The router's cache has no means to evict unused entries when capacity is
reached.
This change does the following:
- Wraps cache values in a smart pointer that tracks the last time of
access for each entry. The smart pointer updates the access time when
the reference to entry is dropped.
- When capacity is not available, all nodes that have not been accessed
within some minimal idle age are dropped.
Accesses and updates to the map are O(1) when capacity is available.
Reclaiming capacity is O(n), so it's expected that the router is
configured with enough capacity such that capacity need not be reclaimed
usually.
The router's `Inner` type contains a map of routes. Recently, this map's
capacity has become constrained to prevent leakage for long-running
processes.
This change prepares for a fuller LRU implementation by moving the
router's `Inner` type to a new (tested) module, `cache`.
The router stores its cache and `Recognize` implementation within a `Mutex`,
but there is no need for the recognizer to be locked.
This change creates a new `Cache` type that is locked independently of
`Recognize`. In order to accomplish this, `Recognize::bind_service` has
been changed to take an immutable reference to its `self`.
The (unused) `Single` type has been removed because it relied on
`bind_service` being mutable.
The goals of this change are:
1. Reduce the size/complexity of `control::discovery` in order to ease code reviews.
2. Extract a reusable grpc streaming utility.
There are no intended functional changes.
`control::discovery::DestinationServiceQuery` is used to track the state of a request (and
streaming response) to the destination service. Very little of this logic is specific to
the destination service.
The `DestinationServiceQuery` and associated `UpdateRx` type have been moved to a new
module, `control::remote_stream`, as `Remote` and `Receiver`, respectively. Both of these
types are generic over the gRPC message type, so it will be possible to use this utility
with additional API endpoints.
The `Receiver::poll` implementation has been simplified to be more idiomatic with the rest
of our code (namely, using `try_ready!`).
Configuration values that take durations are currently specified as
time values with no units. So `600` may mean 600ms in some contexts and
10 minutes in others.
In order to avoid this problem, this change now requires that
configurations provide explicit units for time values such as '600ms' or
10 minutes'.
Fixes#27.
It's easy to misconfigure default durations, since they're recorded as
integers and converted to Durations separately.
Now, all default constants that represent durations use const `Duration`
instances (enabled by a recent Rust release).
This fixes#905 which was caused by using the wrong time unit for the
metrics retain time.
PR #898 introduces capacity limits to the balancer. However, because the
router supports "single-use" routes--routes that are bound only for the
life of a single HTTP1 request--it is easy for a router to exceed its
configured capacity.
In order to fix this, the `Reuse` type is removed from the router
library so that _all_ routes are considered cacheable. It's now the
responsibility of the bound service to enforce policies with regards to
client retention.
Routes were not added to the cache when the service could not be used to
process more than a single request. Now, `Bind` wraps its returned
services (via the `Binding` type), that dictate whether a single client
is reused or if one is bound for each request.
This enables all routes to be cached without changing behavior with
regards to connection reuse.
Currently, the proxy may cache an unbounded number of routes. In order
to prevent such leaks in production, new configurations are introduced
to limit the number of inbound and outbound HTTP routes. By default, we
support 100 inbound routes and 10K outbound routes.
In a followup, we'll introduce an eviction strategy so that capacity can
be reclaimed gracefully.
The Router's primary `call` implementation is somewhat difficult to
follow.
This change does not introduce any functional changes, but makes the
function easier to reason about.
This is being done in preparation for functional changes.
This PR adds unit tests for `metrics::record`, based on the benchmarks for the
same function. Currently, there is a test that fires a single response end event
and asserts that the metrics state is correct afterward, and a test that fires
all the events to simulate a full connection lifetime, and asserts that the
metrics state is correct afterward. I'd like to also add a test that simulates
multiple events with different labels, but I'll add that in a subsequent PR,
In order to add these tests, it was necessary to to add test-only accessors
to make some `metrics` structs `pub`` so that the test can access them.
I also added some test-only functions to `metrics::Histogram`s, to make
them easier to make assertions about.
The proxy's tap server assigns a sequential numeric ID to each inbound
Tap request to assist tap lifecycle management.
The server implementation keeps a local counter to keep track of tap
IDs. However, this implementation is cloned for each individual tap
requests, so `0` the only tap ID ever used.
This change moves the Tap ID to be stored in a shared atomic integer.
Debug logging has been improved as well.
