When running Linkerd check with a control plane namespace that may contain an additional pod with a replication controller ID for pod names instead of a replicaSet ID, the check command panics because of an "index out of bounds" error.
This PR adds a check to make sure that, when parsing pod names during the `checkControllerRunning` healthcheck, we only check for linkerd control plane pods and that the pod name results in four or more substrings when split on '-'. This prevents the check from panicking when encountering a replication controller ID pod name.
Fixes#2084
Signed-off-by: Dennis Adjei-Baah <dennis@buoyant.io>
When a failing check is being retried, we show the current err to the user. This
can sometimes be unnecessarily alarming, as in the case of the control plane
starting up.
If a failing check is in the process of being retried, wait to show the final
error message until the retries have completed.
Previously, we were doing the creation checks for both Roles/RoleBindings and
ClusterRoles/ClusterRoleBindings for all namespaces, but in --single-namespace
mode, we only need to check that these can be created in the control plane
namespace.
Version checks were not validating that the cli version matched the
control plane or data plane versions.
Add checks via the `linkerd check` command to validate the cli is
running the same version as the control and data plane.
Also add types around `channel-version` string parsing and matching. A
consequence being that during development `version.Version` changes from
`undefined` to `dev-undefined`.
Fixes#2076
Depends on linkerd/website#101
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Introduce resource selector and deprecate namespace field for ListPods
* Changes from code review
* Properly deprecate the field
* Do not check for nil
* Fix the mockProm usage
* Protoc changes revert
* Changed from code review
Signed-off-by: Alena Varkockova <varkockova.a@gmail.com>
The outputs of the `check` and `inject` commands did not vary much
between successful and failed executions, and were a bit verbose and
challenging to parse.
Reorganize output of `check` and `inject` commands, to provide more
output when errors occur, and less output when successful.
Specific changes:
`linkerd check`
- visually group checks by category
- introduce `hintURL`'s, to provide doc links when checks fail
- add spinners when retrying, remove additional retry lines
- colored unicode characters to indicate success/warning/failure
`linkerd inject`
- modify default output to mirror `kubectl apply`
- only output non-successful inject reports
- support `--verbose` flag to output all inject reports
Fixes#1471, #1653, #1656, #1739
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The linkerd check command organized the various checks via loosely
coupled category IDs, category names, and checkers themselves, all with
ordering defined by consumers of this code.
This change removes category IDs in favor of category names, groups all
checkers by category, and enforces ordering at the HealthChecker
level.
Part of #1471, depends on #2078.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The set of health checks to be executed were dependent on a combination
of check enums and boolean options.
This change modifies the health checks to be governed strictly by a set
of enums.
Next steps:
- tightly couple category IDs to names
- tightly couple checks to their parent categories
- programmatic control over check ordering
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Commit 1: Enable lint check for comments
Part of #217. Follow up from #1982 and #2018.
A subsequent commit will fix the ci failure.
Commit 2: Address all comment-related linter errors.
This change addresses all comment-related linter errors by doing the
following:
- Add comments to exported symbols
- Make some exported symbols private
- Recommend via TODOs that some exported symbols should should move or
be removed
This PR does not:
- Modify, move, or remove any code
- Modify existing comments
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Adjust proxy, Prometheus, and Grafana probes
High `readinessProbe.initialDelaySeconds` values delayed the controller's
readiness by up to 30s, preventing cli commands from succeeding shortly after
control plane deployment.
Decrease `readinessProbe.initialDelaySeconds` in the proxy, Prometheus, and
Grafana to the default 0s. Also change `linkerd check` controller pod ordering
to: controller, prometheus, web, grafana.
Detailed probe changes:
- proxy
- decrease `readinessProbe.initialDelaySeconds` from 10s to 0s
- prometheus
- decrease `readinessProbe.initialDelaySeconds` from 30s to 0s
- decrease `readinessProbe.timeoutSeconds` from 30s to 1s
- decrease `livenessProbe.timeoutSeconds` from 30s to 1s
- grafana
- decrease `readinessProbe.initialDelaySeconds` from 30s to 0s
- decrease `readinessProbe.timeoutSeconds` from 30s to 1s
- decrease `readinessProbe.failureThreshold` from 10 to 3
- increase `livenessProbe.initialDelaySeconds` from 0s to 30s
Fixes#1804
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
We make several changes to the service profile spec to make service profiles more ergonomic and to make them more consistent with the destination profile API.
* Allow multiple fields to be simultaneously set on a RequestMatch or ResponseMatch condition. Doing so is equivalent to combining the fields with an "all" condition.
* Rename "responses" to "response_classes"
* Change "IsSuccess" to "is_failure"
Signed-off-by: Alex Leong <alex@buoyant.io>
Service profiles must be named in the form `"<service>.<namespace>"`. This is inconsistent with the fully normalized domain name that the proxy sends to the controller. It also does not permit creating service profiles for non-Kubernetes services.
