**Subject**
Fixes bug where override of Docker registry was not being applied to debug containers (#3851)
**Problem**
Overrides for Docker registry are not being applied to debug containers and provide no means to correct the image.
**Solution**
This update expands the `data.proxy` configuration section within the Linkerd `ConfigMap` to maintain the overridden image name for debug containers at _install_-time similar to handling of the `proxy` and `proxyInit` images.
This change also enables the further override option of the registry for debug containers at _inject_-time given utilization of the `--registry` CLI option.
**Validation**
Several new unit tests have been created to confirm functionality. In addition, the following workflows were run through:
### Standard Workflow with Custom Registry
This workflow installs Linkerd control plane based upon a custom registry, then injecting the debug sidecar into a service.
* Start with a k8s instance having no Linkerd installation
* Build all images locally using `bin/docker-build`
* Create custom tags (using same version) for generated images, e.g. `docker tag gcr.io/linkerd-io/debug:git-a4ebecb6 javaducky.com/linkerd-io/debug:git-a4ebecb6`
* Install Linkerd with registry override `bin/linkerd install --registry=javaducky.com/linkerd-io | kubectl apply -f -`
* Once Linkerd has been fully initialized, you should be able to confirm that the `linkerd-config` ConfigMap now contains the debug image name, pull policy, and version within the `data.proxy` section
* Request injection of the debug image into an available container. I used the Emojivoto voting service as described in https://linkerd.io/2/tasks/using-the-debug-container/ as `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar - | kubectl apply -f -`
* Once the deployment creates a new pod for the service, inspection should show that the container now includes the "linkerd-debug" container name based on the applicable override image seen previously within the ConfigMap
* Debugging can also be verified by viewing debug container logs as `kubectl -n emojivoto logs deploy/voting linkerd-debug -f`
* Modifying the `config.linkerd.io/enable-debug-sidecar` annotation, setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Overriding the Custom Registry Override at Injection
This builds upon the “Standard Workflow with Custom Registry” by overriding the Docker registry utilized for the debug container at the time of injection.
* “Clean” the Emojivoto voting service by removing any Linkerd annotations from the deployment
* Request injection similar to before, except provide the `--registry` option as in `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar --registry=gcr.io/linkerd-io - | kubectl apply -f -`
* Inspection of the deployment config should now show the override annotation for `config.linkerd.io/debug-image` having the debug container from the new registry. Viewing the running pod should show that the `linkerd-debug` container was injected and running the correct image. Of note, the proxy and proxy-init images are still running the “original” override images.
* As before, modifying the `config.linkerd.io/enable-debug-sidecar` annotation setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Standard Workflow with Default Registry
This workflow is the typical workflow which utilizes the standard Linkerd image registry.
* Uninstall the Linkerd control plane using `bin/linkerd install --ignore-cluster | kubectl delete -f -` as described at https://linkerd.io/2/tasks/uninstall/
* Clean the Emojivoto environment using `curl -sL https://run.linkerd.io/emojivoto.yml | kubectl delete -f -` then reinstall using `curl -sL https://run.linkerd.io/emojivoto.yml | kubectl apply -f -`
* Perform standard Linkerd installation as `bin/linkerd install | kubectl apply -f -`
* Once Linkerd has been fully initialized, you should be able to confirm that the `linkerd-config` ConfigMap references the default debug image of `gcr.io/linkerd-io/debug` within the `data.proxy` section
* Request injection of the debug image into an available container as `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar - | kubectl apply -f -`
* Debugging can also be verified by viewing debug container logs as `kubectl -n emojivoto logs deploy/voting linkerd-debug -f`
* Modifying the `config.linkerd.io/enable-debug-sidecar` annotation, setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Overriding the Default Registry at Injection
This workflow builds upon the “Standard Workflow with Default Registry” by overriding the Docker registry utilized for the debug container at the time of injection.
* “Clean” the Emojivoto voting service by removing any Linkerd annotations from the deployment
* Request injection similar to before, except provide the `--registry` option as in `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar --registry=javaducky.com/linkerd-io - | kubectl apply -f -`
* Inspection of the deployment config should now show the override annotation for `config.linkerd.io/debug-image` having the debug container from the new registry. Viewing the running pod should show that the `linkerd-debug` container was injected and running the correct image. Of note, the proxy and proxy-init images are still running the “original” override images.
* As before, modifying the `config.linkerd.io/enable-debug-sidecar` annotation setting to “false”, should show that the pod will be recreated no longer running the debug container.
