* Update content/en/docs/setup/production-environment/windows/user-guide-windows-nodes.md
Co-Authored-By: Tim Bannister <tim@scalefactory.com>
* added pre-reqs for overlay and moved troubleshooting section
* cosmetic changes and updated kubecluster.ps1 .gifs
* updated deployment steps and networking fix-ups in the Windows user guide
- minor fix for control-plane-flags
- cleanup tables from "kubeadm maturity" in create-cluster
- update install guide for container linux guide in install-kubeadm
- minor fixes in self-hosting
Recently, the RunAsUserName feature has been added, allowing users to
run Windows containers with custom usernames, different from the image
default usernames.
Adds documentation regarding its prerequisites, feature gate, usage,
restrictions, and samples.
* porting some information from kubeadm-init.md to kubelet-integration.md doc
from reference/setup-tools/kubeadm/kubeadm-init.md to setup/production-environment/tools/kubeadm/kubelet-integration.md
includes edits I just proposed in #15421 and #80136
* improve wording re. systemd in kubelet-integration.md
* removing quotes and adding the in kubelet-integration.md
* Update content/en/docs/setup/production-environment/tools/kubeadm/kubelet-integration.md
Co-Authored-By: Lubomir I. Ivanov <neolit123@gmail.com>
* Added Tencent Cloud Production Environment Solution
* Add an article on how to run kubernetes on Tencent Kubernetes Engine : content/en/docs/setup/production-environment/turnkey/tke.md
* Document modifications have been made as recommended by reviewer sftim. Please select this document when merging.
* Document optimization
* Modify the contents of the document : content/en/docs/setup/production-environment/turnkey/tke.md
* Add A What's Next section
* Add content: TKE is a Certified Kubernetes product.
* Add reviewers and other information.
* Delete a space
* Change information about reviewers
* Remove reviewers.
* pod-network to be done only on master node
added a note saying that Install a pod-network add on need to be done only on the master node
* updated where to run pod-network doc
The addition of the flag "---control-plane-endpoint" for
"kubeadm init" removes the requirement for creating a config file
for the stacked etcd setup.
The config is still required for stacked etcd setup.
This change is required since the 3.8 manifest moves to using
apps/v1 instead of extensions/v1beta1 for types like DaemonSet
and Deployment.
See PR 70672 of k/k.
* Added listing for AWS VPC CNI
Added listing for AWS VPC CNI under "How to implement the Kubernetes networking model".
* Added AWS VPC CNI
* Added AWS VPC CNI to Installing a pod network add-on
* Updated tabs to alphabetical order
* Improve Pivotal row in Production Setup table.
- Provider column should contain company name
- Change check marks to product links to match other rows
Co-authored-by: Danny Berger <dberger@pivotal.io>
* Spell out PKS abbreviation.
Co-authored-by: Danny Berger <dberger@pivotal.io>
The current content was not following the style guide and lacked information on what the user was doing under the quick start section. Added more information and tested the section out. Further reorganized the content.
Correct typos
Updated the content.
Updated the content
Fixed syntax error.
Update the unordered list formatting
Fix formatting issues
Formatting update
Format the content
Format the content
Format content
Format ordered content
Format unordered list
Clean up and reorganize minikube.md
Updated the content
Updated the content as per the comments received.
Fixed an error
Fixes the note shortcode
Fixes error in shortcode
Clean up and reorganize minikube.md
* Correcting minikube quickstart steps
In minikube quickstart section , it was difficult to differentiate between command and its output. Also, There was no details given for each steps and its expected output. This PR fixes these issues.
* Correcting number formatting
Correcting number formatting
* Correcting numbering
Correcting numbering
* Update content/en/docs/setup/minikube.md
Co-Authored-By: Franklin Yu <franklinyu@hotmail.com>
* Update content/en/docs/setup/minikube.md
Co-Authored-By: Franklin Yu <franklinyu@hotmail.com>
* Update content/en/docs/setup/minikube.md
Co-Authored-By: Franklin Yu <franklinyu@hotmail.com>
* Corrected formatting
Corrected formatting
* Correcting number sequence
Correcting number sequence
* updated self-hosting documentation
* removed more referances
* updated wording
* updated self-hosting warning to be more clear about the effects of pivot has on your cluster
* Update content/en/docs/setup/independent/self-hosting.md
Co-Authored-By: Klaven <mcounts@suse.com>
When using udp backend, flannel uses UDP port 8285 for sending encapsulated packets.
When using vxlan backend, kernel uses UDP port 8472 for sending encapsulated packets.
Make sure that your firewall rules allow this traffic for all hosts participating in the overlay network.
This patch adds a entry in the kubeadm troubleshooting guide
about a problem that was found some time ago related to
kube-proxy DaemonSets and worker nodes in a CP setup.
* Official documentation on Poseidon/Firmament, a new multi-scheduler support for K8S. (#11752)
* Added documentation about Poseidon-Firmament scheduler
* Fixed some style issues.
* Udpated the document as per the review comments.
* Fixed some typos and updated the document
* Updated the document as per the review comments.
* Document timeout attribute for kms-plugin. (#12158)
See 72540.
* Official documentation on Poseidon/Firmament, a new multi-scheduler (#12343)
* Removed the old version of the Poseidon documentation. Incorrect location.
* Official documentation on Poseidon/Firmament, a new multi-scheduler support for K8S (#12069)
* Official documentation on Poseidon/Firmament, a new multi-scheduler support for K8S. (#11752)
* Added documentation about Poseidon-Firmament scheduler
* Fixed some style issues.
* Udpated the document as per the review comments.
* Fixed some typos and updated the document
* Updated the document as per the review comments.
* Updated the document as per review comments. Added config details.
* Updated the document as per the latest review comments. Fixed nits
* Made changes as per latest suggestions.
* Some more changes added.
* Updated as per suggestions.
* Changed the release process section.
* SIG Docs edits
Small edits to match style guidelines.
* add plus to feature state
* capitalization
* revert feature state shortcode
since this is a Kubernetes extension, not a direct feature, it shouldn't use the regular feature state tagging.
(cherry picked from commit 7730c1540b)
* Remove initializers from doc. It will be removed in 1.14 (#12331)
* kubeadm: Document CRI auto detection functionality (#12462)
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
* Minor doc change for GAing Pod DNS Config (#12514)
* Graduate ExpandInUsePersistentVolumes feature to beta (#10574)
* Rename 2018-11-07-grpc-load-balancing-with-linkerd.md.md file (#12594)
* Add dynamic percentage of node scoring to user docs (#12235)
* Add dynamic percentage of node scoring to user docs
* addressed review comments
* delete special symbol (#12445)
* Update documentation for VolumeSubpathEnvExpansion (#11843)
* Update documentation for VolumeSubpathEnvExpansion
* Address comments - improve descriptions
* Graduate Pod Priority and Preemption to GA (#12428)
* Added Instana links to the documentation (#12977)
* Added link to the Instana Kubernetes integration
* Added Instana link for services section
Added Instana and a link to the Kubernetes integration to the analytics services section and broadened the scope to APM, monitoring and analytics.