The proxy is now configured with the CONDUIT_PROXY_METRICS_RETAIN_IDLE
environment variable that dictates the amount of time that the proxy will retain
metrics that have not been updated.
A timestamp is maintained for each unique set of labels, indicating the last time
that the scope was updated. Then, when metrics are read, all metrics older than
CONDUIT_PROXY_METRICS_RETAIN_IDLE are dropped from the stats registry.
A ctx::test_utils module has been added to aid testing.
Fixes#819
Previously, we maintained a map of labels for each metric. Because the same keys are used
in multiple scopes, this causes redundant hashing & map lookup when updating metrics.
With this change, there is now only one map per unique label scope and all of the metrics
for each scope are stored in the value. This makes metrics inserting faster and prepares
for eviction of idle metrics.
The Metric type has been split into Metric, which now only holds metric metadata and is
responsible for printing a given metric, and Scopes which holds groupings of metrics by
label.
The metrics! macro is provided to make it easy to define Metric instances statically.
In order to set up for a refactor that removes the `Metric` type, the
`FmtMetric` trait--implemented by `Counter`, `Gauge`, and
`Histogram`--is introduced to push prometheus formatting down into each
type.
With this change, the `Histogram` type now relies on `Counter` (and its
metric formatting) more heavily.
This PR removes the `Arc`s from the various label types in the proxy's
`metrics` modules. This should make the write side of the metrics code
much more efficient (and makes the code much simpler! :D).
This change was particularly easy to implement for the TCP `TransportLabels`
and `TransportCloseLabels`, which consisted of only `struct`s and `enum`s,
and could easily be changed to derive `Copy`.
For protocol-level `RequestLabels`, the request's authority was a `String`,
which still needs to be reference-counted, as the overhead of cloning `String`s
is almost certainly worse than that added by ref-counting. However, rather than
adding an additional `Arc<str>`, I changed `RequestLabels` to store the
authority as a `http::uri::Authority`, which is backed by a `ByteStr` and thus
already ref-counted. Now, when constructing `RequestLabels`, we just take
another reference to the `Authority` already stored in the request context.
Since `Authority` implements `fmt::Display` already, formatting the labels
still works.
`ResponseLabels` already store the `DstLabels` string in an `Arc`, so no
additional changes there were necessary. By removing the outer `Arc` around
`ResponseLabels`, we now only have to ref-count the portion of the label type
that would actually be inefficient to clone.
@olix0r ran the benchmarks from #874 against this branch, and it seems to be
a small but noticeable improvement:
```
test record_many_dsts ... bench: 151,076 ns/iter (+/- 182,151)
test record_one_conn_request ... bench: 1,599 ns/iter (+/- 209)
test record_response_end ... bench: 676 ns/iter (+/- 144)
```
before:
```
test record_many_dsts ... bench: 158,403 ns/iter (+/- 130,241)
test record_one_conn_request ... bench: 1,823 ns/iter (+/- 1,408)
test record_response_end ... bench: 547 ns/iter (+/- 70)
```
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
Before changing the telemetry implementation, we should have a means to
understand the impacts of such changes.
To run, you must use a nightly toolchain:
```
rustup run nightly cargo bench -p conduit-proxy -- record
```
This PR adds the unit tests for the proxy metrics module's Histogram
implementation that I wrote in #775 to @olix0r's Histogram implementation
added in #868. The tests weren't too difficult to adapt for the new code,
and everything seems to work correctly!
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
In order to support histograms measured in, for instance, microseconds,
Histogram should blind store integers without being aware of the unit.
In order to accomplish this, we make `Histogram` generic over a `V:
Into<u64>`, such that all values added to the histogram must be of type
`V`.
In doing this, we also make the histogram buckets configurable, though
we maintain the same defaults used for latency values.
The `Histogram` type has been moved to a new module, and the `Bucket`
and `Bounds` helper types have been introduced to help make histogram
logic clearer and latency-agnostic.
In case there are any errors while peeking the connection to do protocol
detection, the sensors will now be in place to detect them. Besides just
errors, this will also allow reporting about connections that are
accepted, but then immediately closed.
Additionally:
- add write_buf implementation for Transport sensor, can help
performance for http1/http2
- add better logs for tcp connections errors
- add printlns for when tests fail
Signed-off-by: Sean McArthur <sean@seanmonstar.com>
In preparation for a larger metrics refactor, this change splits the
Counter and Gauge types into their own modules.
