Fixes#2377
In inject's ResourceConfig, renamed objMeta to podMeta since
it really points to the pod template metadata. And created a new field
workloadMeta that really points to the main workload (e.g. Deployment) metadata.
Refactored uninject to clean up the labels at both podMeta and
workloadMeta. Also it will remove all the labels and annotations that
start with "linkerd.io" except for the "linkerd.io/inject" annotation.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
The `linkerd-init` container requires the NET_ADMIN capability to modify
iptables. The `linkerd check` command was not verifying this.
Introduce a `has NET_ADMIN capability` check, which does the following:
1) Lists all available PodSecurityPolicies, if none found, returns
success
2) For each PodSecurityPolicy, validate one exists that:
- the user has `use` access AND
- provides `*` or `NET_ADMIN` capability
A couple limitations to this approach:
- It is testing whether the user running `linkerd check` has NET_ADMIN,
but during installation time it will be the `linkerd-init` pod that
requires NET_ADMIN.
- It assumes the presense of PodSecurityPolicies in the cluster means
the PodSecurityPolicy admission controller is installed. If the
admission controller is not installed, but PSPs exists that restrict
NET_ADMIN, `linkerd check` will incorrectly report the user does not
have that capability.
This PR also fixes the `can create CustomResourceDefinitions` check to
not specify a namespace when doing a `create` check, as CRDs are
cluster-wide.
Fixes#1732
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
- Created the pkg/inject package to hold the new injection shared lib.
- Extracted from `/cli/cmd/inject.go` and `/cli/cmd/inject_util.go`
the core methods doing the workload parsing and injection, and moved them into
`/pkg/inject/inject.go`. The CLI files should now deal only with
strictly CLI concerns, and applying the json patch returned by the new
lib.
- Proceeded analogously with `/cli/cmd/uninject.go` and
`/pkg/inject/uninject.go`.
- The `InjectReport` struct and helping methods were moved into
`/pkg/inject/report.go`
- Refactored webhook to use the new injection lib
- Removed linkerd-proxy-injector-sidecar-config ConfigMap
- Added the ability to add pod labels and annotations without having to
specify the already existing ones
Fixes#1748, #2289
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
As described in #2217, the controller returns TLS identities for results even
when the destination pod may not be able to participate in identity
requester: specifically, the other pod may not have the same controller
namespace or it may not be injected with identity.
This change introduces a new annotation, linkerd.io/identity-mode that is set
when injecting pods (via both CLI and webhook). This annotation is always
added.
The destination service now only returns TLS identities when this annotation
is set to optional on a pod and the destination pod uses the same controller.
These semantics are expected to change before the 2.3 release.
Fixes#2217
We currently set klog to maximum verbosity when debug logging is
enabled. This causes control plane components, however, to log their
serviceaccount tokens, leaking secret information into logs.
By setting the klog level to 6, we avoid this logging.
Fixes#2383
The control-plane components relied on a `--single-namespace` param,
passed from `linkerd install` into each individual component, to
determine which namespaces they were authorized to access, and whether
to support ServiceProfiles. This command-line flag was redundant given
the authorization rules encoded in the parent `linkerd install` output,
via [Cluster]Role[Binding]s.
Modify the control-plane components to query Kubernetes at startup to
determine which namespaces they are authorized to access, and whether
ServiceProfile support is available. This allows removal of the
`--single-namespace` flag on the components.
Also update `bin/test-cleanup` to cleanup the ServiceProfile CRD.
TODO:
- Remove `--single-namespace` flag on `linkerd install`, part of #2164
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Hint URLs should display for all failed checks in `linkerd check`, but
were not displaying for RPC checks.
Fix `runCheckRPC` to pass along the hintAnchor to the check result.
Also rename the second `can query the control plane API` to
`control plane self-check`, as there were two checks with that name.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
gosimple is a Go linter that specializes in simplifying code
Also fix one spelling error in `cred_test.go`
Part of #217
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
In preparation for creating an Identity service that can chain off of an
existing CA, it's necessary to both (1) be able to create an
intermediate CA that can be used by the identity service and (2) be able
to load a CA from existing key material.
This changes the public API of the `tls` package to deal in actual key
types (rather than opaque blobs) and provides a set of helpers that can
be used to convert these credentials between common formats.
The control-plane's clients, specifically the Kubernetes clients, did
not provide telemetry information.
Introduce a `prometheus.ClientWithTelemetry` wrapper to instrument
arbitrary clients. Apply this wrapper to Kubernetes clients.
