* Allow custom cluster domain in destination watcher
The change relaxes the constrains of an authority requiring a
`svc.cluster.local` suffix to only require `svc` as third part.
A unit test could be added though the destination/server and endpoint
watcher already test this behaviour.
* Update proto to allow setting custom cluster domain
Update golden templates
* Allow setting custom domain in grpc, web server
* Remove cluster domain flags from web srv and public api
* Set defaultClusterDomain in validateAndBuild if none is set
Signed-off-by: Armin Buerkle <armin.buerkle@alfatraining.de>
When waiting for controller pods to be created or become ready, `linkerd check` doesn't offer any hints as to whether there has been an error (such as an ImagePullBackoff).
We add pod status to the output to make this more immediately obvious.
Fixes#2877
Signed-off-by: Alex Leong <alex@buoyant.io>
This PR improves the CLI output for `linkerd edges` to reflect the latest API
changes.
Source and destination namespaces for each edge are now shown by default. The
`MSG` column has been replaced with `Secured` and contains a green checkmark or
the reason for no identity. A new `-o wide` flag shows the identity of client
and server if known.
During operations with `linkerd stat` sometimes it's not clear the actual
pod status.
This commit introduces a method, to the `k8s`package, getting the pod status,
based on [`kubectl` logic](33a3e325f7/pkg/printers/internalversion/printers.go (L558-L640))
to expose the `STATUS` column for pods . Also, it changes the stat command
on the` cli` package adding a column when the resource type is a Pod.
Fixes#1967
Signed-off-by: Jonathan Juares Beber <jonathanbeber@gmail.com>
When getting pods for specific kubernetes resources, the usage of just
labels, as a selector, generates wrong outputs. Once, two resources can use
the same label selector and manage distinct pods, a new mechanism to check
pods for a given resource it's needed. More details on #2932.
This commit introduces a verification through the pod owner references
`UID`s, comparing with the given resource's. Additional logic is needed
when handling `Deployments` since it creates a `ReplicaSet` and this last
one is the actual pod's owner. No verification is done in case of
`Services`.
Signed-off-by: Jonathan Juares Beber <jonathanbeber@gmail.com>
To give better visibility into the inner workings of the kubernetes watchers in the destination service, we add some prometheus metrics.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Have `linkerd endpoints` use `Destination.Get`
Fixes#2885
We're refactoring `linkerd endpoints` so it hits
directly the `Destination.Get` endpoint, instead of relying on the
Discovery service.
For that, I've created a new `client.go` for Destination and added it to
the `APIClient` interface.
I've also added a `destinationClient` struct that mimics `tapClient`,
and whose common logic has been moved into `stream_client.go`.
Analogously, I added a `destinationServer` struct that mimics
`tapServer`.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
This PR fixes a bug in the edges command where if src_resources from two
different namespaces sent requests to the same dst_resource, the original
src_identity was overwritten.
This change implements the DstOverrides feature of the destination profile API (aka traffic splitting).
We add a TrafficSplitWatcher to the destination service which watches for TrafficSplit resources and notifies subscribers about TrafficSplits for services that they are subscribed to. A new TrafficSplitAdaptor then merges the TrafficSplit logic into the DstOverrides field of the destination profile.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Simplify port-forwarding code
Simplifies the establishment of a port-forwarding by moving the common
logic into `PortForward.Init()`
Stemmed from this
[comment](https://github.com/linkerd/linkerd2/pull/2937#discussion_r295078800)
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Have `GetOwnerKindAndName` be able to skip the cache
Refactored `GetOwnerKindAndName` so it can optionally skip the
shared informer cache and instead hit the k8s API directly.
Useful for the proxy injector, when the pod's replicaset got just
created and might not be in ready in the cache yet.
Fixes#2738
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
This is a major refactor of the destination service. The goals of this refactor are to simplify the code for improved maintainability. In particular:
* Remove the "resolver" interfaces. These were a holdover from when our decision tree was more complex about how to handle different kinds of authorities. The current implementation only accepts fully qualified kubernetes service names and thus this was an unnecessary level of indirection.
* Moved the endpoints and profile watchers into their own package for a more clear separation of concerns. These watchers deal only in Kubernetes primitives and are agnostic to how they are used. This allows a cleaner layering when we use them from our gRPC service.
* Renamed the "listener" types to "translator" to make it more clear that the function of these structs is to translate kubernetes updates from the watcher to gRPC messages.