Furthermore, this makes the minor change to these types: incr() and
decr() no longer return `self`. We were not actually ever using the
returned self references, and I find the unit return type to more
obviously indicate the side-effecty-ness of these calls. #smpfy
Previously, the proxy exposed separate _accept_ and _connect_ metrics
for some metric types, but not for all. This leads to confusing
aggregations, particularly for read and write taotals.
This change primarily introduces the `peer` prometheus label (with
possible values _src_ or _dst_) to indicate which side of the proxy the
metric reflects.
Additionally, the `received_bytes` and `sent_bytes` metrics have been
renamed as `tcp_read_bytes_total` and `tcp_write_bytes_total`,
resectively. This more naturally fits into existing idioms. Stream
classification is not applied to these metrics, as we plan to increment
them throughout stream lifetime and not only on close.
The `tcp_connections_open` metric has also been renamed to
`tcp_open_connections` to reflect Prometheus idioms.
Finally, `msg1` and `msg2` have been constified in telemetry test
fixtures so that tests are somewhat easier to read.
trust-dns-resolver is a more complete implementation. In particular,
it supports CNAMES correctly, which is needed for PR #764. It also
supports /etc/hosts, which will help with issue #62.
Use the 0.8.2 pre-release since it hasn't been released yet. It was
created at our request.
Signed-off-by: Brian Smith <brian@briansmith.org>
Fixes#846
The proxy `metrics_compression` test contained an assertion that a compressed scrape contained the `request_duration_ms_count` metric. This was chosen completely arbitrarily, and was only intended as an assertion that metrics were updated between compressed scrapes. Unfortunately, that metric was removed in d9112abc933035ba48eabc1e9e5a81b4da0e367f, so when #665 merged to master, this test broke. CI didn't catch this since we don't build merges for PRs --- we should probably (re)enable this in Travis?
This PR fixes the test to assert on a metric that wasn't removed. Sorry for the ❌s!
Closes#598.
According to the Prometheus documentation, metrics export endpoints should support serving metrics compressed using GZIP. I've modified the proxy's `/metrics` endpoint to serve metrics compressed with GZIP when an `Accept-Encoding: gzip` request header is sent.
I've also added a new unit test that attempts to get the proxy's metrics endpoint as GZIP, and asserts that the metrics are decompressed successfully.
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
The `controller` part of the proxy will now use a default, removing the
need to pass the exact same `controller::new().run()` in every test
case.
The TCP server and client will include their socket addresses in some
panics.
Signed-off-by: Sean McArthur <sean@seanmonstar.com>
This PR removes the unused `request_duration_ms` and `response_duration_ms` histogram metrics from the proxy. It also removes them from the `simulate-proxy` script's output, and from `docs/proxy-metrics.md`
Closes#821
Fixes#831.
Proxy metrics tests `transport::inbound_tcp_accept` and `transport::inbound_tcp_duration` are known to be flaky and should be ignored on CI. Note that the outbound versions of these tests were already marked as flaky, so this was almost certainly either an oversight or the result of an incorrect merge.
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
The refactoring of how metrics are formatted in 674ce87588bfe27ee64b5601cfe5b8e3e548dd34 inadvertently introduced a bug that caused the `process_start_time_seconds` metric to be formatted as just a number without the metric name. This causes Prometheus to fail with a parse error rather than accepting the metrics.
I've fixed this issue, and added a unit test to detect regressions in the future.
This PR adds a `classification` label to transport level metrics collected on transport close. Like the `classification` label on HTTP response metrics, the value may be either `"success"` or `"failure"`. The label value is determined based on the `clean` field on the `TransportClose` event, which indicates whether a transport closed cleanly or due to an error.
I've updated the tests for transport-level metrics to reflect the addition of the new label. I'd like to also modify the test support code to allow us to close transports with errors, in order to test that the errors are correctly classified as failures.
Now, the tap server may specify that requests should be matched by destination
label.
For example, if the controller's Destination service returns the labels:
`{"service": "users", "namespace": "prod"}` for an endpoint, then tap would be
able to specify a match like `namespace=prod` to match requests destined to
that namespace.
This branch adds all the transport-level Prometheus metrics as described in #742, with the exception of the `tcp_connections_open` gauge (to be added in a subsequent branch).
