If a Redis client is configured for the SA service, OCSP responses created
during a revocation event will be written to Redis on a best effort basis.
Use the OCSP response NextUpdate time as the expiration time for the
redis entry. Change the new issuance OCSP storage to do the same.
Fixes#5888
Simplify the WFE `RevokeCertificate` API method in three ways:
- Remove most of the logic checking if the requester is authorized to
revoke the certificate in question (based on who is making the
request, what authorizations they have, and what reason they're
requesting). That checking is now done by the RA. Instead, simply
verify that the JWS is authenticated.
- Remove the hard-to-read `authorizedToRevoke` callbacks, and make the
`revokeCertBySubscriberKey` (nee `revokeCertByKeyID`) and
`revokeCertByCertKey` (nee `revokeCertByJWK`) helpers much more
straight-line in their execution logic.
- Call the RA's new `RevokeCertByApplicant` and `RevokeCertByKey` gRPC
methods, rather than the deprecated `RevokeCertificateWithReg`.
This change, without any flag flips, should be invisible to the
end-user. It will slightly change some of our log message formats.
However, by now relying on the new RA gRPC revocation methods, this
change allows us to change our revocation policies by enabling the
`AllowDoubleRevocation` and `MozRevocationReasons` feature flags, which
affect the behavior of those new helpers.
Fixes#5936
Adds a rocsp redis client to the sa if cluster information is provided in the
sa config. If a redis cluster is configured, all new certificate OCSP
responses added with sa.AddPrecertificate will attempt to be written to
the redis cluster, but will not block or fail on errors.
Fixes: #5871
Add two new gRPC methods to the SA:
- `RevokeCertByKey` will be used when the API request was signed by the
certificate's keypair, rather than a Subscriber keypair. If the
request is for reason `keyCompromise`, it will ensure that the key is
added to the blocked keys table, and will attempt to "re-revoke" a
certificate that was already revoked for some other reason.
- `RevokeCertByApplicant` supports both the path where the original
subscriber or another account which has proven control over all of the
identifier in the certificate requests revocation via the API. It does
not allow the requested reason to be `keyCompromise`, as these
requests do not represent a demonstration of key compromise.
In addition, add a new feature flag `MozRevocationReasons` which
controls the behavior of these new methods. If the flag is not set, they
behave like they have historically (see above). If the flag is set to true,
then the new methods enforce the upcoming Mozilla policies around
revocation reasons, namely:
- Only the original Subscriber can choose the revocation reason; other
clients will get a set reason code based on the method of requesting
revocation. When the original Subscriber requests reason
`keyCompromise`, this request will be honored, but the key will not be
blocked and other certificates with that key will not also be revoked.
- Revocations signed with the certificate key will always get reason
`keyCompromise`, because we do not know who is sending the request and
therefore must assume that the use of the key in this way represents
compromise. Because these requests will always be fore reason
`keyCompromise`, they will always be added to the blocked keys table
and they will always attempt "re-revocation".
- Revocations authorized via control of all names in the cert will
always get reason `cessationOfOperation`, which is to be used when the
original Subscriber does not control all names in the certificate
anymore.
Finally, update the existing `AdministrativelyRevokeCertificate` method
to use the new helper functions shared by the two new methods.
Part of #5936
We have decided that we don't like the if err := call(); err != nil
syntax, because it creates confusing scopes, but we have not cleaned up
all existing instances of that syntax. However, we have now found a
case where that syntax enables a bug: It caused readers to believe that
a later err = call() statement was assigning to an already-declared err
in the local scope, when in fact it was assigning to an
already-declared err in the parent scope of a closure. This caused our
ineffassign and staticcheck linters to be unable to analyze the
lifetime of the err variable, and so they did not complain when we
never checked the actual value of that error.
This change standardizes on the two-line error checking syntax
everywhere, so that we can more easily ensure that our linters are
correctly analyzing all error assignments.
Incidents of key compromise where proof is supplied in the form of a private key
have historically been labor intensive for SRE. This PR seeks to automate the
process of embedded public key validation , query for issuance, revocation, and
blocking by SPKI hash.
For an example of private keys embedding a mismatched public key, see:
https://blog.hboeck.de/archives/888-How-I-tricked-Symantec-with-a-Fake-Private-Key.html.
