Errors that were being returned in the checkAlgorithm methods of both wfe and
wfe2 didn't really match up to what was actually being checked. This change
attempts to bring the errors in line with what is actually being tested.
Fixes#4452.
This branch also updates the WFE2 parseJWS function to match the error string fixed in the upstream project for the case where a JWS EC public key fails to unmarshal due to an incorrect length.
Resolves#4300
To make log analysis easier we choose to elevate the pseudo ACME HTTP
method "POST-as-GET" to the `web.RequestEvent.Method` after processing
a valid POST-as-GET request, replacing the "POST" method value that will
have been set by the outermost handler.
Basically a complete re-write/re-design of the forwarding concept introduced in
#4297 (sorry for the rapid churn here). Instead of nonce-services blindly
forwarding nonces around to each other in an attempt to find out who issued the
nonce we add an identifying prefix to each nonce generated by a service. The
WFEs then use this prefix to decide which nonce-service to ask to validate the
nonce.
This requires a slightly more complicated configuration at the WFE/2 end, but
overall I think ends up being a way cleaner, more understandable, easy to
reason about implementation. When configuring the WFE you need to provide two
forms of gRPC config:
* one gRPC config for retrieving nonces, this should be a DNS name that
resolves to all available nonce-services (or at least the ones you want to
retrieve nonces from locally, in a two DC setup you might only configure the
nonce-services that are in the same DC as the WFE instance). This allows
getting a nonce from any of the configured services and is load-balanced
transparently at the gRPC layer.
* a map of nonce prefixes to gRPC configs, this maps each individual
nonce-service to it's prefix and allows the WFE instances to figure out which
nonce-service to ask to validate a nonce it has received (in a two DC setup
you'd want to configure this with all the nonce-services across both DCs so
that you can validate a nonce that was generated by a nonce-service in another
DC).
This balancing is implemented in the integration tests.
Given the current remote nonce code hasn't been deployed anywhere yet this
makes a number of hard breaking changes to both the existing nonce-service
code, and the forwarding code.
Fixes#4303.
Also excises the existing bad padding metrics code, adds a special error for when we encounter badly padded keys, and adds a test for the new special error.
Fixes#4070 and fixes#3964.
This allows POST-as-GET requests to Orders, Authorizations, Challenges, Certificates and Accounts. Legacy GET support remains for Orders, Authorizations, Challenges and Certificates. Legacy "POST {}" support for Accounts remains.
Resolves https://github.com/letsencrypt/boulder/issues/3871
Removes the checks for a handful of deployed feature flags in preparation for removing the flags entirely. Also moves all of the currently deprecated flags to a separate section of the flags list so they can be more easily removed once purged from production configs.
Fixes#3880.
ACME draft-13 changed the inner JWS' body to contain the old key
that signed the outer JWS. Because this is a backwards incompatible
change with the draft-12 ACME v2 key rollover we introduce a new feature
flag `features.ACME13KeyRollover` and conditionally use the old or new
key rollover semantics based on its value.
This commit updates the `wfe2/verify.go` implementation of
`acctIDFromURL` to include the invalid `kid` value being rejected as
part of the rejection error message. This will hopefully help
users/client developers understand the problem faster. Unit tests are
updated accordingly.
While we intended to allow legacy ACME v1 accounts created through the WFE to work with the ACME v2 implementation and the WFE2 we neglected to consider that a legacy account would have a Key ID URL that doesn't match the expected for a V2 account. This caused `wfe2/verify.go`'s `lookupJWK` to reject all POST requests authenticated by a legacy account unless the ACME client took the extra manual step of "fixing" the URL.
This PR adds a configuration parameter to the WFE2 for an allowed legacy key ID prefix. The WFE2 verification logic is updated to allow both the expected key ID prefix and the configured legacy key ID prefix. This will allow us to specify the correct legacy URL in configuration for both staging/prod to allow unmodified V1 ACME accounts to be used with ACME v2.
Resolves https://github.com/letsencrypt/boulder/issues/3674
Many of the probs.XYZ calls are of the form probs.XYZ(fmt.Sprintf(...)).
Convert these functions to take a format string and optional arguments,
following the same pattern used in the errors package. Convert the
various call sites to remove the now redundant fmt.Sprintf calls.
For a long time now the WFE has generated URLs based on the incoming
request rather than a hardcoded BaseURL. BaseURL is no longer set in the
prod configs.
This also allows factoring out relativeEndpoint into the web package.
