* Moves Common templates needed to partials
As add-ons re-use the partials helm chart, all the templates needed by multiple charts should be present in partials
This commit also updates the helm tests
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
* add tracing add-on helm chart
Tracing sub-chart includes open-census and jaeger components as a sub-chart which can be enabled as needed
* Updated Install path to also install add-ons
This includes new interface for add-ons to implement, with example tracing implementation
* Updates Linkerd install path to also install add-ons
Changes include:
- Adds an optional Linkerd Values configmap which stores add-on configuration when add-ons are present.
- Updates Linkerd install path to check for add-ons and render their sub-charts.
- Adds a install Option called config, which is used to pass confiugration for add-ons.
- Uses a fork of mergo, to over-write default Values with the Values struct generated from config.
* Updates the upgrade path about add-ons.
Upgrade path now checks for the linkerd-values cm, and overwrites the default values with it, if present.
It then checks the config option, for any further overwrites
* Refactor linkerd-values and re-update tests
also adds relevant nil checks
* Refactor code to fix linting issues
* Fixes an error with linkerd-config global values
Also refactors the linkerd-values cm to work the same with helm
* Fix a nil pointer issue for tests
* Updated Tracing add-on chart meta-data
Also introduced a defaultGetFiles method for add-ons
* Add add-on/charts to gitignore
* refactor gitignore for chart deps
* Moves sub-charts to /charts directly
* Refactor linkerd values cm
* Add comment in linkerd-values
* remove extra controlplanetracing flag
* Support Stages deployment for add-ons along with tests
* linting fix
* update tracing rbac
* Removes the need for add-on Interface
- Uses helm loading capabiltiies to get info about add-ons
- Uses reflection to not have to unnecessarily add checks for each add-on type
* disable tracing flag
* Remove dep on forked mergo
- Re-use merge from helm
* Re-use helm's merge
* Override the chartDir path during tests
* add error check
* Updated the dependency iteration code
Currently, the charts directory, will not have the deps in the repo. So, Code is updated to read the dependencies from requirements.yaml
and use that info to read templates from the relevant add-ons directory.
* Hard Code add-ons name
* Remove struct details for add-ons
- As we don't use fields of a add-on struct, we don't have them to be typed. Instead we can just use the `enabled` flag using reflection
- Users can just use map[string]interface{} as the add-on type.
* update unit tests
* linting fix
* Rename flag to addon-config
* Use Chart loading logic
- This code uses chart loading to read the files and keep in a vfs.
- Once we have those files read we will then use them for generation of sub-charts.
* Go fmt fix
* Update the linkerd-values cm to use second level field
* Add relevant unit tests for mergeRaw
* linting fix
* Move addon tests to a new file
* Fix golden files
* remove addon install unit test
* Refactor sub-chart load logic
* Add install tracing unit test
* golden file update for tracing install
* Update golden files to reflect another pr changes
* Move addon-config flag to recordFlagSet
* add relevant tracing enabled checks
* linting fix
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
There was a problem that caused helm install to not reflect the proper list of ignored inbound and outbound ports. Namely if you supply just one port, that would not get reflected.
To reproduce do a:
```
helm install \
--name=linkerd2 \
--set-file global.identityTrustAnchorsPEM=ca.crt \
--set-file identity.issuer.tls.crtPEM=issuer.crt \
--set-file identity.issuer.tls.keyPEM=issuer.key \
--set identity.issuer.crtExpiry=2021-01-14T14:21:43Z \
--set-string global.proxyInit.ignoreInboundPorts="6666" \
linkerd-edge/linkerd2
```
Check your config:
```bash
$ kubectl get configmap -n linkerd -oyaml | grep ignoreInboundPort
"ignoreInboundPorts":[],
```
Signed-off-by: Zahari Dichev <zaharidichev@gmail.com>
There are a few dangling references to old release versions in our charts and readmes.
I've removed as many of these references as possible so that we no longer need to worry about them getting out of date. The one reference that remains is `cniPluginVersion` and this will need to be manually updated as part of the release process.
Signed-off-by: Alex Leong <alex@buoyant.io>
* update flags to smaller
* add tests for the same
* fix control plane trace flag
* add tests for controlplane tracing install
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
* Inject preStop hook into the proxy sidecar container to stop it last
This commit adds support for a Graceful Shutdown technique that is used
by some Kubernetes administrators while the more perspective
configuration is being discussed in
https://github.com/kubernetes/kubernetes/issues/65502
The problem is that RollingUpdate strategy does not guarantee that all
traffic will be sent to a new pod _before_ the previous pod is removed.
Kubernetes inside is an event-driven system and when a pod is being
terminating, several processes can receive the event simultaneously.
And if an Ingress Controller gets the event too late or processes it
slower than Kubernetes removes the pod from its Service, users requests
will continue flowing into the black whole.
According [to the documentation](https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods)
> 1. If one of the Pod’s containers has defined a `preStop` hook,
> it is invoked inside of the container. If the `preStop` hook is still
> running after the grace period expires, step 2 is then invoked with
> a small (2 second) extended grace period.