Adds two new sub-commands (private-key-block and private-key-revoke) and one new
flag (-dry-run) to admin-revoker. Both new sub-commands validate that the
provided private key and provide the operator with an issuance count. Any
blocking and revocation actions are gated by the new '-dry-run' flag, which is
'true' by default.
private-key-block: if -dry-run=false, will immediately block issuance for the
provided key. The operator is informed that bad-key-revoker will eventually
revoke any certificates using the provided key.
private-key-revoke: if -dry-run=false, will revoke all certificates using the
provided key and then blocks future issuance. This avoids a race with the
bad-key-revoker. This command will execute successfully even if issuance for the
provided key is already blocked.
- Add support for blocking issuance by private key to admin-revoker
- Add support for revoking certificates by private key to admin-revoker
- Create new package called 'privatekey'
- Move private key loading logic from 'issuance' to 'privatekey'
- Add embedded public key verification to 'privatekey'
- Add new field `skipBlockKey` to `AdministrativelyRevokeCertificate` protobuf
- Add check in RA to ensure that only KeyCompromise revocations use
`skipBlockKey`
Fixes#5785
Add `stylecheck` to our list of lints, since it got separated out from
`staticcheck`. Fix the way we configure both to be clearer and not
rely on regexes.
Additionally fix a number of easy-to-change `staticcheck` and
`stylecheck` violations, allowing us to reduce our number of ignored
checks.
Part of #5681
These gRPC methods were only used by the ACMEv1 code paths.
Now that boulder-wfe has been fully removed, we can be confident
that no clients ever call these methods, and can remove them from
the gRPC service interface.
Part of #5816
Running an older version (v0.0.1-2020.1.4) of `staticcheck` in
whole-program mode (`staticcheck --unused.whole-program=true -- ./...`)
finds various instances of unused code which don't normally show up
as CI issues. I've used this to find and remove a large chunk of the
unused code, to pave the way for additional large deletions accompanying
the WFE1 removal.
Part of #5681
Empty the bodies of the WFE's and RA's `NewAuthorization` methods. These
were used exclusively by the ACMEv1 flow. Also remove any helper functions
which were used exclusively by this code, and any tests which were testing
exclusively this code and which have equivalent tests for the ACMEv2 flow.
Greatly simply `SA.GetAuthorizations2`, as it no longer has to contend with
there being two different kinds of authorizations in the database. Add a few
TODOs to consider removing a few other SA gRPC methods which no longer
have any callers.
Part of #5681
The NewCertificate codepath was the ACME v1 API's equivalent of
the modern Finalize endpoint. Remove the bodies of the WFE's and
the RA's `NewCertificate` functions. Remove the functions which were
called only from those functions. One of the removed functions is the
old `checkAuthorizations`, so update some tests which were calling
that directly to instead use different entry points.
Part of #5681
These hashes are useful for OCSP computations, as they are the two
values that are used to uniquely identify the issuer of the given cert in
an OCSP request. Here, they are restricted to SHA1 only, as Boulder
only supports SHA1 for OCSP, as per RFC 5019.
In addition, because the `ID`, `NameID`, `NameHash`, and `KeyHash`
are relatively expensive to compute, introduce a new constructor for
`issuance.Certificate` that computes all four values at startup time and
then simply returns the precomputed values when asked.
Today, the revocation codepaths involve parsing the to-be-revoked
certificate multiple times: inside `admin-revoker` itself, inside the
RA's `AdministrativelyRevokeCertificate` method, and again in its helper
`revokeCertificate`. In addition, we use the fact that we have the full
certificate multiple times: to log various attributes of it, to compute
its `IssuerNameID`, and more. All of this will fail if we ever issue a
cert that is malformed to the point that it cannot be parsed.
Add a new argument to the `AdministrativelyRevokeCertificateRequest`
that allows the certificate to be identified by serial only, instead of
by full certificate bytes. Add support for this in the gRPC handler by
using the serial to construct a dummy in-memory Certificate object.
Support this in the `revokeCertificate` codepath by checking to see if
the passed-in cert has any underlying raw DER bytes, and if not,
triggering the new codepath that does everything via the serial.
In order to support this, unfortunately we have to add a second
in-memory map to the RA, so that it can look up issuer certs by either
name ID or old-style ID, as the IDs gleaned from the database (instead
of from the cert itself) may still be old-style. This will be removed
when the old-style Issuer IDs have aged out.
Fixes#5759
When a valid authorization is stored in the database the authorization
column attemptedAt is set based on the challenge `Validated` value. Use
this value in `checkAuthorizationsCAA` to determine if an authorization
is sufficiently stale to need a recheck of the CAA DNS record. Error if the
time is nil. Keeps old codepath for safety check and increments a metric
if the old codepath is used.