Fixes issue #3851
Signed-off-by: Paul Balogh javaducky@gmail.com
Adds a check to ensure kube-system namespace has `config.linkerd.io/admission-webhooks:disabled`
FIxes#3721
Signed-off-by: Zahari Dichev <zaharidichev@gmail.com>
* Inject preStop hook into the proxy sidecar container to stop it last
This commit adds support for a Graceful Shutdown technique that is used
by some Kubernetes administrators while the more perspective
configuration is being discussed in
https://github.com/kubernetes/kubernetes/issues/65502
The problem is that RollingUpdate strategy does not guarantee that all
traffic will be sent to a new pod _before_ the previous pod is removed.
Kubernetes inside is an event-driven system and when a pod is being
terminating, several processes can receive the event simultaneously.
And if an Ingress Controller gets the event too late or processes it
slower than Kubernetes removes the pod from its Service, users requests
will continue flowing into the black whole.
According [to the documentation](https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods)
> 1. If one of the Pod’s containers has defined a `preStop` hook,
> it is invoked inside of the container. If the `preStop` hook is still
> running after the grace period expires, step 2 is then invoked with
> a small (2 second) extended grace period.
>
> 2. The container is sent the `TERM` signal. Note that not all
> containers in the Pod will receive the `TERM` signal at the same time
> and may each require a preStop hook if the order in which
> they shut down matters.
This commit adds support for the `preStop` hook that can be configured
in three forms:
1. As command line argument `--wait-before-exit-seconds` for
`linkerd inject` command.
2. As `linkerd2` Helm chart value `Proxy.WaitBeforeExitSeconds`.
2. As `config.alpha.linkerd.io/wait-before-exit-seconds` annotation.
If configured, it will add the following preHook to the proxy container
definition:
```yaml
lifecycle:
preStop:
exec:
command:
- /bin/bash
- -c
- sleep {{.Values.Proxy.WaitBeforeExitSeconds}}
```
To achieve max benefit from the option, the main container should have
its own `preStop` hook with the `sleep` command inside which has
a smaller period than is set for the proxy sidecar. And none of them
must be bigger than `terminationGracePeriodSeconds` configured for the
entire pod.
An example of a rendered Kubernetes resource where
`.Values.Proxy.WaitBeforeExitSeconds` is equal to `40`:
```yaml
# application container
lifecycle:
preStop:
exec:
command:
- /bin/bash
- -c
- sleep 20
# linkerd-proxy container
lifecycle:
preStop:
exec:
command:
- /bin/bash
- -c
- sleep 40
terminationGracePeriodSeconds: 160 # for entire pod
```
Fixes#3747
Signed-off-by: Eugene Glotov <kivagant@gmail.com>
This PR adds support for CronJobs and ReplicaSets to `linkerd inject`, the web
dashboard and CLI. It adds a new Grafana dashboard for each kind of resource.
Closes#3614Closes#3630Closes#3584Closes#3585
Signed-off-by: Sergio Castaño Arteaga tegioz@icloud.com
Signed-off-by: Cintia Sanchez Garcia cynthiasg@icloud.com
* rework annotations doc generation from godoc parsing to map[string]string and get rid of unused yaml tags
* move annotations doc function from pkg/k8s to cli/cmd
Signed-off-by: StupidScience <tonysignal@gmail.com>
* Add support for --identity-issuer-mode flag to install cmd
* Change flag to be a bool
* Read correct data form identity when external issuer is used
* Add ability for identity service to dynamically reload certs
* Fix failing tests
* Minor refactor
* Load trust anchors from identity issuer secret
* Make identity service actually watch for issuer certs updates
* Add some testing around cmd line identity options validation
* Add tests ensuring that identity service loads issuer
* Take into account external-issuer flag during upgrade + tests
* Fix failing upgrade test
* Address initial review feedback
* Address further review feedback on cli and helm
* Do not persist --identity-external-issuer
* Some improvements to identitiy service
* Bring back persistane of external issuer flag
* Address more feedback
* Update dockerfiles shas
* Publishing k8s events on issuer certs rotation
* Ensure --ignore-cluster+external issuer is not supported
* Update go-deps shas
* Transition to identity issuer scheme based configuration
* Use k8s consts for secret file names
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
* Add the tracing environment variables to the proxy spec
* Add tracing event
* Remove unnecessary CLI change
* Update log message
* Handle single segment service name
* Use default service account if not provided
The injector doesn't read the defaults from the values.yaml
* Remove references to conf.workload.ownerRef in log messages
This nested field isn't always set.