* Oxford comma /flex
* More Oxford commas, because they matter
* Update kubectl plugins to stable (#12847)
* documentation for CSI topology beta (#12889)
* Document changes to default RBAC discovery ClusterRole(Binding)s (#12888)
* Document changes to default RBAC discovery ClusterRole(Binding)s
Documentation for https://github.com/kubernetes/enhancements/issues/789 and https://github.com/kubernetes/kubernetes/pull/73807
* documentation review feedback
* CSI raw block to beta (#12931)
* Change incorrect string raw to block (#12926)
Fixes#12925
* Update documentation on node OS/arch labels (#12976)
These labels have been promoted to GA:
https://github.com/kubernetes/enhancements/issues/793
* local pv GA doc updates (#12915)
* Publish CRD OpenAPI Documentation (#12910)
* add documentation for CustomResourcePublishOpenAPI
* address comments
fix links, ordered lists, style and typo
* kubeadm: add document for upgrading from 1.13 to 1.14 (single CP and HA) (#13189)
* kubeadm: add document for upgrading from 1.13 to 1.14
- remove doc for upgrading 1.10 -> 1.11
* kubeadm: apply amends to upgrade-1.14 doc
* kubeadm: apply amends to upgrade-1.14 doc (part2)
* kubeadm: apply amends to upgrade-1.14 doc (part3)
* kubeadm: add note about "upgrade node experimental-control-plane"
+ add comment about `upgrade plan`
* kubeadm: add missing "You should see output similar to this"
* fix bullet indentation (#13214)
* mark PodReadinessGate GA (#12800)
* Update RuntimeClass documentation for beta (#13043)
* Update RuntimeClass documentation for beta
* Update feature gate & add upgrade section
* formatting fixes
* Highlight upgrade action required
* Address feedback
* CSI ephemeral volume alpha documentation (#10934)
* update kubectl documentation (#12867)
* update kubectl documentation
* add document for Secret/ConfigMap generators
* replace `kubectl create -f` by `kubectl apply -f`
* Add page for kustomization support in kubectl
* fix spelling errors and address comments
* Documentation for Windows GMSA feature (#12936)
* Documentation for Windows GMSA feature
Signed-off-by: Deep Debroy <ddebroy@docker.com>
* Enhancements to GMSA docs
Signed-off-by: Deep Debroy <ddebroy@docker.com>
* Fix links
Signed-off-by: Deep Debroy <ddebroy@docker.com>
* Fix GMSA link
Signed-off-by: Deep Debroy <ddebroy@docker.com>
* Add GMSA feature flag in feature flag list
Signed-off-by: Deep Debroy <ddebroy@docker.com>
* Relocate GMSA to container configuration
Signed-off-by: Deep Debroy <ddebroy@docker.com>
* Add example for container spec
Signed-off-by: Deep Debroy <ddebroy@docker.com>
* Remove changes in Windows index
Signed-off-by: Deep Debroy <ddebroy@docker.com>
* Update configure-gmsa.md
* Update configure-gmsa.md
* Update configure-gmsa.md
* Update configure-gmsa.md
* Rearrange the steps into two sections and other edits
Signed-off-by: Deep Debroy <ddebroy@docker.com>
* Fix links
Signed-off-by: Deep Debroy <ddebroy@docker.com>
* Add reference to script to generate GMSA YAMLs
Signed-off-by: Deep Debroy <ddebroy@docker.com>
* Some more clarifications for GMSA
Signed-off-by: Deep Debroy <ddebroy@docker.com>
* HugePages graduated to GA (#13004)
* HugePages graduated to GA
* fixing nit for build
* Docs for node PID limiting (https://github.com/kubernetes/kubernetes/pull/73651) (#12932)
* kubeadm: update the reference documentation for 1.14 (#12911)
* kubeadm: update list of generated files for 1.14
NOTE: PLACEHOLDERS! these files are generated by SIG Docs each
release, but we need them to pass the k/website PR CI.
- add join_phase* (new sub phases of join)
- add init_phase_upload-certs.md (new upload certs phase for init)
- remove alpha-preflight (now both init and join have this)
* kubeadm: update reference docs includes for 1.14
- remove includes from alpha.md
- add upload-certs to init-phase.md
- add join-phase.md and it's phases
* kubeadm: update the editorial content of join and init
- cleanup master->control-plane node
- add some notes about phases and join
- remove table about pre-pulling images
- remove outdated info about self-hosting
* kubeadm: update target release for v1alpha3 removal
1.14 -> 1.15
* kubeadm: copy edits for 1.14 reference docs (part1)
* kubeadm: use "shell" for code blocks
* kubeadm: update the 1.14 HA guide (#13191)
* kubeadm: update the 1.14 HA guide
* kubeadm: try to fix note/caution indent in HA page
* kubeadm: fix missing sudo and minor amends in HA doc
* kubeadm: apply latest amends to the HA doc for 1.14
* fixed a few missed merge conflicts
* Admission Webhook new features doc (#12938)
- kubernetes/kubernetes#74998
- kubernetes/kubernetes#74477
- kubernetes/kubernetes#74562
* Clarifications and fixes in GMSA doc (#13226)
* Clarifications and fixes in GMSA doc
Signed-off-by: Deep Debroy <ddebroy@docker.com>
* Update configure-gmsa.md
* Reformat to align headings and pre-reqs better
Signed-off-by: Deep Debroy <ddebroy@docker.com>
* Reformat to align headings and pre-reqs better
Signed-off-by: Deep Debroy <ddebroy@docker.com>
* Reformat to fix bullets
Signed-off-by: Deep Debroy <ddebroy@docker.com>
* Reword application of sample gmsa
Signed-off-by: Deep Debroy <ddebroy@docker.com>
* Update configure-gmsa.md
* Address feedback to use active voice
Signed-off-by: Deep Debroy <ddebroy@docker.com>
* Address feedback to use active voice
Signed-off-by: Deep Debroy <ddebroy@docker.com>
* RunAsGroup documentation for Progressing this to Beta (#12297)
* start serverside-apply documentation (#13077)
* start serverside-apply documentation
* add more concept info on server side apply
* Update api concepts
* Update api-concepts.md
* fix style issues
* Document CSI update (#12928)
* Document CSI update
* Finish CSI documentation
Also fix mistake with ExpandInUsePersistentVolumes documented as beta
* Overall docs for CSI Migration feature (#12935)
* Placeholder docs for CSI Migration feature
Signed-off-by: Deep Debroy <ddebroy@docker.com>
* Address CR comments and update feature gates
Signed-off-by: Deep Debroy <ddebroy@docker.com>
* Add mappings for CSI plugins
Signed-off-by: Deep Debroy <ddebroy@docker.com>
* Add sections for AWS and GCE PD migration
Signed-off-by: Deep Debroy <ddebroy@docker.com>
* Add docs for Cinder and CSI Migration info
Signed-off-by: Deep Debroy <ddebroy@docker.com>
* Clarify scope to volumes with file system
Signed-off-by: Deep Debroy <ddebroy@docker.com>
* Change the format of EBS and Cinder CSI Migration sections to follow the GCE template
Signed-off-by: Deep Debroy <ddebroy@docker.com>
* Windows documentation updates for 1.14 (#12929)
* Updated the note to indicate doc work for 1.14
* first attempt at md export from gdoc
* simplifyig
* big attempt
* moving DRAFT windows content to PR for review
* moving content to PR in markdown for review
* updated note tags
* Delete windows-contributing.md
deleting this file as it is already ported to the github contributor guide
* fixed formatting in intro and cluster setup guide
* updating formatting for running containers guide
* rejiggered end of troubleshooting
* fixed minor typos
* Clarified the windows binary download step
* Update _index.md
making updates based on feedback
* Update _index.md
updating ovn-kubernetes docs
* Update _index.md
* Update _index.md
* updating relative docs links
updating all the links to be relative links to /docs
* Update _index.md
* Update _index.md
updates for windows services and ovn-kubernetes
* formatted for correct step numbering
* fix typos
* Update _index.md
updates for flannel PR in troubleshooting
* Update _index.md
* Update _index.md
updating a few sections like roadmap, services, troubleshooting/filing tickets
* Update _index.md
* Update _index.md
* Update _index.md
* Fixed a few whitespace issues
* Update _index.md
* Update _index.md
* Update _index.md
* add section on upgrading CoreDNS (#12909)
* documentation for kubelet resource metrics endpoint (#12934)
* windows docs updates for 1.14 (#13279)
* Delete sample-l2bridge-wincni-config.json
this file is not used anywhere
* Update _index.md
* Update _index.md
* Update _index.md
* Update _index.md
* Update _index.md
* Rename content/en/docs/getting-started-guides/windows/_index.md to content/en/docs/setup/windows/_index.md
moving to new location
* Delete flannel-master-kubectl-get-ds.png
* Delete flannel-master-kubeclt-get-pods.png
* Delete windows-docker-error.png
* Add files via upload
* Rename _index.md to add-windows-nodes.md
* Create _index.md
* Update _index.md
* Update add-windows-nodes.md
* Update add-windows-nodes.md
* Create user-guide-windows-nodes.md
* Create user-guide-windows-containers.md
* Update and rename add-windows-nodes.md to intro-windows-nodes.md
* Update user-guide-windows-containers.md
* Rename intro-windows-nodes.md to intro-windows-in-kubernetes.md
* Update user-guide-windows-nodes.md
* Update user-guide-windows-containers.md
* Update user-guide-windows-containers.md
* Update user-guide-windows-nodes.md
* Update user-guide-windows-containers.md
* Update _index.md
* Update intro-windows-in-kubernetes.md
* Update intro-windows-in-kubernetes.md
fixing the pause image
* Update intro-windows-in-kubernetes.md
changing tables from html to MD
* Update user-guide-windows-nodes.md
converting tables from HTML to MD
* Update intro-windows-in-kubernetes.md
* Update user-guide-windows-nodes.md
* Update user-guide-windows-nodes.md
* Update user-guide-windows-nodes.md
updating the numbering , even though it messes up the notes a little bit. Jim will file a ticket to follow up
* Update user-guide-windows-nodes.md
* update to windows docs for 1.14 (#13322)
* Update intro-windows-in-kubernetes.md
* Update intro-windows-in-kubernetes.md
* Update intro-windows-in-kubernetes.md
* Update intro-windows-in-kubernetes.md
* Update intro-windows-in-kubernetes.md
* Update user-guide-windows-containers.md
* Update user-guide-windows-nodes.md
* Update intro-windows-in-kubernetes.md (#13344)
* server side apply followup (#13321)
* change some parts of serverside apply docs in response to comments
* fix typos and wording
* Update config.toml (#13365)
* Use feature-state note for CRI
* Note applicability to Linux hosts
* Explain cgroup ("control group")
* De-emphasize cgroup details
The individual runtime install steps already take account of this
advice.
