When a resource has no tap events being streamed to the Tap UI, and a user hits the "Stop" button in the Tap page, the tap stream is left open due to the WebSocket connection not being closed.
It looks like the web server's tap client that is created to stream events from the tap server blocks the main request thread in the web server. This causes the web server to stop receiving any subsequent close frames from the UI i.e. when the "Stop" button is clicked.
This PR moves the tapClient initialization code to a separate goroutine, specifically, the goroutine that reads tap events from the incoming grpc tap stream. This allows the main thread to continue reading messages from the WebSocket connection and allow it to receive close frames.
fixes#1665
Signed-off-by: Dennis Adjei-Baah <dennis@buoyant.io>
Adds a new page that shows all namespaces in an accordion. This will replace
ServiceMesh as the default landing page.
The page will request stats for all namespaces, and then pick the first meshed
namespace that's not the linkerd namespace to auto-expand in the accordion.
This branch also updates the definition of "added to the mesh" in the frontend
to be runningPodCount > 0 && meshedPodCount > 0 (previously, it was
runningPodCount === meshedPodCount, which would count resources with no pods as
"added").
I've also moved the link to /namespaces out of the top-level sidebar and into
the Resources sub-menu.
Previously, WebSocket error messages would appear with the first
couple characters cut off. I've fixed this by using ws.WriteControl
instead of ws.WriteMessage to write errors, as gorilla does in
their example app.
- Use writeControl to write error messages to the client
- Stop the spinner if there is an error present
Increase the MaxRps on the tap server to 100 RPS.
The max RPS for tap/top was increased in for the CLI #1531, but we were
still manually setting this to 1 RPS in the Web UI and Web server.
Remove the pervasive setting of MaxRps to 1 in the web frontend and server
Add a Top page to the linkerd web UI. This is the web equivalent of #1435.
I've used the same fields as in the current implementation.
This branch also includes some slight refactors to the Tap code to enable code reuse.
The request processing logic is pretty similar to that in Tap.jsx, except that we can
immediately discard the result once we receive the response end and aggregate
that result into the top results. So the index of tap results will tend to be smaller
(unless they're long running requests like streaming). But we also add a similar
index of aggregated Top results, and discard oldest results if top has been
running for a long time.
* Add a Top page to the web UI
* Refactor Tap event parsing into common util code
* Small refactors to the TapQueryForm and the CliCmd display to accomodate Top
* Collate tap events based on the ID (src, dst, stream)
* Also refactor keying of req/rsp/end into requestInit/responseInit/responseEnd for clarity
* Use pod labels when present in top
* Fix bug where src/dst were switched in the Tap display table
* Make use of the Web UI to render tap events in a table
- Return JSON tap events instead of the command line output
- Experiment with a different way of rendering the EventList
- changed the default width back to 100% of the screen because this
table does not look great squished
Adds a tap endpoint in the web api that communicates with the dashboard
via websockets.
I've moved a bunch of code from the cli tap.go into utils so that the code
can be shared between web and CLI. I think we should consider making the
display more suited to web, but in the short term, reusing the CLI's
rendering of tap events works.
Adds a Tap page in the Web UI that you can use to make tap requests.
The form currently only allows you to enter a resource and namespace,
other filters coming in a follow-up branch.
This PR begins to migrate Conduit to Linkerd2:
* The proxy has been completely removed from this repo, and is now located at
github.com/linkerd/linkerd2-proxy.
* A `Dockerfile-proxy` has been added to fetch the most-recently published proxy
binary from build.l5d.io.
* Proxy-specific protobuf bindings have been moved to
github.com/linkerd/linkerd2-proxy-api.
* All docker images now use the gcr.io/linkerd-io registry.
* `inject` now uses `LINKERD2_PROXY_` environment variables
* Go paths have been updated to reflect the new (future) repo location.
