Currently, public-api is part of the core control-plane where
the prom check fails when ran before the viz extension is installed.
This change comments out that check, Once metrics api is moved into
viz, maybe this check can be part of it instead or directly part of
`linkerd viz check`.
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
Co-authored-by: Kevin Leimkuhler <kevin@kleimkuhler.com>
Fixes#5143
The availability of prometheus is useful for some calls in public-api
that the check uses. This change updates the ListPods in public-api
to still return the pods even when prometheus is not configured.
For a test that exclusively checks for prometheus metrics, we have a gate
which checks if a prometheus is configured and skips it othervise.
Signed-off-by: Tarun Pothulapati tarunpothulapati@outlook.com
* Remove dependency of linkerd-config for most control plane components
This PR removes the dependency of `linkerd-config` into control
plane components by making all that information passed through CLI
flags. As most of these components require a couple of flags, passing
them as flags could be more helpful, as updations to the flags trigger a
rollout unlike a configMap update.
This does not update the proxy-injector as it needs a lot more data
and mounting `linkerd-config` is better.
Fixes#4191#4993
This bumps Kubernetes client-go to the latest v0.19.2 (We had to switch directly to 1.19 because of this issue). Bumping to v0.19.2 required upgrading to smi-sdk-go v0.4.1. This also depends on linkerd/stern#5
This consists of the following changes:
- Fix ./bin/update-codegen.sh by adding the template path to the gen commands, as it is needed after we moved to GOMOD.
- Bump all k8s related dependencies to v0.19.2
- Generate CRD types, client code using the latest k8s.io/code-generator
- Use context.Context as the first argument, in all code paths that touch the k8s client-go interface
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
* Removes/Relaxes prometheus related checks
Now that prometheus is an add-on, There can be cases where prometheus is
disabled at which the check should show a warning but not fail. This
decouples the tight depedency.
This changes the following checks:
- Removes serviceAccount and pod checks in the CLI.
- Relaxes `linkerd-api` checks to only check for prometheus access when
the URL is not empty. This should work seamlessly with external
prometheus as that URL will be passed and it performs the same
check.
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
Regenerated protobuf files, using version 1.4.2 that was upgraded from
1.3.2 with the proxy-api update in #4614.
As of v1.4 protobuf messages are disallowed to be copied (because they
hold a mutex), so whenever a message is passed to or returned from a
function we need to use a pointer.
This affects _mostly_ test files.
This is required to unblock #4620 which is adding a field to the config
protobuf.
**Subject**
Fixes bug where override of Docker registry was not being applied to debug containers (#3851)
**Problem**
Overrides for Docker registry are not being applied to debug containers and provide no means to correct the image.
**Solution**
This update expands the `data.proxy` configuration section within the Linkerd `ConfigMap` to maintain the overridden image name for debug containers at _install_-time similar to handling of the `proxy` and `proxyInit` images.
This change also enables the further override option of the registry for debug containers at _inject_-time given utilization of the `--registry` CLI option.
**Validation**
Several new unit tests have been created to confirm functionality. In addition, the following workflows were run through:
### Standard Workflow with Custom Registry
This workflow installs Linkerd control plane based upon a custom registry, then injecting the debug sidecar into a service.
* Start with a k8s instance having no Linkerd installation
* Build all images locally using `bin/docker-build`
* Create custom tags (using same version) for generated images, e.g. `docker tag gcr.io/linkerd-io/debug:git-a4ebecb6 javaducky.com/linkerd-io/debug:git-a4ebecb6`
* Install Linkerd with registry override `bin/linkerd install --registry=javaducky.com/linkerd-io | kubectl apply -f -`
* Once Linkerd has been fully initialized, you should be able to confirm that the `linkerd-config` ConfigMap now contains the debug image name, pull policy, and version within the `data.proxy` section
* Request injection of the debug image into an available container. I used the Emojivoto voting service as described in https://linkerd.io/2/tasks/using-the-debug-container/ as `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar - | kubectl apply -f -`
* Once the deployment creates a new pod for the service, inspection should show that the container now includes the "linkerd-debug" container name based on the applicable override image seen previously within the ConfigMap
* Debugging can also be verified by viewing debug container logs as `kubectl -n emojivoto logs deploy/voting linkerd-debug -f`
* Modifying the `config.linkerd.io/enable-debug-sidecar` annotation, setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Overriding the Custom Registry Override at Injection
This builds upon the “Standard Workflow with Custom Registry” by overriding the Docker registry utilized for the debug container at the time of injection.