Signed-off-by: Ivan Sim <ivan@buoyant.io>
The Tap Service enabled tapping of any meshed pod, regardless of user
privilege.
This change introduces a new Tap APIService. Kubernetes provides
authentication and authorization of Tap requests, and then forwards
requests to a new Tap APIServer, which implements a Kubernetes
aggregated APIServer. The Tap APIServer authenticates the client TLS
from Kubernetes, and authorizes the user via a SubjectAccessReview.
This change also modifies the `linkerd tap` command to make requests
against the new APIService.
The Tap APIService implements these Kubernetes-style endpoints:
POST /apis/tap.linkerd.io/v1alpha1/watch/namespaces/:ns/tap
POST /apis/tap.linkerd.io/v1alpha1/watch/namespaces/:ns/:res/:name/tap
GET /apis
GET /apis/tap.linkerd.io
GET /apis/tap.linkerd.io/v1alpha1
GET /healthz
GET /healthz/log
GET /healthz/ping
GET /metrics
GET /openapi/v2
GET /version
Users authorize to the new `tap.linkerd.io/v1alpha1` via RBAC. Only the
`watch` verb is supported. Access is also available via subresources
such as `deployments/tap` and `pods/tap`.
This change introduces the following resources into the default Linkerd
install:
- Global
- APIService/v1alpha1.tap.linkerd.io
- ClusterRoleBinding/linkerd-linkerd-tap-auth-delegator
- `linkerd` namespace:
- Secret/linkerd-tap-tls
- `kube-system` namespace:
- RoleBinding/linkerd-linkerd-tap-auth-reader
Tasks not covered by this PR:
- `linkerd top`
- `linkerd dashboard`
- `linkerd profile --tap`
- removal of the unauthenticated tap controller
Fixes#2725, #3162, #3172
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Linkerd's CLI flags all match 1:1 with their `config.linkerd.io/*`
annotation counterparts, except `--enable-debug-sidecar`, which
corresponded to `config.linkerd.io/debug`. Additionally, the Linkerd
docs assume this 1:1 mapping.
Rename the `config.linkerd.io/debug` annotation to
`config.linkerd.io/enable-debug-sidecar`.
Relates to https://github.com/linkerd/website/issues/381
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* If HA, set the webhooks failure policy to 'Fail'
I'm adding to the linkerd namespace a new label
`linkerd.io/is-control-plane: true` that is used in the webhook configs'
selector to skip the proxy injector for this namespace. This avoids
running into the timing issues described in #2852.
Fixes#2852
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Split proxy-init into separate repo
Fixes#2563
The new repo is https://github.com/linkerd/linkerd2-proxy-init, and I
tagged the latest there `v1.0.0`.
Here, I've removed the `/proxy-init` dir and pinned the injected
proxy-init version to `v1.0.0` in the injector code and tests.
`/cni-plugin` depends on proxy-init, so I updated the import paths
there, and could verify CNI is still working (there is some flakiness
but unrelated to this PR).
For consistency, I added a `--init-image-version` flag to `linkerd
inject` along with its corresponding override config annotation.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
This new annotation is used by the proxy injector to determine if the
debug container needs to be injected.
When using 'linkerd install', the 'pkg/inject' library will only inject
annotations into the workload YAML. Even though 'conf.debugSidecar'
is set in the CLI, the 'injectPodSpec()' function is never invoked on
the proxy injector side. Once the workload YAML got picked up by the
proxy injector, 'conf.debugSidecar' is already nil, since it's a different,
new 'conf' object. The new annotation ensures that the proxy injector
injects the debug container.
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Update helm charts to include webhooks config and TLS secret
* Update the webhooks to read the secret cert and key
* Update webhooks to not recreate config on restart
* Ensure upgrade preserve existing secrets
* Revert the change to rename the webhook configs
The renaming change breaks upgrade, where the new webhook configs conflict with
the existing ones. The older resources aren't deleted during upgrade because
they are dynamically created.
* Make the secret volume read-only
* Remove unnecessary exported getter functions
* Remove obsolete mwc and vwc templates
Signed-off-by: Ivan Sim <ivan@buoyant.io>
Support for resources opting out of tap
Implements the `linkerd inject --disable-tap` flag (although hidden pending #2811) and the config override annotation `config.linkerd.io/disable-tap`.