* Revising bluemix.net links to cloud.ibm.com
* bluemix.net links are deprecated and no longer updated
* updated to new cloud.ibm.com link style
* Removing blog content
* setup/cri: add a section about cgroup drivers
A cgroup driver is an important setting for the CRI and the kubelet.
Add a section that explains why "systemd" is the suggested value
for a driver when installing a CRI.
In the case of Docker the kubelet will receive this value automatically.
For the other CRIs, the users should tackle this manually.
* Update cri.md
* Update building-from-source.md
Update the page to be consistent with the concepts template.
* Update building-from-source.md
Update the page to be consistent with the concepts template.
Since minikube v0.33.0 the default CNI config is not being provisioned
by default (https://github.com/kubernetes/minikube/pull/3441). Therefore,
we need to pass `--enable-default-cni` when starting minikube.
There is output of `kubeadm init` in create-cluster-kubeadm page.
But it is little old.
Some processes aren't included in it.
This update `kubeadm init` output to latest.
Since Kubernetes 1.10, the only supported CRI version is v1alpha2. However,
rktlet does not support that version and development seems stopped.
As there is no way to use rktlet with k8s >= 1.10, it's best to just remove
the rkt link from the "Install runtime" section of "Install kubeadm".
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
* kubeadm: add a caution about certs in HA document
* Update content/en/docs/setup/independent/high-availability.md
Co-Authored-By: neolit123 <neolit123@gmail.com>
If there is a combination of `systemctl` commands where in one you are
enabling it and in another you are starting it, that can be done in one
single command with an additional flag called `--now`. This commit
changes those two command steps in docs to one command.
The help of systemctl shows the following explanation of `--now`:
```
Start or stop unit in addition to enabling or disabling it
```
Signed-off-by: Suraj Deshmukh <surajd.service@gmail.com>
Added VMware Cloud PKS and Cloud Foundry Container Runtime to places within the document that are correctly represented for Cloud and on-primises offerings and tooling. I also properly alphabetized the list.
Signed-off-by: Kendrick Coleman <kendrickc@vmware.com>
* Updated pick-right-solution.md with Docker Enterprise
Added Docker commercial and community products to the list of solutions for running Kubernetes including Docker Desktop and Docker Enterprise.
* Fix Docker Desktop entry in pick-right-solution.md
The words "Docker Desktop" was duplicated in the description under locally-hosted solutions.
* Updated pick-right-solution.md with Docker solutions
Added line wraps at 80 characters and changed containerizing to "deploying in containers" to make it more new-user friendly.
* Updated pick-right-solution.md
modified wrapping of first line to not break hyphenated word.
* adding feature state snip
Adding in the feature state to indicate when this feature was introduced.
* adding in "stable"
Didn't know it defaulted to alpha.
* patch-reset
We should reset IPVS tables do so manually when reset kubernetes cluster by kubeadm.
* Modify reset ipvs description
* Update create-cluster-kubeadm.md
I removed the instruction regarding the installation of docker (1.13.1) as listed in #11779 and updated the instructions for Docker CE (1.18.1) because the official Docker documents only have instructions for Docker CE and Docker EE as listed in https://github.com/docker/docker.github.io/blob/master/install/linux/docker-ce/ubuntu.md. It may not be a good idea to have instructions for Docker 1.13 in our documents considering that the Official Docker Install guide recommends uninstalling older versions.
* Update metadata.generation behaviour for custom resources (#10705)
* update docs promoting plugins to beta (#10796)
* docs update to promote TaintBasedEvictions to beta (#10765)
* First Korean l10n work for dev-1.13 (#10719)
* Update outdated l10n(ko) contents (#10689)
fixes#10686
* Translate concepts/overview/what-is-kubernetes in Korean (#10690)
* Translate concepts/overview/what-is-kubernetes in Korean
* Feedback from ClaudiaJKang
* Translate concepts/overview/components in Korean (#10882)
* Translate concepts/overview/components in Korean #10717
* Translate concepts/overview/components in Korean
* Translate concepts/overview/components in Korean
* Apply Korean glossary: 서비스 어카운트
* Translate concepts/overview/kubernetes-api in Korean (#10773)
* Translate concepts/overview/kubernetes-api in Korean
* Applied feedback from ianychoi
* kubeadm: update the configuration docs to v1beta1 (#10959)
* kubeadm: add small v1beta1 related updates (#10988)
* ADD content/zh/docs/reference/setup-tools/kubeadm/kubeadm.md (#11031)
* ADD content/zh/docs/reference/setup-tools/kubeadm/kubeadm.md
* ADD content/zh/docs/reference/setup-tools/kubeadm/generated/kubeadm_init.md
* Update content/zh/docs/reference/setup-tools/kubeadm/kubeadm.md
Accepted
Co-Authored-By: YouthLab <tsui@highyouth.com>
* do not change 'master' or 'worker' nodes to '主从'
* Doc updates for volume scheduling GA (#10743)
* Doc updates for volume scheduling GA
* Make trivial change to kick build
* Document nodelease feature (#10699)
* advanced audit doc for ModeBlockingStrict (#10203)
* Rename EncryptionConfig to EncryptionConfiguration (#11080)
EncryptionConfig was renamed to EncryptedConfiguration and added to
the `apiserver.config.k8s.io` API group in Kubernetes 1.13.
The feature was previously in alpha and was not handling versions
properly, which lead to an originally unnoticed `v1` in the docs.
* content/zh/docs/reference/setup-tools/kubeadm/kubeadm-init.md
* trsanlate create-cluster-kubeadm.md to chinese (#11041)
* trsanlate create-cluster-kubeadm.md to chinese
* Update create-cluster-kubeadm.md
* update the feature stage in v1.13 (#11307)
* update new feature gates to document (#11295)
* refresh controller role list on rbac description page (#11290)
* node labeling restriction docs (#10944)
* Update 1.13 docs for CSI GA (#10893)
* dynamic audit documentation (#9947)
* adds dynamic audit documentation
* Copyedit for clarity
See also inline question/s
* Fix feature state shortcode
* Update feature state
* changes wording for dynamic audit flag behavior
* Minor copyedit
* fix dynamic audit yaml
* adds api enablement command to dynamic audit docs
* change ordering dynamic audit appears in
* add references to dynamic audit in webhook backend
* reword dynamic audit reference
* updates stages field for audit sink object
* changes audit sink api definition; rewords policy
* kubeadm: remove kube-proxy workaround (#11162)
* zh-trans content/en/docs/setup/independent/install-kubeadm.md (#11338)
* zh-trans content/en/docs/setup/independent/install-kubeadm.md
* Update install-kubeadm.md
* Update dry run feature to beta (#11140)
* vSphere volume raw block support doc update (#10932)
* Add docs for Windows DNS configurations (#10036)
* Update docs for fields allowed at root of CRD schema (#9973)
* Add docs for Windows DNS configurations
* add device monitoring documentation (#9945)
* kubeadm: adds upgrade instructions for 1.13 (#11138)
* kubeadm: adds upgrade instructions for 1.13
Signed-off-by: Chuck Ha <ha.chuck@gmail.com>
* add minor copyedits
Addressed a couple of copyedit comments a bit more cleanly.
* kubeadm: add improvements to HA docs (#11094)
* kubeadm: add information and diagrams for HA topologies
* kubeadm: update HA doc with simplified steps
* kubeadm: update HA doc with simplified steps
* edit ha, add new topology topic, reorder by weight
* troubleshoot markdown
* fix more markdown, fix links
* more markdown
* more markdown
* more markdown
* changes after reviewer comments
* add steps about Weave
* update note about stacked topology
* kubeadm external etcd HA upgrade 1.13 (#11364)
* kubeadm external etcd HA upgrade 1.13
Signed-off-by: Ruben Orduz <rubenoz@gmail.com>
* Update stacked controlplane steps
* kubeadm cert documentation (#11093)
* kubeadm certificate API and CSR documentation
* copyedits
* fix typo
* PR for diff docs (#10789)
* Empty commit against dev-1.13 for diff documentation
* Complete Declarative maangement with diff commands
* Second Korean l10n work for dev-1.13. (#11030)
* Update outdated l10n(ko) contents (#10915)
* Translate main menu for l10n(ko) docs (#10916)
* Translate tasks/run-application/horizontal-pod-autoscale-walkthrough (#10980)
* Translate content/ko/docs/concepts/overview/working-with-objects/kubernetes-object in Korean #11104 (#11332)
* Pick-right-solution page translates into Korean. (#11340)
* ko-trans: add jd/..., sap/..., ebay/..., homeoffice/... (#11336)
* Translate concept/workloads/pods/pod-overview.md (#11092)
Co-authored-by: June Yi <june.yi@samsung.com>
Co-authored-by: Jesang Myung <jesang.myung@gmail.com>
Co-authored-by: zerobig <38598117+zer0big@users.noreply.github.com>
Co-authored-by: Claudia J.Kang <claudiajkang@gmail.com>
Co-authored-by: lIuDuI <1693291525@qq.com>
Co-authored-by: Woojin Na(Eddie) <cheapluv@gmail.com>
* Rename encryption-at-rest related objects (#11059)
EncryptionConfig was renamed to EncryptedConfiguration and added to
the `apiserver.config.k8s.io` API group in Kubernetes 1.13.
