* The 'linkerd-version' CLI flag is renamed to 'control-plane-version'
* Add version field to proxy config
* Add the control plane version to the global config
* Unit test for init image version
* Use more specific control plane and proxy versions in unit tests
Signed-off-by: Ivan Sim <ivan@buoyant.io>
This is an initial change to separate out config-specific k8s objects
from the control-plane components. The eventual goal will be rendering
these configs as the first stage of a multi-stage install.
Part of #2337
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Add validation webhook for service profiles
Fixes#2075
Todo in a follow-up PRs: remove the SP check from the CLI check.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Disable external profiles by default
* Rename the --disable-external-profiles flag to --enable-external-profiles
Signed-off-by: Ivan Sim <ivan@buoyant.io>
`storage.tsdb.retention` is deprecated in favor of
`storage.tsdb.retention.time`.
Replace all occurrences.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
When installing Linkerd, a user may override default settings, or may
explicitly configure defaults. Consider install options like `--ha
--controller-replicas=4` -- the `--ha` flag sets a new default value for
the controller-replicas, and then we override it.
When we later upgrade this cluster, how can we know how to configure the
cluster?
We could store EnableHA and ControllerReplicas configurations in the
config, but what if, in a later upgrade, the default value changes? How
can we know whether the user specified an override or just used the
default?
To solve this, we add an `Install` message into a new config.
This message includes (at least) the CLI flags used to invoke
install.
upgrade does not specify defaults for install/proxy-options fields and,
instead, uses the persisted install flags to populate default values,
before applying overrides from the upgrade invocation.
This change breaks the protobuf compatibility by altering the
`installation_uuid` field introduced in 9c442f6885.
Because this change was not yet released (even in an edge release), we
feel that it is safe to break.
Fixes https://github.com/linkerd/linkerd2/issues/2574
Some of our templates have started to use 'with .Values' scoping to
limit boilerplate within the tempates.
This change makes this uniform in all templates.
Have the Webhook react to pod creation/update only
This was already working almost out-of-the-box, just had to:
- Change the webhook config so it watches pods instead of deployments
- Grant some extra ClusterRole permissions
- Add the piece that figures what's the OwnerReference and add the label
for it
- Manually inject service account mount paths
- Readd volumes tests
Fixes#2342 and #1751
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
This change reintroduces identity hinting to the destination service.
The Get endpoint includes identities for pods that are injected with an
identity-mode of "default" and have the same linkerd control plane.
A `serviceaccount` label is now also added to destination response
metadata so that it's accessible in prometheus and tap.
Because the linkerd-config resource is created after pods that require
it, they can be started before the files are mounted, causing the pods
to restart integration tests to fail.
If we extract the config into its own template file, it can be inserted
before pods are created.
https://github.com/linkerd/linkerd2/pull/2521 introduces an "Identity"
controller, but there is no way to include it in linkerd installation.
This change alters the `install` flow as follows:
- An Identity service is _always_ installed;
- Issuer credentials may be specified via the CLI;
- If no Issuer credentials are provided, they are generated each time `install` is called.
- Proxies are NOT configured to use the identity service.
- It's possible to override the credential generation logic---especially
for tests---via install options that can be configured via the CLI.
The new proxy has changed its configuration as follows:
- `LISTENER` urls are now `LISTEN_ADDR` addresses;
- `CONTROL_URL` is now `DESTINATION_SVC_ADDR`;
- `*_NAMESPACE` vars are no longer needed;
- The `PROXY_ID` is now the `DESTINATION_CONTEXT`;
- The "metrics" port is now the "admin" port, since it serves more than
just metrics;
- A readiness probe now checks a dedicated /ready endpoint eagerly.
Identity injection is **NOT** configured by this branch.
The proxy's TLS implementation has changed to use a new _Identity_ controller.
In preparation for this, the `--tls=optional` CLI flag has been removed
from install and inject; and the `ca` controller has been deleted. Metrics
and UI treatments for TLS have **not** been removed, as they will continue to
be valuable for the new Identity system.
With the removal of the old identity scheme, the Destination service's proxy
ID field is now set with an opaque string (e.g. `ns:emojivoto`) to enable
locality awareness.
linkerd/linkerd2#1721 introduced a `--single-namespace` install flag,
enabling the control-plane to function within a single namespace. With
the introduction of ServiceProfiles, and upcoming identity changes, this
single namespace mode of operation is becoming less viable.
This change removes the `--single-namespace` install flag, and all
underlying support. The control-plane must have cluster-wide access to
operate.