* “Clean” the Emojivoto voting service by removing any Linkerd annotations from the deployment
* Request injection similar to before, except provide the `--registry` option as in `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar --registry=gcr.io/linkerd-io - | kubectl apply -f -`
* Inspection of the deployment config should now show the override annotation for `config.linkerd.io/debug-image` having the debug container from the new registry. Viewing the running pod should show that the `linkerd-debug` container was injected and running the correct image. Of note, the proxy and proxy-init images are still running the “original” override images.
* As before, modifying the `config.linkerd.io/enable-debug-sidecar` annotation setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Standard Workflow with Default Registry
This workflow is the typical workflow which utilizes the standard Linkerd image registry.
* Uninstall the Linkerd control plane using `bin/linkerd install --ignore-cluster | kubectl delete -f -` as described at https://linkerd.io/2/tasks/uninstall/
* Clean the Emojivoto environment using `curl -sL https://run.linkerd.io/emojivoto.yml | kubectl delete -f -` then reinstall using `curl -sL https://run.linkerd.io/emojivoto.yml | kubectl apply -f -`
* Perform standard Linkerd installation as `bin/linkerd install | kubectl apply -f -`
* Once Linkerd has been fully initialized, you should be able to confirm that the `linkerd-config` ConfigMap references the default debug image of `gcr.io/linkerd-io/debug` within the `data.proxy` section
* Request injection of the debug image into an available container as `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar - | kubectl apply -f -`
* Debugging can also be verified by viewing debug container logs as `kubectl -n emojivoto logs deploy/voting linkerd-debug -f`
* Modifying the `config.linkerd.io/enable-debug-sidecar` annotation, setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Overriding the Default Registry at Injection
This workflow builds upon the “Standard Workflow with Default Registry” by overriding the Docker registry utilized for the debug container at the time of injection.
* “Clean” the Emojivoto voting service by removing any Linkerd annotations from the deployment
* Request injection similar to before, except provide the `--registry` option as in `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar --registry=javaducky.com/linkerd-io - | kubectl apply -f -`
* Inspection of the deployment config should now show the override annotation for `config.linkerd.io/debug-image` having the debug container from the new registry. Viewing the running pod should show that the `linkerd-debug` container was injected and running the correct image. Of note, the proxy and proxy-init images are still running the “original” override images.
* As before, modifying the `config.linkerd.io/enable-debug-sidecar` annotation setting to “false”, should show that the pod will be recreated no longer running the debug container.
Fixes issue #3851
Signed-off-by: Paul Balogh javaducky@gmail.com
Followup to #2990, which refactored `linkerd endpoints` to use the
`Destination.Get` API instead of the `Discovery.Endpoints` API, leaving
the Discovery with no implented methods. This PR removes all the Discovery
code leftovers.
Fixes#3499
* Set custom cluster domain in GetServiceProfileFor
* Set custom cluster domain in tap server
Move fetching cluster domain for tap server to cmd main
* Handle fetchting cluster domain errors separately
* Use custom cluster domain for traffic split adaptor
Signed-off-by: Armin Buerkle <armin.buerkle@alfatraining.de>
* Have the proxy-injector emit events upon injection/skipping injection
Fixes#3253
Have the proxy-injector emit an event whenever a injection happens, or
when injection is skipped for some reason (also added that reason into
the proxy-injector logs). The level is associated to the parent workload
(it can't be associated to the pod because at this point the pod hasn't
been persisted).
The event recorder was setup at the `webhook/server.go` level and passed
to the proxy-injector's `Inject` function. The sp-validator thus also
has access to the event recorder, but for now it's not using it.
Related changes:
- Refactored `api.GetOwnerKindAndName()` to have it return a more
generic object.
- Refactored `report.Injectable()` to also have it return the reason why
a workload is not injectable.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
### Summary
After the addition of the tap APIServer, all the logic related to tap in the public API no longer needs to be there. The servers and clients that are created but not used, as well as all the old testing infrastrucure related to tap can be removed.
This deprecates TapByResource and therefore required an update to the protobuf files with `bin/protoc-go.sh`. While the change to deprecate this method was extremely small, a lot of protobuf fils were updated in the process. These changes to the code and protobuf files should probably remain coupled since `TapByResource` is officially deprecated in the public API, but a majority of the additions/deletions are related to those files.
This draft passes `go test` as well as a local run of the integration tests.
Signed-off-by: Kevin Leimkuhler <kleimkuhler@icloud.com>
* Have `linkerd endpoints` use `Destination.Get`
Fixes#2885
We're refactoring `linkerd endpoints` so it hits
directly the `Destination.Get` endpoint, instead of relying on the
Discovery service.
