This an initial implementation of the `linkerd top` command. This command launches an ncurses style tabular view of current requests (using data from tap). Most of the command line arguments are the same as tap and allow selecting the resource to inspect and filtering which requests to view.
Fixes#1283
Signed-off-by: Alex Leong <alex@buoyant.io>
Based on @adleong's suggestion in
https://github.com/linkerd/linkerd2/pull/1434#pullrequestreview-145428857,
this branch adds label hydration from destination IPs to the Tap server.
This works the same as the label hydration for destination IPs added in
#1434. However, it is only applied to the destination fields of events
recorded by proxies in the inbound direction, since outbound
destinations are already labeled with metadata provided by the
Destination service.
This means that when a user taps inbound traffic, the CLI will show k8s
metadata labels for the destination peer (if it's available). This can
be useful especially when tapping several pods at once, as it makes it
easier to distinguish what pod received a request.
This branch also refactors how the label hydration is performed,
primarily to make adding it to the destination field less repetitive.
Also, the `hydrateIPLabels` function now mutates the label map in the
`TapEvent`, rather than returning a new map of labels, so that the case
where no pod was found doesn't require an additional allocation of an
empty map.
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
The `TapEvent` protobuf contains two maps, `DestinationMeta` and
`SourceMeta`. The `DestinationMeta` contains all the metadata provided
by the proxy that originated the event (ultimately originating from the
Destination service), while the `SourceMeta` currently only contains the
source connection's TLS status.
This branch modifies the Tap server to hydrate the same set of metadata
from the source IP address, when the source was within the cluster. It
does this by adding an indexer of pod IPs to pods to its k8s API client,
and looking up IPs against this index. If a pod was found, the extra
metadata is added to the tap event sent to the client.
This branch also changes the client so that if a source pod name was
provided in the metadata, it prints the pod name rather than the IP
address for the `src` field in its output. This mimics what is currently
done for the `dst` field in tap output. Furthermore, the added source
metadata will be necessary for adding src resource types to tap output
(see issue #1170).
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
Fixes#1405.
According to the Kubernetes Endpoints API documentation, the `name`
field in the `EndpointPort` response object is "Optional if only one
port is defined". (see
https://v1-9.docs.kubernetes.io/docs/reference/generated/kubernetes-api/v1.9/#endpointport-v1-core)
However, when the Destination service an endpoints response for a
service with a named target port, it expects the ports in the endpoints
response to have the same name as the target port in the service.
When a user creates a `NodePort` service with an unnamed port that
targets a named container port, this behaviour results in Linkerd
failing to route to that service by hostname. Without Linkerd injected,
the hostname is still reachable.
This branch fixes this issue by changing the `endpointsToAddresses`
function in `endpoints_watcher.go` to handle the case when an endpoints
response contains only a single unnamed port.
I've manually verified that this fixes the issue described in #1405.
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
The `reader.Read` method only reads as many bytes as are currently available from reader. When reading the 4 byte message length header, if not all 4 of those bytes are available, `Read` will only read the available bytes and return. This causes alignment issues when the message body is read and there are still unread header bytes in the reader. These bytes will appear at the beginning of the message body and cause a crash when the message is unmarshalled.
Use `io.ReadFull` to ensure that we read all 4 of the message length header bytes.
Fixes#1287
Signed-off-by: Alex Leong <alex@buoyant.io>
* Update ant to 3.7.2
* Add autocomplete of namespaces/resources to Tap in web ui
* Add form fields for authority/path/method/rps/scheme
* Add the ability to clear error messages to the error banner
* Add error listener to ws object
Speed up incremental rebuilds by avoiding relinking the controller
and/or web executables when changes are made to unrelated files.
Before this change, any time the git tag changed, the executables
would have to be rebuilt (relinked at least), even if no Go files
changed.
Validated by running the integration tests.
Signed-off-by: Brian Smith <brian@briansmith.org>
Adds a tap endpoint in the web api that communicates with the dashboard
via websockets.
I've moved a bunch of code from the cli tap.go into utils so that the code
can be shared between web and CLI. I think we should consider making the
display more suited to web, but in the short term, reusing the CLI's
rendering of tap events works.
Adds a Tap page in the Web UI that you can use to make tap requests.
The form currently only allows you to enter a resource and namespace,
other filters coming in a follow-up branch.
`ca-bundle-distributor` described the original role of the program but
`ca` ("Certificate Authority") better describes its current role.
Signed-off-by: Brian Smith <brian@briansmith.org>
* Stop using `installsuffix` when building Go code.
See https://plus.google.com/117192131596509381660/posts/eNnNePihYnK.
`-installsuffix cgo` isn't necessary as of Go 1.10 (where build caching
changed substantially) and it probably wasn't necessary earlier.
Signed-off-by: Brian Smith <brian@briansmith.org>
* Ensure destination service always sends pod metadata
* Fix test that relied on hash ordering
* Stop using protobuf structs as map keys, fix logging
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
This PR begins to migrate Conduit to Linkerd2:
* The proxy has been completely removed from this repo, and is now located at
github.com/linkerd/linkerd2-proxy.
* A `Dockerfile-proxy` has been added to fetch the most-recently published proxy
binary from build.l5d.io.
* Proxy-specific protobuf bindings have been moved to
github.com/linkerd/linkerd2-proxy-api.
* All docker images now use the gcr.io/linkerd-io registry.