A few related changes:
- Remove `--single-namespace` from `linkerd check`, this motivates
combining some check categories, as we can always assume cluster-wide
requirements.
- Simplify the `k8s.ResourceAuthz` API, as callers no longer need to
make a decision based on cluster-wide vs. namespace-wide access.
Components either have access, or they error out.
- Modify the web dashboard to always assume ServiceProfiles are enabled.
Reverts #1721
Part of #2337
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Changed the protobuf definition to take out destinationApiPort entirely
* Store destinationAPIPort as a constant in pkg/inject.go
Fixes#2351
Signed-off-by: Aditya Sharma <hello@adi.run>
This ensures that the MWC always picks up the latest config template during version upgrade.
The removed `update()` method and RBAC permissions are superseded by @2163.
Signed-off-by: Ivan Sim <ivan@buoyant.io>
- Created the pkg/inject package to hold the new injection shared lib.
- Extracted from `/cli/cmd/inject.go` and `/cli/cmd/inject_util.go`
the core methods doing the workload parsing and injection, and moved them into
`/pkg/inject/inject.go`. The CLI files should now deal only with
strictly CLI concerns, and applying the json patch returned by the new
lib.
- Proceeded analogously with `/cli/cmd/uninject.go` and
`/pkg/inject/uninject.go`.
- The `InjectReport` struct and helping methods were moved into
`/pkg/inject/report.go`
- Refactored webhook to use the new injection lib
- Removed linkerd-proxy-injector-sidecar-config ConfigMap
- Added the ability to add pod labels and annotations without having to
specify the already existing ones
Fixes#1748, #2289
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
linkerd/linkerd2#2349 introduced a `SelfSubjectAccessReview` check at
startup, to determine whether each control-plane component should
establish Kubernetes watches cluster-wide or namespace-wide. If this
check occurs before the linkerd-proxy sidecar is ready, it fails, and
the control-plane component restarts.
This change configures each control-plane pod to skip outbound port 443
when injecting the proxy, allowing the control-plane to connect to
Kubernetes regardless of the `linkerd-proxy` state.
A longer-term fix should involve a more robust control-plane startup,
that is resilient to failed Kubernetes API requests. An even longer-term
fix could involve injecting `linkerd-proxy` as a Kubernetes "sidecar"
container, when that becomes available.
Workaround for #2407
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
As described in #2217, the controller returns TLS identities for results even
when the destination pod may not be able to participate in identity
requester: specifically, the other pod may not have the same controller
namespace or it may not be injected with identity.
This change introduces a new annotation, linkerd.io/identity-mode that is set
when injecting pods (via both CLI and webhook). This annotation is always
added.
The destination service now only returns TLS identities when this annotation
is set to optional on a pod and the destination pod uses the same controller.
These semantics are expected to change before the 2.3 release.
Fixes#2217
The control-plane components relied on a `--single-namespace` param,
passed from `linkerd install` into each individual component, to
determine which namespaces they were authorized to access, and whether
to support ServiceProfiles. This command-line flag was redundant given
the authorization rules encoded in the parent `linkerd install` output,
via [Cluster]Role[Binding]s.
Modify the control-plane components to query Kubernetes at startup to
determine which namespaces they are authorized to access, and whether
ServiceProfile support is available. This allows removal of the
`--single-namespace` flag on the components.
Also update `bin/test-cleanup` to cleanup the ServiceProfile CRD.
TODO:
- Remove `--single-namespace` flag on `linkerd install`, part of #2164
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Also, some protobuf updates:
* Rename `api_port` to match recent changes in CLI code.
* Remove the `cni` message because it won't be used.
* Remove `registry` field from proto types. This helps to avoid having to workaround edge cases like fully-qualified image name in different format, and overriding user-specified Linkerd version etc.
Signed-off-by: Ivan Sim <ivan@buoyant.io>
chart/templates/base.yaml is nearly 800 lines and contains the
kubernetes configurations for the marjority of the control plane.
Furthermore, its contents are not particularly organized (for example,
the prometheus RBAC bindings are in the middle of the controller's
configuration).
The size and complexity of this file makes it especially daunting to
introduce new functionality.
In order to make the situation easier to understand and change, this
splits base.yaml into several new template files: namespace, controller,
serviceprofile, and prometheus, and grafana. The `tls.yaml` template has
been renamed `ca.yaml`, since it installs the `linkerd-ca` resources.
This change also makes the comments uniform, adding a "header" to each
logical component.