Fixes#2778
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Add config.linkerd.io/disable-identity annotation
First part of #2540
We'll tackle support for `--disable-identity` in `linkerd install` in a
separate commit.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Add validation webhook for service profiles
Fixes#2075
Todo in a follow-up PRs: remove the SP check from the CLI check.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Define proxy version override annotation
* Don't override global linkerd version during inject
This ensures consistent usages of the config.linkerd.io/linkerd-version and
linkerd.io/proxy-version annotations. The former will only be used to track
overridden version, while the latter shows the cluster's current default
version.
* Rename proxy version config override annotation
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Disable external profiles by default
* Rename the --disable-external-profiles flag to --enable-external-profiles
Signed-off-by: Ivan Sim <ivan@buoyant.io>
The `install` command errors when the deploy target contains an existing
Linkerd deployment. The `upgrade` command is introduced to reinstall or
reconfigure the Linkerd control plane.
Upgrade works as follows:
1. The controller config is fetched from the Kubernetes API. The Public
API is not used, because we need to be able to reinstall the control
plane when the Public API is not available; and we are not concerned
about RBAC restrictions preventing the installer from reading the
config (as we are for inject).
2. The install configuration is read, particularly the flags used during
the last install/upgrade. If these flags were not set again during the
upgrade, the previous values are used as if they were passed this time.
The configuration is updated from the combination of these values,
including the install configuration itself.
Note that some flags, including the linkerd-version, are omitted
since they are stored elsewhere in the configurations and don't make
sense to track as overrides..
3. The issuer secrets are read from the Kubernetes API so that they can
be re-used. There is currently no way to reconfigure issuer
certificates. We will need to create _another_ workflow for
updating these credentials.
4. The install rendering is invoked with values and config fetched from
the cluster, synthesized with the new configuration.
Have the Webhook react to pod creation/update only
This was already working almost out-of-the-box, just had to:
- Change the webhook config so it watches pods instead of deployments
- Grant some extra ClusterRole permissions
- Add the piece that figures what's the OwnerReference and add the label
for it
- Manually inject service account mount paths
- Readd volumes tests
Fixes#2342 and #1751
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
This change reintroduces identity hinting to the destination service.
The Get endpoint includes identities for pods that are injected with an
identity-mode of "default" and have the same linkerd control plane.
A `serviceaccount` label is now also added to destination response
metadata so that it's accessible in prometheus and tap.
This change adds a new `linkerd2-proxy-identity` binary to the `proxy`
container image as well as a `linkerd2-proxy-run` entrypoint script.
The inject process now sets environment variables on pods to support
identity, including identity names for the destination and identity
services.
As the proxy starts, the identity helper creates a key and CSR in a
tmpfs. As the proxy starts, it reads these files, as well as a
serviceaccount token, and provisions a certificate from controller.
The proxy's /ready endpoint will not succeed until a certificate has
been provisioned.
The proxy will not participate in identity with services other than the
controllers until the Destination controller is modified to provide
identities via discovery.
The introduction of identity in 0626fa37 created new state in the
control plane's configuration that must be considered when re-installing
the control plane or when injecting pods.
This change alters `install` to fail if it would seem to conflict with
an existing installation. This behavior may be disabled with the
`--ignore-cluster` flag.
Furthermore, `inject` now _requires_ that it can fetch a configuration
from the control plane in order to operate. Otherwise the
`--ignore-cluster` and `--disable-identity` flags must be specified.
This change does not actually instrument pods to use identity yet---it
lays the framework for proxy identity without changing the test fixture
output (besides a change to how identity HA is configured).
Fixes#2531
https://github.com/linkerd/linkerd2/pull/2521 introduces an "Identity"
controller, but there is no way to include it in linkerd installation.
This change alters the `install` flow as follows:
- An Identity service is _always_ installed;
- Issuer credentials may be specified via the CLI;
- If no Issuer credentials are provided, they are generated each time `install` is called.
- Proxies are NOT configured to use the identity service.
- It's possible to override the credential generation logic---especially
for tests---via install options that can be configured via the CLI.
The new proxy has changed its configuration as follows:
- `LISTENER` urls are now `LISTEN_ADDR` addresses;
- `CONTROL_URL` is now `DESTINATION_SVC_ADDR`;
- `*_NAMESPACE` vars are no longer needed;
- The `PROXY_ID` is now the `DESTINATION_CONTEXT`;
- The "metrics" port is now the "admin" port, since it serves more than
just metrics;
- A readiness probe now checks a dedicated /ready endpoint eagerly.
