- The listener is immediately closed on receipt of a shutdown signal.
- All in-progress server connections are now counted, and the process will
not shutdown until the connection count has dropped to zero.
- In the case of HTTP1, idle connections are closed. In the case of HTTP2,
the HTTP2 graceful shutdown steps are followed of sending various
GOAWAYs.
- Adds environment variables to configure a set of ports that, when an
incoming connection has an SO_ORIGINAL_DST with a port matching, will
disable protocol detection for that connection and immediately start a
TCP proxy.
- Adds a default list of well known ports: SMTP and MySQL.
Closes#339
This PR adds an endpoint to the proxy that serves metrics in Prometheus' text exposition format. The endpoint currently serves the `request_total`, `response_total`, `response_latency_ms`, and `response_duration_ms metrics`, as described in #536. The endpoint's port and address are configurable with the `CONDUIT_PROXY_METRICS_LISTENER` environment variable.
Tests have been added in t`ests/telemetry.rs`
When the proxy is run in a Docker container, it runs as PID 1, with
no default signal handlers setup. In order to react to signals from
Kubernetes about shutting down, we need to set up explicit handlers.
This adds handlers for SIGTERM and SIGINT.
Closes#549
* Temporarily stop trying to support configurable zones in the proxy.
None of the zone configuration is tested and lots of things assume the cluster
zone is `cluster.local`. Further, how exactly the proxy will actually learn the
cluster zone hasn't been decided yet.
Just hard-code the zone as "cluster.local" in the proxy until configurable zones
are fully implemented and tested to be working correctly.
Signed-off-by: Brian Smith <brian@briansmith.org>
* Remove the CONDUIT_PROXY_DESTINATIONS_AUTOCOMPLETE_FQDN setting
The way that Kubernetes configures DNS search suffixes has some negative
consequences as some names like "example.com" are ambiguous: depending on
whether there is a service "example" in the "com" namespace, "example.com"
may refer to an external service or an internal service, and this can
fluctuate over time. In recognition of that we added the
CONDUIT_PROXY_DESTINATIONS_AUTOCOMPLETE_FQDN setting, thinking this would
be part of a solution for users to opt out of the unfortunate behavior
if their applications didn't depend on the DNS search suffix feature.
It turns out similar effects can be acheived using a custom dnsConfig,
starting in Kubernetes 1.10 when dnsConfig reaches the beta stability level.
Now any CONDUIT_PROXY_DESTINATIONS_AUTOCOMPLETE_FQDN-based seems duplicative.
Further, attempting to support it optionally made the code complex and hard
to read.
Therefore, let's just remove it. If/when somebody actually requests this
functionality then we can add it back, if dnsConfig isn't a valid alternative
for them.
Signed-off-by: Brian Smith <brian@briansmith.org>
* Further hard-code "cluster.local" as the zone, temporarily.
Addresses review feedback.
Signed-off-by: Brian Smith <brian@briansmith.org>
This PR ensures that the mapping of requests to outbound connections is segregated by `Host:` header values. In most cases, the desired behavior is provided by Hyper's connection pooling. However, Hyper does not handle the case where a request had no `Host:` header and the request URI had no authority part, and the request was routed based on the SO_ORIGINAL_DST in the desired manner. We would like these requests to each have their own outbound connection, but Hyper will reuse the same connection for such requests.
Therefore, I have modified `conduit_proxy_router::Recognize` to allow implementations of `Recognize` to indicate whether the service for a given key can be cached, and to only cache the service when it is marked as cachable. I've also changed the `reconstruct_uri` function, which rewrites HTTP/1 requests, to mark when a request had no authority and no `Host:` header, and the authority was rewritten to be the request's ORIGINAL_DST. When this is the case, the `Recognize` implementations for `Inbound` and `Outbound` will mark these requests as non-cachable.
I've also added unit tests ensuring that A, connections are created per `Host:` header, and B, that requests with no `Host:` header each create a new connection. The first test passes without any additional changes, but the second only passes on this branch. The tests were added in PR #489, but this branch supersedes that branch.
Fixes#415. Closes#489.
Closes#403.
When the Destination service does not return a result for a service, the proxy connection for that service will hang indefinitely waiting for a result from Destination. If, for example, the requested name doesn't exist, this means that the proxy will wait forever, rather than responding with an error.