A brief description of the metrics added in this branch:
* `tcp_accept_open_total`: counter of the number of connections accepted by the proxy
* `tcp_accept_close_total`: counter of the number of accepted connections that have closed
* `tcp_connect_open_total`: counter of the number of connections opened by the proxy
* `tcp_connect_close_total`: counter of the number of connections opened by the proxy that have been closed.
* `tcp_connection_duration_ms`: histogram of the total duration of each TCP connection (incremented on connection close)
* `sent_bytes`: counter of the total number of bytes sent on TCP connections (incremented on connection close)
* `received_bytes`: counter of the total number of bytes received on TCP connections (incremented on connection close)
These metrics are labeled with the direction (inbound or outbound) and whether the connection was proxied as raw TCP or corresponds to an HTTP request.
Additionally, I've added several proxy tests for these metrics. Note that there are some cases which are currently untested; in particular, while there are tests for the `tcp_accept_close_total` counter, it's more difficult to test the `tcp_connect_close_total` counter, due to connection pooling. I'd like to improve the tests for this code in additional branches.
The Tap API supports key-value labels on endpoint metadata. The proxy was not
setting these labels previously.
In order to add these labels onto tap events, we store the original set of
labels in an `Arc<HashMap>` on `DstLabels`. When tap events are emitted, the
destination' labels are copied from the `DstLabels` into each event.
The `Labeled` middleware is used to add `DstLabels` to each request. Now that
each client context maintains a watch on its endpoint's `DstLabels`, the
`Labeled` middleware can safely be removed.
This has one subtle behavior change: labels are associated with requests
_lazily_, whereas before they were determined _eagerly_. This means that if an
endpoints labels are updated before the telemetry system captures the labels
for the request, it may use the newer labels. Previously, it would only use the
labels at the time that the request originated.
Currently, only the request context holds destination labels. However,
destination labels are more accurately associated with the client context,
since the client context is what tracks the remote peer address (and
destination labels are associated with this address).
No functional changes.
Building on #796, this creates a new `Endpoint` type that wraps `SocketAddr`.
Still, no functional change has been introduced, but this sets up to move
destination labels into the bind stack directly (by adding the labels watch to
the `Endpoint` type).
Currently, the mock controller, which is used in tests, takes all of its
updates a priori, which makes it hard to control when an update occurs within a
test.
Now, the controller exposes a `DstSender`, which wraps an unbounded channel of
destination updates. This allows tests to trigger updates at a specific point
in the test.
In order to accomplish this, the controller's hand-rolled gRPC server
implementation has been discarded in favor of a real gRPC destination service.
This requires that the `controller-grpc` project now builds both clients
and servers for the destination service. Additionally, we now build a tap
client as well (assuming that we'll want to write tests against our tap
server).
Previously, `Bind` required that it bind to `SocketAddr` (and `SocketAddr`
only). This makes it hard to pass additional information from service discovery
into the client's stack.
To resolve this, `Bind` now has an additional `Endpoint` trait-generic type,
and `Bind::bind` accepts an `Endpoint` rather than a `SocketAddr`.
No additional endpoints have been introduced yet. There are no functional
changes in this refactor.
This changes the public api to have a new rpc type, `TapByResource`.
This api supersedes the Tap api. `TapByResource` is richer, more closely
reflecting the proxy's capabilities.
The proxy's Tap api is extended to select over destination labels,
corresponding with those returned by the Destination api.
Now both `Tap` and `TapByResource`'s responses may include destination
labels.
This change avoids breaking backwards compatibility by:
* introducing the new `TapByResource` rpc type, opting not to change Tap
* extending the proxy's Match type with a new, optional, `destination_label` field.
* `TapEvent` is extended with a new, optional, `destination_meta`.
Currently, the request open timestamp, which is used for calculating latency, is captured in the `sensor::http::Http` middleware. However, the sensor middleware is placed fairly low in the stack, below some of the proxy's components that can add measurable latency (e.g. the router).
This PR moves the request_open timestamp out of the `Http` middleware and into a new `TimestampRequestOpen` middleware, which is installed at the top of the stack (before the router). The `TimestampRequestOpen` middleware adds the timestamp as a request extension, so that it can later be consumed by the `Http` sensor to generate the request stats.
By moving the timestamping to the top of the stack, the timestamp should more accurately cover the overhead of the proxy, but a majority of the telemetry work can still be done where it was previously.
I'd like to have included unit tests for this change, but since the expected improvement is in the accuracy of latency measurements, there's no easy way to test this programmatically.