Fixes#2183
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
# Problem
When a route does not specify a timeout, the proxy-api defaults to the default
timeout and logs an error:
```
time="2019-02-13T16:29:12Z" level=error msg="failed to parse duration for route POST /io.linkerd.proxy.destination.Destination/GetProfile: time: invalid duration"
```
# Solution
We now check if a route timeout is blank. If it is not set, it is set to
`DefaultRouteTimeout`. If it is set, we try to parse it into a `Duration`.
A request was made to improve logging to include the service profile and
namespace as well.
# Validation
With valid service profiles installed, edit the `.yaml` to include an invalid
`timeout`:
```
...
name: GET /
timeout: foo
```
We should now see the following errors:
```
proxy-api time="2019-02-13T22:27:32Z" level=error msg="failed to parse duration for route 'GET /' in service profile 'webapp.default.svc.cluster.local' in namespace 'default': time: invalid duration foo"
```
This error does not show up when `timeout` is blank.
Fixes#2276
Signed-off-by: Kevin Leimkuhler <kevinl@buoyant.io>
`golangci-lint` performs numerous checks on Go code, including golint,
ineffassign, govet, and gofmt.
This change modifies `bin/lint` to use `golangci-lint`, and replaces
usage of golint and govet.
Also perform a one-time gofmt cleanup:
- `gofmt -s -w controller/`
- `gofmt -s -w pkg/`
Part of #217
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The existing hint URLs printing by `linkerd check` pointed to locations
that would change if the linkerd.io website was reorganized.
linkerd/website#148 introduces an alias for hint URLs at
https://linkerd.io/checks/. This is the corresponding change to update
`linkerd check` output.
Depends on linkerd/website#148, relates to linkerd/website#146.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Fixes#2220
The service profile validation which is part of `linkerd check` only validates service profiles in the Linkerd namespace. Due to a recent change, service profiles now can exist in any namespace.
Update the logic so that service profiles in all namespaces are validated.
Additionally:
* Relax validation of service profile names to support external names
Signed-off-by: Alex Leong <alex@buoyant.io>
Fixes#2077
When looking up service profiles, Linkerd always looks for the service profile objects in the Linkerd control namespace. This is limiting because service owners who wish to create service profiles may not have write access to the Linkerd control namespace.
Instead, we have the control plane look for the service profile in both the client namespace (as read from the proxy's `proxy_id` field from the GetProfiles request and from the service's namespace. If a service profile exists in both namespaces, the client namespace takes priority. In this way, clients may override the behavior dictated by the service.
Signed-off-by: Alex Leong <alex@buoyant.io>
The `linkerd check` command was doing limited validation on
ServiceProfiles.
Make ServiceProfile validation more complete, specifically validate:
- types of all fields
- presence of required fields
- presence of unknown fields
- recursive fields
Also move all validation code into a new `Validate` function in the
profiles package.
Validation of field types and required fields is handled via
`yaml.UnmarshalStrict` in the `Validate` function. This motivated
migrating from github.com/ghodss/yaml to a fork, sigs.k8s.io/yaml.
Fixes#2190
The Proxy API service lacked introspection of its internal state.
Introduce a new gRPC Discovery API, implemented by two servers:
1) Proxy API Server: returns a snapshot of discovery state
2) Public API Server: pass-through to the Proxy API Server
Also wire up a new `linkerd endpoints` command.
Fixes#2165
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The controller logs innocuous messages when control plane proxies aren't ready to route requests during startup from each control plane component. i.e. tap, public-api and proxy-api. Setting the log level in the control plane to `INFO` would not hide these log messages and would still show up on control plane startup.
This PR modifies `klogs` initial flag set to route innocuous logs to `/dev/null` if the controller log level is set to INFO. If set to debug, we output all loglines to stderr.
Fixes#2171#2168
Signed-off-by: Dennis Adjei-Baah <dennis@buoyant.io>
Adds the ability to generate a service profile by running a tap for a configurable
amount of time, and using the route results from the routes seen during the tap.
e.g. `linkerd profile web --tap deploy/web -n emojivoto --tap-duration 2s`
Consolidate timeouts for `linkerd check`
- Moved the creation of contexts from inside the methods targeted by the
checks into a single place in the runCheck() and runCheckRPC() methods
where the context is built using a hard-coded timeout of 30 seconds.
- k8s' client-go doesn't allow passing along contexts, but it let's us
setting the Timeout manually.
- Reworded the description for the --wait option.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Since 37ae423, deployments have been prefixed with linkerd-; however
the inject logic was not changed to take this into consideration when
constructing the controller's identity.
