* extension: Add new jaeger binary
This branch adds a new jaeger binary project in the jaeger directory.
This follows the same logic as that of `linkerd install`. But as
`linkerd install` VFS logic expects charts to be present in `/charts`
directory, This command gets its own static pkg to generate its own
VFS for its chart.
This covers only the install part of the command
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
Fixes#5191
The logs command adds a external dependency that we forked to work but
does not fit within linkerd's core set of responsibilities. Hence, This
is being removed.
For capabilities like this, The Kubernetes plugin ecosystem has better
and well maintained tools that can be used.
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
Fixes#5190
`linkerd get` is not used currently and works only for pods. This can be
removed instead as per the issue. This branch removes the command and
also the associated unit and integration tests.
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
This is a major refactor of the install/upgrade code which removes the config protobuf and replaces it with a config overrides secret which stores overrides to the values struct. Further background on this change can be found here: https://github.com/linkerd/linkerd2/discussions/4966
Note: as-is this PR breaks injection. There is work to move injection onto a Values-based config which must land before this can be merged.
A summary of the high level changes:
* the install, global, and proxy fields of linkerd-config ConfigMap are no longer populated
* the CLI install flow now follows these simple steps:
* load default Values from the chart
* update the Values based on the provided CLI flags
* render the chart with these values
* also render a Secret/linkerd-config-overrides which describes the values which have been changed from their defaults
* the CLI upgrade flow now follows these simple stesp:
* load the default Values from the chart
* if Secret/linkerd-config-overrides exists, apply the overrides onto the values
* otherwise load the legacy ConfigMap/linkerd-config and use it to updates the values
* further update the values based on the provided CLI flags
* render the chart and the Secret/linkerd-config-overrides as above
* Helm install and upgrade is unchanged
Signed-off-by: Alex Leong <alex@buoyant.io>
* Push docker images to ghcr.io instead of gcr.io
The `cloud_integration.yml` and `release.yml` workflows were modified to
log into ghcr.io, and remove the `Configure gcloud` step which is no
longer necessary.
Note that besides the changes to cloud_integration.yml and release.yml, there was a change to the upgrade-stable integration test so that we do linkerd upgrade --addon-overwrite to reset the addons settings because in stable-2.8.1 the Grafana image was pegged to gcr.io/linkerd-io/grafana in linkerd-config-addons. This will need to be mentioned in the 2.9 upgrade notes.
Also the egress integration test has a debug container that now is pegged to the edge-20.9.2 tag.
Besides that, the other changes are just a global search and replace (s/gcr.io\/linkerd-io/ghcr.io\/linkerd/).
* support overriding inbound and outbound connect timeouts.
* add validation on user provided TCP connect timeouts
* convert valid time values into ms
Signed-off-by: Matt Miller <mamiller@rosettastone.com>
This moves Prometheus as a add-on, thus making it optional but enabled by default. The also make `linkerd-prometheus` more configurable, and allow it to have its own life-cycle for upgrades, configuration, etc.
This work will be followed by documentation that help users configure existing Prometheus to work with Linkerd.
**Changes Include:**
- moving prometheus manifests into a separate chart at `charts/add-ons/prometheus`, and adding it as a dependency to `linkerd2`
- implement the `addOn` interface to support the same with CLI.
- include configuration in `linkerd-config-addons`
**User Facing Changes:**
The default install experience does not change much but for users who have already configured Prometheus differently, would need to apply the same using the new configuration fields present in chart README
* feat: add log format annotation and helm value
Json log formatting has been added via https://github.com/linkerd/linkerd2-proxy/pull/500
but wiring the option through as an annotation/helm value is still
necessary.
This PR adds the annotation and helm value to configure log format.
Closes#2491
Signed-off-by: Naseem <naseem@transit.app>
In #4585 we are observing an issue where a loop is encountered when using nginx ingress. The problem is that the outbound proxy does a dst lookup on the IP address which happens to be the very same address the ingress is listening on.