This is a fairly minor refactor to the proxy telemetry tests. b07b554d2bdb4b92a1feeed22a79bd71e87856eb added a `Fixture` in the Destination service labeling tests added in #661 to reduce the repetition of copied and pasted code in those tests. I've refactored most of the other telemetry tests to also use the test fixture. Significantly less code is copied and pasted now.
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
The proxy `telemetry::metrics::prometheus` module was initially added in order to give the Prometheus metrics export code a separate namespace from the controller push metrics. Since the controller push metrics code was removed from the proxy in #616, we no longer need a separate module for the Prometheus-specific metrics code. Therefore, I've moved that code to the root `telemetry::metrics` module, which should hopefully make the proxy source tree structure a little simpler.
This is a fairly trivial refactor.
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
Closes#713. This is a follow-up from #688.
This PR makes a number of refactorings to the proxy's `control::Cache` module and removes all but one of the `clone` calls.
The `CacheChange` enum now contains the changed key and a reference to the changed value when applicable. This simplifies `on_change` functions, which no longer have to take both a tuple of `(K, V)` and a `CacheChange` and can now simply destructure the `CacheChange`, and since the changed value is passed as a reference, the `on_change` function can now decide whether or not it should be cloned. This means that we can remove a majority of the clones previously present here.
I've also rewritten `Cache::update_union` so that it no longer clones values (twice if the cache was invalidated). There's still one `clone` call in `Cache::update_intersection`, but it seems like it will be fairly tricky to remove. However, I've moved the `V: Clone` bound to that function specifically. `Cache::clear` and `Cache::update_union` so that they no longer call `Cache::update_intersection` internally, so they don't need a `V: Clone` bound.
In addition, I've added some unit tests that test that `on_change` is called with the correct `CacheChange`s when key/value pairs are modified.
The tests for label metadata updates from the control plane are flaky on CI. This is likely due to the CI containers not having enough cores to execute the test proxy thread, the test proxy's controller client thread, the mock controller thread, and the test server thread simultaneously --- see #751 for more information.
For now, I'm ignoring these on CI. Eventually, I'd like to change the mock controller code in test support so that we can trigger it to send a second metadata update only after the request has finished.
I think this issue also makes merging #738 a higher priority, so that we can still have some tests running on CI that exercise some part of the label update behaviour.
PR #654 adds pod-based metric labels to the Destination API responses for cluster-local services.
This PR modifies the proxy to actually add these labels to reported Prometheus metrics for outbound requests to local services.
It enhances the proxy's `control::discovery` module to track these labels and add a `LabelRequest` middleware to the service stack built in `Bind` for labeled services. Requests transiting `LabelRequest` are given an `Extension` which contains these labels, which are then added to events produced by the `Sensors` for these requests. When these events are aggregated to Prometheus metrics, the labels are added.
I've also added some tests in `test/telemetry.rs` ensuring that these metrics are added correctly when the Destination service provides labels.
Closes#660
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
- The listener is immediately closed on receipt of a shutdown signal.
- All in-progress server connections are now counted, and the process will
not shutdown until the connection count has dropped to zero.
- In the case of HTTP1, idle connections are closed. In the case of HTTP2,
the HTTP2 graceful shutdown steps are followed of sending various
GOAWAYs.
Previously when the proxy could tell, by parsing, the request-target
is not in the cluster, it would not override the destination. That is,
load balancing would be disabled for such destinations.
With this change, the proxy will do L7 load balancing for all HTTP
services as long as the request-target has a DNS name.
Signed-off-by: Brian Smith <brian@briansmith.org>
No change in behavior is intended here.
Split poll_destination() into two parts, one that operates locally
on the DestinationSet, and the other that operates on data that isn't
wholly local to the DestinationSet. This makes the code easier to
understand. This is being done in preparation for adding DNS fallback
polling to poll_destination().
Signed-off-by: Brian Smith <brian@briansmith.org>
Only the destination service needs normalized names (and even then,
that's just temporary). The rest of the code needs the name as it was
given, except case-normalized (lowercased). Because DNS fallack isn't
implemented in service discovery yet, Outbound still a temporary
workaround using FullyQualifiedName to keep things working; thta will
be removed once DNS fallback is implemented in service discovery.
Signed-off-by: Brian Smith <brian@briansmith.org>
This PR changes the proxy's `control::Cache` module from a set to a key-value map.