Remove the last of the gRPC wrapper files. In order to do so:
- Remove the `core.StorageGetter` interface. Replace it with a new
interface (whose methods include the `...grpc.CallOption` arg)
inside the `sa/proto/` package.
- Remove the `core.StorageAdder` interface. There's no real use-case
for having a write-only interface.
- Remove the `core.StorageAuthority` interface, as it is now redundant
with the autogenerated `sapb.StorageAuthorityClient` interface.
- Replace the `certificateStorage` interface (which appears in two
different places) with a single unified interface also in `sa/proto/`.
- Update all test mocks to include the `_ ...grpc.CallOption` arg in
their method signatures so they match the gRPC client interface.
- Delete many methods from mocks which are no longer necessary (mostly
because they're mocking old authz1 methods that no longer exist).
- Move the two `test/inmem/` wrappers into their own sub-packages to
avoid an import cycle.
- Simplify the `satest` package to satisfy one of its TODOs and to
avoid an import cycle.
- Add many methods to the `test/inmem/sa/` wrapper, to accommodate all
of the methods which are called in unittests.
Fixes#5600
Overhaul how expiration-mailer checks to see if a `certIsRenewed`.
First, change the helper function to take the list of names (which
can be hashed into an fqdnSet) and the issuance date. This allows the
search for renewals to be a much simpler linear scan rather than an
ugly outer left join. Second, update the query to examine both the
`fqdnSets` and `fqdnSets_old` tables, to account for the fact that
this code cares about more time (~90d) than the `fqdnSets` table
currently holds.
Also export the SA's `HashNames` method so it can be used by the mailer,
and update the mailer's tests to use correct name hashes instead of
fake human-readable hashes.
Fixes#5672
`enforceNameCounts` takes a slice of names as an input and returns a slice
of domain names that are over limit. Return the badNames in the same order
they were input.
Fixes: #5631
Add a new method to the SA's gRPC interface which takes both an Order
and a list of new Authorizations to insert into the database, and adds
both (as well as the various ancillary rows) inside a transaction.
To enable this, add a new abstraction layer inside the `db/` package
that facilitates inserting many rows at once, as we do for the `authz2`,
`orderToAuthz2`, and `requestedNames` tables in this operation.
Finally, add a new codepath to the RA (and a feature flag to control it)
which uses this new SA method instead of separately calling the
`NewAuthorization` method multiple times. Enable this feature flag in
the config-next integration tests.
This should reduce the failure rate of the new-order flow by reducing
the number of database operations by coalescing multiple inserts into a
single multi-row insert. It should also reduce the incidence of new
authorizations being created in the database but then never exposed to
the subscriber because of a failure later in the new-order flow, both by
reducing failures overall and by adding those authorizations in a
transaction which will be rolled back if there is a later failure.
Fixes#5577
* Make `sa.SetOrderError` passthrough.
* Create new proto message `sapb.SetOrderErrorRequest`
that includes only the order id and error to avoid passing around
unnecessary fields of an order.
Part of: #5533
* Make `sa.NewOrder` passthrough.
* Create a new proto message `sapb.NewOrderRequest`
that includes only the information needed to store a new order.
Part of: #5533
* Make sa.SetOrderProcessing GRPC wrapper passthrough. Also, change the
server method to accept an `*sapb.OrderRequest{}` (essentially just an
order ID) as the parameter instead of a whole order.
Part of: #5533
- Make `CountRegistrationsByIP` a pass-through
- Make `CountRegistrationsByIPRange` a pass-through
- Make `CountOrders` a pass-through
- Make `CountFQDNSets` a pass-through
- Make `CountPendingAuthorizations2` a pass-through
- Make `CountInvalidAuthorizations2` a pass-through
Fixes#5535
- Make `GetAuthorization2` a pass-through
- Make `GetAuthorizations2` a pass-through
- Make `GetPendingAuthorization2` a pass-through
- Make `GetValidOrderAuthorizations2` a pass-through
- Make `GetValidAuthorizations2` a pass-through
- Make `NewAuthorizations2` a pass-through
- Make `FinalizeAuthorization2` a pass-through
- Make `DeactivateAuthorization2` a pass-through
Fixes#5534
Make the gRPC wrappers for the SA's `AddCertificate`,
`AddPrecertificate`, `AddSerial`, and `RevokeCertificate`
methods simple pass-throughs.
Fixup a couple tests that were passing only because their
requests to in-memory SA objects were not passing through
the wrapper's consistency checks.