The feature was previously in alpha and was not handling versions
properly, which lead to an originally unnoticed `v1` in the docs.
Also, the `--experimental-encryption-provider-config` flag is now called
just `--encryption-provider-config`.
* Documenting FlexVolume Resize alpha feature. (#10097)
* CR webhook conversion documentation (#10986)
* CR Conversion
* Addressing comments
* Addressing more comments
* Addressing even more comments
* Addressing even^2 more comments
* Remove references to etcd2 in v1.13 since support has been removed (#11414)
* Remove etcd2 references as etcd2 is deprecated
Link back to the v1.12 version of the etcd3 doc for
the etcd2->etcd3 migration instructions.
I updated the kube-apiserver reference manually,
unsure if that is auto-generated somehow.
The federation-apiserver can still potentially
support etcd2 so I didn't touch that.
* Remove outdated {master,node}.yaml files
There are master/node yaml files that reference
etcd2.service that are likely highly out of date.
I couldn't find any docs that actually reference
these templates so I removed them
* Address review comments
* Final Korean l10n work for dev-1.13 (#11440)
* Update outdated l10n(ko) contents (#11425)
fixes#11424
* Remove references to etcd2 in content/ko (#11416)
* Resolve conflicts against master for /ko contents (#11438)
* Fix unopened caution shortcode
* kubeadm: update the reference docs for 1.13 (#10960)
* docs update to promote TaintBasedEvictions to beta (#10765)
* First Korean l10n work for dev-1.13 (#10719)
* Update outdated l10n(ko) contents (#10689)
fixes#10686
* Translate concepts/overview/what-is-kubernetes in Korean (#10690)
* Translate concepts/overview/what-is-kubernetes in Korean
* Feedback from ClaudiaJKang
* Translate concepts/overview/components in Korean (#10882)
* Translate concepts/overview/components in Korean #10717
* Translate concepts/overview/components in Korean
* Translate concepts/overview/components in Korean
* Apply Korean glossary: 서비스 어카운트
* Translate concepts/overview/kubernetes-api in Korean (#10773)
* Translate concepts/overview/kubernetes-api in Korean
* Applied feedback from ianychoi
* kubeadm: update the configuration docs to v1beta1 (#10959)
* kubeadm: add small v1beta1 related updates (#10988)
* update new feature gates to document (#11295)
* Update dry run feature to beta (#11140)
* kubeadm: add improvements to HA docs (#11094)
* kubeadm: add information and diagrams for HA topologies
* kubeadm: update HA doc with simplified steps
* kubeadm: update HA doc with simplified steps
* edit ha, add new topology topic, reorder by weight
* troubleshoot markdown
* fix more markdown, fix links
* more markdown
* more markdown
* more markdown
* changes after reviewer comments
* add steps about Weave
* update note about stacked topology
* kubeadm: update reference docs
- add section about working with phases under kubeadm-init.md
- update GA / beta status of features
- kubeadm alpha phase was moved to kubeadm init phase
- new commands were added under kubeadm alpha
- included new CoreDNS usage examples
* Generate components and tools reference
* Add generated federation API Reference (#11491)
* Add generated federation API Reference
* Add front matter to federation reference
* Remove whitespace from federation front matter
* Remove more whitespace from federation front matter
* Remove superfluous kubefed reference
* Add frontmatter to generated kubefed reference
* Fix kubefed reference page frontmatter
* Generate kubectl reference docs 1.13 (#11487)
* Generate kubectl reference docs 1.13
* Fix links in kubectl reference
* Add 1.13 API reference (#11489)
* Update config.toml (#11486)
* Update config.toml
Preparing for 1.13 release, updating the config.toml and dropping the 1.8 docs reference.
* update dot releases and docsbranch typo
* adding .Site. to Params.currentUrl (#11503)
see https://github.com/kubernetes/website/pull/11502 for context
* Add 1.13 Release notes (#11499)
* update ol ul li bullet to disc
- update ol ul li bullet to disc
- move note out of list so that list numbers are correct
- fix typo
* futher clean-up
* update documentation on CoreDNS
* Update dns-custom-nameservers.md
Fixed nit noted in comments and cleaned up a few more things while I was in there. This whole topic needs a complete redo, but this PR is an iterative improvment. Thanks!
In AWS cloud platform, omitting the name while initializing etcd cluster
causes "Couldn't find local name "$HOSTNAME in the initial cluster configuration"
It seems that the etcd tries to find short hostname, not the FQDN hostname.
To avoid this, passing the name explicitly to etcd configuration solved the problem.
[related issue1](https://github.com/coreos/bugs/issues/2054)
[related issue2](https://github.com/kubernetes/kubeadm/issues/653)
When starting minikube with
`--extra-config=apiserver.Authorization.Mode=RBAC`, the apiserver
container exits with the following error:
```
error: unknown flag: --Authorization.Mode
```
Starting it with `--extra-config=apiserver.authorization-mode=RBAC`
instead fixes the issue.
* clean-up minikube toc
- clean-up minikube toc
- clean-up localkube link
* update sub-headers
* added link to kubeadm
- added link to kubeadm
- clean-up link to kubectl config set-context
Now that there are multiple predictable and stable upstream solutions to deploy Kubernetes, we should not express an opinion as to which one to recommend without also mentioning the reasons for it.
* add Digital Rebar KRIB to installer lists
* second review, minor cleanups
* address corrections flagged by @neolit123
* resolve merge - fix table
* add Digital Rebar KRIB to installer lists
* second review, minor cleanups
* address corrections flagged by @neolit123
* Change deb repo from http to https
Given that http://apt.kubernetes.io/ is redirecting to https://packages.cloud.google.com/apt/ which is secure, then the suggestion is to change the source list to point to the correct destination.
* change apt source to https with apt.kubernetes.io
Hi all,
AFAICT and after reading
[this](https://kubernetes.io/docs/reference/setup-tools/kubeadm/kubeadm-alpha/)
`kubeadm alpha phase kubelet config annotate-cri` should invoked for
consistency in all joining controller nodes (to match what is already
done by default in the seed/initial one).
best regards,
António
Signed-off-by: António Meireles <antonio.meireles@reformi.st>
Current manifest of flannel is old for Kubernetes v1.12 .
Deployment cluster is failed at installing pod network add-on.
This PR update flannel manifest URL.
* Add microk8s to pick-right-solution.md
Microk8s is a single-command installation of upstream Kubernetes on any Linux and should be included in the list of local-machine solutions.
* capitalized Istio
The CentsOS/RHEL/... section mentiones that SELinux must be put in permissive
mode, but the supplied command does the job only for the current boot. Once
the system is restarted SELinux can again enter enforcing mode thus breaking
a Kubernetes cluster.
Fix this by adding a sed command that permanently changes the SELinux mode to
permissive.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
GKE On-Prem | Google Cloud
https://cloud.google.com/gke-on-prem/
Containerize on-premises applications and be cloud-ready. With GKE On-Prem, you get the Google Kubernetes Engine (GKE) experience directly in your data center. ... GKE On-Prem also registers your cluster with Google Cloud Console in order to have a single-pane-of-glass view for managing all your clusters.
* Update docs for fields allowed at root of CRD schema (#9973)
* add plugin docs and examples (#10053)
* docs update to promote TaintNodesByCondition to beta (#9626)
* HPA Specificity Improvements (#8757)
Updated the HPA docs to reference the `autoscaling/v2beta2` API version,
and added documentation about the new fields.
* adjust docs for pod ready++ (#10049)
* Remove --cadvisor-port - has been deprecated since v1.10 (#10023)
Change-Id: Id2a685473a243aef492a98ff450759f39e362557
* Add Documentation for Snapshot Feature (#9948)
* Add documentation for snapshot feature
* Update volume-snapshots.md
* Add dry-run to api-concepts (#10033)
* kubeadm-init: Update the offline support section (#10062)
The update includes the following things (in mind with Kubernetes 1.12):
- Remove the 1.8 image versions
- Add the 1.10 image versions that were missing until now
- Include a comment for the missing arch suffixes in 1.12
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
* Say bye to `DynamicProvisioningScheduling` (#10157)
The mentioned feature gate is now collapsed into `VolumeScheduling`.
xref: kubernetes/kubernetes#67432
* Update ResourceQuota per PriorityClass state for 1.12 (#10229)
* TokenRequest and TokenRequestProjection now beta (#10161)
xref: kubernetes/kubernetes#67349
* Change feature state for kms provider to beta. (#10230)
KMS Provider will be graduating to beta in v1.12, reflecting this change on the website.
