Adds SCT embedding to the certificate issuance flow. When a issuance is requested a precertificate (the requested certificate but poisoned with the critical CT extension) is issued and submitted to the required CT logs. Once the SCTs for the precertificate have been collected a new certificate is issued with the poison extension replace with a SCT list extension containing the retrieved SCTs.
Fixes#2244, fixes#3492 and fixes#3429.
Previously we introduced the concept of a "pending orders per account
ID" rate limit. After struggling with making an implementation of this
rate limit perform well we reevaluated the problem and decided a "new
orders per account per time window" rate limit would be a better fit for
ACMEv2 overall.
This commit introduces the new newOrdersPerAccount rate limit. The RA
now checks this before creating new pending orders in ra.NewOrder. It
does so after order reuse takes place ensuring the rate limit is only
applied in cases when a distinct new pending order row would be created.
To accomplish this a migration for a new orders field (created) and an
index over created and registrationID is added. It would be possible to
use the existing expires field for this like we've done in the past, but that
was primarily to avoid running a migration on a large table in prod. Since
we don't have that problem yet for V2 tables we can Do The Right Thing
and add a column.
For deployability the deprecated pendingOrdersPerAccount code & SA
gRPC bits are left around. A follow-up PR will be needed to remove
those (#3502).
Resolves#3410
This commit resolves the case where an error during finalization occurs.
Prior to this commit if an error (expected or otherwise) occurred after
setting an order to status processing at the start of order
finalization the order would be stuck processing forever.
The SA now has a `SetOrderError` RPC that can be used by the RA to
persist an error onto an order. The order status calculation can use
this error to decide if the order is invalid. The WFE is updated to
write the error to the order JSON when displaying the order information.
Prior to this commit the order protobuf had the error field as
a `[]byte`. It doesn't seem like this is the right decision, we have
a specific protobuf type for ProblemDetails and so this commit switches
the error field to use it. The conversion to/from `[]byte` is done with
the model by the SA.
An integration test is included that prior to this commit left an order
in a stuck processing state. With this commit the integration test
passes as expected.
Resolves https://github.com/letsencrypt/boulder/issues/3403
This PR is a rework of what was originally https://github.com/letsencrypt/boulder/pull/3382, integrating the design feedback proposed by @jsha: https://github.com/letsencrypt/boulder/pull/3382#issuecomment-359912549
This PR removes the stored Order status field and replaces it with a value that is calculated on-the-fly by the SA when fetching an order, based on the order's associated authorizations.
In summary (and order of precedence):
* If any of the order's authorizations are invalid, the order is invalid.
* If any of the order's authorizations are deactivated, the order is deactivated.
* If any of the order's authorizations are pending, the order is pending.
* If all of the order's authorizations are valid, and there is a certificate serial, the order is valid.
* If all of the order's authorizations are valid, and we have began processing, but there is no certificate serial, the order is processing.
* If all of the order's authorizations are valid, and we haven't processing, then the order is pending waiting a finalization request.
This avoids having to explicitly update the order status when an associated authorization changes status.
The RA's implementation of new-order is updated to only reuse an existing order if the calculated status is pending. This avoids giving back invalid or deactivated orders to clients.
Resolves#3333
This PR implements order finalization for the ACME v2 API.
In broad strokes this means:
* Removing the CSR from order objects & the new-order flow
* Adding identifiers to the order object & new-order
* Providing a finalization URL as part of orders returned by new-order
* Adding support to the WFE's Order endpoint to receive finalization POST requests with a CSR
* Updating the RA to accept finalization requests and to ensure orders are fully validated before issuance can proceed
* Updating the SA to allow finding order authorizations & updating orders.
* Updating the CA to accept an Order ID to log when issuing a certificate corresponding to an order object
Resolves#3123
For the new-order endpoint only. This does some refactoring of the order of operations in `ra.NewAuthorization` as well in order to reduce the duplication of code relating to creating pending authorizations, existing tests still seem to work as intended... A close eye should be given to this since we don't have integration tests yet that test it end to end. This also changes the inner type of `grpc.StorageAuthorityServerWrapper` to `core.StorageAuthority` so that we can avoid a circular import that is created by needing to import `grpc.AuthzToPB` and `grpc.PBToAuthz` in `sa/sa.go`.
This is a big change but should considerably improve the performance of the new-order flow.
Fixes#2955.
