Adds a tap endpoint in the web api that communicates with the dashboard
via websockets.
I've moved a bunch of code from the cli tap.go into utils so that the code
can be shared between web and CLI. I think we should consider making the
display more suited to web, but in the short term, reusing the CLI's
rendering of tap events works.
Adds a Tap page in the Web UI that you can use to make tap requests.
The form currently only allows you to enter a resource and namespace,
other filters coming in a follow-up branch.
`ca-bundle-distributor` described the original role of the program but
`ca` ("Certificate Authority") better describes its current role.
Signed-off-by: Brian Smith <brian@briansmith.org>
These files were created with the executable bit set accidentally due
to the way my network file system setup was configured.
Signed-off-by: Brian Smith <brian@briansmith.org>
* Stop using `installsuffix` when building Go code.
See https://plus.google.com/117192131596509381660/posts/eNnNePihYnK.
`-installsuffix cgo` isn't necessary as of Go 1.10 (where build caching
changed substantially) and it probably wasn't necessary earlier.
Signed-off-by: Brian Smith <brian@briansmith.org>
* update grafana dashboards to remove conduit reference and replace with linkerd instances
* update test install fixtures to reflect changes
Fixes: #1315
Signed-off-by: Franziska von der Goltz <franziska@vdgoltz.eu>
The control-plane's `ClusterRole` and `ClusterRoleBinding` objects are
global. Because their names did not vary across multiple control-plane
deployments, it prevented multiple control-planes from coexisting (when
RBAC is enabled).
Modify the `ClusterRole` and `ClusterRoleBinding` objects to include the
control-plane's namespace in their names. Also modify the integration
test to first install two control-planes, and then perform its full
suite of tests, to prevent regression.
Fixes#1292.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
This PR begins to migrate Conduit to Linkerd2:
* The proxy has been completely removed from this repo, and is now located at
github.com/linkerd/linkerd2-proxy.
* A `Dockerfile-proxy` has been added to fetch the most-recently published proxy
binary from build.l5d.io.
* Proxy-specific protobuf bindings have been moved to
github.com/linkerd/linkerd2-proxy-api.
* All docker images now use the gcr.io/linkerd-io registry.
* `inject` now uses `LINKERD2_PROXY_` environment variables
* Go paths have been updated to reflect the new (future) repo location.
Create a ephemeral, in-memory TLS certificate authority and integrate it into the certificate distributor.
Remove the re-creation of deleted ConfigMaps; this will be added back later in #1248.
Signed-off-by: Brian Smith brian@briansmith.org
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
The proxy's metrics are instrumented with a `tls` label that describes
the state of TLS for each connection and associated messges.
This same level of detail is useful to get in `tap` output as well.
This change updates Tap in the following ways:
* `TapEvent` protobuf updated:
* Added `source_meta` field including source labels
* `proxy_direction` enum indicates which proxy server was used.
* The proxy adds a `tls` label to both source and destination meta indicating the state of each peer's connection
* The CLI uses the `proxy_direction` field to determine which `tls` label should be rendered.
If the controller address has a loopback host then don't use TLS to connect
to it. TLS isn't needed for security in that case. In mormal configurations
the proxy isn't terminating TLS for loopback connections anyway.
Signed-off-by: Brian Smith <brian@briansmith.org>
- Return pod uptimes from the GetPods endpoint
- Adds filtering by namespace to api.GetPods
- Adds a --namespace filter to conduit get pods
- Adds pod uptimes to the controller component toolitps on the ServiceMesh page
- Moves the ServiceMesh page back to using /api/pods
Adds the ability to query by a new non-kubernetes resource type, "authorities",
in the StatSummary api.
This includes an extensive refactor of stat_summary.go to deal with non-kubernetes
resource types.
- Add documentation to Resource in the public api so we can use it for authority
- Handle non-k8s resource requests in the StatSummary endpoint
- Rewrite stat summary fetching and parsing to handle non-k8s resources
- keys stat summary metric handling by Resource instead of a generated string
- Adds authority to the CLI
- Adds /authorities to the Web UI
- Adds some more stat integration and unit tests
The `tap` command is prone to panic due to use of `nil` values.