Identity injection is **NOT** configured by this branch.
The proxy's TLS implementation has changed to use a new _Identity_ controller.
In preparation for this, the `--tls=optional` CLI flag has been removed
from install and inject; and the `ca` controller has been deleted. Metrics
and UI treatments for TLS have **not** been removed, as they will continue to
be valuable for the new Identity system.
With the removal of the old identity scheme, the Destination service's proxy
ID field is now set with an opaque string (e.g. `ns:emojivoto`) to enable
locality awareness.
* Defined the config annotations as new constants in labels.go
* Introduced the getOverride() functions to override configs
* Introduced new accessors to abstract with type casting
Signed-off-by: Ivan Sim <ivan@buoyant.io>
It's sometimes helpful to spotcheck proxy metrics from a specific pod,
but doing so with kubectl requires a few steps.
Introduce a new `linkerd metrics` command. When given a pod name and
namespace, returns a dump of the proxy's /metrics endpoint.
Also modify the k8s.portforward module to accept initialized k8s config
and client objects, to enable testing.
Fixes#2350.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Fixes#2377
In inject's ResourceConfig, renamed objMeta to podMeta since
it really points to the pod template metadata. And created a new field
workloadMeta that really points to the main workload (e.g. Deployment) metadata.
Refactored uninject to clean up the labels at both podMeta and
workloadMeta. Also it will remove all the labels and annotations that
start with "linkerd.io" except for the "linkerd.io/inject" annotation.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
- Created the pkg/inject package to hold the new injection shared lib.
- Extracted from `/cli/cmd/inject.go` and `/cli/cmd/inject_util.go`
the core methods doing the workload parsing and injection, and moved them into
`/pkg/inject/inject.go`. The CLI files should now deal only with
strictly CLI concerns, and applying the json patch returned by the new
lib.
- Proceeded analogously with `/cli/cmd/uninject.go` and
`/pkg/inject/uninject.go`.
- The `InjectReport` struct and helping methods were moved into
`/pkg/inject/report.go`
- Refactored webhook to use the new injection lib
- Removed linkerd-proxy-injector-sidecar-config ConfigMap
- Added the ability to add pod labels and annotations without having to
specify the already existing ones
Fixes#1748, #2289
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
As described in #2217, the controller returns TLS identities for results even
when the destination pod may not be able to participate in identity
requester: specifically, the other pod may not have the same controller
namespace or it may not be injected with identity.
This change introduces a new annotation, linkerd.io/identity-mode that is set
when injecting pods (via both CLI and webhook). This annotation is always
added.
The destination service now only returns TLS identities when this annotation
is set to optional on a pod and the destination pod uses the same controller.
These semantics are expected to change before the 2.3 release.
Fixes#2217
Since 37ae423, deployments have been prefixed with linkerd-; however
the inject logic was not changed to take this into consideration when
constructing the controller's identity.
This means that the proxy's client to the control plane has been unable to
establish TLS'd communcation to the proxy-api. Previously, the proxy would
silently fall back to plaintext, but in master this behavior recently changed to
be stricter, so this bug will prevent the proxy from connecting to proxy-api
in any way.
* Add pod spec annotation to disable injection in CLI and auto-injector
* Remove support for linkerd.io/auto-inject label entirely
* Update based on review feedback
* Fix issue with finding the namespace of deployments applied to the default ns
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Use `ca.NewCA()` for generating certs and keys for the proxy injector
- Remove from CA controller everything that dealt with the
webhook/proxy-injector
- Remove no longer needed proxy-injector volumes for 'trust-anchors' and
'webhook-secrets'
- Remove from the proxy-injector the retrieval of the trust anchor and
secrets
- tls flag during install is no longer needed for auto-inject to work
Fixes#2095 and fixes#2166
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Add `linkerd uninject` command
uninject.go iterates through the resources annotations, labels,
initContainers and Containers, removing what we know was injected by
linkerd.
The biggest part of this commit is the refactoring of inject.go, to make
it more generic and reusable by uninject.
The idea is that in a following PR this functionality will get reused by
`linkerd inject` to uninject as as preliminary step to injection, as a
solution to #1970.