* coredns default (#10200)
* Promote ShareProcessNamespace to beta in docs (#9996)
* Add CoreDNS details to DNS Debug docs (#10201)
* add coredns details
* address nits, add query logging section
* Update docs with topology aware dynamic provisioning (#9939)
* Document topology aware volume binding feature
* update for readability
* Update storage-classes.md
* comma splice
* don't abbreviate
* HPA Algorithm Information Improvements (#9780)
* Update HPA docs with more algorithm details
The HPA docs pointed to an out-of-date document for information on the
algorithm details, which users were finding confusing. This sticks a
section on the algorithm in the HPA docs instead, documenting both
general behavior and corner cases.
* Add glossary info, HPA docs on quantities
People often ask about the quantity notation when working with the
metrics APIs, so this adds a glossary entry on quantities (since they're
used elsewhere in the system), and a short explantation in the HPA walkthough.
* Information about HPA readiness and stabilization
This adds information about the new changes to HPA readiness and
stabilization from kubernetes/features#591, and other minor changes that
landed in Kubernetes 1.12.
* Update horizontal-pod-autoscale.md
* Audit 1.12 doc (#9953)
* audit 1.12 document
* remove legacy audit feature
https://github.com/kubernetes/kubernetes/pull/65862
* update feature gate doc
* MountPropagation is now GA (#10090)
* RuntimeClass documentation (#10102)
* RuntimeClass documentation
* Update runtime-class.md
* Add documentation for Scheduler performance tuning (#10048)
* Add documentation for Scheduler performance tuning
* Update scheduler-perf-tuning.md
* TTL controller for cleaning up finished resources (#10064)
* TTL controller for cleaning up finished resources
* Address comments
* Update ttlafterfinished.md
* Bump quota configuration api version (#10217)
* Incremental update from master (#10278)
* fix invalid href of cloud controller manager (#10240)
* fix invalid yaml format (#10238)
* update storage-limits doc with Azure disk part (#10224)
update storage-limits doc with Azure disk part
fix comments
* Update kubelet-config-file.md (#10222)
Update link to KubeletConfiguration struct.
* fix a trivial misspelling (#10244)
* Fix cassandra-statefulset.yaml indent level (#10243)
* Mention minimum etcd versions (#10208)
Source: https://groups.google.com/d/msg/kubernetes-dev/jMPA4JzKiY4/HIx2ugvLBAAJ
* fix 404 error (#10250)
* Small verb tweak (#10190)
Present participle, ftw.
* Add AnchorJS logic for header links (#10155)
* Add AnchorJS JavaScript
* Remove existing inpage_heading logic
* Remove underline from anchor tags
* Use single icon and add touch visibility
* Use paragraph link icon for AnchorJS
* Update Sass to use code formatting in docsContent headers
* Update header size coverage to H3-H6
* fix broken link in kubefed.md (#10254)
* Update the version numbers for the X-Remote-Extra- and Impersonate-Extra- key fixes (#9827)
The fix was cherry picked into 1.11.3, 1.10.7, and 1.9.11:
https://github.com/kubernetes/kubernetes/pull/67162https://github.com/kubernetes/kubernetes/pull/67163https://github.com/kubernetes/kubernetes/pull/67164
* fix typo (#10168)
* fix typo
* addressing comments.
* Update setup-ha-etcd-with-kubeadm.md
* fix typos (#10252)
* fix description of contribute guide (#10253)
* describe truncate feature about advanced audit (#10236)
* describe truncate feature about advanced audit
* Update audit.md
* docs update to promote ScheduleDaemonSetPods to beta (#9923)
* Dynamic volume limit updates for 1.12 (#10211)
* add a placeholder commit
* Update docs for csi volume limits
* Update storage-limits.md
* Add "MayRunAs" value among other GroupStrategies (#9888)
* Add CoreDNS details to the customize DNS doc (#10228)
* Add CoreDNS details to the customize DNS doc
Rewrite the document to include more details about CoreDNS, since it's now the default from v1.12
* Address comments
* Improve doc wording
* Fix link
* Update dns-custom-nameservers.md
* Update dns-custom-nameservers.md
* Fix secrets docs in 1.12 branch (#10056)
* Fix secrets docs
* Update secret.md
* Revert CoreDNS Docs (#10319)
* Revert "Add CoreDNS details to DNS Debug docs (#10201)"
This reverts commit 462817a674.
* Revert "Add CoreDNS details to the customize DNS doc (#10228)"
This reverts commit e7319eeb8c.
* Revert "coredns default (#10200)"
This reverts commit 698e93b441.
* Add CRI installation instructions page
Added cri-installation page with CRI installation instructions
Referenced it from kubeadm-init and install-kubeadm pages.
* kubeadm: update API types documentation for 1.12 (#10283)
v1alpha2 -> v1alpha3
MasterConfiguration -> [new-api-types]
* TokenRequest feature documentation (#10295)
* AdvancedAuditing is now GA (#10156)
xref: kubernetes/kubernetes#65862
`AdvancedAuditing` feature is GA in 1.12. This PR adjusts the related
docs.
* update runtime-class.md (#10332)
* update runtime-class.md
* Update runtime-class.md
* Document cross-authorizer permissions for creating RBAC roles (#10015)
* Document cross-authorizer permissions for creating RBAC roles
* Update rbac.md
* kubeadm: update authored content for 1.12 (reference docs and cluster creation) (#10348)
* kubeadm: update authored content in reference docs for 1.12
* kubeadm: add time frame in create-cluster-kubeadm for 1.12
* add AllowedProcMountTypes and ProcMountType to docs (#9911)
Signed-off-by: Jess Frazelle <acidburn@microsoft.com>
* kubeadm: add new command line reference (#10306)
Add:
- placeholder files
- include place holder files
- include "renew" sub command
- add missing tabs for "alpha phase kubelet"
* Documenting SCTP support in Kubernetes (#10279)
* Documenting SCTP support in Kubernetes Service, Endpoint, NetworkPolicy and Pod
* Updates based on comments on the PR
* kubectl expose update with SCTP support
* Updated according to comments in the PR
* Revert "kubectl expose update with SCTP support"
This reverts commit 0d5a1e6720.
* TLS Bootstrap and Server Cert Rotation feature documentation (#10232)
* TokenRequest feature documentation
* line wrapping to make review not insane
* update content for GA without major refactor
* Update kubelet-tls-bootstrapping.md
* Add clarifications for volume snapshots (#10296)
* Update kubadm ha installation for 1.12 (#10264)
* Update kubadm ha installation for 1.12
Signed-off-by: Chuck Ha <ha.chuck@gmail.com>
* update stable version
Signed-off-by: Chuck Ha <ha.chuck@gmail.com>
* Update stacked control plane for v1.12 (#2)
* use v1alpha3
Signed-off-by: Chuck Ha <ha.chuck@gmail.com>
* more v1alpha3 (#4)
* updates
Signed-off-by: Chuck Ha <ha.chuck@gmail.com>
* Document how to run in-tree cloud providers with kubeadm (#10357)
Change-Id: Iab6b996a830503d74a6eb0c507c5f8ca7a39235b
* kubeadm reference doc for release 1.12 (#10359)
* Revert "Revert "Add CoreDNS details to DNS Debug docs (#10201)""
This reverts commit bb30f4d1fc.
* Revert "Revert "Add CoreDNS details to the customize DNS doc (#10228)""
This reverts commit bc23d45c09.
* Revert "Revert "coredns default (#10200)""
This reverts commit 7f4350d6ab.
* add missing instruction for ha guide (#10374)
Signed-off-by: Chuck Ha <ha.chuck@gmail.com>
* kubeadm - Ha upgrade updates (#10340)
* Update HA upgrade docs
* Adds external etcd HA upgrade guide
Signed-off-by: Chuck Ha <ha.chuck@gmail.com>
* copyedit
* more edits
* add runasgroup in psp (#10076)
* update KubeletPluginsWatcher feature gate (#10205)
* generated 1.12 docs
* Building Multi-arch images with Manifests (#10379)
In 1.12, a variety of images used in a typical kubernetes installation
have started to using manifests to better support environments with arm
or ppc64le architectures. For example all images used with kubeadm by
default have manifests, another would be all the tests in the
conformance test suite. Here we capture the best practices for everyone
to start using manifests in their own workflows.
Change-Id: I5ba4c5fe55ffc9486a8251760f3352be4f2e1494
* Upgrade docs for v1.12 (#10344)
* generated assets and docs
* remove 1.7
* update 1.12
* update plugin documentation under docs>tasks>extend-kubectl (#10259)
* update plugin documentation under docs>tasks>extend-kubectl
* Update kubectl-plugins.md
* Added content to Setup index
* Alphabetized providers
* Update _index.md
* Make Turnkey Cloud Solutions a H2 for toc
* Updated from Andrew's Comments
* fixing headings
* add new turnkey cloud solution to setup: ICP on
multiple clouds
Signed-off-by: Brad Topol <btopol@us.ibm.com>
* Updated ICP Multiple Cloud URL and IBM Cloud table entry
* small tweak to kick off redeploy
* Change product name
From IBM Cloud Container Service to IBM Cloud Kubernetes Service
* Adding IKS to the table of solutions
Not sure about where in the table it should be placed. The note said,
“The above table is ordered by version test/used in nodes, followed by
support level.”