Part of #5532
- Move `DeactivateAuthorization` logic from `grpc` to `ra` and `wfe`
- Update `ra` mocks in `wfe` tests
- Remove unnecessary marshalling between `core.Authorization` and
`corepb.Authorization` in `ra` tests.
Fixes#5562
Remove all error checking and type transformation from the gRPC wrappers
for the following methods on the SA:
- GetRegistration
- GetRegistrationByKey
- NewRegistration
- UpdateRegistration
- DeactivateRegistration
Update callers of these methods to construct the appropriate protobuf
request messages directly, and to consume the protobuf response messages
directly. In many cases, this requires changing the way that clients
handle the `Jwk` field (from expecting a `JSONWebKey` to expecting a
slice of bytes) and the `Contacts` field (from expecting a possibly-nil
pointer to relying on the value of the `ContactsPresent` boolean field).
Implement two new methods in `sa/model.go` to convert directly between
database models and protobuf messages, rather than round-tripping
through `core` objects in between. Delete the older methods that
converted between database models and `core` objects, as they are no
longer necessary.
Update test mocks to have the correct signatures, and update tests to
not rely on `JSONWebKey` and instead use byte slices.
Fixes#5531
- Move `AdministrativelyRevokeCertificate` logic from `grpc` to `ra`
- Test new error conditions in `ra/ra_test.go`
- Update `ra` mocks in `wfe` tests
Fixes#5529
This changeset adds a second DB connect string for the SA for use in
read-only queries that are not themselves dependencies for read-write
queries. In other words, this is attempting to only catch things like
rate-limit `SELECT`s and other coarse-counting, so we can potentially
move those read queries off the read-write primary database.
It also adds a second DB connect string to the OCSP Updater. This is a
little trickier, as the subsequent `UPDATE`s _are_ dependent on the
output of the `SELECT`, but in this case it's operating on data batches,
and a few seconds' replication latency are several orders of magnitude
below the threshold for update frequency, so any certificates that
aren't caught on run `n` can be caught on run `n+1`.
Since we export DB metrics to Prometheus, this also refactors
`InitDBMetrics` to take a DB Address (host:port tuple) and User out of
the DB connection DSN and include those as labels in the metrics.
Fixes#5550Fixes#4985
Update the RA to specify the IssuerNameID rather than the IssuerID when
requesting that the CA generate a new OCSP response for a revoked
certificate.
Depends on #5515
Part of #5152
In go1.17, the `x509.CreateCertificate()` method fails if the provided
Signer (private key) and Parent (cert with public key) do not match.
This change both updates the lint library to create and use an issuer
cert whose public key matches the throwaway private key used for lint
signatures, and overhauls its public interface for readability and
simplicity.
Rename the `lint` library to `linter`, to allow other methods to be
renamed to reduce word repetition. Reduce the linter library interface
to three functions: `Check()`, `New()`, and `Linter.Check()` by making
all helper functions private. Refactor the top-level `Check()` method to
rely on `New()` and `Linter.Check()` behind the scenes. Finally, create
a new helper method for creating a lint issuer certificate, call this
new method from `New()`, and store the result in the `Linter` struct.
Part of #5480
- Move response validation from `RA` client wrapper to `WFE` and `WFE2`
- Move request validation from `RA` server wrapper to `RA`
- Refactor `RA` tests to construct valid `core.Authorization` objects
- Consolidate multiple error declarations to global `errIncompleteGRPCRequest`
Fixes#5439
Create script which finds every .proto file in the repo and correctly
invokes `protoc` for each. Create a single file with a `//go:generate`
directive to invoke the new script. Delete all of the other generate.go
files, so that our proto generation is unified in one place.
Fixes#5453
Replace `core.Empty` with `google.protobuf.Empty` in all of our gRPC
methods which consume or return an empty protobuf. The golang core
proto libraries provide an empty message type, so there is no need
for us to reinvent the wheel.
This change is backwards-compatible and does not require a special
deploy. The protobuf message descriptions of `core.Empty` and
`google.protobuf.Empty` are identical, so their wire-formats are
indistinguishable and therefore interoperable / cross-compatible.
Fixes#5443
Update the signature of the RA's RevokeCertificateWithReg
method to exactly match that of the gRPC method it implements.
Remove all logic from the `RevokeCertificateWithReg` client
and server wrappers. Move the small amount of checking they
were performing directly into the server implementation.
Fixes#5440
Andrew Gabbitas