This change is made in order to use the values in the map to store metadata from the Destination API, but allow evictions and insertions to be based only on the `SocketAddr` of the destination entry. This will make code in PR #661 much simpler, by removing the need to wrap `SocketAddr`s in the cache in a `Labeled` struct for storing metadata, and the need for custom `Borrow` implementations on that type.
Furthermore, I've changed from using a standard library `HashSet`/`HashMap` as the underlying collection to using `IndexMap`, as we suspect that this will result in performance improvements.
Currently, as `master` has no additional metadata to associate with cache entries, the type of the values in the map is `()`. When #661 merges, the values will actually contain metadata.
If we suspect that there are many other use-cases for `control::Cache` where it will be treated as a set rather than a map, we may want to provide a separate set of impls for `Cache<T, ()>` (like `std::HashSet`) to make the API more ergonomic in this case.
This PR adds the pretty-printing for durations I added in #676 to the panic message from the `assert_eventually!` macro added in #669.
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
No change in behavior is intended here.
Split poll_destination() into two parts, one that operates locally
on the DestinationSet, and the other that operates on data that isn't
wholly local to the DestinationSet. This makes the code easier to
understand. This is being done in preparation for adding DNS fallback
polling to poll_destination().
Signed-off-by: Brian Smith <brian@briansmith.org>
Proxy: Refactor DNS name parsing and normalization
Only the destination service needs normalized names (and even then,
that's just temporary). The rest of the code needs the name as it was
given, except case-normalized (lowercased). Because DNS fallack isn't
implemented in service discovery yet, Outbound still a temporary
workaround using FullyQualifiedName to keep things working; thta will
be removed once DNS fallback is implemented in service discovery.
Signed-off-by: Brian Smith <brian@briansmith.org>
This branch adds simple pretty-printing to duration in log timeout messages. If the duration is >= 1 second, it's printed in seconds with a fractional part. If the duration is less than 1 second, it is printed in milliseconds. This simple formatting may not be sufficient as a formatting rule for all cases, but should be sufficient for printing our relatively small timeouts.
Log messages now look something like this:
```
ERROR 2018-04-04T20:05:49Z: conduit_proxy: turning operation timed out after 100 ms into 500
```
Previously, they looked like this:
```
ERROR 2018-04-04T20:07:26Z: conduit_proxy: turning operation timed out after Duration { secs: 0, nanos: 100000000 } into 500
```
I made this change partially because I wanted to make the panics from the `eventually!` macro added in #669 more readable.
The proxy's `telemetry/metrics/prometheus.rs` file was starting to get long and hard to find one's way around in. I split the prometheus labels code out into a separate submodule and `RequestLabels` and `ResponseLabels` public. This seems like a reasonable division of the code, and the resultant files are much easier to read.
The proxy's control::discovery module is becoming a bit dense in terms
of what it implements.
In order to make this code more understandable, and to be able to use a
similar caching strategy in other parts of the controller, the
`control::cache` module now holds discovery's cache implementation.
This module is only visible within the `control` module, and it now
exposes two new public methods: `values()` and
`set_reset_on_next_modification()`.
* Extracted logic from destination server
* Make tests follow style used elsewhere in the code
* Extract single interface for resolvers
* Add tests for k8s and ipv4 resolvers
* Fix small usability issues
* Update dep
* Act on feedback
* Add pod-based metric_labels to destinations response
* Add documentation on running control plane to BUILD.md
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Fix mock controller in proxy tests (#656)
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
* Address review feedback
* Rename files in the destination package
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
- Adds environment variables to configure a set of ports that, when an
incoming connection has an SO_ORIGINAL_DST with a port matching, will
disable protocol detection for that connection and immediately start a
TCP proxy.
- Adds a default list of well known ports: SMTP and MySQL.
Closes#339
Previosuly, when the proxy was disconnected from the Destination
service and then reconnects, the proxy would not forget old, outdated
entries in its cache of endpoints. If those endpoints had been removed
while the proxy was disconnected then the proxy would never become
aware of that.
Instead, on the first message after a reconnection, replace the entire
set of cached entries with the new set, which may be empty.
Prior to this change, the new test
outbound_destinations_reset_on_reconnect_followed_by_no_endpoints_exists
passed already
but outbound_destinations_reset_on_reconnect_followed_by_add_none
and outbound_destinations_reset_on_reconnect_followed_by_remove_none
failed. Now all these tests pass.