* Adding IKS to Cloud Providers page
* Adding IBM Cloud Container Registry to private registry topic
* Updating language on cloud provider page
* Revising text for the registry entry
* Specifying that it's calico network policies
* Update high-availability.md
Fix for https://github.com/kubernetes/website/issues/9594#
Changed the value of `kubernetesVersion` to `v1.11.1` in the kubeadm-config.yaml so it pulls the correct server images for the latest v1.11 release.
I don't like the idea of having to change this value for every point release. Maybe someone can come up with a better solution that submitting a change to the documentation for every minor release?
* Update high-availability.md
* Changed Azure Container Service names and to Azure Kubernetes Service
* Changed docs link
* Service link redirects to aks link and remains unchanged.
* Propogating
not "Propogating", is "Propagating"
* `kubelet init` and `kubelet join`
`kubeadm init` and `kubeadm join`, not `kubelet init` and `kubelet join`
This patch fix content "List existing nodes, pods, services and more,
in all namespaces, or in just one:" lost pod list.
Signed-off-by: Yuanbin.Chen <cybing4@gmail.com>
* create-cluster-kubeadm: update notes about flannel
Add note that a specific manifest can be used to support
different architectures until version 0.11.0 is released.
* Fix passive voice
Style guide compliance
* Fix link order in Setup section
* fix merge conflict
* Co-authored-by: Jennifer Rondeau <jennifer.rondeau@gmail>
* flip front matter order
* Remove Imported section and add Community section
* revert flip
* change section weights
* revert case study change
* update kops version to latest (1.10.0)
added a more recent version of kops.
now also supports kubernetes 1.10.x
* more updates on the kops.md
- added links to markup files in the kops repo
- slack channel updated
* rebase certificates PR on Hugo master
Co-authored-by: liztio <liz@heptio.com>
* fix per comments, add note about front-proxy
* fix up key usage table and references
* kubeadm: Add a kubelet-kubeadm integration reference doc
* kubeadm: edits for the kubelet-kubeadm integration doc
* kubeadm: move the kubelet-kubeadm integration doc
* Apply edits to kubelet-integration.md
* Make kubelet-integration.md use a template
Also apply MD formatting fixes.
* Copyedit
* Address feedback on copyedit
* added a couple of typo fixes
* update admission-controller links
(cherry picked from commit 37043991a61e5e6f4ac1c463b14c65430b192553)
* updated links found using greedier regex
(cherry picked from commit 45c6d4cf7430245a3b4e81eae245000beea88841)
* correct link in cn/docs/admin/authorization/_index.md
* fix incorrect changes introduced in eac3619
* undo update of cn content
* fix link
* fix admission webhook link
This change is to list JuniperContrail/TungstenFabric as a provider
of Pod networking for a Kubernetes cluster.
Juniper's CNI solution has been available as a open source product
for couple of years now. It is a mature solution that has been
deployed in live clusters.
* Seperate priority and preemption (#8144)
* Doc about PID pressure condition. (#8211)
* Doc about PID pressure condition.
Signed-off-by: Da K. Ma <klaus1982.cn@gmail.com>
* "so" -> "too"
* Update version selector for 1.11
* StorageObjectInUseProtection is GA (#8291)
* Feature gate: StorageObjectInUseProtection is GA
Update feature gate reference for 1.11
* Trivial commit to re-trigger Netlify
* CRIContainerLogRotation is Beta in 1.11 (#8665)
* Seperate priority and preemption (#8144)
* CRIContainerLogRotation is Beta in 1.11
xref: kubernetes/kubernetes#64046
* Bring StorageObjectInUseProtection feature to GA (#8159)
* StorageObjectInUseProtection is GA (#8291)
* Feature gate: StorageObjectInUseProtection is GA
Update feature gate reference for 1.11
* Trivial commit to re-trigger Netlify
* Bring StorageObjectInUseProtection feature to GA
StorageObjectInUseProtection is Beta in K8s 1.10.
It's brought to GA in K8s 1.11.
* Fixed typo and added feature state tags.
* Remove KUBE_API_VERSIONS doc (#8292)
The support to the KUBER_API_VERSIONS environment variable is completely
dropped (no deprecation). This PR removes the related doc in
release-1.11.
xref: kubernetes/kubernetes#63165
* Remove InitialResources from admission controllers (#8293)
The feature (was experimental) is dropped in 1.11.
xref: kubernetes/kubernetes#58784
* Remove docs related to in-tree support to GPU (#8294)
* Remove docs related to in-tree support to GPU
The in-tree support to GPU is completely removed in release 1.11.
This PR removes the related docs in release-1.11 branch.
xref: kubernetes/kubernetes#61498
* Update content updated by PR to Hugo syntax
Signed-off-by: Misty Stanley-Jones <mistyhacks@google.com>
* Update the doc about extra volume in kubeadm config (#8453)
Signed-off-by: Xianglin Gao <xianglin.gxl@alibaba-inc.com>
* Update CRD Subresources for 1.11 (#8519)
* coredns: update notes in administer-cluster/coredns.md (#8697)
CoreDNS is installed by default in 1.11.
Add notes on how to install kube-dns instead.
Update notes about CoreDNS->CoreDNS upgrades as in 1.11
the Corefile is retained.
Add example on upgrading from kube-dns to CoreDNS.
* kubeadm-alpha: CoreDNS related changes (#8727)
Update note about CoreDNS feature gate.
This change also updates a tab as a kubeadm sub-command
will change.
It looks for a new generated file:
generated/kubeadm_alpha_phase_addon_coredns.md
instead of:
generated/kubeadm_alpha_phase_addon_kube-dns.md
* Update cloud controller manager docs to beta 1.11 (#8756)
* Update cloud controller manager docs to beta 1.11
* Use Hugo shortcode for feature state
* kubeadm-upgrade: include new command `kubeadm upgrade diff` (#8617)
Also:
- Include note that this was added in 1.11.
- Modify the note about upgrade guidance.
* independent: update CoreDNS mentions for kubeadm (#8753)
Give CoreDNS instead of kube-dns examples in:
- docs/setup/independent/create-cluster-kubeadm.md
- docs/setup/independent/troubleshooting-kubeadm.md
* update 1.11 --server-print info (#8870)
* update 1.11 --server-print info
* Copyedit
* Mark ExpandPersistentVolumes feature to beta (#8778)
* Update version selector for 1.11
* Mark ExpandPersistentVolumes Beta
xref: kubernetes/kubernetes#64288
* fix shortcode, add placeholder files to fix deploy failures (#8874)
* declare ipvs ga (#8850)
* kubeadm: update info about CoreDNS in kubeadm-init.md (#8728)
Add info to install kube-dns instead of CoreDNS, as CoreDNS
is the default DNS server in 1.11.
Add notes that kubeadm config images can be used to list and pull
the required images in 1.11.
* kubeadm: update implementation-details.md about CoreDNS (#8829)
- Replace examples from kube-dns to CoreDNS
- Add notes about the CoreDNS feature gate status in 1.11
- Add note that the service name for CoreDNS is also
called `kube-dns`
* Update block device support for 1.11 (#8895)
* Update block device support for 1.11
* Copyedits
* Fix typo 'fiber channel' (#8957)
Signed-off-by: Misty Stanley-Jones <mistyhacks@google.com>
* kubeadm-upgrade: add the 'node [config]' sub-command (#8960)
- Add includes for the generated pages
- Include placeholder generated pages
* kubeadm-init: update the example for the MasterConfiguration (#8958)
- include godocs link for MasterConfiguration
- include example MasterConfiguration
- add note that `kubeadm config print-default` can be used
* kubeadm-config: include new commands (#8862)
Add notes and includes for these new commands in 1.11:
- kubeadm config print-default
- kubeadm config migrate
- kubeadm config images list
- kubeadm config images pull
Include placeholder generated files for the above.
* administer-cluster/coredns: include more changes (#8985)
It was requested that for this page a couple of methods
should be outlined:
- manual installation for CoreDNS explained at the Kubernetes
section of the GitHub project for CoreDNS
- installation and upgrade via kubeadm
Make the above changes and also add a section "About CoreDNS".
This commit also lowercases a section title.
* Update CRD subresources doc for 1.11 (#8918)
* Add docs for volume expansion and online resizing (#8896)
* Add docs for volume expansion going beta
* Copyedit
* Address feedback
* Update exec plugin docs with TLS credentials (#8826)
* Update exec plugin docs with TLS credentials
kubernetes/kubernetes#61803 implements TLS client credential support for
1.11.