This means that the proxy's client to the control plane has been unable to
establish TLS'd communcation to the proxy-api. Previously, the proxy would
silently fall back to plaintext, but in master this behavior recently changed to
be stricter, so this bug will prevent the proxy from connecting to proxy-api
in any way.
* Add pod spec annotation to disable injection in CLI and auto-injector
* Remove support for linkerd.io/auto-inject label entirely
* Update based on review feedback
* Fix issue with finding the namespace of deployments applied to the default ns
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Fixes#2042
Adds a new field to service profile routes called `timeout`. Any requests to that route which take longer than the given timeout will be aborted and a 504 response will be returned instead. If the timeout field is not specified, a default timeout of 10 seconds is used.
Signed-off-by: Alex Leong <alex@buoyant.io>
linkerd/website#105 introduced a FAQ page, providing resolutions for all
`linkerd check` failures.
Update each check to reference its corresponding section in the FAQ.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Use `ca.NewCA()` for generating certs and keys for the proxy injector
- Remove from CA controller everything that dealt with the
webhook/proxy-injector
- Remove no longer needed proxy-injector volumes for 'trust-anchors' and
'webhook-secrets'
- Remove from the proxy-injector the retrieval of the trust anchor and
secrets
- tls flag during install is no longer needed for auto-inject to work
Fixes#2095 and fixes#2166
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Update client-go to 1.13.1
Fixes#2145
* Update Dockerfile-bin with new tag
* Update all the dockerfile tags
* Clean gopkg and do not apply cluster defaults
* Update for klog
* Match existing behavior with klog
* Add klog to gopkg.lock
* Update go-deps shas
* Update klog comment
* Update comment to be a non-sentence
When `GetProfiles` is called for a destination that does not have a service profile, the proxy-api service does not return any messages until a service profile is created for that service. This can be interpreted as hanging, and can make it difficult to calculate response latency metrics.
Change the behavior of the API to always return a service profile message immediately. If the service does not have a service profile, the default service profile is returned.
Signed-off-by: Alex Leong <alex@buoyant.io>
DaemonSet stats are not currently shown in the cli stat command, web ui
or grafana dashboard. This commit adds daemonset support for stat.
Update stat command's help message to reference daemonsets.
Update the public-api to support stats for daemonsets.
Add tests for stat summary and api.
Add daemonset get/list/watch permissions to the linkerd-controller
cluster role that's created using the install command.
Update golden expectation test files for install command
yaml manifest output.
Update web UI with daemonsets
Update navigation, overview and pages to list daemonsets and the pods
associated to them.
Add daemonset paths to server, and ui apps.
Add grafana dashboard for daemonsets; a clone of the deployment
dashboard.
Update dependencies and dockerfile hashes
Add DaemonSet support to tap and top commands
Fixes of #2006
Signed-off-by: Zak Knill <zrjknill@gmail.com>
When running Linkerd check with a control plane namespace that may contain an additional pod with a replication controller ID for pod names instead of a replicaSet ID, the check command panics because of an "index out of bounds" error.
This PR adds a check to make sure that, when parsing pod names during the `checkControllerRunning` healthcheck, we only check for linkerd control plane pods and that the pod name results in four or more substrings when split on '-'. This prevents the check from panicking when encountering a replication controller ID pod name.
Fixes#2084
Signed-off-by: Dennis Adjei-Baah <dennis@buoyant.io>
When a failing check is being retried, we show the current err to the user. This
can sometimes be unnecessarily alarming, as in the case of the control plane
starting up.
If a failing check is in the process of being retried, wait to show the final
error message until the retries have completed.
Previously, we were doing the creation checks for both Roles/RoleBindings and
ClusterRoles/ClusterRoleBindings for all namespaces, but in --single-namespace
mode, we only need to check that these can be created in the control plane
namespace.
Version checks were not validating that the cli version matched the
control plane or data plane versions.
Add checks via the `linkerd check` command to validate the cli is
running the same version as the control and data plane.
Also add types around `channel-version` string parsing and matching. A
consequence being that during development `version.Version` changes from
`undefined` to `dev-undefined`.
Fixes#2076
Depends on linkerd/website#101
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Introduce resource selector and deprecate namespace field for ListPods
* Changes from code review
* Properly deprecate the field
* Do not check for nil
* Fix the mockProm usage
* Protoc changes revert
* Changed from code review
Signed-off-by: Alena Varkockova <varkockova.a@gmail.com>
* When injecting, perform an uninject as a first step
Fixes#1970
The fixture `inject_emojivoto_already_injected.input.yml` is no longer
rejected, so I created the corresponding golden file.