Signed-off-by: Alex Leong <alex@buoyant.io>
Adds a check to Prometheus `edges` queries to verify that data for the requested
resource type exists. Previously, if Prometheus could not find request data for the
requested resource type, it would skip that label and still return data for
other labels in the `by` clause, leading to an incorrect response.
Adds an edges command to the CLI. `linkerd edges` displays connections between resources, and Linkerd proxy identities. Currently this feature will only display edges where both the client identity and server identity are known. The next step will be to display edges for which identity is not known and/or one-sided traffic such as Prometheus and tap requests.
This change adds an endpoint to the public API to allow us to query Prometheus for edge data, in order to display identity information for connections between Linkerd proxies. This PR only includes changes to the controller and protobuf.
Private k8s clusters, such as the private GKE clusters offered by Google
Cloud, cannot be reached through the current API proxy method.
This commit uses the port forwarding feature already developed.
Also modify dashboard command to not fall back to ephemeral port.
Signed-off-by: Jack Price <jackprice@outlook.com>
This change reintroduces identity hinting to the destination service.
The Get endpoint includes identities for pods that are injected with an
identity-mode of "default" and have the same linkerd control plane.
A `serviceaccount` label is now also added to destination response
metadata so that it's accessible in prometheus and tap.
The new proxy has changed its configuration as follows:
- `LISTENER` urls are now `LISTEN_ADDR` addresses;
- `CONTROL_URL` is now `DESTINATION_SVC_ADDR`;
- `*_NAMESPACE` vars are no longer needed;
- The `PROXY_ID` is now the `DESTINATION_CONTEXT`;
- The "metrics" port is now the "admin" port, since it serves more than
just metrics;
- A readiness probe now checks a dedicated /ready endpoint eagerly.
Identity injection is **NOT** configured by this branch.
This change introduces a new Identity service implementation for the
`io.linkerd.proxy.identity.Identity` gRPC service.
The `pkg/identity` contains a core, abstract implementation of the service
(generic over both the CA and (Kubernetes) Validator interfaces).
`controller/identity` includes a concrete implementation that uses the
Kubernetes TokenReview API to validate serviceaccount tokens when
issuing certificates.
This change does **NOT** alter installation or runtime to include the
identity service. This will be included in a follow-up.
The proxy's TLS implementation has changed to use a new _Identity_ controller.
In preparation for this, the `--tls=optional` CLI flag has been removed
from install and inject; and the `ca` controller has been deleted. Metrics
and UI treatments for TLS have **not** been removed, as they will continue to
be valuable for the new Identity system.
With the removal of the old identity scheme, the Destination service's proxy
ID field is now set with an opaque string (e.g. `ns:emojivoto`) to enable
locality awareness.
linkerd/linkerd2#1721 introduced a `--single-namespace` install flag,
enabling the control-plane to function within a single namespace. With
the introduction of ServiceProfiles, and upcoming identity changes, this
single namespace mode of operation is becoming less viable.
This change removes the `--single-namespace` install flag, and all
underlying support. The control-plane must have cluster-wide access to
operate.
A few related changes:
- Remove `--single-namespace` from `linkerd check`, this motivates
combining some check categories, as we can always assume cluster-wide
requirements.
- Simplify the `k8s.ResourceAuthz` API, as callers no longer need to
make a decision based on cluster-wide vs. namespace-wide access.
Components either have access, or they error out.
- Modify the web dashboard to always assume ServiceProfiles are enabled.
Reverts #1721
Part of #2337
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
## Problem
When an object has no previous route metrics, we do not generate a table for
that object.
The reasoning behind this was for reducing output of the following command:
```
$ linkerd routes deploy --to deploy/foo
```
For each deployment object, if it has no previous traffic to `deploy/foo`, then
a table would not be generated for it.
However, the behavior we see with that indicates there is an error even when a
Service Profile is installed:
```
$ linkerd routes deploy deploy/foo
Error: No Service Profiles found for selected resources
```
## Solution
Always generate a stat table for the queried resource object.
## Validation
I deployed [booksapp](https://github.com/buoyantIO/booksapp) with the `traffic`
deployment removed and Service Profiles installed.
Without the fix, `linkerd routes deploy/webapp` displays an error because there
has been no traffic to `deploy/webapp` without the `traffic` deployment.