For that, I've created a new `client.go` for Destination and added it to
the `APIClient` interface.
I've also added a `destinationClient` struct that mimics `tapClient`,
and whose common logic has been moved into `stream_client.go`.
Analogously, I added a `destinationServer` struct that mimics
`tapServer`.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Have `GetOwnerKindAndName` be able to skip the cache
Refactored `GetOwnerKindAndName` so it can optionally skip the
shared informer cache and instead hit the k8s API directly.
Useful for the proxy injector, when the pod's replicaset got just
created and might not be in ready in the cache yet.
Fixes#2738
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
The control-plane components relied on a `--single-namespace` param,
passed from `linkerd install` into each individual component, to
determine which namespaces they were authorized to access, and whether
to support ServiceProfiles. This command-line flag was redundant given
the authorization rules encoded in the parent `linkerd install` output,
via [Cluster]Role[Binding]s.
Modify the control-plane components to query Kubernetes at startup to
determine which namespaces they are authorized to access, and whether
ServiceProfile support is available. This allows removal of the
`--single-namespace` flag on the components.
Also update `bin/test-cleanup` to cleanup the ServiceProfile CRD.
TODO:
- Remove `--single-namespace` flag on `linkerd install`, part of #2164
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The Proxy API service lacked introspection of its internal state.
Introduce a new gRPC Discovery API, implemented by two servers:
1) Proxy API Server: returns a snapshot of discovery state
2) Public API Server: pass-through to the Proxy API Server
Also wire up a new `linkerd endpoints` command.
Fixes#2165
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Fixes#2119
When Linkerd is installed in single-namespace mode, the public-api container panics when it attempts to access watch service profiles.
In single-namespace mode, we no longer watch service profiles and return an informative error when the TopRoutes API is called.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Introduce resource selector and deprecate namespace field for ListPods
* Changes from code review
* Properly deprecate the field
* Do not check for nil
* Fix the mockProm usage
* Protoc changes revert
* Changed from code review
Signed-off-by: Alena Varkockova <varkockova.a@gmail.com>
Commit 1: Enable lint check for comments
Part of #217. Follow up from #1982 and #2018.
A subsequent commit will fix the ci failure.
Commit 2: Address all comment-related linter errors.
This change addresses all comment-related linter errors by doing the
following:
- Add comments to exported symbols
- Make some exported symbols private
- Recommend via TODOs that some exported symbols should should move or
be removed
This PR does not:
- Modify, move, or remove any code
- Modify existing comments
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Add a barebones ListServices endpoint, in support of autocomplete for services.
As we develop service profiles, this endpoint could probably be used to describe
more aspects of services (like, if there were some way to check whether a
service profile was enabled or not).
Accessible from the web UI via http://localhost:8084/api/services
* Use ListPods always for data plane HC
* Missing changes in grpc_server.go
* Address review comments
* Read proxy version from spec
Signed-off-by: Alena Varkockova <varkockova.a@gmail.com>
* Update ant to 3.7.2
* Add autocomplete of namespaces/resources to Tap in web ui
* Add form fields for authority/path/method/rps/scheme
* Add the ability to clear error messages to the error banner
* Add error listener to ws object
This PR begins to migrate Conduit to Linkerd2:
* The proxy has been completely removed from this repo, and is now located at
github.com/linkerd/linkerd2-proxy.
* A `Dockerfile-proxy` has been added to fetch the most-recently published proxy
binary from build.l5d.io.
* Proxy-specific protobuf bindings have been moved to
github.com/linkerd/linkerd2-proxy-api.
* All docker images now use the gcr.io/linkerd-io registry.
* `inject` now uses `LINKERD2_PROXY_` environment variables
* Go paths have been updated to reflect the new (future) repo location.
- Return pod uptimes from the GetPods endpoint
- Adds filtering by namespace to api.GetPods
- Adds a --namespace filter to conduit get pods
- Adds pod uptimes to the controller component toolitps on the ServiceMesh page
- Moves the ServiceMesh page back to using /api/pods
The `conduit tap` command is now deprecated.
Replace `conduit tap` with `connduit tapByResource`. Rename tapByResource
to tap. The underlying protobuf for tap remains, the tap gRPC endpoint now
returns Unimplemented.
Fixes#804
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
public-api and and tap were both using their own implementations of
the Kubernetes Informer/Lister APIs.
This change factors out all Informer/Lister usage into the Lister
module. This also introduces a new `Lister.GetObjects` method.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The `stat` command did not support `service` as a resource type.
This change adds `service` support to the `stat` command. Specifically:
- as a destination resource on `--to` commands
- as a target resource on `--from` commands
Fixes#805
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
This changes the public api to have a new rpc type, `TapByResource`.