Note that we'll still forbid injection over resources already injected
with third party meshes (Istio, Contour), so now we have
`HasExisting3rdPartySidecars()` to detect that.
* Generalize HasExistingSidecars() to cater for both the auto-injector and
* Convert `linkerd uninject` result format to the one used in `linkerd inject`.
* More updates to the uninject reports. Revert changes to the HasExistingSidecars func.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
The outputs of the `check` and `inject` commands did not vary much
between successful and failed executions, and were a bit verbose and
challenging to parse.
Reorganize output of `check` and `inject` commands, to provide more
output when errors occur, and less output when successful.
Specific changes:
`linkerd check`
- visually group checks by category
- introduce `hintURL`'s, to provide doc links when checks fail
- add spinners when retrying, remove additional retry lines
- colored unicode characters to indicate success/warning/failure
`linkerd inject`
- modify default output to mirror `kubectl apply`
- only output non-successful inject reports
- support `--verbose` flag to output all inject reports
Fixes#1471, #1653, #1656, #1739
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The linkerd check command organized the various checks via loosely
coupled category IDs, category names, and checkers themselves, all with
ordering defined by consumers of this code.
This change removes category IDs in favor of category names, groups all
checkers by category, and enforces ordering at the HealthChecker
level.
Part of #1471, depends on #2078.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The set of health checks to be executed were dependent on a combination
of check enums and boolean options.
This change modifies the health checks to be governed strictly by a set
of enums.
Next steps:
- tightly couple category IDs to names
- tightly couple checks to their parent categories
- programmatic control over check ordering
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Add `linkerd uninject` command
uninject.go iterates through the resources annotations, labels,
initContainers and Containers, removing what we know was injected by
linkerd.
The biggest part of this commit is the refactoring of inject.go, to make
it more generic and reusable by uninject.
The idea is that in a following PR this functionality will get reused by
`linkerd inject` to uninject as as preliminary step to injection, as a
solution to #1970.
This was tested successfully on emojivoto with:
```
1) inject:
kubectl get -n emojivoto deployment -o yaml | bin/linkerd inject - |
kubectl apply -f -
2) uninject:
kubectl get -n emojivoto deployment -o yaml | bin/linkerd uninject - |
kubectl apply -f -
```
Also created unit tests for uninject.go. The fixture files from the inject
tests could be reused. But as now the input files act as outputs, they
represent existing resources and required these changes (that didn't
affect inject):
- Rearranged fields in alphabetical order.
- Added fields that are only relevant for existing resources (e.g.
creationTimestamp and status.replicas in StatefulSets)
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Setup port-forwarding for linkerd dashboard command
* Output port-forward logs when --verbose flag is set
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Commit 1: Enable lint check for comments
Part of #217. Follow up from #1982 and #2018.
A subsequent commit will fix the ci failure.
Commit 2: Address all comment-related linter errors.
This change addresses all comment-related linter errors by doing the
following:
- Add comments to exported symbols
- Make some exported symbols private
- Recommend via TODOs that some exported symbols should should move or
be removed
This PR does not:
- Modify, move, or remove any code
- Modify existing comments
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Rename snake case fields to camel case in service profile spec. This improves the way they are rendered when the `kubectl describe` command is used.
Signed-off-by: Alex Leong <alex@buoyant.io>
We rename path to path_regex in the ServiceProfile CRD to make it clear that this field accepts a regular expression. We also take this opportunity to remove unnecessary line anchors from regular expressions now that these anchors are added in the proxy.
Signed-off-by: Alex Leong <alex@buoyant.io>
Adds an endpoint, at /profiles/new that allows you to input a service name and
namespace, and download a service profile yaml template.
This will enable future work, where we can add more of the yaml customization via
a form in the dashboard, and use that data to help the user configure routes.
Filtering by Kubernetes job was not supported. Also filtering by any unknown
type caused a panic.
Add filtering support by Kubernetes job, with special case mapping `job` to
`k8s_job`, to not conflict with Prometheus' job label.
Fix panic when unknown type specified as a `--from` or `--to` flag.
Fix `job` label from `linkerd-proxy` overwriting Prometheus `job` label at
collection time. This caused all metrics collected by proxy sidecars in
Kubernetes jobs to be collected into an incorrect Prometheus job, rather than
the expected `linkerd-proxy` Prometheus job.