This commit replaces the Boulder dependency on
gopkg.in/square/go-jose.v1 with gopkg.in/square/go-jose.v2. This is
necessary both to stay in front of bitrot and because the ACME v2 work
will require a feature from go-jose.v2 for JWS validation.
The largest part of this diff is cosmetic changes:
Changing import paths
jose.JsonWebKey -> jose.JSONWebKey
jose.JsonWebSignature -> jose.JSONWebSignature
jose.JoseHeader -> jose.Header
Some more significant changes were caused by updates in the API for
for creating new jose.Signer instances. Previously we constructed
these with jose.NewSigner(algorithm, key). Now these are created with
jose.NewSigner(jose.SigningKey{},jose.SignerOptions{}). At present all
signers specify EmbedJWK: true but this will likely change with
follow-up ACME V2 work.
Another change was the removal of the jose.LoadPrivateKey function
that the wfe tests relied on. The jose v2 API removed these functions,
moving them to a cmd's main package where we can't easily import them.
This function was reimplemented in the WFE's test code & updated to fail
fast rather than return errors.
Per CONTRIBUTING.md I have verified the go-jose.v2 tests at the imported
commit pass:
ok gopkg.in/square/go-jose.v2 14.771s
ok gopkg.in/square/go-jose.v2/cipher 0.025s
? gopkg.in/square/go-jose.v2/jose-util [no test files]
ok gopkg.in/square/go-jose.v2/json 1.230s
ok gopkg.in/square/go-jose.v2/jwt 0.073s
Resolves#2880
This PR introduces a new feature flag "IPv6First".
When the "IPv6First" feature is enabled the VA's HTTP dialer and TLS SNI
(01 and 02) certificate fetch requests will attempt to automatically
retry when the initial connection was to IPv6 and there is an IPv4
address available to retry with.
This resolves https://github.com/letsencrypt/boulder/issues/2623
Previously we had `Error` and `ValidationRecords` fields in the `Challenge` protobuf but they were never populated which mean't that when using gRPC these fields wouldn't be sent to the SA from the RA on a `FinalizeAuthorization` call. This change populates those fields and updates the PB marshaling tests to verify the correct behavior.
Fixes#2514.
Adds a gRPC server to the SA and SA gRPC Clients to the WFE, RA, CA, Publisher, OCSP updater, orphan finder, admin revoker, and expiration mailer.
Also adds a CA gRPC client to the OCSP Updater which was missed in #2193.
Fixes#2347.
This commit updates the `go-jose` dependency to [v1.1.0](https://github.com/square/go-jose/releases/tag/v1.1.0) (Commit: aa2e30fdd1fe9dd3394119af66451ae790d50e0d). Since the import path changed from `github.com/square/...` to `gopkg.in/square/go-jose.v1/` this means removing the old dep and adding the new one.
The upstream go-jose library added a `[]*x509.Certificate` member to the `JsonWebKey` struct that prevents us from using a direct equality test against two `JsonWebKey` instances. Instead we now must compare the inner `Key` members.
The `TestRegistrationContactUpdate` function from `ra_test.go` was updated to populate the `Key` members used in testing instead of only using KeyID's to allow the updated comparisons to work as intended.
The `Key` field of the `Registration` object was switched from `jose.JsonWebKey` to `*jose.JsonWebKey ` to make it easier to represent a registration w/o a Key versus using a value with a nil `JsonWebKey.Key`.
I verified the upstream unit tests pass per contributing.md:
```
daniel@XXXXX:~/go/src/gopkg.in/square/go-jose.v1$ git show
commit aa2e30fdd1fe9dd3394119af66451ae790d50e0d
Merge: 139276c e18a743
Author: Cedric Staub <cs@squareup.com>
Date: Thu Sep 22 17:08:11 2016 -0700
Merge branch 'master' into v1
* master:
Better docs explaining embedded JWKs
Reject invalid embedded public keys
Improve multi-recipient/multi-sig handling
daniel@XXXXX:~/go/src/gopkg.in/square/go-jose.v1$ go test ./...
ok gopkg.in/square/go-jose.v1 17.599s
ok gopkg.in/square/go-jose.v1/cipher 0.007s
? gopkg.in/square/go-jose.v1/jose-util [no test files]
ok gopkg.in/square/go-jose.v1/json 1.238s
```
Roland Bracewell Shoemaker
Daniel McCarney
Jacob Hoffman-Andrews
Kane York