In order to avoid situations like that this PR introduces a way to modify the set of networks for which the proxy shall do IP based discovery. The change introduces a helm flag `.Values.global.proxy.destinationGetNetworks` that can be used to modify this value. There are two ways a user can affect the this setting:
- setting the `destinationGetNetworks` field in values during a Helm install, which changes the default on all injected pods
- using an annotation ` config.linkerd.io/proxy-destination-get-networks` for injected workloads to override this value
Note that this setting cannot be tweaked through the `install` or `inject` command
Fix: #4585
Signed-off-by: Zahari Dichev <zaharidichev@gmail.com>
* Add namespace global flag to hold default namespace name (#4469)
Signed-off-by: Matei David <matei.david.35@gmail.com>
* Change name of controlplane install namespace constant and init point for kubeNamespace
Signed-off-by: Matei David <matei.david.35@gmail.com>
This change adds a `allow` and `link` commands, effectivelly enabling a cluster to have more than one set of credentials that allow it to be mirrored.
Fx #4461
Signed-off-by: Zahari Dichev <zaharidichev@gmail.com>
Co-authored-by: Alex Leong <alex@buoyant.io>
This is @psinghal20's changes in #4462 which is currently failing CI.
Fixes#4456
Description from the original PR:
> This pr renames the `cluster` command in CLI to `multicluster` command. It
> also adds a shorthand `mc` for easy use.
>
> Fixes#4456
>
> Signed-off-by: psinghal20 <psinghal20@gmail.com>
The CI failure doesn't seem to be related to this change, but has only been seen
on forks. Opening this from a non-fork for now to continue investigating.
Signed-off-by: Kevin Leimkuhler <kevin@kleimkuhler.com>
Co-authored-by: psinghal20 <psinghal20@gmail.com>
When using cli commands that work on namespaced resources in the cluster, the default namespace used by the cli is hardcoded to the default Kubernetes namespace (i.e 'default'). This update will allow cli commands that operate on namespaced resources to automatically infer what the name of the default namespace is, by taking the relevant default from the currently used Kubeconfig context. In short, this allows the omission of the -n flag in commands such as linkerd metrics, when working with resources that belong to a namespace that is set as default in the currently active context.
Validation was done manually by setting the default namespace of the currently used context, as well as through two integration tests that target the tap and get command respectively.
Signed-off-by: Matei David <matei.david.35@gmail.com>
* Some `linkerd stat` test failures were being hidden
`linkerd stat` was doing an early `os.Exit(0)` when no traffic was
found, which avoided `go test` to report any test failure that ended in
that code path.
This was hiding a mismatch in the golden files for HA after the
introduction of the rolling update strategy (#4267), and the failure of
`linkerd stat trafficsplit` not returning results unless `--unmeshed` is
used. For the latter, I added the flag to the tests in order to temporarly pass
them, but the underlying issue remains to be fixed in a separate
PR.
This PR introduces the `linkerd alpha stat` command which will eventually replace the `linkerd stat` command. This command functions in a similar way, but with slightly different arguments and is implemented using the smi-metrics API. This means that access to metrics can be controlled with RBAC.
See the `linkerd alpha stat` help text for full details, or try one of these commands:
* `linkerd alpha stat -n emojivoto deploy/web`
* `linkerd alpha stat -n emojivoto deploy`
* `linkerd alpha stat -n emojivoto deploy/web --to deploy/emoji`
Signed-off-by: Alex Leong <alex@buoyant.io>
This PR introduces a service mirroring component that is responsible for watching remote clusters and mirroring their services locally.