- Return pod uptimes from the GetPods endpoint
- Adds filtering by namespace to api.GetPods
- Adds a --namespace filter to conduit get pods
- Adds pod uptimes to the controller component toolitps on the ServiceMesh page
- Moves the ServiceMesh page back to using /api/pods
Adds the ability to query by a new non-kubernetes resource type, "authorities",
in the StatSummary api.
This includes an extensive refactor of stat_summary.go to deal with non-kubernetes
resource types.
- Add documentation to Resource in the public api so we can use it for authority
- Handle non-k8s resource requests in the StatSummary endpoint
- Rewrite stat summary fetching and parsing to handle non-k8s resources
- keys stat summary metric handling by Resource instead of a generated string
- Adds authority to the CLI
- Adds /authorities to the Web UI
- Adds some more stat integration and unit tests
Don't allow the CLI or Web UI to request named resources if --all-namespaces is used.
This follows kubectl, which also does not allow requesting named resources
over all namespaces.
This PR also updates the Web API's behaviour to be in line with the CLI's.
Both will now default to the default namespace if no namespace is specified.
Common blacklists have `/api/stat` in them. This causes the dashboard to not load.
`/api/tps-reports` is not in any blacklists, suggests what this route does and is slightly tongue in cheek. Fixes#970
Problem
If you navigate directly to (or do a hard refresh on) a path with more than one segment,
e.g. http://localhost:8084/namespaces/conduit, the dashboard js is not served.
Pages with two paths have to be accessed by loading the dashboard on a different
path and then clicking through.
When accessing the dashboard via conduit dashboard we append a path prefix so that
we can connect using the k8s proxy. This means that moving the dashboard to serve
images off relative paths won't work, because we need to serve images whether the
dashboard is loaded from http://localhost:8084/namespaces/conduit or
from http://localhost:8084/namespaces.
Solution
Check whether we're serving the dashboard with the proxy url, and if we are, adjust
the url at which we serve the index bundle from.
I've also added a very manual override if the conduit logo can't be found at the usual url.
Add namespaces as a top level resource in the Web UI
This PR does the following:
- Replace the deployments table in the service mesh page with namespaces
- Add a Namespaces index page that lists all namespaces and their stats
- Add an individual namespace page showing all resources for that namespace
- Make the incomplete mesh message more generic to any resource type
- Revamp rest of service mesh page to move off ListPods
* Add a Replication Controllers page in the Web UI
@siggy pointed out that we don't need to use the PodsList api any more, since the new stats endpoint (#671) includes meshedPodCount and totalPodCount, which is all we need to determine whether the deployment/rc has been added to the mesh (which is what we were using ListPods to determine).
This PR modifies deployments to not use the pods api any more, and adds a Replication Controllers page. This page is quite similar to the Deployments page in logic, so I've made a PodOwnersList component to share the code.
I haven't added Replication Controllers to the Service Mesh page yet, because that page does require a list of component pods. Also, we don't need the calls to Prometheus for the Service Mesh page, so I don't want to use the existing stat apis for it. I figure that is a large enough change for a separate PR.
* Expose pod stats in CLI, web UI, and Grafana
* Fix js api helpers test
* Add outbound traffic stats to pod dashboard
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Add namespace as a resource type in public-api
The cli and public-api only supported deployments as a resource type.
This change adds support for namespace as a resource type in the cli and
public-api. This also change includes:
- cli statsummary now prints `-`'s when objects are not in the mesh
- cli statsummary prints `No resources found.` when applicable
- removed `out-` from cli statsummary flags, and analagous proto changes
- switched public-api to use native prometheus label types
- misc error handling and logging fixes
Part of #627
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Refactor filter and groupby label formulation
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Rename stat_summary.go to stat.go in cli
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Update rbac privileges for namespace stats
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Start implementing new conduit stat summary endpoint.
Changes the public-api to call prometheus directly instead of the
telemetry service. Wired through to `api/stat` on the web server,
as well as `conduit statsummary` on the CLI. Works for deployments only.
Current implementation just retrieves requests and mesh/total pod count
(so latency stats are always 0).