I've added a timeout wrapping the service returned from `<Outbound as Recognize>::bind_service`. The timeout can be configured by setting the `CONDUIT_PROXY_BIND_TIMEOUT` environment variable, and defaults to 10 seconds (because that's the default value for [a similar configuration in Linkerd](https://linkerd.io/config/1.3.5/linkerd/index.html#router-parameters)).
Testing with @klingerf's reproduction from #403:
```
curl -sIH 'Host: httpbin.org' $(minikube service proxy-http --url)/get | head -n1
HTTP/1.1 500 Internal Server Error
```
proxy logs:
```rust
proxy-5698f79b66-8rczl conduit-proxy INFO conduit_proxy using controller at HostAndPort { host: Domain("proxy-api.conduit.svc.cluster.local"), port: 8086 }
proxy-5698f79b66-8rczl conduit-proxy INFO conduit_proxy routing on V4(127.0.0.1:4140)
proxy-5698f79b66-8rczl conduit-proxy INFO conduit_proxy proxying on V4(0.0.0.0:4143) to None
proxy-5698f79b66-8rczl conduit-proxy INFO conduit_proxy::transport::connect "controller-client", DNS resolved proxy-api.conduit.svc.cluster.local to 10.0.0.240
proxy-5698f79b66-8rczl conduit-proxy ERR! conduit_proxy::map_err turning service error into 500: Inner(Timeout(Duration { secs: 10, nanos: 0 }))
```
The proxy will check that the requested authority looks like a local service, and if it doesn't, it will no longer ask the Destination service about the request, instead just using the SO_ORIGINAL_DST, enabling egress naturally.
The rules used to determine if it looks like a local service come from this comment:
> If default_zone.is_none() and the name is in the form $a.$b.svc, or if !default_zone.is_none() and the name is in the form $a.$b.svc.$default_zone, for some a and some b, then use the Destination service. Otherwise, use the IP given.
The proxy depends on `protoc`-generated gRPC bindings to communicate
with the controller. In order to generate these bindings, build-time
dependencies must be compiled.
In order to support a more granular, cacheable build scheme, a new crate
has been created to house these gRPC bindings,
`conduit-proxy-controller-grpc`.
Because `TryFrom` and `TryInto` conversions are implemented for
protobuf-defined types, the `convert` module also had to be moved to
into a dedicated crate.
Furthermore, because the proxy's tests require that
`quickcheck::Aribtrary` be implemented for protobuf types, the
`conduit-proxy-controller-grpc` crate supports an _arbitrary_ feature
fla protobuf types, the `conduit-proxy-controller-grpc` crate supports
an _arbitrary_ feature flag.
While we're moving these libraries around, the `tower-router` crate has
been moved to `proxy/router` and renamed to `conduit-proxy-router.`
`futures-mpsc-lossy` has been moved into the proxy directory but has not
been renamed.
Finally, the `proxy/Dockerfile-deps` image has been updated to avoid the
wasteful building of dependency artifacts, as they are not actually used
by `proxy/Dockerfile`.
The proxy will now try to detect what protocol new connections are
using, and route them accordingly. Specifically:
- HTTP/2 stays the same.
- HTTP/1 is now accepted, and will try to send an HTTP/1 request
to the target.
- If neither HTTP/1 nor 2, assume a TCP stream and simply forward
between the source and destination.
* tower-h2: fix Server Clone bounds
* proxy: implement Async{Read,Write} extra methods for Connection
Closes#130Closes#131
* Proxy: Use production config parsing in tests
Previosuly the testing code for the proxy was sensitive to the values
of environment variables unintentionally, because `Config` looked at
the environment variables. Also, the tests were largely avoiding
testing the production configuration parsing code since they were
doing their own parsing.
Now the tests avoid looking at environment variables other than
`ENV_LOG`, which makes them more resilient. Also the tests now parse
the settings using the same code as production use uses.
I validated this manually.
We’ve built Conduit from the ground up to be the fastest, lightest,
simplest, and most secure service mesh in the world. It features an
incredibly fast and safe data plane written in Rust, a simple yet
powerful control plane written in Go, and a design that’s focused on
performance, security, and usability. Most importantly, Conduit
incorporates the many lessons we’ve learned from over 18 months of
production service mesh experience with Linkerd.
This repository contains a few tightly-related components:
- `proxy` -- an HTTP/2 proxy written in Rust;
- `controller` -- a control plane written in Go with gRPC;
- `web` -- a UI written in React, served by Go.
Sean McArthur
Oliver Gould
Eliza Weisman
Brian Smith