With the fix, the following output is generated:
```
ROUTE SERVICE SUCCESS RPS LATENCY_P50 LATENCY_P95 LATENCY_P99
GET / webapp 0.00% 0.0rps 0ms 0ms 0ms
GET /authors/{id} webapp 0.00% 0.0rps 0ms 0ms 0ms
GET /books/{id} webapp 0.00% 0.0rps 0ms 0ms 0ms
POST /authors webapp 0.00% 0.0rps 0ms 0ms 0ms
POST /authors/{id}/delete webapp 0.00% 0.0rps 0ms 0ms 0ms
POST /authors/{id}/edit webapp 0.00% 0.0rps 0ms 0ms 0ms
POST /books webapp 0.00% 0.0rps 0ms 0ms 0ms
POST /books/{id}/delete webapp 0.00% 0.0rps 0ms 0ms 0ms
POST /books/{id}/edit webapp 0.00% 0.0rps 0ms 0ms 0ms
[DEFAULT] webapp 0.00% 0.0rps 0ms 0ms 0ms
```
Closes#2328
Signed-off-by: Kevin Leimkuhler <kevinl@buoyant.io>
linkerd/linkerd2#2428 modified SelfSubjectAccessReview behavior to no
longer paper-over failed ServiceProfile checks, assuming that
ServiceProfiles will be required going forward. There was a lingering
ServiceProfile check in the web's startup that started failing due to
this change, as the web component does not have (and should not need)
ServiceProfile access. The check was originally implemented to inform
the web component whether to expect "single namespace" mode or
ServiceProfile support.
Modify the web's initialization to always expect ServiceProfile support.
Also remove single namespace integration test
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
linkerd/linkerd2#2349 removed the `--single-namespace` flag, in favor of
runtime detection of cluster vs. namespace access, and also
ServiceProfile availability. This maintained control-plane support for
running in these two states.
This change requires control-plane components have cluster-wide
Kubernetes API access and ServiceProfile availability, and will error
out if not. Once #2349 merges, stage 1 install will be a requirement for
a successful stage 2 install.
Part of #2337
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
We were depending on an untagged version of prometheus/client_golang
from Feb 2018.
This bumps our dependency to v0.9.2, from Dec 2018.
Also, this is a prerequisite to #1488.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
As described in #2217, the controller returns TLS identities for results even
when the destination pod may not be able to participate in identity
requester: specifically, the other pod may not have the same controller
namespace or it may not be injected with identity.
This change introduces a new annotation, linkerd.io/identity-mode that is set
when injecting pods (via both CLI and webhook). This annotation is always
added.
The destination service now only returns TLS identities when this annotation
is set to optional on a pod and the destination pod uses the same controller.
These semantics are expected to change before the 2.3 release.
Fixes#2217
Previously, the update-handling logic was spread across several very
small functions that were only called within this file. I've
consolidated this logic into endpointListener.Update so that all of the
debug logging can be instrumented in one place without having to iterate
over lists multiple times.
Also, I've fixed the formatting of IP addresses in some places.
Logs now look as follows:
msg="Establishing watch on endpoint linkerd-prometheus.linkerd:9090" component=endpoints-watcher
msg="Subscribing linkerd-prometheus.linkerd:9090 exists=true" component=service-port id=linkerd-prometheus.linkerd target-port=admin-http
msg="Update: add=1; remove=0" component=endpoint-listener namespace=linkerd service=linkerd-prometheus
msg="Update: add: addr=10.1.1.160; pod=linkerd-prometheus-7bbc899687-nd9zt; addr:<ip:<ipv4:167838112 > port:9090 > weight:1 metric_labels:<key:\"control_plane_ns\" value:\"linkerd\" > metric_labels:<key:\"deployment\" value:\"linkerd-prometheus\" > metric_labels:<key:\"pod\" value:\"linkerd-prometheus-7bbc899687-nd9zt\" > metric_labels:<key:\"pod_template_hash\" value:\"7bbc899687\" > protocol_hint:<h2:<> > " component=endpoint-listener namespace=linkerd service=linkerd-prometheus
The control-plane components relied on a `--single-namespace` param,
passed from `linkerd install` into each individual component, to
determine which namespaces they were authorized to access, and whether
to support ServiceProfiles. This command-line flag was redundant given
the authorization rules encoded in the parent `linkerd install` output,
via [Cluster]Role[Binding]s.
Modify the control-plane components to query Kubernetes at startup to
determine which namespaces they are authorized to access, and whether
ServiceProfile support is available. This allows removal of the
`--single-namespace` flag on the components.