* `inject` now uses `LINKERD2_PROXY_` environment variables
* Go paths have been updated to reflect the new (future) repo location.
* Fix bug where we were using dst_authorities as a group by instead of authorities
* Add test to make sure we don't dst_authorities
Previously, we were only checking to make sure we didn't add
dst_authorities in the query labels in promDstQueryLabels but we
weren't checking the groupBy labels in promDstGroupByLabelNames -
this caused us to try to query for dst_authorities when a --from
query was sent. There are no dst_authorities, so there would be no
named results.
- Add Reason to the error data passed from the api
- Rewrite error logic in the UI to try to make it clearer
- Show 0/0 pods meshed instead of 0/0 pods meshed (N/A) if 0 pods are meshed
Create a ephemeral, in-memory TLS certificate authority and integrate it into the certificate distributor.
Remove the re-creation of deleted ConfigMaps; this will be added back later in #1248.
Signed-off-by: Brian Smith brian@briansmith.org
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
The proxy's metrics are instrumented with a `tls` label that describes
the state of TLS for each connection and associated messges.
This same level of detail is useful to get in `tap` output as well.
This change updates Tap in the following ways:
* `TapEvent` protobuf updated:
* Added `source_meta` field including source labels
* `proxy_direction` enum indicates which proxy server was used.
* The proxy adds a `tls` label to both source and destination meta indicating the state of each peer's connection
* The CLI uses the `proxy_direction` field to determine which `tls` label should be rendered.
I realized that our stat summary expectation checker would only check the actual
proto responses against the expectations if the expectations were non-empty.
Problem
If we expected empty results and the api returned actual results, we never actually
check those results against the expectations.
The bug can be reproduced by replacing any nonzero metric we expect in
expectedResponse with expectedResponse: genEmptyResponse()
The tests on master will still pass.
Solution
Remove this line and ensure we get the expected number of stat tables.
- Return pod uptimes from the GetPods endpoint
- Adds filtering by namespace to api.GetPods
- Adds a --namespace filter to conduit get pods
- Adds pod uptimes to the controller component toolitps on the ServiceMesh page
- Moves the ServiceMesh page back to using /api/pods
Adds the ability to query by a new non-kubernetes resource type, "authorities",
in the StatSummary api.
This includes an extensive refactor of stat_summary.go to deal with non-kubernetes
resource types.
- Add documentation to Resource in the public api so we can use it for authority
- Handle non-k8s resource requests in the StatSummary endpoint
- Rewrite stat summary fetching and parsing to handle non-k8s resources
- keys stat summary metric handling by Resource instead of a generated string
- Adds authority to the CLI
- Adds /authorities to the Web UI
- Adds some more stat integration and unit tests
* Add TLS support to `conduit inject`.
Add the settings needed to enable TLs when `--tls=optional` is passed on the
commend line. Later the requirement to add `--tls` will be removed.
Signed-off-by: Brian Smith <brian@briansmith.org>
* Update dest service with a different tls identity strategy
* Send controller namespace as separate field
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Add CA certificate bundle distributor to conduit install
* Update ca-distributor to use shared informers
* Only install CA distributor when --enable-tls flag is set
* Only copy CA bundle into namespaces where inject pods have the same controller
* Update API config to only watch pods and configmaps
* Address review feedback
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Add controller admin servers and readiness probes
* Tweak readiness probes to be more sane
* Refactor based on review feedback
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Don't allow the CLI or Web UI to request named resources if --all-namespaces is used.
This follows kubectl, which also does not allow requesting named resources
over all namespaces.
This PR also updates the Web API's behaviour to be in line with the CLI's.
Both will now default to the default namespace if no namespace is specified.
Problem
`conduit stat` would cause a panic for any resource that wasn't in the list
of StatAllResourceTypes
This bug was introduced by https://github.com/runconduit/conduit/pull/1088/files
Solution
Fix writeStatsToBuffer to not depend on what resources are in StatAllResourceTypes
Also adds a unit test and integration test for `conduit stat ns`
* dest service: close open streams on shutdown
* Log instead of print in pkg packages
* Convert ServerClose to a receive-only channel
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
- It would be nice to display container errors in the UI. This PR gets the pod's container
statuses and returns them in the public api
- Also add a terminationMessagePolicy to conduit's inject so that we can capture the
proxy's error messages if it terminates
protobuf has a `go_package` option that can be used to explicitly name
Go packages such that they can be imported without additional rewrites.
This allows us to store proto files without additional, redundant
directories (which were used for packaging hints, previously).
This change adds an explicit `go_package` to all .proto files and
updates `bin/protoc-go.sh` to ensure these packages are output into
$GOPATH (so that the go_package can be absolute). This removes the need
to manually rewrite imports in bin/protoc-go.sh.
* Update destination service ot use shared informer instead of custom endpoints informer
* Add additional tests for dst svc endpoints watcher
* Remove service ports when all listeners unsubscribed
* Update go deps
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Update desintation service to use shared informer instead of pod watcher
* Add const for pod IP index name
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Previously, in conduit stat all we would just print the map of stat results, which
resulted in the order in which stats were displayed varying between prints.
Fix:
Define an array, k8s.StatAllResourceTypes and use the order in this array to print
the map; ensuring a consistent print order every time the command is run.
Alex Leong
Eliza Weisman
Kevin Lingerfelt
Sean McArthur
Risha Mars
Brian Smith
Oliver Gould