Fixes#2154
Up until now, the proxy-api controller service has been the sole service
that the proxy communicates with, implementing the majoriry of the API
defined in the `linkerd2-proxy-api` repo. But this is about to change:
linkerd/linkerd2-proxy-api#25 introduces a new Identity service; and
this service must be served outside of the existing proxy-api service
in the linkerd-controller deployment (so that it may run under a
distinct service account).
With this change, the "proxy-api" name becomes less descriptive. It's no
longer "the service that serves the API for the proxy," it's "the
service that serves the Destination API to the proxy." Therefore, it
seems best to bite the bullet and rename this to be the "destination"
service (i.e. because it only serves the
`io.linkerd.proxy.destination.Destination` service).
Co-authored-by: Kevin Lingerfelt <kl@buoyant.io>
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Fixes#2077
When looking up service profiles, Linkerd always looks for the service profile objects in the Linkerd control namespace. This is limiting because service owners who wish to create service profiles may not have write access to the Linkerd control namespace.
Instead, we have the control plane look for the service profile in both the client namespace (as read from the proxy's `proxy_id` field from the GetProfiles request and from the service's namespace. If a service profile exists in both namespaces, the client namespace takes priority. In this way, clients may override the behavior dictated by the service.
Signed-off-by: Alex Leong <alex@buoyant.io>
The `linkerd check` command was doing limited validation on
ServiceProfiles.
Make ServiceProfile validation more complete, specifically validate:
- types of all fields
- presence of required fields
- presence of unknown fields
- recursive fields
Also move all validation code into a new `Validate` function in the
profiles package.
Validation of field types and required fields is handled via
`yaml.UnmarshalStrict` in the `Validate` function. This motivated
migrating from github.com/ghodss/yaml to a fork, sigs.k8s.io/yaml.
Fixes#2190
# Problem
In order to switch Linkerd template rendering to use `.yaml` files, static
assets must be bundled in the Go binary for use by `linkerd install`.
# Solution
The solution should not affect the local development process of building and
testing.
[vfsgen](https://github.com/shurcooL/vfsgen) generates Go code that statically
implements the provided `http.FileSystem`. Paired with `go generate` and Go
[build tags](https://golang.org/pkg/go/build/), we can continue to use the
template files on disk when developing with no change required.
In `!prod` Go builds, the `cli/static/templates.go` file provides a
`http.FileSystem` to the local templates. In `prod` Go builds, `go generate
./cli` generates `cli/static/generated_templates.gogen.go` that statically
provides the template files.
When built with `-tags prod`, the executable will be built with the staticlly
generated file instead of the local files.
# Validation
The binaries were compiled locally with `bin/docker-build`. The binaries were
then tested with `bin/test-run (pwd)/target/cli/darwin/linkerd`. All tests
passed.
No change was required to successfully run `bin/go-run cli install`. No change
was required to run `bin/linkerd install`.
Fixes#2153
Signed-off-by: Kevin Leimkuhler <kevin@kleimkuhler.com>
In linkerd/linkerd2-proxy#186, the proxy supports configuration of TCP
keepalive values.
This change sets `LINKERD2_PROXY_INBOUND_ACCEPT_KEEPALIVE` and
`LINKERD2_PROXY_OUTBOUND_CONNECT_KEEPALIVE` to 10s when injecting the
proxy, so that remote connections are configured with a keepalive.
This configuration is NOT yet exposed through the CLI. This may be done
in a followup, if necessary.
Fixes#1949
* Add pod spec annotation to disable injection in CLI and auto-injector
* Remove support for linkerd.io/auto-inject label entirely
* Update based on review feedback
* Fix issue with finding the namespace of deployments applied to the default ns
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Use `ca.NewCA()` for generating certs and keys for the proxy injector
- Remove from CA controller everything that dealt with the
webhook/proxy-injector
- Remove no longer needed proxy-injector volumes for 'trust-anchors' and
'webhook-secrets'
- Remove from the proxy-injector the retrieval of the trust anchor and
secrets
- tls flag during install is no longer needed for auto-inject to work
Fixes#2095 and fixes#2166
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Export RootOptions and BuildFirewallConfiguration so that the cni-plugin can use them.
* Created the cni-plugin based on istio-cni implementation
* Create skeleton files that need to be filled out.
* Create the install scripts and finish up plugin to write iptables
* Added in an integration test around the install_cni.sh and updated the script to handle the case where it isn't the only plugin. Removed the istio kubernetes.go file in favor of pkg/k8s; initial usage of this package; found and fixed the typo in the ClusterRole and ClusterRoleBinding; found the docker-build-cni-plugin script
* Corrected an incorrect name in the docker build file for cni-plugin
* Rename linkerd2-cni to linkerd-cni
* Fixup Dockerfile and clean up code a bit as well as logging statements.