Uses API defined in #663
Example queries the stat endpoint will eventually satisfy in #627
This branch includes commits from @klingerf
* run ./bin/dep ensure
* run ./bin/update-go-deps-shas
- reduce row spacing on tables to make them more compact
- Rename TabbedMetricsTable to MetricsTable since it's not tabbed any more
- Format latencies greater than 1000ms as seconds
- Make sidebar collapsible
- poll the /pods endpoint from the sidebar in order to refresh the list of deployments in the autocomplete
- display the conduit namespace in the service mesh details table
- Use floats rather than Col for more responsive layout (fixes#224)
Follow-up from #315.
Now that the UIs don't report per-path metrics, we can remove the path label from Prometheus, the path aggregation and filtering options from the telemetry API, and the path field from the proxy report API.
I've modified the tests to no longer expect the removed fields, and manually verified that Conduit still works after making these changes.
Closes#265
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
This PR updates the web UI to remove the pod detail page, and to remove the links to that page from pod names in metrics tables. It also removes the `pods` option from `conduit stat`, and the `sourcePod` and `targetPod` fields from the controller API proto's `MetricMetadata` message.
I've updated the `conduit stat` tests to reflect these changes, and manually verified the web UI changes.
Closes#261
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
We added basic prometheus instrumentation, but this only encapsulated basic go metrics and
request counts. This adds latency and response size metrics exporting as well, to the
public-api server, theweb server and the telemetry server.
Since the util function in grpc.go was basically used to wrap the server creation in a prometheus handler, I added the other prometheus constants in there and renamed the file to prometheus.go.
- Add request duration and response size instrumentation to web and public api
- Also add latency monitoring to telemetry service requests
- Rename util/grpc.go to util/prometheus.go
* Abstract Conduit API client from protobuf interface to add new features
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Consolidate mock api clients
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Add simple implementation of healthcheck for conduit api
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Change NextSteps to FriendlyMessageToUser
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Add grpc check for status on the client
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Add simple server-side check for Conduit API
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Fix feedback from PR
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Add /paths page that shows rollup metrics by path
* Clean up ApiHelpers a bit
Adds ability to sort by column in the tabbed metrics table (to make a TabbedMetricsTable sortable, set sortable={true})
Adds a page, accessible via /paths that shows a table of all paths, with their request/success/latency metrics. I haven't exposed it in the sidebar as it doesn't have design treatment.
* Sort imports
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Upgrade k8s.io/client-go to v6.0.0
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Make k8s store initialization blocking with timeout
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Remove integration test clause from travis file
* Use correct channel for asyn process error reporting
* Fix test for sorting stat keys
* Make integration tests only run if CONDUIT_INTEGRATION_TESTS_ENABLED is set
* Fix timeouts in tests
* Fix handler test check for version
* Removes smoke test that required kubectl as not present on travis
* Replace tail with sleep to avoid leaking subprocesses during tests
* Fix typo & extract constant
* Add support for path stats in cli and web api
The cli stat command supports grouping by pod and deployment. With this
change, it will also support grouping by path, in order to facilitate a
summary stats per individual endpoint.
* Right-align numeric columns in stat output
We’ve built Conduit from the ground up to be the fastest, lightest,
simplest, and most secure service mesh in the world. It features an
incredibly fast and safe data plane written in Rust, a simple yet
powerful control plane written in Go, and a design that’s focused on
performance, security, and usability. Most importantly, Conduit
incorporates the many lessons we’ve learned from over 18 months of
production service mesh experience with Linkerd.
This repository contains a few tightly-related components:
- `proxy` -- an HTTP/2 proxy written in Rust;
- `controller` -- a control plane written in Go with gRPC;
- `web` -- a UI written in React, served by Go.
Kevin Lingerfelt
Dennis Adjei-Baah
Risha Mars
Alex Leong
Oliver Gould
Thomas Rampelberg
Andrew Seigner
Eliza Weisman
Phil Calçado
Dennis Adjei-Baah