We switch to requiring that service profiles must be named with the FQDN of their service. For Kubernetes services, this is `"<service>.<namespace>.svc.cluster.local"`.
This change alone is not sufficient for allowing service profile for non-Kubernetes services because the k8s resolver will ignore any DNS names which are not Kubernetes services. Further refactoring of the resolver will be required to allow looking up non-Kubernetes service profiles in Kuberenetes.
Signed-off-by: Alex Leong <alex@buoyant.io>
The existence of an invalid service profile causes `linkerd check` to fail. This means that it is not possible to open the Linkerd dashboard with the `linkerd dashboard` command. While service profile validation is useful, it should not lock users out.
Add the ability to designate health checks as warnings. A failed warning health check will display a warning output in `linkerd check` but will not affect the overall success of the command. Switch the service profile validation to be a warning.
Signed-off-by: Alex Leong <alex@buoyant.io>
Fix broken docker build by moving Service Profile conversion and validation into `/pkg`.
Fix broken integration test by adding service profile validation output to `check`'s expected output.
Testing done:
* `gotest -v ./...`
* `bin/docker-build`
* `bin/test-run (pwd)/bin/linkerd`
Signed-off-by: Alex Leong <alex@buoyant.io>
Add a check to `linkerd check` which validates all service profile resources. In particular it checks:
* does the service profile refer to an existent service
* is the service profile valid
Signed-off-by: Alex Leong <alex@buoyant.io>
* Add --single-namespace install flag for restricted permissions
* Better formatting in install template
* Mark --single-namespace and --proxy-auto-inject as experimental
* Fix wording of --single-namespace check flag
* Small healthcheck refactor
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Added --context flag to specify the context to use to talk to the Kubernetes apiserver
* Fix tests that are failing
* Updated context flag description
Signed-off-by: Darko Radisic <ffd2subroutine@users.noreply.github.com>
* Use ListPods always for data plane HC
* Missing changes in grpc_server.go
* Address review comments
* Read proxy version from spec
Signed-off-by: Alena Varkockova <varkockova.a@gmail.com>
Add checks to `linkerd check --pre` to verify that the user has permission to create:
* namespaces
* serviceaccounts
* clusterroles
* clusterrolebindings
* services
* deployments
* configmaps
Signed-off-by: Alex Leong <alex@buoyant.io>
The `linkerd check` parameter hits
https://versioncheck.linkerd.io/version.json to check for the latest
Linkerd version. This loses information, as that endpoint is intended to
record current version, uuid, and source.
Modify `linkerd check` to set `version`, `uuid`, and `source`
parameters when performing a version check.
Part of #1604.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The `linkerd check` command was not validating whether data plane
proxies were successfully reporting metrics to Prometheus.
Introduce a new check that validates data plane proxies are found in
Prometheus. This is made possible via the existing `ListPods` endpoint
in the public API, which includes an `Added` field, indicating a pod's
metrics were found in Prometheus.
Fixes#1517
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
This PR begins to migrate Conduit to Linkerd2:
* The proxy has been completely removed from this repo, and is now located at
github.com/linkerd/linkerd2-proxy.
* A `Dockerfile-proxy` has been added to fetch the most-recently published proxy
binary from build.l5d.io.
* Proxy-specific protobuf bindings have been moved to
github.com/linkerd/linkerd2-proxy-api.
* All docker images now use the gcr.io/linkerd-io registry.
* `inject` now uses `LINKERD2_PROXY_` environment variables
* Go paths have been updated to reflect the new (future) repo location.
* Move healthcheck proto to separate file, use throughout
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Remove Check message from healthcheck.proto
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Standardize healthcheck protobuf import name
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Abstract Conduit API client from protobuf interface to add new features
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Consolidate mock api clients
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Add simple implementation of healthcheck for conduit api
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Change NextSteps to FriendlyMessageToUser
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Add grpc check for status on the client
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Add simple server-side check for Conduit API
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Fix feedback from PR
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Rename constructor functions from MakeXyz to NewXyz
As it is more commonly used in the codebase
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Make Conduit client depend on KubernetesAPI
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Move Conduit client and k8s logic to standard go package dir for internal libs
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Move dependencies to /pkg
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Make conduit client more testable
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Remove unused config object
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Add more test cases for marhsalling
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Move client back to controller
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Sort imports
Signed-off-by: Phil Calcado <phil@buoyant.io>
Dennis Adjei-Baah
Risha Mars
Andrew Seigner
Alena Varkockova
Alejandro Pedraza
Radu M
Kevin Lingerfelt
Alex Leong
Darko Radisic
Oliver Gould
Phil Calçado