Fix `unsupported resource type` tap error message incorrectly printing the
target resource rather than the destination.
Set `--controller-log-level debug` in `install_test.go` for easier debugging.
Expose `slow-cooker`'s metrics via a k8s service in the tap integration test, to
validate proxy requests with a job as destination.
Fixes#1872
Part of #627
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Adjust proxy, Prometheus, and Grafana probes
High `readinessProbe.initialDelaySeconds` values delayed the controller's
readiness by up to 30s, preventing cli commands from succeeding shortly after
control plane deployment.
Decrease `readinessProbe.initialDelaySeconds` in the proxy, Prometheus, and
Grafana to the default 0s. Also change `linkerd check` controller pod ordering
to: controller, prometheus, web, grafana.
Detailed probe changes:
- proxy
- decrease `readinessProbe.initialDelaySeconds` from 10s to 0s
- prometheus
- decrease `readinessProbe.initialDelaySeconds` from 30s to 0s
- decrease `readinessProbe.timeoutSeconds` from 30s to 1s
- decrease `livenessProbe.timeoutSeconds` from 30s to 1s
- grafana
- decrease `readinessProbe.initialDelaySeconds` from 30s to 0s
- decrease `readinessProbe.timeoutSeconds` from 30s to 1s
- decrease `readinessProbe.failureThreshold` from 10 to 3
- increase `livenessProbe.initialDelaySeconds` from 0s to 30s
Fixes#1804
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Refactor util.BuildResource so it can deal with multiple resources
First step to address #1487: Allow stat summary to query for multiple
resources
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* Update the stat cli help text to explain the new multi resource querying ability
Propsal for #1487: Allow stat summary to query for multiple resources
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* Allow stat summary to query for multiple resources
Implement this ability by issuing parallel requests to requestStatsFromAPI()
Proposal for #1487
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* Update tests as part of multi-resource support in `linkerd stat` (#1487)
- Refactor stat_test.go to reuse the same logic in multiple tests, and
add cases and files for json output.
- Add a couple of cases to api_utils_test.go to test multiple resources
validation.
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* `linkerd stat` called with multiple resources should keep an ordering (#1487)
Add SortedRes holding the order of resources to be followed when
querying `linkerd stat` with multiple resources
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* Extra validations for `linkerd stat` with multiple resources (#1487)
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* `linkerd stat` resource grouping, ordering and name prefixing (#1487)
- Group together stats per resource type.
- When more than one resource, prepend name with type.
- Make sure tables always appear in the same order.
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* Allow `linkerd stat` to be called with multiple resources
A few final refactorings as per code review.
Fixes#1487
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
This commit removes duplicate logic that loads Kubernetes config and
replaces it with GetConfig from pkg/k8s. This also allows to load
config from default sources like $KUBECONFIG instead of explicitly
passing -kubeconfig option to controller components.
Signed-off-by: Igor Zibarev <zibarev.i@gmail.com>
We make several changes to the service profile spec to make service profiles more ergonomic and to make them more consistent with the destination profile API.
* Allow multiple fields to be simultaneously set on a RequestMatch or ResponseMatch condition. Doing so is equivalent to combining the fields with an "all" condition.
* Rename "responses" to "response_classes"
* Change "IsSuccess" to "is_failure"
Signed-off-by: Alex Leong <alex@buoyant.io>
Service profiles must be named in the form `"<service>.<namespace>"`. This is inconsistent with the fully normalized domain name that the proxy sends to the controller. It also does not permit creating service profiles for non-Kubernetes services.
We switch to requiring that service profiles must be named with the FQDN of their service. For Kubernetes services, this is `"<service>.<namespace>.svc.cluster.local"`.
This change alone is not sufficient for allowing service profile for non-Kubernetes services because the k8s resolver will ignore any DNS names which are not Kubernetes services. Further refactoring of the resolver will be required to allow looking up non-Kubernetes service profiles in Kuberenetes.
Signed-off-by: Alex Leong <alex@buoyant.io>
The existence of an invalid service profile causes `linkerd check` to fail. This means that it is not possible to open the Linkerd dashboard with the `linkerd dashboard` command. While service profile validation is useful, it should not lock users out.
Add the ability to designate health checks as warnings. A failed warning health check will display a warning output in `linkerd check` but will not affect the overall success of the command. Switch the service profile validation to be a warning.
Signed-off-by: Alex Leong <alex@buoyant.io>
Fix broken docker build by moving Service Profile conversion and validation into `/pkg`.