Fixes#573
Signed-off-by: Brian Smith <brian@briansmith.org>
* Proxy: Factor out Destination service connection logic
Centralize the connection initiation logic for the Destination service
to make it easier to maintain. Clarify that the `rx` field isn't needed
prior to a (re)connect.
Signed-off-by: Brian Smith <brian@briansmith.org>
* Rename `rx` to `query`.
Signed-off-by: Brian Smith <brian@briansmith.org>
* "recoonect" -> "reconnect"
Signed-off-by: Brian Smith <brian@briansmith.org>
This PR adds a `classification` label to proxy response metrics, as @olix0r described in https://github.com/runconduit/conduit/issues/634#issuecomment-376964083. The label is either "success" or "failure", depending on the following rules:
+ **if** the response had a gRPC status code, *then*
- gRPC status code 0 is considered a success
- all others are considered failures
+ **else if** the response had an HTTP status code, *then*
- status codes < 500 are considered success,
- status codes >= 500 are considered failures
+ **else if** the response stream failed **then**
- the response is a failure.
I've also added end-to-end tests for the classification of HTTP responses (with some work towards classifying gRPC responses as well). Additionally, I've updated `doc/proxy_metrics.md` to reflect the added `classification` label.
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
In #602, @olix0r suggested that telemetry counters should wrap on overflows, as "most timeseries systems (like prometheus) are designed to handle this case gracefully."
This PR changes counters to use explicitly wrapping arithmetic.
Closes#602.
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
Have the controller tell the client whether the service exists, not
just what are available. This way we can implement fallback logic to
alternate service discovery mechanisms for ambigious names.
Signed-off-by: Brian Smith <brian@briansmith.org>
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
As described in #619. `process_start_time_seconds` is the idiomatic way of reporting to Prometheus the uptime of a process. It should contain the time in seconds since the beginning of the Unix epoch.
The proxy now exports this metric:
```
➜ http get localhost:4191/metrics
HTTP/1.1 200 OK
Content-Length: 902
Content-Type: text/plain; charset=utf-8
Date: Mon, 26 Mar 2018 22:09:55 GMT
# HELP request_total A counter of the number of requests the proxy has received.
# TYPE request_total counter
# HELP request_duration_ms A histogram of the duration of a request. This is measured from when the request headers are received to when the request stream has completed.
# TYPE request_duration_ms histogram
# HELP response_total A counter of the number of responses the proxy has received.
# TYPE response_total counter
# HELP response_duration_ms A histogram of the duration of a response. This is measured from when theresponse headers are received to when the response stream has completed.
# TYPE response_duration_ms histogram
# HELP response_latency_ms A histogram of the total latency of a response. This is measured from whenthe request headers are received to when the response stream has completed.
# TYPE response_latency_ms histogram
process_start_time_seconds 1522102089
```
Closes#619
Use `VecDeqeue` to make the queue structure clear. Follow good practice
by minimizing the amount of time the lock is held. Clarify how
defaulting logic works.
Signed-off-by: Brian Smith <brian@briansmith.org>
The metrics endpoint tests are flaky because there are no guarantees
that the metrics pipeline has processed events before the metrics
endpoint is read. This can cause CI to fail spuriously.
Disable these tests from running in CI until #613 is resolved.
The inject code detects the object it is being injected into, and writes
self-identifying information into the CONDUIT_PROMETHEUS_LABELS
environment variable, so that conduit-proxy may read this information
and report it to Prometheus at collection time.
This change puts the self-identifying information directly into
Kubernetes labels, which Prometheus already collects, removing the need
for conduit-proxy to be aware of this information. The resulting label
in Prometheus is recorded in the form `k8s_deployment`.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
This PR adds the `request_duration_ms` metric to the Prometheus metrics exported by the proxy. It also modifies the `request_total` metric so that it is incremented when a request stream finishes, rather than when it opens, for consistency with how the `response_total` metric is generated.
Making this change required modifying `telemetry::sensors::http` to generate a `StreamRequestEnd` event similar to the `StreamResponseEnd` event. This is done similarly to how sensors are added to response bodies, by generalizing the `ResponseBody` type into a `MeasuredBody` type that can wrap a request or response body. Since this changed the type of request bodies, it necessitated changing request types pretty much everywhere else in the proxy codebase in order to fix the resulting type errors, which is why the diff for this PR is so large.