This was tested successfully on emojivoto with:
```
1) inject:
kubectl get -n emojivoto deployment -o yaml | bin/linkerd inject - |
kubectl apply -f -
2) uninject:
kubectl get -n emojivoto deployment -o yaml | bin/linkerd uninject - |
kubectl apply -f -
```
Also created unit tests for uninject.go. The fixture files from the inject
tests could be reused. But as now the input files act as outputs, they
represent existing resources and required these changes (that didn't
affect inject):
- Rearranged fields in alphabetical order.
- Added fields that are only relevant for existing resources (e.g.
creationTimestamp and status.replicas in StatefulSets)
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Commit 1: Enable lint check for comments
Part of #217. Follow up from #1982 and #2018.
A subsequent commit will fix the ci failure.
Commit 2: Address all comment-related linter errors.
This change addresses all comment-related linter errors by doing the
following:
- Add comments to exported symbols
- Make some exported symbols private
- Recommend via TODOs that some exported symbols should should move or
be removed
This PR does not:
- Modify, move, or remove any code
- Modify existing comments
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Filtering by Kubernetes job was not supported. Also filtering by any unknown
type caused a panic.
Add filtering support by Kubernetes job, with special case mapping `job` to
`k8s_job`, to not conflict with Prometheus' job label.
Fix panic when unknown type specified as a `--from` or `--to` flag.
Fix `job` label from `linkerd-proxy` overwriting Prometheus `job` label at
collection time. This caused all metrics collected by proxy sidecars in
Kubernetes jobs to be collected into an incorrect Prometheus job, rather than
the expected `linkerd-proxy` Prometheus job.
Fix `unsupported resource type` tap error message incorrectly printing the
target resource rather than the destination.
Set `--controller-log-level debug` in `install_test.go` for easier debugging.
Expose `slow-cooker`'s metrics via a k8s service in the tap integration test, to
validate proxy requests with a job as destination.
Fixes#1872
Part of #627
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Support auto sidecar-injection
1. Add proxy-injector deployment spec to cli/install/template.go
2. Inject the Linkerd CA bundle into the MutatingWebhookConfiguration
during the webhook's start-up process.
3. Add a new handler to the CA controller to create a new secret for the
webhook when a new MutatingWebhookConfiguration is created.
4. Declare a config map to store the proxy and proxy-init container
specs used during the auto-inject process.
5. Ignore namespace and pods that are labeled with
linkerd.io/auto-inject: disabled or linkerd.io/auto-inject: completed
6. Add new flag to `linkerd install` to enable/disable proxy
auto-injection
Proposed implementation for #561.
* Resolve missing packages errors
* Move the auto-inject label to the pod level
* PR review items
* Move proxy-injector to its own deployment
* Ignore pods that already have proxy injected
This ensures the webhook doesn't error out due to proxy that are injected using the command
* PR review items on creating/updating the MWC on-start
* Replace API calls to ConfigMap with file reads
* Fixed post-rebase broken tests
* Don't mutate the auto-inject label
Since we started using healhcheck.HasExistingSidecars() to ensure pods with
existing proxies aren't mutated, we don't need to use the auto-inject label as
an indicator.
This resolves a bug which happens with the kubectl run command where the deployment
is also assigned the auto-inject label. The mutation causes the pod auto-inject
label to not match the deployment label, causing kubectl run to fail.
* Tidy up unit tests
* Include proxy resource requests in sidecar config map
* Fixes to broken YAML in CLI install config
The ignore inbound and outbound ports are changed to string type to
avoid broken YAML caused by the string conversion in the uint slice.
Also, parameterized the proxy bind timeout option in template.go.
Renamed the sidecar config map to
'linkerd-proxy-injector-webhook-config'.
Signed-off-by: ihcsim <ihcsim@gmail.com>
This PR begins to migrate Conduit to Linkerd2:
* The proxy has been completely removed from this repo, and is now located at
github.com/linkerd/linkerd2-proxy.
* A `Dockerfile-proxy` has been added to fetch the most-recently published proxy
binary from build.l5d.io.
* Proxy-specific protobuf bindings have been moved to
github.com/linkerd/linkerd2-proxy-api.
* All docker images now use the gcr.io/linkerd-io registry.
* `inject` now uses `LINKERD2_PROXY_` environment variables
* Go paths have been updated to reflect the new (future) repo location.
Paul Balogh
Zahari Dichev
Eugene Glotov
Sergio C. Arteaga
StupidScience
Ivan Sim
Andrew Seigner
Alejandro Pedraza
Dennis Adjei-Baah
Alejandro Pedraza
Katerina
Oliver Gould
Andrew Seigner
Kevin Lingerfelt
Igor Zibarev