Fix broken integration test by adding service profile validation output to `check`'s expected output.
Testing done:
* `gotest -v ./...`
* `bin/docker-build`
* `bin/test-run (pwd)/bin/linkerd`
Signed-off-by: Alex Leong <alex@buoyant.io>
Add a check to `linkerd check` which validates all service profile resources. In particular it checks:
* does the service profile refer to an existent service
* is the service profile valid
Signed-off-by: Alex Leong <alex@buoyant.io>
Updates to the Kubernetes utility code in `/controller/k8s` to support interacting with ServiceProfiles.
This makes use of the code generated client added in #1752
Signed-off-by: Alex Leong <alex@buoyant.io>
* Add --single-namespace install flag for restricted permissions
* Better formatting in install template
* Mark --single-namespace and --proxy-auto-inject as experimental
* Fix wording of --single-namespace check flag
* Small healthcheck refactor
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Support auto sidecar-injection
1. Add proxy-injector deployment spec to cli/install/template.go
2. Inject the Linkerd CA bundle into the MutatingWebhookConfiguration
during the webhook's start-up process.
3. Add a new handler to the CA controller to create a new secret for the
webhook when a new MutatingWebhookConfiguration is created.
4. Declare a config map to store the proxy and proxy-init container
specs used during the auto-inject process.
5. Ignore namespace and pods that are labeled with
linkerd.io/auto-inject: disabled or linkerd.io/auto-inject: completed
6. Add new flag to `linkerd install` to enable/disable proxy
auto-injection
Proposed implementation for #561.
* Resolve missing packages errors
* Move the auto-inject label to the pod level
* PR review items
* Move proxy-injector to its own deployment
* Ignore pods that already have proxy injected
This ensures the webhook doesn't error out due to proxy that are injected using the command
* PR review items on creating/updating the MWC on-start
* Replace API calls to ConfigMap with file reads
* Fixed post-rebase broken tests
* Don't mutate the auto-inject label
Since we started using healhcheck.HasExistingSidecars() to ensure pods with
existing proxies aren't mutated, we don't need to use the auto-inject label as
an indicator.
This resolves a bug which happens with the kubectl run command where the deployment
is also assigned the auto-inject label. The mutation causes the pod auto-inject
label to not match the deployment label, causing kubectl run to fail.
* Tidy up unit tests
* Include proxy resource requests in sidecar config map
* Fixes to broken YAML in CLI install config
The ignore inbound and outbound ports are changed to string type to
avoid broken YAML caused by the string conversion in the uint slice.
Also, parameterized the proxy bind timeout option in template.go.
Renamed the sidecar config map to
'linkerd-proxy-injector-webhook-config'.
Signed-off-by: ihcsim <ihcsim@gmail.com>
* Added --context flag to specify the context to use to talk to the Kubernetes apiserver
* Fix tests that are failing
* Updated context flag description
Signed-off-by: Darko Radisic <ffd2subroutine@users.noreply.github.com>
* Use ListPods always for data plane HC
* Missing changes in grpc_server.go
* Address review comments
* Read proxy version from spec
Signed-off-by: Alena Varkockova <varkockova.a@gmail.com>
* Update version checks to support release channels
* Update based on review feedback
* Fix sidebar tests
* Update CI config for edge and stable tags
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Add checks to `linkerd check --pre` to verify that the user has permission to create:
* namespaces
* serviceaccounts
* clusterroles
* clusterrolebindings
* services
* deployments
* configmaps
Signed-off-by: Alex Leong <alex@buoyant.io>
The `linkerd check` parameter hits
https://versioncheck.linkerd.io/version.json to check for the latest
Linkerd version. This loses information, as that endpoint is intended to
record current version, uuid, and source.
Modify `linkerd check` to set `version`, `uuid`, and `source`
parameters when performing a version check.
Part of #1604.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The `linkerd check` command was not validating whether data plane
proxies were successfully reporting metrics to Prometheus.
Introduce a new check that validates data plane proxies are found in
Prometheus. This is made possible via the existing `ListPods` endpoint
in the public API, which includes an `Added` field, indicating a pod's
metrics were found in Prometheus.
Fixes#1517
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Alejandro Pedraza
Andrew Seigner
Tarun Pothulapati
Yan
Oliver Gould
Kevin Lingerfelt
Kevin Leimkuhler
Alex Leong
Ivan Sim
Dennis Adjei-Baah
Risha Mars
Thomas Rampelberg
zak
Alena Varkockova
Radu M
Igor Zibarev
Darko Radisic