This is because we don't use the safe `Get*()` field accessors
provided by protobuf.
This change fixes several unsafe field access paths.
Fixes#47
* Add TLS support to `conduit inject`.
Add the settings needed to enable TLs when `--tls=optional` is passed on the
commend line. Later the requirement to add `--tls` will be removed.
Signed-off-by: Brian Smith <brian@briansmith.org>
* Add CA certificate bundle distributor to conduit install
* Update ca-distributor to use shared informers
* Only install CA distributor when --enable-tls flag is set
* Only copy CA bundle into namespaces where inject pods have the same controller
* Update API config to only watch pods and configmaps
* Address review feedback
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Add controller admin servers and readiness probes
* Tweak readiness probes to be more sane
* Refactor based on review feedback
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Don't allow the CLI or Web UI to request named resources if --all-namespaces is used.
This follows kubectl, which also does not allow requesting named resources
over all namespaces.
This PR also updates the Web API's behaviour to be in line with the CLI's.
Both will now default to the default namespace if no namespace is specified.
Problem
`conduit stat` would cause a panic for any resource that wasn't in the list
of StatAllResourceTypes
This bug was introduced by https://github.com/runconduit/conduit/pull/1088/files
Solution
Fix writeStatsToBuffer to not depend on what resources are in StatAllResourceTypes
Also adds a unit test and integration test for `conduit stat ns`
The `kubernetes-nodes-cadvisor` Prometheus queries node-level data via
the Kubernetes API server. In some configurations of Kubernetes, namely
minikube and at least one baremetal kubespray cluster, this API call
requires the `get` verb on the `nodes/proxy` resource.
Enable `get` for `nodes/proxy` for the `conduit-prometheus` service
account.
Fixes#912
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
- It would be nice to display container errors in the UI. This PR gets the pod's container
statuses and returns them in the public api
- Also add a terminationMessagePolicy to conduit's inject so that we can capture the
proxy's error messages if it terminates
* Add readiness/liveness checks for third party components
Any possible issues with the third party control plane components can wedge the services.
Take the best practices for prometheus/grafana and add them to our template. See #1116
* Update test fixtures for new output
* Update destination service ot use shared informer instead of custom endpoints informer
* Add additional tests for dst svc endpoints watcher
* Remove service ports when all listeners unsubscribed
* Update go deps
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Previously, in conduit stat all we would just print the map of stat results, which
resulted in the order in which stats were displayed varying between prints.
Fix:
Define an array, k8s.StatAllResourceTypes and use the order in this array to print
the map; ensuring a consistent print order every time the command is run.
* conduit inject: Add flag to set proxy bind timeout (#863)
* fix test
* fix flag to get it working with #909
* Add time parsing
* Use the variable to set the default value
Signed-off-by: Sacha Froment <sfroment42@gmail.com>
- Update the `response_total` prometheus query of the StatSummary endpoint to also
break queries out by a `meshed` label.
- Add a 'Secured' column to the web UI/CLI stat displays, which indicate the percentage of traffic
starting and ending in the mesh
This meshed label is used in the CLI/Web UI to display a column of the percentage of traffic that
starts/ends in the mesh. (Which is a proxy indicator for whether that traffic is 'secured' when we
add TLS by default for intra mesh requests).
The `meshed` label is not yet added anywhere, so until it is supplied by the proxy, all traffic will
show up as 0% secured in the web/CLI.
Running `conduit install --api-port xxx` where xxx != 8086 would yield a
broken install.
Fix the install command to correctly propagate the `api-port` flag,
setting it as the serve address in the proxy-api container.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Remove package-scoped vars in cmd package
* Run gofmt on all cmd package files
* Re-add missing Args setting on check command
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Allow the Stat endpoint in the public-api to accept requests for resourceType "all".
Currently, this queries Pods, Deployments, RCs and Services, but can be modified
to query other resources as well.
Both the CLI and web endpoints now work if you set resourceType to all.
e.g. `conduit stat all`
Kevin Lingerfelt
Risha Mars
Brian Smith
Franziska von der Goltz
Andrew Seigner
Oliver Gould
Thomas Rampelberg
Sacha Froment
Haiwei Liu