Also update `bin/test-cleanup` to cleanup the ServiceProfile CRD.
TODO:
- Remove `--single-namespace` flag on `linkerd install`, part of #2164
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
goconst finds repeated strings that could be replaced by a constant:
https://github.com/jgautheron/goconst
Part of #217
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Adds a flag, tcp_stats to the StatSummary request, which queries prometheus for TCP stats.
This branch returns TCP stats at /api/tps-reports when this flag is true.
TCP stats are now displayed on the Resource Detail pages.
The current queried TCP stats are:
tcp_open_connections
tcp_read_bytes_total
tcp_write_bytes_total
Up until now, the proxy-api controller service has been the sole service
that the proxy communicates with, implementing the majoriry of the API
defined in the `linkerd2-proxy-api` repo. But this is about to change:
linkerd/linkerd2-proxy-api#25 introduces a new Identity service; and
this service must be served outside of the existing proxy-api service
in the linkerd-controller deployment (so that it may run under a
distinct service account).
With this change, the "proxy-api" name becomes less descriptive. It's no
longer "the service that serves the API for the proxy," it's "the
service that serves the Destination API to the proxy." Therefore, it
seems best to bite the bullet and rename this to be the "destination"
service (i.e. because it only serves the
`io.linkerd.proxy.destination.Destination` service).
Co-authored-by: Kevin Lingerfelt <kl@buoyant.io>
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
# Problem
When a route does not specify a timeout, the proxy-api defaults to the default
timeout and logs an error:
```
time="2019-02-13T16:29:12Z" level=error msg="failed to parse duration for route POST /io.linkerd.proxy.destination.Destination/GetProfile: time: invalid duration"
```
# Solution
We now check if a route timeout is blank. If it is not set, it is set to
`DefaultRouteTimeout`. If it is set, we try to parse it into a `Duration`.
A request was made to improve logging to include the service profile and
namespace as well.
# Validation
With valid service profiles installed, edit the `.yaml` to include an invalid
`timeout`:
```
...
name: GET /
timeout: foo
```
We should now see the following errors:
```
proxy-api time="2019-02-13T22:27:32Z" level=error msg="failed to parse duration for route 'GET /' in service profile 'webapp.default.svc.cluster.local' in namespace 'default': time: invalid duration foo"
```
This error does not show up when `timeout` is blank.
Fixes#2276
Signed-off-by: Kevin Leimkuhler <kevinl@buoyant.io>
`golangci-lint` performs numerous checks on Go code, including golint,
ineffassign, govet, and gofmt.
This change modifies `bin/lint` to use `golangci-lint`, and replaces
usage of golint and govet.
Also perform a one-time gofmt cleanup:
- `gofmt -s -w controller/`
- `gofmt -s -w pkg/`
Part of #217
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Fixes#2077
When looking up service profiles, Linkerd always looks for the service profile objects in the Linkerd control namespace. This is limiting because service owners who wish to create service profiles may not have write access to the Linkerd control namespace.
Instead, we have the control plane look for the service profile in both the client namespace (as read from the proxy's `proxy_id` field from the GetProfiles request and from the service's namespace. If a service profile exists in both namespaces, the client namespace takes priority. In this way, clients may override the behavior dictated by the service.
Signed-off-by: Alex Leong <alex@buoyant.io>
The Proxy API service lacked introspection of its internal state.
Introduce a new gRPC Discovery API, implemented by two servers:
1) Proxy API Server: returns a snapshot of discovery state
2) Public API Server: pass-through to the Proxy API Server
Also wire up a new `linkerd endpoints` command.
Fixes#2165
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Adds the ability to generate a service profile by running a tap for a configurable
amount of time, and using the route results from the routes seen during the tap.
e.g. `linkerd profile web --tap deploy/web -n emojivoto --tap-duration 2s`
Fixes#2042
Adds a new field to service profile routes called `timeout`. Any requests to that route which take longer than the given timeout will be aborted and a 504 response will be returned instead. If the timeout field is not specified, a default timeout of 10 seconds is used.
Signed-off-by: Alex Leong <alex@buoyant.io>
arminbuerkle
Alex Leong
Carol A. Scott
Jonathan Juares Beber
Alejandro Pedraza
Jack Price
harsh jain
Oliver Gould
Andrew Seigner
Kevin Leimkuhler
Alejandro Pedraza
Tarun Pothulapati
Risha Mars
Kevin Lingerfelt
Ivan Sim
Ye Ben