Signed-off-by: Zahari Dichev <zaharidichev@gmail.com>
* feat: added prometheus Registry Option for install command
* chore: draft commit
* Draft for custom prometheus image
* Support for custom prometheus image
This PR adds support to override the default prometheus image name and use custom image names in private repositories
* Added default Prometheus Image from values.yaml
The default can be overridden by the argument given in installOptions
* chore: fixed failing check
* Fixed fialing check
* Updated the tests as per the new flag
* Air-gapped installation for prometheus-image
* Air Gapped installation for Prometheus Image
* Added regex for prometheus repository/image cli option
Signed-off-by: Christy Jacob <christyjacob4@gmail.com>
* CLI command to fetch control plane metrics
Fixes#3116
* Add GetResonse method to return http GET response
* Implemented timeouts using waitgroups
* Refactor metrics command by extracting common code to metrics_diagnostics_util
* Refactor diagnostics to remove code duplication
* Update portforward_test for NewContainerMetricsForward function
* Lint code
* Incorporate Alex's suggestions
* Lint code
* fix minor errors
* Add unit test for getAllContainersWithPort
* Update metrics and diagnostics to store results in a buffer and print once
* Incorporate Ivan's suggestions
* consistent error handling inside diagnostics
* add coloring for the output
* spawn goroutines for each pod instead of each container
* switch back to unbuffered channel
* remove coloring in the output
* Add a long description of the command
Signed-off-by: Saurav Tiwary <srv.twry@gmail.com>
In light of the breaking changes we are introducing to the Helm chart and the convoluted upgrade process (see linkerd/website#647) an integration test can be quite helpful. This simply installs latest stable through helm install and then upgrades to the current head of the branch.
Signed-off-by: Zahari Dichev zaharidichev@gmail.com
**Subject**
Fixes bug where override of Docker registry was not being applied to debug containers (#3851)
**Problem**
Overrides for Docker registry are not being applied to debug containers and provide no means to correct the image.
**Solution**
This update expands the `data.proxy` configuration section within the Linkerd `ConfigMap` to maintain the overridden image name for debug containers at _install_-time similar to handling of the `proxy` and `proxyInit` images.
This change also enables the further override option of the registry for debug containers at _inject_-time given utilization of the `--registry` CLI option.
**Validation**
Several new unit tests have been created to confirm functionality. In addition, the following workflows were run through:
### Standard Workflow with Custom Registry
This workflow installs Linkerd control plane based upon a custom registry, then injecting the debug sidecar into a service.
* Start with a k8s instance having no Linkerd installation
* Build all images locally using `bin/docker-build`
* Create custom tags (using same version) for generated images, e.g. `docker tag gcr.io/linkerd-io/debug:git-a4ebecb6 javaducky.com/linkerd-io/debug:git-a4ebecb6`
* Install Linkerd with registry override `bin/linkerd install --registry=javaducky.com/linkerd-io | kubectl apply -f -`
* Once Linkerd has been fully initialized, you should be able to confirm that the `linkerd-config` ConfigMap now contains the debug image name, pull policy, and version within the `data.proxy` section
* Request injection of the debug image into an available container. I used the Emojivoto voting service as described in https://linkerd.io/2/tasks/using-the-debug-container/ as `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar - | kubectl apply -f -`
* Once the deployment creates a new pod for the service, inspection should show that the container now includes the "linkerd-debug" container name based on the applicable override image seen previously within the ConfigMap
* Debugging can also be verified by viewing debug container logs as `kubectl -n emojivoto logs deploy/voting linkerd-debug -f`
* Modifying the `config.linkerd.io/enable-debug-sidecar` annotation, setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Overriding the Custom Registry Override at Injection
This builds upon the “Standard Workflow with Custom Registry” by overriding the Docker registry utilized for the debug container at the time of injection.
* “Clean” the Emojivoto voting service by removing any Linkerd annotations from the deployment
* Request injection similar to before, except provide the `--registry` option as in `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar --registry=gcr.io/linkerd-io - | kubectl apply -f -`
* Inspection of the deployment config should now show the override annotation for `config.linkerd.io/debug-image` having the debug container from the new registry. Viewing the running pod should show that the `linkerd-debug` container was injected and running the correct image. Of note, the proxy and proxy-init images are still running the “original” override images.
* As before, modifying the `config.linkerd.io/enable-debug-sidecar` annotation setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Standard Workflow with Default Registry
This workflow is the typical workflow which utilizes the standard Linkerd image registry.