This commit adds a new WFE2 feature flag "EnforceV2ContentType". When
enabled, the WFE2's validPostRequest function will enforce that the
request carries a Content-Type header equal to
application/jose+json. This is required by ACME draft-10 per section
6.2 "Request Authentication".
This is behind a feature flag because it is likely to break
some number of existing ACMEv2 clients that may not be sending the
correct Content-Type.
We are defaulting to not setting the new feature flag in test/config-next
because it currently break's Certbot's acme module's revocation support
and we rely on this in our V2 integration tests.
Resolves#3529
* Move probs.go to web.
* Move probs_test.go
* Factor out probs.go from wfe
* Move context.go
* Extract context.go into web package.
* Add a constructor for TopHandler.
The ACME specification no longer describes "registrations" since this is
a fairly overloaded term. Instead the term used is "account". This
commit updates the WFE2 & tests throughout to replace occurrences of
"reg" and "registration" to use "acct" and "account".
NOTE: This change is strictly limited to the wfe2 package. E.g. the
RA/SA and many core objects still refer to registrations.
Resolves#2986
This commit implements certificate revocation for the WFE2. This
endpoint differs from others in that it supports *both* traditional key
ID based JWS request authentication in addition to embedded JWK based
JWS request authentication. The first is considered authenticated to
revoke a certificate if the signer account has valid authorizations for
all of the names in the certificate. The second is considered
authenticated if the embedded JWK that signs the request has the same
public key as the certificate being revoked.
Per #3001 we should not be adding new StatsD code for metrics anymore.
This commit updates all of the WFE2 to use 1st class Prometheus stats.
Unit tests are updated accordingly.
I have broken the error stats into two counts:
1. httpErrorCount for all of the http layer client request errors (e.g.
no POST body, no content-length)
2. joseErrorCount, for all of the JOSE layer client request errors (e.g.
malformed JWS, broken signature, invalid JWK)
This commit also removes the stubbed out `TestValidKeyRollover` function
from `wfe2/verify_test.go`. This was committed accidentally and the same
functionality is covered by the `wfe2/wfe_test.go` `TestKeyRollover`
function.
RFC 7515 section 7.2.1 "General JWS JSON Serialization Syntax" describes
an optional "signatures" field that contains an array of JSON objects,
each representing a signature or MAC. ACME only uses the mandatory
"signature" field that contains the BASE64URL of a signature.
We previously checked that the parsed JWS had only one signature and
rejected accordingly but in order to be safe and ensure that nothing is
read from this "signatures" array when we intended to be using the
"signature" field this commit updates the check to explicitly reject the
"signatures" field prior to parsing with go-jose similar to how the
unprotected header is handled.
This PR reworks the original WFE2 JWS post validation code (primarily
from `verifyPOST()` in WFE1) to use the new "ACME v2" style of JWS verification.
For most endpoints this means switching to a style where the JWS does
*not* contain an embedded JWK and instead contains a Key ID that is used
to lookup the JWK to verify the JWS from the database. For some special
endpoints (e.g. new-reg) there is a self-authenticated JWS style that
uses the old method of embedding a JWK instead of using a Key ID
(because no account to reference by ID exists yet).
The JWS validation now lives in `wfe2/verify.go` to keep the main WFEv2
code cleaner. Compared to `verifyPOST` there has been substantial work
done to create smaller easier to test functions instead of one big
validation function. The existing WFE unit tests that were copied to the
WFE2 are largely left as they were (e.g. cruddy) and updated as
minimally as possible to support the new request validation. All tests
for new code were written in a cleaner subtest style. Cleaning up the
existing tests will be follow-up work (See https://github.com/letsencrypt/boulder/issues/2928).
Since the POST validation for the key-change and revocation endpoints
requires special care they were left out of the WFE2 implementation for now
and will return a "not implemented" error if called.
_Note to reviewers_: this is a large diff to `wfe2/wfe.go` and `wfe2/verify.go`
that Github will hide by default. You will need to click to view the diffs.
Resolves https://github.com/letsencrypt/boulder/issues/2858
This PR renames wfe2/jose.go to wfe2/verify.go to better reflect
its purpose.
Additionally this PR moves signatureValidationError, extractJWSKey
and verifyPOST from wfe2/wfe.go to wfe2/verify.go. This is in
preparation of refactoring for the ACME v2 POST verification logic to
help keep diffs reviewable.
Daniel McCarney