* Add TLS support to `conduit inject`.
Add the settings needed to enable TLs when `--tls=optional` is passed on the
commend line. Later the requirement to add `--tls` will be removed.
Signed-off-by: Brian Smith <brian@briansmith.org>
* Add CA certificate bundle distributor to conduit install
* Update ca-distributor to use shared informers
* Only install CA distributor when --enable-tls flag is set
* Only copy CA bundle into namespaces where inject pods have the same controller
* Update API config to only watch pods and configmaps
* Address review feedback
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Add controller admin servers and readiness probes
* Tweak readiness probes to be more sane
* Refactor based on review feedback
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
The `kubernetes-nodes-cadvisor` Prometheus queries node-level data via
the Kubernetes API server. In some configurations of Kubernetes, namely
minikube and at least one baremetal kubespray cluster, this API call
requires the `get` verb on the `nodes/proxy` resource.
Enable `get` for `nodes/proxy` for the `conduit-prometheus` service
account.
Fixes#912
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
- It would be nice to display container errors in the UI. This PR gets the pod's container
statuses and returns them in the public api
- Also add a terminationMessagePolicy to conduit's inject so that we can capture the
proxy's error messages if it terminates
* Add readiness/liveness checks for third party components
Any possible issues with the third party control plane components can wedge the services.
Take the best practices for prometheus/grafana and add them to our template. See #1116
* Update test fixtures for new output
* conduit inject: Add flag to set proxy bind timeout (#863)
* fix test
* fix flag to get it working with #909
* Add time parsing
* Use the variable to set the default value
Signed-off-by: Sacha Froment <sfroment42@gmail.com>
Running `conduit install --api-port xxx` where xxx != 8086 would yield a
broken install.
Fix the install command to correctly propagate the `api-port` flag,
setting it as the serve address in the proxy-api container.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Grafana provides default dashboards for Prometheus and Grafana health.
The community also provides Kubernetes-specific dashboards. Conduit was
not taking advantage of these.
Introduce new Grafana dashboards focused on Grafana, Kubernetes, and
Prometheus health. Tag all Conduit dashboards for easier UI navigation.
Also fix layout in Conduit Health dashboard.
Part of #420
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
When prometheus queries the proxy for data, these requests are reported
as inbound traffic to the pod. This leads to misleading stats when a pod
otherwise receives little/no traffic.
In order to prevent these requests being proxied, the metrics port is
now added to the default inbound skip-ports list (as is already case for
the tap server).
Fixes#769
* Add namespace as a resource type in public-api
The cli and public-api only supported deployments as a resource type.
This change adds support for namespace as a resource type in the cli and
public-api. This also change includes:
- cli statsummary now prints `-`'s when objects are not in the mesh
- cli statsummary prints `No resources found.` when applicable
- removed `out-` from cli statsummary flags, and analagous proto changes
- switched public-api to use native prometheus label types
- misc error handling and logging fixes
Part of #627
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Refactor filter and groupby label formulation
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Rename stat_summary.go to stat.go in cli
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Update rbac privileges for namespace stats
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Remove the telemetry service
The telemetry service is no longer needed, now that prometheus scrapes
metrics directly from proxies, and the public-api talks directly to
prometheus. In this branch I'm removing the service itself as well as
all of the telemetry protobuf, and updating the conduit install command
to no longer install the service. I'm also removing the old version of
the stat command, which required the telemetry service, and renaming the
statsummary command to stat.
* Fix time window tests
* Remove deprecated controller scrape config
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Start implementing new conduit stat summary endpoint.
Changes the public-api to call prometheus directly instead of the
telemetry service. Wired through to `api/stat` on the web server,
as well as `conduit statsummary` on the CLI. Works for deployments only.
Current implementation just retrieves requests and mesh/total pod count
(so latency stats are always 0).
Uses API defined in #663
Example queries the stat endpoint will eventually satisfy in #627
This branch includes commits from @klingerf
* run ./bin/dep ensure
* run ./bin/update-go-deps-shas
The Destination service used slightly different labels than the
telemetry pipeline expected, specifically, prefixed with `k8s_*`.
Make all Prometheus labels consistent by dropping `k8s_*`. Also rename
`pod_name` to `pod` for consistency with `deployement`, etc. Also update
and reorganize `proxy-metrics.md` to reflect new labelling.
Fixes#655
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Using a vanilla Grafana Docker image as part of `conduit install`
avoided maintaining a conduit-specific Grafana Docker image, but made
packaging dashboard json files cumbersome.
Roll our own Grafana Docker image, that includes conduit-specific
dashboard json files. This significantly decreases the `conduit install`
output size, and enables dashboard integration in the docker-compose
environment.