* Copyedit
* More copyedits for clarification
* Additional copyedit
* Change token->credential
* NodeRestriction admission prevents kubelet taint removal (#8911)
* dns-custom-namerserver: break down the page into mutliple sections (#8900)
* dns-custom-namerserver: break down the page into mutliple sections
This page is currently about kube-dns and is a bit outdated.
Introduce the heading `# Customizing kube-dns`.
Introduce a separate section about CoreDNS.
* Copyedits, fix headings for customizing DNS
Hey Lubomir,
I coypedited pretty heavily because this workflow is so much easier for docs and because I'm trying to help improve everything touching kubeadm as much as possible.
But there's one outstanding issue wrt headings and intro content: you can't add a heading 1 to a topic to do what you wanted to do. The page title in the front matter is rendered as a heading 1 and everything else has to start at heading 2. (We still need to doc this better in the docs contributing content, I know.)
Instead, I think we need to rewrite the top-of-page intro content to explain better the relationship between kube-dns and CoreDNS. I'm happy to write something, but I thought I'd push this commit first so you can see what I'm doing.
Hope it's all clear -- ping here or on Slack with any questions ~ Jennifer
* Interim fix for talking about CoreDNS
* Fix CoreDNS details
* PSP readOnly hostPath (#8898)
* Add documentation for crictl (#8880)
* Add documentation for crictl
* Copyedit
Signed-off-by: Misty Stanley-Jones <mistyhacks@google.com>
* Final copyedit
* VolumeSubpathEnvExpansion alpha feature (#8835)
* Note that Heapster is deprecated (#8827)
* Note that Heapster is deprecated
This notes that Heapster is deprecated, and migrates the relevant
docs to talk about metrics-server or other solutions by default.
* Copyedits and improvements
Signed-off-by: Misty Stanley-Jones <mistyhacks@google.com>
* Address feedback
* fix shortcode to troubleshoot deploy (#9057)
* update dynamic kubelet config docs for v1.11 (#8766)
* update dynamic kubelet config docs for v1.11
* Substantial copyedit
* Address feedback
* Reference doc for kubeadm (release-1.11) (#9044)
* Reference doc for kubeadm (release-1.11)
* fix shortcode to troubleshoot deploy (#9057)
* Reference doc for kube-components (release-1.11) (#9045)
* Reference doc for kube-components (release-1.11)
* Update cloud-controller-manager.md
* fix shortcode to troubleshoot deploy (#9057)
* Documentation on lowercasing kubeadm init apiserver SANs (#9059)
* Documentation on lowercasing kubeadm init apiserver SANs
* fix shortcode to troubleshoot deploy (#9057)
* Clarification in dynamic Kubelet config doc (#9061)
* Promote sysctls to Beta (#8804)
* Promote sysctls to Beta
* Copyedits
Signed-off-by: Misty Stanley-Jones <mistyhacks@google.com>
* Review comments
* Address feedback
* More feedback
* kubectl reference docs for 1.11 (#9080)
* Update Kubernetes API 1.11 ref docs (#8977)
* Update v1alpha1 to v1beta1.
* Adjust left nav for 1.11 ref docs.
* Trim list of old ref docs.
* Update Federation API ref docs for 1.11. (#9064)
* Update Federation API ref docs for 1.11.
* Add titles.
* Update definitions.html
* CRD versioning Public Documentation (#8834)
* CRD versioning Public Documentation
* Copyedit
Signed-off-by: Misty Stanley-Jones <mistyhacks@google.com>
* Address feedback
* More rewrites
* Address feedback
* Update main CRD page in light of versioning
* Reorg CRD docs
* Further reorg
* Tweak title
* CSI documentation update for raw block volume support (#8927)
* CSI documetation update for raw block volume support
* minor edits for "CSI raw block volume support"
Some small grammar and style nits.
* minor CSIBlockVolume edits
* Update kubectl component ref page for 1.11. (#9094)
* Update kubectl component ref page for 1.11.
* Add title. Replace stevepe with username.
* crd versioning doc: fix nits (#9142)
* Update `DynamicKubeletConfig` feature to beta (#9110)
xref: kubernetes/kubernetes#64275
* Documentation for dynamic volume limits based on node type (#8871)
* add cos for storage limits
* Update docs specific for aws and gce
* fix some minor things
* Update storage-limits.md
* Add k8s version to feature-state shortcode
* The Doc update for ScheduleDaemonSetPods (#8842)
Signed-off-by: Da K. Ma <klaus1982.cn@gmail.com>
* Update docs related to PersistentVolumeLabel admission control (#9109)
The said admission controller is disabled by default in 1.11
(kubernetes/kubernetes#64326) and scheduled to be removed in future
release.
* client exec auth: updates for 1.11 (#9154)
* Updates HA kubeadm docs (#9066)
* Updates HA kubeadm docs
Signed-off-by: Chuck Ha <ha.chuck@gmail.com>
* kubeadm HA - Add stacked control plane steps
* ssh instructions and some typos in the bash scripts
Signed-off-by: Chuck Ha <ha.chuck@gmail.com>
* Fix typos and copypasta errors
* Fix rebase issues
* Integrate more changes
Signed-off-by: Chuck Ha <ha.chuck@gmail.com>
* copyedits, layout and formatting fixes
* final copyedits
* Adds a sanity check for load balancer connection
Signed-off-by: Chuck Ha <ha.chuck@gmail.com>
* formatting fixes, copyedits
* fix typos, formatting
* Document the Pod Ready++ feature (#9180)
Closes: #9107
Xref: kubernetes/kubernetes#64057
* Mention 'KubeletPluginsWatcher' feature (#9177)
* Mention 'KubeletPluginsWatcher' feature
This feature is more developers oriented than users oriented, so simply
mention it in the feature gate should be fine.
In future, when the design doc is migrated from Google doc to the
kubernetes/community repo, we can add links to it for users who want to
dig deeper.
Closes: #9108
Xref: kubernetes/kubernetes#63328, kubernetes/kubernetes#64605
* Copyedit
* Amend dynamic volume list docs (#9181)
The dynamic volume list feature has been documented but the feature gate
related was not there yet.
Closes: #9105
* Document for service account projection (#9182)
This adds docs for the service account projection feature.
Xref: kubernetes/kubernetes#63819, kubernetes/community#1973Closes: #9102
* Update pod priority and preemption user docs (#9172)
* Update pod priority and preemption user docs
* Copyedit
* Documentation on setting node name with Kubeadm (#8925)
* Documentation on setting node name with Kubeadm
* copyedit
* Add kubeadm upgrade docs for 1.11 (#9089)
* Add kubeadm upgrade docs for 1.11
* Initial docs review feedback
* Add 1-11 to outline
* Fix formatting on tab blocks
* Move file to correct location
* Add `kubeadm upgrade node config` step
* Overzealous ediffing
* copyedit, fix lists and headings
* clarify --force flag for fixing bad state
* Get TOML ready for 1.11 release
* Blog post for 1.11 release (#9254)
* Blog post for 1.11 release
* Update 2018-06-26-kubernetes-1.11-release-announcement.md
* Update 2018-06-26-kubernetes-1.11-release-announcement.md
* Update 2018-06-26-kubernetes-1.11-release-announcement.md
Changes that will help upcoming consolidation work:
- Add variable `githubWebsiteRaw` to config.toml to facilitate building
links to raw YAML files
- Revise `codenew` shortcode to generate links to raw YAML files instead
of github.com file view;
- Rename `artifacts` directory to `examples` to better reflect its usage;
Accompanied changes as show cases:
- Moved `deployment.yaml`, `deployment-update.yaml` and
`deployment-scale.yaml` to the new `examples/application` subdirectory;
- Removed duplicate instances of the above YAML files in other
directories;
- Update example_test.go to test the relocated YAML files and removed
testing for files that no longer needed.
This page adds instructions on how to use the kubeadm config
to pass flags to control plane components.
The provided examples are pretty basic. Later this can be expanded with
actual user stories.
This heading is missing in the 1.10 documentations which makes it hard to find the needed information because the anchor `setting up a master load balancer` points to nowhere. This was working in the 1.19 documentation and it was really useful.
* Update etcd config description of kubeadm HA doc
- Fix url from http to https
- Add etcd-listen-ip description
* Edit for clarity and list markup
* More minor edits
`base64` generates 76-character chunks of text, delimited by a space character. the `=+/` characters are removed, so on the (uniformly random) offchance that 44 characters are removed, the last `dd` will read a whitespace, and the token will include a whitespace, which "usually" isn't defined as an "alphanumeric character." Removing the space character as well, would mean that 142 of the characters would have to be a `=+/[:space:]`, before the token becomes shorter.
Cannot copy any apiserver* keys and certs, as they are generated on startup. If not, it results in an error from kubeadm
```
certificate apiserver is not signed by corresponding CA
```
* Overall cleanup for kubeadm setup guide.
* Add sonobuoy verification next step
* Partial copyedits
Hit a place where we also have formatting issues, plus a TODO (removed bc these changes go live as soon as merged). More work to do, but this should help the bottleneck for now.