* Uninstall the Linkerd control plane using `bin/linkerd install --ignore-cluster | kubectl delete -f -` as described at https://linkerd.io/2/tasks/uninstall/
* Clean the Emojivoto environment using `curl -sL https://run.linkerd.io/emojivoto.yml | kubectl delete -f -` then reinstall using `curl -sL https://run.linkerd.io/emojivoto.yml | kubectl apply -f -`
* Perform standard Linkerd installation as `bin/linkerd install | kubectl apply -f -`
* Once Linkerd has been fully initialized, you should be able to confirm that the `linkerd-config` ConfigMap references the default debug image of `gcr.io/linkerd-io/debug` within the `data.proxy` section
* Request injection of the debug image into an available container as `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar - | kubectl apply -f -`
* Debugging can also be verified by viewing debug container logs as `kubectl -n emojivoto logs deploy/voting linkerd-debug -f`
* Modifying the `config.linkerd.io/enable-debug-sidecar` annotation, setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Overriding the Default Registry at Injection
This workflow builds upon the “Standard Workflow with Default Registry” by overriding the Docker registry utilized for the debug container at the time of injection.
* “Clean” the Emojivoto voting service by removing any Linkerd annotations from the deployment
* Request injection similar to before, except provide the `--registry` option as in `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar --registry=javaducky.com/linkerd-io - | kubectl apply -f -`
* Inspection of the deployment config should now show the override annotation for `config.linkerd.io/debug-image` having the debug container from the new registry. Viewing the running pod should show that the `linkerd-debug` container was injected and running the correct image. Of note, the proxy and proxy-init images are still running the “original” override images.
* As before, modifying the `config.linkerd.io/enable-debug-sidecar` annotation setting to “false”, should show that the pod will be recreated no longer running the debug container.
Fixes issue #3851
Signed-off-by: Paul Balogh javaducky@gmail.com
As part of the effort to remove the "experimental" label from the CNI plugin, this PR introduces cni checks to `linkerd check`
Signed-off-by: Zahari Dichev <zaharidichev@gmail.com>
* Enable mixed configuration of skip-[inbound|outbound]-ports using port numbers and ranges (#3752)
* included tests for generated output given proxy-ignore configuration options
* renamed "validate" method to "parseAndValidate" given mutation
* updated documentation to denote inclusiveness of ranges
* Updates for expansion of ignored inbound and outbound port ranges to be handled by the proxy-init rather than CLI (#3766)
This change maintains the configured ports and ranges as strings rather than unsigned integers, while still providing validation at the command layer.
* Bump versions for proxy-init to v1.3.0
Signed-off-by: Paul Balogh <javaducky@gmail.com>
* Inject preStop hook into the proxy sidecar container to stop it last
This commit adds support for a Graceful Shutdown technique that is used
by some Kubernetes administrators while the more perspective
configuration is being discussed in
https://github.com/kubernetes/kubernetes/issues/65502
The problem is that RollingUpdate strategy does not guarantee that all
traffic will be sent to a new pod _before_ the previous pod is removed.
Kubernetes inside is an event-driven system and when a pod is being
terminating, several processes can receive the event simultaneously.
And if an Ingress Controller gets the event too late or processes it
slower than Kubernetes removes the pod from its Service, users requests
will continue flowing into the black whole.
According [to the documentation](https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods)
> 1. If one of the Pod’s containers has defined a `preStop` hook,
> it is invoked inside of the container. If the `preStop` hook is still
> running after the grace period expires, step 2 is then invoked with
> a small (2 second) extended grace period.
>
> 2. The container is sent the `TERM` signal. Note that not all
> containers in the Pod will receive the `TERM` signal at the same time
> and may each require a preStop hook if the order in which
> they shut down matters.
This commit adds support for the `preStop` hook that can be configured
in three forms:
1. As command line argument `--wait-before-exit-seconds` for
`linkerd inject` command.