Fixes#567
Part of #420
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Previously we were using the instance label to uniquely identify a pod.
This meant that getting stats by pod name would require extra queries to
Kubernetes to map pod name to instance.
This change adds a pod_name label to metrics at collection time. This
should not affect cardinality as pod_name is invariant with respect to
instance.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The Prometheus scrape config collects from Conduit proxies, and maps
Kubernetes labels to Prometheus labels, appending "k8s_".
This change keeps the resultant Prometheus labels consistent with their
source Kubernetes labels. For example: "deployment" and
"pod_template_hash".
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The inject code detects the object it is being injected into, and writes
self-identifying information into the CONDUIT_PROMETHEUS_LABELS
environment variable, so that conduit-proxy may read this information
and report it to Prometheus at collection time.
This change puts the self-identifying information directly into
Kubernetes labels, which Prometheus already collects, removing the need
for conduit-proxy to be aware of this information. The resulting label
in Prometheus is recorded in the form `k8s_deployment`.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
In addition to dashboards display service health, we need a dashboard to
display health of the Conduit service mesh itself.
This change introduces a conduit-health dashboard. It currently only
displays health metrics for the control plane components. Proxy health
will come later.
Fixes#502
Part of #420
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Update the inject command to set a CONDUIT_PROMETHEUS_LABELS proxy environment variable with the name of the pod spec that the proxy is injected into. This will later be used as a label value when the proxy is exposing metrics.
Fixes: #426
Signed-off-by: Alex Leong <alex@buoyant.io>
The existing telemetry pipeline relies on Prometheus scraping the
Telemetry service, which will soon be removed.
This change configures Prometheus to scrape the conduit proxies directly
for telemetry data, and the control plane components for control-plane
health information. This affects the output of both conduit install
and conduit inject.
Fixes#428, #501
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The existing `conduit dashboard` command supported opening the conduit
dashboard, or displaying the conduit dashboard URL, via a `url` boolean
flag.
Replace the `url` boolean flag with a `show` string flag, with three
modes:
`conduit dashboard --show conduit`: default, open conduit dashboard
`conduit dashboard --show grafana`: open grafana dashboard
`conduit dashboard --show url`: display dashboard URLs
Part of #420
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Existing Grafana configuration contained no dashboards, just a skeleton
for testing.
Introduce two Grafana dashboards:
1) Top Line: Overall health of all Conduit-enabled services
2) Deployment: Health of a specific conduit-enabled deployment
Fixes#500
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Most controller listeners should only bind on localhost
* Use default listening addresses in controller components
* Review feedback
* Revert test_helper change
* Revert use of absolute domains
Signed-off-by: Alex Leong <alex@buoyant.io>
* Temporarily stop trying to support configurable zones in the proxy.
None of the zone configuration is tested and lots of things assume the cluster
zone is `cluster.local`. Further, how exactly the proxy will actually learn the
cluster zone hasn't been decided yet.
Just hard-code the zone as "cluster.local" in the proxy until configurable zones
are fully implemented and tested to be working correctly.
Signed-off-by: Brian Smith <brian@briansmith.org>
* Remove the CONDUIT_PROXY_DESTINATIONS_AUTOCOMPLETE_FQDN setting
The way that Kubernetes configures DNS search suffixes has some negative
consequences as some names like "example.com" are ambiguous: depending on
whether there is a service "example" in the "com" namespace, "example.com"
may refer to an external service or an internal service, and this can
fluctuate over time. In recognition of that we added the
CONDUIT_PROXY_DESTINATIONS_AUTOCOMPLETE_FQDN setting, thinking this would
be part of a solution for users to opt out of the unfortunate behavior
if their applications didn't depend on the DNS search suffix feature.
It turns out similar effects can be acheived using a custom dnsConfig,
starting in Kubernetes 1.10 when dnsConfig reaches the beta stability level.
Now any CONDUIT_PROXY_DESTINATIONS_AUTOCOMPLETE_FQDN-based seems duplicative.
Further, attempting to support it optionally made the code complex and hard
to read.
Therefore, let's just remove it. If/when somebody actually requests this
functionality then we can add it back, if dnsConfig isn't a valid alternative
for them.
Signed-off-by: Brian Smith <brian@briansmith.org>
* Further hard-code "cluster.local" as the zone, temporarily.
Addresses review feedback.
