Adds a flag, tcp_stats to the StatSummary request, which queries prometheus for TCP stats.
This branch returns TCP stats at /api/tps-reports when this flag is true.
TCP stats are now displayed on the Resource Detail pages.
The current queried TCP stats are:
tcp_open_connections
tcp_read_bytes_total
tcp_write_bytes_total
The Proxy API service lacked introspection of its internal state.
Introduce a new gRPC Discovery API, implemented by two servers:
1) Proxy API Server: returns a snapshot of discovery state
2) Public API Server: pass-through to the Proxy API Server
Also wire up a new `linkerd endpoints` command.
Fixes#2165
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Introduce resource selector and deprecate namespace field for ListPods
* Changes from code review
* Properly deprecate the field
* Do not check for nil
* Fix the mockProm usage
* Protoc changes revert
* Changed from code review
Signed-off-by: Alena Varkockova <varkockova.a@gmail.com>
Fixes#1875
This change improves the `linkerd routes` command in a number of important ways:
* The restriction on the type of the `--to` argument is lifted and any resource type can now be used. Try `--to ns/books`, `--to po/webapp-ABCDEF`, `--to au/linkerd.io`, or even `--to svc`.
* All routes for the target will now be populated in the table, even if there are no Prometheus metrics for that route.
* [UNKNOWN] has been renamed to [DEFAULT]
* The `Service/Authority` column will now list `Service` in all cases except for when an authority target is explicitly requested.
```
$ linkerd routes deploy/traffic --to deploy/webapp
ROUTE SERVICE SUCCESS RPS LATENCY_P50 LATENCY_P95 LATENCY_P99
GET / webapp 100.00% 0.5rps 50ms 180ms 196ms
GET /authors/{id} webapp 100.00% 0.5rps 100ms 900ms 980ms
GET /books/{id} webapp 100.00% 0.9rps 38ms 93ms 99ms
POST /authors webapp 100.00% 0.5rps 35ms 48ms 50ms
POST /authors/{id}/delete webapp 100.00% 0.5rps 83ms 180ms 196ms
POST /authors/{id}/edit webapp 0.00% 0.0rps 0ms 0ms 0ms
POST /books webapp 45.16% 2.1rps 75ms 425ms 485ms
POST /books/{id}/delete webapp 100.00% 0.5rps 30ms 90ms 98ms
POST /books/{id}/edit webapp 56.00% 0.8rps 92ms 875ms 975ms
[DEFAULT] webapp 0.00% 0.0rps 0ms 0ms 0ms
```
This is all made possible by a shift in the way we handle the destination resource. When we get a request with a `ToResource`, we use the k8s API to find all Services which include at least one pod belonging to that resource. We then fetch all service profiles for those services and display the routes from those serivce profiles.
This shift in thinking also precipitates a change in the TopRoutes API where we no longer need special cases for `ToAll` (which can be specified by `--to au`) or `ToAuthority` (which can be specified by `--to au/<authority>`) and instead can use a `ToResource` to handle all cases.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Add parameter to stats API to skip retrieving Prometheus stats
Used by the dashboard to populate list of resources.
Fixes#1022
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* Prometheus queries check results were being ignored
* Refactor verifyPromQueries() to also test when no prometheus queries
should be generated
* Add test for SkipStats=true
Includes adding ability to public.GenStatSummaryResponse to not generate
basicStats
* Fix previous test
We rework the routes command so that it can accept any Kubernetes resource, making it act much more similarly to the stat command.
Signed-off-by: Alex Leong <alex@buoyant.io>
This change alters the controller's Tap service to include route labels
when translating tap events, modifies the public API to include route
metadata in responses, and modifies the tap CLI command to include
rt_ labels in tap output (when -o wide is used).
Add a barebones ListServices endpoint, in support of autocomplete for services.
As we develop service profiles, this endpoint could probably be used to describe
more aspects of services (like, if there were some way to check whether a
service profile was enabled or not).
Accessible from the web UI via http://localhost:8084/api/services
Add a routes command which displays per-route stats for services that have service profiles defined.
This change has three parts:
* A new public-api RPC called `TopRoutes` which serves per-route stat data about a service
* An implementation of TopRoutes in the public-api service. This implementation reads per-route data from Prometheus. This is very similar to how the StatSummaries RPC and much of the code was able to be refactored and shared.
* A new CLI command called `routes` which displays the per-route data in a tabular or json format. This is very similar to the `stat` command and much of the code was able to be refactored and shared.
Note that as of the currently targeted proxy version, only outbound route stats are supported so the `--from` flag must be included in order to see data. This restriction will be lifted in an upcoming change once we add support for inbound route stats as well.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Use ListPods always for data plane HC
* Missing changes in grpc_server.go
* Address review comments
* Read proxy version from spec
Signed-off-by: Alena Varkockova <varkockova.a@gmail.com>
This PR begins to migrate Conduit to Linkerd2:
* The proxy has been completely removed from this repo, and is now located at
github.com/linkerd/linkerd2-proxy.
* A `Dockerfile-proxy` has been added to fetch the most-recently published proxy
binary from build.l5d.io.
* Proxy-specific protobuf bindings have been moved to
github.com/linkerd/linkerd2-proxy-api.
* All docker images now use the gcr.io/linkerd-io registry.
* `inject` now uses `LINKERD2_PROXY_` environment variables
* Go paths have been updated to reflect the new (future) repo location.
- Add Reason to the error data passed from the api
- Rewrite error logic in the UI to try to make it clearer
- Show 0/0 pods meshed instead of 0/0 pods meshed (N/A) if 0 pods are meshed
- Return pod uptimes from the GetPods endpoint
- Adds filtering by namespace to api.GetPods
- Adds a --namespace filter to conduit get pods
- Adds pod uptimes to the controller component toolitps on the ServiceMesh page
- Moves the ServiceMesh page back to using /api/pods
Adds the ability to query by a new non-kubernetes resource type, "authorities",
in the StatSummary api.
This includes an extensive refactor of stat_summary.go to deal with non-kubernetes
resource types.
- Add documentation to Resource in the public api so we can use it for authority
- Handle non-k8s resource requests in the StatSummary endpoint
- Rewrite stat summary fetching and parsing to handle non-k8s resources
- keys stat summary metric handling by Resource instead of a generated string
- Adds authority to the CLI
- Adds /authorities to the Web UI
- Adds some more stat integration and unit tests
- It would be nice to display container errors in the UI. This PR gets the pod's container
statuses and returns them in the public api
- Also add a terminationMessagePolicy to conduit's inject so that we can capture the
proxy's error messages if it terminates
protobuf has a `go_package` option that can be used to explicitly name
Go packages such that they can be imported without additional rewrites.
This allows us to store proto files without additional, redundant
directories (which were used for packaging hints, previously).
This change adds an explicit `go_package` to all .proto files and
updates `bin/protoc-go.sh` to ensure these packages are output into
$GOPATH (so that the go_package can be absolute). This removes the need
to manually rewrite imports in bin/protoc-go.sh.
harsh jain
Alejandro Pedraza
Risha Mars
Andrew Seigner
Alena Varkockova
Alex Leong
Oliver Gould
Kevin Lingerfelt