* Address comments from reviewers
* Copy edits, fiddly bits, and clearer warnings
Incorporated feedback from @mistyhacks, fixed many nits, reorganized some **Note:** content more sensibly.
* Revised title per feedback
Added information to install cfssl and cfssljson on all etc nodes as they are required to generate clients certificates
Change <podname> to <name> in static pod yaml description for etcd deployment
Additionaly the first bash script in "Run kubeadm init on master0" section doesn't render correctly on kubernetes.io site (https://kubernetes.io/docs/setup/independent/high-availability/) but I don't see any pb with markdown.
* Issue #8493 - Missing instructions in "Creating HA clusters with kubeadm":
- change to kubeadm-init.yaml: configure `advertiseAddress` to the VIP
- added section with instructions for configuring `kubelet`, `kube-controller-manager` and `kube-scheduler` to use the VIP
* Issue #8493 - Missing instructions in "Creating HA clusters with kubeadm": Change use the 'controlPlaneEndpoint' setting in kubeadm-init.yaml, hence no configuration file patching afterwards is necessary anymore.
* Issue #8493 - added private IP to apiServerCertSANs as proposed by @detiber
Fix some hugo transition issues:
* Use `file` as code syntax following our style guide and fixing
bug #8868
* Reformat Note so that it's not displayed as text.
Closes: #8868
* Update high-availability.md
[fix]command should leading
* Repair code inside list items, remove "like so"
* Modify one code block, change 1-step procedures to not be procedures
* Fix etcd installation command in kubeadm tutorial
Shells interpolate variables before running commands, so setting the
ETCD_VERSION variable must be separated from the command that
interpolates it. Otherwise an empty string will be interpolated.
The rm command isn't necessary - the output from curl is piped directly
to tar.
* Update stated default etcd version for K8s 1.10
1.10 is the most recent version of K8s and the default etcd server
version for it is 3.1.12
* Fix non-US English typo
Style guide states US English should be used
* Fix url to etcd binary
etcd should be 3.12 for kubernetes 1.10, also fix the URL (probably was broken after migration to Hugo)
* Make Curl command safer
You really only need that variable to be set for the specific command, so no need to export it.
Also, when using Bash variables in a string, you should enclose them in curly braces to delineate them from the rest of the string. This helps prevent problems where Bash can't tell where the name of the variable ends and the next part of the string begins.
- Use environment variables when redirecting to "/etc/etcd.env".
- Add more placeholder values for flags in "etcd.service" -> "ExecStart"
Fixeskubernetes/kubeadm#797
First, fix https:// address.
Secondly, previous formatting would display on the page as one line
altogether, which couldn't be pasted into a terminal correctly.
Before running `kubeadm init` users should be informed that the command might change depending on the network plugins they choose. It is better to provide it before presenting with `kubeadm init` so that they don't have to tear the cluster apart once they figure out they needed some extra parameters while running the command
* Container Linux doc fixes
portions of the URLs were missing their bash substitutions and the variable exports don't apply to the following commands without using 'export'
* Adjustments from PR
export is not needed, used proper bash expansion
* typos
RA489
Samuel Kihahu
chentanjun
yacinelazaar
Alejandro Huertas Herrero
Oleg Butuzov
SataQiu
vasu1124
Luzhenxing
Dr Nic Williams
Will McGregor
vanou
Alberto Roura
Chris McInerney
Fabrizio Pandini
Yuk, Yongsu
Armando Migliaccio
Mitesh Jain
shub-asa1
Dax McDonald
Duffie Cooley
Yushiro FURUKAWA
Sascha Grunert
avigailof
Jesse Glick
Alexander Sowitzki
James Peach
Steven Correa
mohamed chiheb ben jemaa
Toni Tauro
Rafael Fernández López
Nikhita Raghunath
bjpaul
Tim Bannister
Song Shukun
simplytunde
Mark Janssen
Cheng Pan
Vedran Lerenc
David Schott
Deep Debroy
Lubomir I. Ivanov
Edwin
houjun
Yoon
aimeeu
Claudiu Belu
codyc
Tahmid Shakil
James
Michael Vorburger ⛑️
Strajan Sebastian Ioan
sNathan13
Damien Duportal
Stuart P. Bentley
yunxji
Alex Punnen
Andreas Jaekel
Tamas Ecsedi
Ismail Alidzhikov
Elton Stoneman
Patrick Lang
mhamdi semah
Hypo
Barnabas Makonda
Dennis Periquet
icheikhrouhou
Deepak Punjabi
pytimer
Nate Taber
MAKOSCAFEE
Rajakavitha1
Jingfang Liu
Robert Krawitz
Weiliang Li
Rostislav M. Georgiev
Jordan Liggitt
rchowson
André Martins
Casey Davenport
Timoses
Marko Mudrinić
Leah Hanson
Travis Merkel
Stacy Pedersen
Oleg Chunikhin
Mario Groß
shavidissa
Harshvardhan Karn
Rob Hirschfeld
Meenakshi Kaushik
Zach Corleissen
Rajesh Deshpande
Boskey Savla
Maaryaams
Dmitriy Lushnikov
Himanshu Pandey
Kohei Toyoda
Phil Businger
Marek Counts
Martynas Pumputis
Bill Mulligan
Mark McLoughlin
Quan Tian
Danny Berger
Yuchen
Kibo Hikari
Milo Hartsoe
Lubomir I. Ivanov
Jason L. van Brackel
Arthur De Magalhaes
presto9292
Michael Michael
Daniel Lipovetsky
Kaitlyn Barnard
Shashank Patel
Nick Veitch
Manuel Rüger
yanghaichao12
Roy Lenferink
Kai Paro
Karen Bradshaw
Craig Peters
Jim Angel
Kendrick Coleman
chenrui
YAMAMOTO Takashi
Karthik Gaekwad
Guilherme Steinmüller
Jintao Zhang
Cody Clark
Timothy St. Clair
Gregory Guillou
Andrew Sy Kim
Prince Rachit Sinha
Jonas Rosland
Neha Yadav
Guido García
makocchi
Dani Comnea
Damini Satya
Rastislav Szabo
Art
June Yi
Josie
Jennifer Rondeau
Dan Pastusek
Vineeth Reddy
PingWang
ethan
Evan
Zhou Peng
garlicFrancium
Manjunath A Kumatagi
Harshagarwal19
R
atoato88
SalimGangji
Avi Deitcher
Anuj Sharma
Suraj Deshmukh
Banjot S Chanana
lj8930
Simon Vallebro
Viktors Garkavijs
phillipsio
Vaibhav Paralikar
Dan Kelly
Alan
Prashanth Rajaram
bitbucket90
MengZeLee
Michael Vorburger ⛑️
Dustin Decker
Naoki Oketani
Gagandeep S. Chhabra
lIuDuI
Jordan Liggitt
Duffie Cooley
Bastian Hofmann
Hongzhi
svetkars
gparvind
Stig Otnes Kolstad
Sandeep Rajan
hongkunyoo
Aivars Sterns
Chao Wang
Indradhanush Gupta
Daniel M Barlow
Chenrui.He
Clyde D'Souza
Steve Wong
Luc Perkins
Iain Foulds
KevinTHU
Yuexiao Wang
Martin Hoefling
Stephan Fabel
W. Trevor King
Miguel David
Tommy Hobin
António Meireles
LiuDui
JJ Asghar
Preston Holmes
Shen Yuanyu
Thomas Strömberg
Justin Clift
Kevin Kelani
PatMaz
Brad Topol
Tomáš Kukrál
Rong Zhang
Heng WU
Bob Killen
Sam Foo
CaoShuFeng
Maciej Kwiek
tanshanshan
Eric Tune
Robert Bailey
Masahito Zembutsu
Diógenes Rettori
Paul
yan xuean
ocofaigh
Dwai Banerjee
Kilian Ries
Li Zebang
Yuanbin Chen
Andrew Chen
tvshc
Slava Semushin
Herrmann Hinz
Igor Mameshin
Chuck Ha
Ahmet Alp Balkan
chenhuan
Matt Rickard
Tobias Brunner
Xiao An
Xianglin Gao
Liz
Jari Kolehmainen
Kai Chen
Yujun Zhang
Oleg Atamanenko
Matheus Neder
spinside
Stewart-YU
Sudhakar Rayavaram
dineshb-jnpr
Misty Linville
Benjamin Priestman
Qiming
Mario Kleinsasser
Takeaki Matsumoto
Steve Perry
Nicolaj Græsholt
Guðlaugur Stefán Egilsson
max8899
Jason DeTiberus
mkoderer
Di Xu
Vincent Lainé
Martin Dietze
Tim Fogarty
Takuya Tokuda
Andreas Jaeger
Anubhav
Loïc Albertin
lovejoy
Denis Gladkikh
nhanpc
Chris Hiestand
Daniel Galvez
Nate Bhurinat Wangsutthitham
Daniel Rodriguez
will-chan
Bjørn Erik Pedersen