* Update Gopkg.lock after master merge.
* Update test file to remove temporary tag.
* Fixed the command to run during the test while building up the docker run.
* Added attributions to applicable files; in the test file, use a different container for each test scenario and also print the docker logs to stdout when there is an error;
* Add the --no-init-container flag to install and inject. This flag will not output the initContainer and will add an annotation assuming that the cni will be used in this case.
* Update .travis.yml to build the cni-plugin docker image before running the tests.
* Workaround golint warnings.
* Create a new command to install the linkerd-cni plugin.
* Add the --no-init-container option to linkerd inject
* Use the setup ip tables annotation during the proxy auto inject webhook prevent/allow addition of an init container; move cni-plugin tests to the integration-test section of travis
* gate the cni-plugin tests with the -integration-tests flag; remove unnecessary deployment .yaml file.
* Incorporate PR Cleanup suggestions.
* Remove the SetupIPTablesLabel annotation and use config flags and the presence of the init container to determine whether the cni-plugin writes ip tables.
* Fix a logic bug in the cni-plugin code that prevented the iptables from being written; Address PR comments; make tests pass.
* Update go deps shas
* Changed the single file install-cni plugin filename to be .conf vs .conflist; Incorporated latest PR comments around spacing with the new renderer among others.
* Fix an issue with renaming .conf to .conflist when needed.
* Renamed some of the variables to try to make it more clear what is going on.
* Address final PR comments.
* Hide cni flags for the time being.
Signed-off-by: Cody Vandermyn <cody.vandermyn@nordstrom.com>
# Problem
In order to refactor `install` to allow for a more flexible configuration, we
should start with the format of the YAML that it renders. Using the Helm
YAML format will make it easier add flexible configuration options in the
future. Currently, the rendered template that `install` produces does not
follow this format.
# Solution
Use the internals that Helm itself uses to render an inject template that
follows the same formatting rules. Helm's `template` cmd provides a good
outline of what is needed to make Linkerd's `install` cmd work as if it was
a Chart.
# Validation
There are no new tests, but there may not be anything to test at this stage.
This is a WIP PR towards the ultimate goal of `install` allowing a more
flexible configuration.
However, `install` now uses all the Helm `template` internals and therefore
satisfies the needed properties for Helm Charts.
Signed-off-by: Kevin Leimkuhler <kevin@kleimkuhler.com>
This branch removes the `--proxy-bind-timeout` flag from the
`linkerd inject` and `linkerd install` CLI commands, and the
`LINKERD2_PROXY_BIND_TIMEOUT` environment variable from their output.
This is in preparation for removing that timeout from the proxy (as
described in #2013).
I thought it was prudent to remove this from the CLIs before removing it
from the proxy, so we can't create a situation where the CLIs produce
output that results in broken proxy containers.
Fixes#2013
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
DaemonSet stats are not currently shown in the cli stat command, web ui
or grafana dashboard. This commit adds daemonset support for stat.
Update stat command's help message to reference daemonsets.
Update the public-api to support stats for daemonsets.
Add tests for stat summary and api.
Add daemonset get/list/watch permissions to the linkerd-controller
cluster role that's created using the install command.
Update golden expectation test files for install command
yaml manifest output.
Update web UI with daemonsets
Update navigation, overview and pages to list daemonsets and the pods
associated to them.
Add daemonset paths to server, and ui apps.
Add grafana dashboard for daemonsets; a clone of the deployment
dashboard.
Update dependencies and dockerfile hashes
Add DaemonSet support to tap and top commands
Fixes of #2006
Signed-off-by: Zak Knill <zrjknill@gmail.com>
Version checks were not validating that the cli version matched the
control plane or data plane versions.
Add checks via the `linkerd check` command to validate the cli is
running the same version as the control and data plane.
Also add types around `channel-version` string parsing and matching. A
consequence being that during development `version.Version` changes from
`undefined` to `dev-undefined`.
Fixes#2076
Depends on linkerd/website#101
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Setup port-forwarding for linkerd dashboard command
* Output port-forward logs when --verbose flag is set
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Alejandro Pedraza
Alex Leong
Andrew Seigner
Ivan Sim
Douglas Jordan
Katerina
Alejandro Pedraza
Kevin Lingerfelt
Oliver Gould
Gaurav Kumar
Aditya Sharma
Tarun Pothulapati
Kevin Leimkuhler
Cody Vandermyn
Eliza Weisman
zak