2. As `linkerd2` Helm chart value `Proxy.WaitBeforeExitSeconds`.
2. As `config.alpha.linkerd.io/wait-before-exit-seconds` annotation.
If configured, it will add the following preHook to the proxy container
definition:
```yaml
lifecycle:
preStop:
exec:
command:
- /bin/bash
- -c
- sleep {{.Values.Proxy.WaitBeforeExitSeconds}}
```
To achieve max benefit from the option, the main container should have
its own `preStop` hook with the `sleep` command inside which has
a smaller period than is set for the proxy sidecar. And none of them
must be bigger than `terminationGracePeriodSeconds` configured for the
entire pod.
An example of a rendered Kubernetes resource where
`.Values.Proxy.WaitBeforeExitSeconds` is equal to `40`:
```yaml
# application container
lifecycle:
preStop:
exec:
command:
- /bin/bash
- -c
- sleep 20
# linkerd-proxy container
lifecycle:
preStop:
exec:
command:
- /bin/bash
- -c
- sleep 40
terminationGracePeriodSeconds: 160 # for entire pod
```
Fixes#3747
Signed-off-by: Eugene Glotov <kivagant@gmail.com>
Similar to `kubectl --as`, global flag across all linkerd subcommands
which sets a `ImpersonationConfig` in the Kubernetes API config.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Allow custom cluster domain in destination watcher
The change relaxes the constrains of an authority requiring a
`svc.cluster.local` suffix to only require `svc` as third part.
A unit test could be added though the destination/server and endpoint
watcher already test this behaviour.
* Update proto to allow setting custom cluster domain
Update golden templates
* Allow setting custom domain in grpc, web server
* Remove cluster domain flags from web srv and public api
* Set defaultClusterDomain in validateAndBuild if none is set
Signed-off-by: Armin Buerkle <armin.buerkle@alfatraining.de>
Split proxy-init into separate repo
Fixes#2563
The new repo is https://github.com/linkerd/linkerd2-proxy-init, and I
tagged the latest there `v1.0.0`.
Here, I've removed the `/proxy-init` dir and pinned the injected
proxy-init version to `v1.0.0` in the injector code and tests.
`/cni-plugin` depends on proxy-init, so I updated the import paths
there, and could verify CNI is still working (there is some flakiness
but unrelated to this PR).
For consistency, I added a `--init-image-version` flag to `linkerd
inject` along with its corresponding override config annotation.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Adds an edges command to the CLI. `linkerd edges` displays connections between resources, and Linkerd proxy identities. Currently this feature will only display edges where both the client identity and server identity are known. The next step will be to display edges for which identity is not known and/or one-sided traffic such as Prometheus and tap requests.
Support for resources opting out of tap
Implements the `linkerd inject --disable-tap` flag (although hidden pending #2811) and the config override annotation `config.linkerd.io/disable-tap`.
Fixes#2778
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Add config.linkerd.io/disable-identity annotation
First part of #2540
We'll tackle support for `--disable-identity` in `linkerd install` in a
separate commit.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* The 'linkerd-version' CLI flag is renamed to 'control-plane-version'
* Add version field to proxy config
* Add the control plane version to the global config
* Unit test for init image version
* Use more specific control plane and proxy versions in unit tests
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Disable external profiles by default
* Rename the --disable-external-profiles flag to --enable-external-profiles
Signed-off-by: Ivan Sim <ivan@buoyant.io>
The `install` command errors when the deploy target contains an existing
Linkerd deployment. The `upgrade` command is introduced to reinstall or
reconfigure the Linkerd control plane.
Upgrade works as follows:
1. The controller config is fetched from the Kubernetes API. The Public
API is not used, because we need to be able to reinstall the control
plane when the Public API is not available; and we are not concerned
about RBAC restrictions preventing the installer from reading the
config (as we are for inject).
2. The install configuration is read, particularly the flags used during
the last install/upgrade. If these flags were not set again during the
upgrade, the previous values are used as if they were passed this time.
The configuration is updated from the combination of these values,
including the install configuration itself.
Note that some flags, including the linkerd-version, are omitted
since they are stored elsewhere in the configurations and don't make
sense to track as overrides..
3. The issuer secrets are read from the Kubernetes API so that they can
be re-used. There is currently no way to reconfigure issuer
certificates. We will need to create _another_ workflow for
updating these credentials.