This api supersedes the Tap api. `TapByResource` is richer, more closely
reflecting the proxy's capabilities.
The proxy's Tap api is extended to select over destination labels,
corresponding with those returned by the Destination api.
Now both `Tap` and `TapByResource`'s responses may include destination
labels.
This change avoids breaking backwards compatibility by:
* introducing the new `TapByResource` rpc type, opting not to change Tap
* extending the proxy's Match type with a new, optional, `destination_label` field.
* `TapEvent` is extended with a new, optional, `destination_meta`.
* Add namespace as a resource type in public-api
The cli and public-api only supported deployments as a resource type.
This change adds support for namespace as a resource type in the cli and
public-api. This also change includes:
- cli statsummary now prints `-`'s when objects are not in the mesh
- cli statsummary prints `No resources found.` when applicable
- removed `out-` from cli statsummary flags, and analagous proto changes
- switched public-api to use native prometheus label types
- misc error handling and logging fixes
Part of #627
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Refactor filter and groupby label formulation
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Rename stat_summary.go to stat.go in cli
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Update rbac privileges for namespace stats
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Conduit was relying on apps/v1 to Deployment and ReplicaSet APIs.
apps/v1 is not available on Kubernetes 1.8. This prevented the
public-api from starting.
Switch Conduit to use apps/v1beta2. Also increase the Kubernetes API
cache sync timeout from 10 to 60 seconds, as it was taking 11 seconds on
a test cluster.
Fixes#761
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Remove the telemetry service
The telemetry service is no longer needed, now that prometheus scrapes
metrics directly from proxies, and the public-api talks directly to
prometheus. In this branch I'm removing the service itself as well as
all of the telemetry protobuf, and updating the conduit install command
to no longer install the service. I'm also removing the old version of
the stat command, which required the telemetry service, and renaming the
statsummary command to stat.
* Fix time window tests
* Remove deprecated controller scrape config
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
The ListPods endpoint's logic resides in the telemetry service, which is
going away.
Move ListPods logic into public-api, use new k8s informer APIs.
Fixes#694
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Switch public API to use cached k8s resources
* Move shared informer code to separate goroutine
* Fix spelling issue
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
The StatSummary logic was implemented as a method on http_server.
Move the StatSummary logic into grpc_server, for consistency with the
other endpoints.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Start implementing new conduit stat summary endpoint.
Changes the public-api to call prometheus directly instead of the
telemetry service. Wired through to `api/stat` on the web server,
as well as `conduit statsummary` on the CLI. Works for deployments only.
Current implementation just retrieves requests and mesh/total pod count
(so latency stats are always 0).
Uses API defined in #663
Example queries the stat endpoint will eventually satisfy in #627
This branch includes commits from @klingerf
* run ./bin/dep ensure
* run ./bin/update-go-deps-shas
* Define a new telemetry Stat API
Proposal definition for a new Stat API, for the purposes of satisfying the queries proposed in #627.
StatSummary will replace Stat once implemented and the original Stat deleted.
When the conduit proxy is injected into the controller pod, we observe controller pod proxy stats show up as an "outbound" deployment for an unrelated upstream deployment. This may cause confusion when monitoring deployments in the service mesh.
This PR filters out this "misleading" stat in the public api whenever the dashboard requests metric information for a specific deployment.
* exclude telemetry generated by the control plane when requesting deployment metrics
fixes#370
Signed-off-by: Dennis Adjei-Baah <dennis@buoyant.io>
In PR #298 we moved time window parsing (10s => (time.now - 10s,
time.now) down the stack to immediately before the query. This had the
unintended effect of creating parallel latency quantile requests with
slightly different timestamps.
This change parses the time window prior to latency quantile fan out,
ensuring all requests have the same timestamp.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
PR #298 moved summary (non-timeseries) requests to Prometheus' Query
endpoint, with no timestamp provided. This Query endpoint returns a
single data point with whatever timestamp was provided in the request.
In the absense of a timestamp, it uses current server time. This causes
the Public API to return discreet data points with slightly different
timestamps, which is unexpected behavior.
Modify the Public API -> Telemetry -> Prometheus request path to always
require a timestamp for single data point requests.
Fixes#340
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Tarun Pothulapati
Alejandro Pedraza
Paul Balogh
arminbuerkle
Kevin Leimkuhler
Alejandro Pedraza
Andrew Seigner
Kevin Lingerfelt
Alena Varkockova
Alex Leong
Risha Mars
Oliver Gould
Dennis Adjei-Baah