Signed-off-by: Brian Smith <brian@briansmith.org>
Kubernetes will do multiple DNS lookups for a name like
`proxy-api.conduit.svc.cluster.local` based on the default search settings
in /etc/resolv.conf for each container:
1. proxy-api.conduit.svc.cluster.local.conduit.svc.cluster.local. IN A
2. proxy-api.conduit.svc.cluster.local.svc.cluster.local. IN A
3. proxy-api.conduit.svc.cluster.local.cluster.local. IN A
4. proxy-api.conduit.svc.cluster.local. IN A
We do not need or want this search to be done, so avoid it by making each
name absolute by appending a period so that the first three DNS queries
are skipped for each name.
The case for `localhost` is even worse because we expect that `localhost` will
always resolve to 127.0.0.1 and/or ::1, but this is not guaranteed if the default
search is done:
1. localhost.conduit.svc.cluster.local. IN A
2. localhost.svc.cluster.local. IN A
3. localhost.cluster.local. IN A
4. localhost. IN A
Avoid these unnecessary DNS queries by making each name absolute, so that the
first three DNS queries are skipped for each name.
Signed-off-by: Brian Smith <brian@briansmith.org>
Grafana by default calls out to grafana.com to check for updates. As
user's of Conduit do not have direct control over updating Grafana
directly, this update check is not needed.
Disable Grafana's update check via grafana.ini.
This is also a workaround for #155, root cause of #519.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
When the conduit proxy is injected into the controller pod, we observe controller pod proxy stats show up as an "outbound" deployment for an unrelated upstream deployment. This may cause confusion when monitoring deployments in the service mesh.
This PR filters out this "misleading" stat in the public api whenever the dashboard requests metric information for a specific deployment.
* exclude telemetry generated by the control plane when requesting deployment metrics
fixes#370
Signed-off-by: Dennis Adjei-Baah <dennis@buoyant.io>
In the initial review for this code (preceding the creation of the
runconduit/conduit repository), it was noted that this container is not
actually used, so this is actually dead code.
Further, this container actualy causes a minor problem, as it doesn't
implement any retry logic, thus it will sometimes often cause errors to
be logged. See
https://github.com/runconduit/conduit/issues/496#issuecomment-370105328.
Further, this is a "buoyantio/" branded container. IF we actually need
such a container then it should be a Conduit-branded container.
See https://github.com/runconduit/conduit/issues/478 for additional
context.
Signed-off-by: Brian Smith <brian@briansmith.org>
`conduit install` deploys prometheus, but lacks a general-purpose way to
visualize that data.
This change adds a Grafana container to the `conduit install` command. It
includes two sample dashboards, viz and health, in their own respective
source files.
Part of #420
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The telemetry service in the controller pod uses a non-fully qualified URL to connect to the prometheus pod in the control plane. This PR changes the URL the telemetry's prometheus URL to be fully qualified to be consistent with other URLs in the control plane. This change was tested in minikube. The logs report no errors and looking at the prometheus dashboard shows that stats are being recorded from all conduit proxies.
fixes#414
Signed-off-by: Dennis Adjei-Baah dennis@buoyant.io
The `app` label should be reserved for end-user applications and we
shouldn't use it ourselves. We already have a Conduit-specific label
that is is prefixed with the `conduit.io/` prefix to avoid naming
collisions with users' labels, so just use that one instead.
Signed-off-by: Brian Smith <brian@briansmith.org>
In order to take advantage of the benefits the conduit proxy gives to deployments, this PR injects the conduit proxy into the control plane pod. This helps us lay the groundwork for future work such as TLS, control plane observability etc.
Fixes#311
Signed-off-by: Dennis Adjei-Baah <dennis@buoyant.io>
- reduce row spacing on tables to make them more compact
- Rename TabbedMetricsTable to MetricsTable since it's not tabbed any more
- Format latencies greater than 1000ms as seconds
- Make sidebar collapsible
- poll the /pods endpoint from the sidebar in order to refresh the list of deployments in the autocomplete
- display the conduit namespace in the service mesh details table
- Use floats rather than Col for more responsive layout (fixes#224)
Conduit has been on Prometheus 1.8.1. Prometheus 2.x promises better
performance.
Upgrade Conduit to Prometheus 2.1.0
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The conduit.io/* k8s labels and annotations we're redundant in some
cases, and not flexible enough in others.
This change modifies the labels in the following ways:
`conduit.io/plane: control` => `conduit.io/controller-component: web`
`conduit.io/controller: conduit` => `conduit.io/controller-ns: conduit`
`conduit.io/plane: data` => (remove, redundant with `conduit.io/controller-ns`)
It also centralizes all k8s labels and annotations into
pkg/k8s/labels.go, and adds tests for the install command.
Part of #201
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Brian Smith
Kevin Lingerfelt
Andrew Seigner
Risha Mars
Thomas Rampelberg
Sacha Froment
Oliver Gould
Alex Leong
Dennis Adjei-Baah