4. The install rendering is invoked with values and config fetched from
the cluster, synthesized with the new configuration.
When installing Linkerd, a user may override default settings, or may
explicitly configure defaults. Consider install options like `--ha
--controller-replicas=4` -- the `--ha` flag sets a new default value for
the controller-replicas, and then we override it.
When we later upgrade this cluster, how can we know how to configure the
cluster?
We could store EnableHA and ControllerReplicas configurations in the
config, but what if, in a later upgrade, the default value changes? How
can we know whether the user specified an override or just used the
default?
To solve this, we add an `Install` message into a new config.
This message includes (at least) the CLI flags used to invoke
install.
upgrade does not specify defaults for install/proxy-options fields and,
instead, uses the persisted install flags to populate default values,
before applying overrides from the upgrade invocation.
This change breaks the protobuf compatibility by altering the
`installation_uuid` field introduced in 9c442f6885.
Because this change was not yet released (even in an edge release), we
feel that it is safe to break.
Fixes https://github.com/linkerd/linkerd2/issues/2574
Because the linkerd-config resource is created after pods that require
it, they can be started before the files are mounted, causing the pods
to restart integration tests to fail.
If we extract the config into its own template file, it can be inserted
before pods are created.
The introduction of identity in 0626fa37 created new state in the
control plane's configuration that must be considered when re-installing
the control plane or when injecting pods.
This change alters `install` to fail if it would seem to conflict with
an existing installation. This behavior may be disabled with the
`--ignore-cluster` flag.
Furthermore, `inject` now _requires_ that it can fetch a configuration
from the control plane in order to operate. Otherwise the
`--ignore-cluster` and `--disable-identity` flags must be specified.
This change does not actually instrument pods to use identity yet---it
lays the framework for proxy identity without changing the test fixture
output (besides a change to how identity HA is configured).
Fixes#2531
Currently, cli/cmd/root.go provides a couple of utilities for building
clients to Linkerd's Public API; however these utilities are infallible,
execute health checks, etc.
There are a class of API clients---for instance, when an inject command
wants to acquire configuration from the API---where these checks are
undesirable. The version CLI built such a client, for example.
This change consolidates the various utilities into a single file.
Furthermore, it renames these utilities to clarify they differ.
The new proxy has changed its configuration as follows:
- `LISTENER` urls are now `LISTEN_ADDR` addresses;
- `CONTROL_URL` is now `DESTINATION_SVC_ADDR`;
- `*_NAMESPACE` vars are no longer needed;
- The `PROXY_ID` is now the `DESTINATION_CONTEXT`;
- The "metrics" port is now the "admin" port, since it serves more than
just metrics;
- A readiness probe now checks a dedicated /ready endpoint eagerly.
Identity injection is **NOT** configured by this branch.
The proxy's TLS implementation has changed to use a new _Identity_ controller.
In preparation for this, the `--tls=optional` CLI flag has been removed
from install and inject; and the `ca` controller has been deleted. Metrics
and UI treatments for TLS have **not** been removed, as they will continue to
be valuable for the new Identity system.
With the removal of the old identity scheme, the Destination service's proxy
ID field is now set with an opaque string (e.g. `ns:emojivoto`) to enable
locality awareness.
It's sometimes helpful to spotcheck proxy metrics from a specific pod,
but doing so with kubectl requires a few steps.
Introduce a new `linkerd metrics` command. When given a pod name and
namespace, returns a dump of the proxy's /metrics endpoint.
Also modify the k8s.portforward module to accept initialized k8s config
and client objects, to enable testing.
Fixes#2350.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
jiraguha
Tarun Pothulapati
Alex Leong
Alejandro Pedraza
cpretzer
Matt Miller
Naseem
Zahari Dichev
Matei David
Kevin Leimkuhler
Mayank Shah
Christy Jacob
Saurav Tiwary
Paul Balogh
Eugene Glotov
Andrew Seigner
arminbuerkle
Carol A. Scott
Alejandro Pedraza
Ivan Sim
harsh jain
Oliver Gould
Andrew Seigner