Closes#570
Fixes#600
The proxy metrics endpoint has a bug where metrics recorded in the outbound direction can contain two commas in a row when no outbound label is present. This occurs because the code for formatting the outbound direction label mistakenly assumed that there would always be a destination pod owner label as well, but the proxy isn't currently aware of the destination's pod owner (waiting for #429).
I've fixed this issue by moving the place where the comma is output from the `fmt::Display` impl for `RequestLabels` to the `fmt::Display` impl for `OutboudnLabels`. This way, the comma between the `direction` and `dst_*` labels is only output when the `dst_*` label is present.
This bug made it to master since all of the proxy end-to-end tests for metrics only test the inbound router. I've rectified this issue by adding tests on the outbound router as well (which would fail against the current master due to the double comma bug). I've also added a test that asserts there are no double commas in exported metrics, to protect against regressions to this bug.
This PR adds an endpoint to the proxy that serves metrics in Prometheus' text exposition format. The endpoint currently serves the `request_total`, `response_total`, `response_latency_ms`, and `response_duration_ms metrics`, as described in #536. The endpoint's port and address are configurable with the `CONDUIT_PROXY_METRICS_LISTENER` environment variable.
Tests have been added in t`ests/telemetry.rs`
When the proxy is run in a Docker container, it runs as PID 1, with
no default signal handlers setup. In order to react to signals from
Kubernetes about shutting down, we need to set up explicit handlers.
This adds handlers for SIGTERM and SIGINT.
Closes#549
In order to ensure we catch discovery and routing issues arising from different logic for HTTP/1 and HTTP/2 requests, I've modified tests/discovery.rs to run all applicable tests with both HTTP/1 and HTTP/2 requests. The tests themselves are largely unchanged, but now there are separate modules containing HTTP/1 and HTTP/2 versions of a majority of the tests.
Commit 569d6939a799bb0df6bd4053de7d7e8ac6b49ab6 introduced a regression that caused the proxy to stop using the Destination service for outbound HTTP/1 requests with no authority in the request URI but a valid authority in the `Host:` header.
The bug is due to some code in `Outbound::recognize` which assumed that a request had already been passed through `normalize_our_view_of_uri`. This was valid at one point while I was writing #492, as URIs were normalized prior to `recognize` and a request `Extension` was used to mark that they had been rewritten, and the host header and request URI could be assumed to be in agreement, but after merging #514 into the dev branch for #492, this behaviour changed and I forgot to update the logic in `recognize`.
I've fixed the issue by adding the logic for routing on `Host:` headers back into `Outbound::recognize`.
@seanmonstar added a test in `discovery.rs`, `outbound_http1_asks_controller_about_host`, which should exercise this case. I've added a couple more unit tests in that file to try and ensure we cover more of the different cases that can occur here.
Fixes#552
In some cases, we would adjust an existing Host header, or add one. And in all cases when an HTTP/1 request was received with an absolute-form target, it was not passed on.
Now, the Host header is never changed. And if the Uri was in absolute-form, it is sent in the same format.
Closes#518
An infinite loop exists in the TCP proxy, which could be triggered by any raw TCP connection (including HTTPS requests). The connection will be proxied successfully, but instead of closing, it will remain open, and the proxy's CPU usage will remain extremely high indefinitely.
Since `Duplex::poll` will call `half_in.copy_into()`/`half_out.copy_into()` repeatedly, even after they return `Async::Ready`, when one half has shut down and returned ready, it may still be polled again, as `Duplex::poll` waits until _both_ halves have returned `Ready`. Because of the guard that `!dst.is_shutdown`, intended to prevent the destination from shutting down twice, the function will not return if it is polled again after returning `Async::Ready` once.
I've fixed this by moving the guard against double shutdowns out of the loop, so that the function will return `Async::Ready` again if it is polled after shutting down the destination.
I've also included a unit test against regressions to this bug. The unit test fails against master.
Fixes#519
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
Co-Authored-By: Andrew Seigner <andrew@sig.gy>
* Proxy: Don't resolve absolute names outside zone using Destinations service
Many absolute names were being resolved using the Destinations service due to logic error
in the proxy's matching of the zone to the default zone.
Fix that bug.
Signed-off-by: Brian Smith <brian@briansmith.org>
Oliver Gould
Sean McArthur
Eliza Weisman
Brian Smith
Carl Lerche
Phil Calçado
Andrew Seigner