>
> 2. The container is sent the `TERM` signal. Note that not all
> containers in the Pod will receive the `TERM` signal at the same time
> and may each require a preStop hook if the order in which
> they shut down matters.
This commit adds support for the `preStop` hook that can be configured
in three forms:
1. As command line argument `--wait-before-exit-seconds` for
`linkerd inject` command.
2. As `linkerd2` Helm chart value `Proxy.WaitBeforeExitSeconds`.
2. As `config.alpha.linkerd.io/wait-before-exit-seconds` annotation.
If configured, it will add the following preHook to the proxy container
definition:
```yaml
lifecycle:
preStop:
exec:
command:
- /bin/bash
- -c
- sleep {{.Values.Proxy.WaitBeforeExitSeconds}}
```
To achieve max benefit from the option, the main container should have
its own `preStop` hook with the `sleep` command inside which has
a smaller period than is set for the proxy sidecar. And none of them
must be bigger than `terminationGracePeriodSeconds` configured for the
entire pod.
An example of a rendered Kubernetes resource where
`.Values.Proxy.WaitBeforeExitSeconds` is equal to `40`:
```yaml
# application container
lifecycle:
preStop:
exec:
command:
- /bin/bash
- -c
- sleep 20
# linkerd-proxy container
lifecycle:
preStop:
exec:
command:
- /bin/bash
- -c
- sleep 40
terminationGracePeriodSeconds: 160 # for entire pod
```
Fixes#3747
Signed-off-by: Eugene Glotov <kivagant@gmail.com>
* Pods with non empty securitycontext capabilities fail to be injected
Followup to #3744
The `_capabilities.tpl` template got its variables scope changed in
`Values.Proxy`, which caused inject to fail when security context
capabilities were detected.
Discovered when testing injecting the nginx ingress controller.
* Re-add the destination container to the controller spec
This fix is necessary to avoid data plane downtime during an upgrade to
stable-2.6. All existing older proxies will continue to send requests to
this destination container, until the data plane is restarted.
On restart, the new pods will start forwarding their requests to the new
linkerd-dst service.
* Use the 2.6 destination service fqdn
* Fixed unit tests
* Fix integration test failure
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Add the tracing environment variables to the proxy spec
* Add tracing event
* Remove unnecessary CLI change
* Update log message
* Handle single segment service name
* Use default service account if not provided
The injector doesn't read the defaults from the values.yaml
* Remove references to conf.workload.ownerRef in log messages
This nested field isn't always set.
Signed-off-by: Ivan Sim <ivan@buoyant.io>
This reverts commit edd3b1f6d4.
This is a temporary revert of #3461 while we sort out some details of how this should configured and how it should interact with configuring a trace collector on the Linkerd proxy. We will reintroduce this change once the config plan is straightened out.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Delete symlink to old Helm chart
* Update 'install' code to use common Helm template structs
* Remove obsolete TLS assets functions.
These are now handle by Helm functions inside the templates
* Read defaults from values.yaml and values-ha.yaml
* Ensure that webhooks TLS assets are retained during upgrade
* Fix a few bugs in the Helm templates (see bullet points):
* Merge the way the 'install' ha and non-ha options are handled into one function
* Honor the 'NoInitContainer' option in the components templates
* Control plane mTLS will not be disabled if identity context in the
config map is empty. The data plane mTLS will still be automatically disabled
if the context is nil.
* Resolve test failures from rebase with master
* Fix linter issues
* Set service account mount path read-only field
* Add TLS variables of the webhooks and tap to values.yaml
During upgrade, these secrets are preserved to ensure they remain synced
wih the CA bundle in the webhook configurations. These Helm variables are used
to override the defaults in the templates.
* Remove obsolete 'chart' folder
* Fix bugs in templates
* Handle missing webhooks and tap TLS assets during upgrade
When upgrading from an older version that don't have these secrets, fallback to let Helm
create them by creating an empty charts.TLS struct.
* Revert the selector labels of webhooks to be compatible with that in 2.4
In 2.4, the proxy injector and profile validator webhooks already have their selector labels defined.
Since these attributes are immutable, the recent change to these selectors introduced by the Helm chart work will cause upgrade to fail.
* Alejandro's feedback
* Siggy's feedback
* Removed redundant unexported custom types
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Refactor proxy injection to use Helm charts
Fixes#3128
A new chart `/charts/patch` was created, that generates the JSON patch
payload that is to be returned to the k8s API when doing the injection
through the proxy injector, and it's also leveraged by the `linkerd
inject --manual` CLI.
The VFS was used by `linkerd install` to access the old chart under
`/chart`. Now the proxy injection also uses the Helm charts to generate
the JSON patch (see above) so we've moved the VFS from `cli/static` to a
new common place under `/pkg/charts/static`, and the new root for the VFS is
now `/charts`.
`linkerd install` hasn't yet migrated to use the new charts (that'll
happen in #3127), so the only change in that regard was the creation of
`/charts/chart` which is a symlink pointing to `/chart` that
`install.go` now uses, so that the VFS contains both the old and new
charts, as a temporary measure.
You can see that `/bin/Dockerfile-bin`, `/controller/Dockerfile` and
`/bin/build-cli-bin` do now `go generate` pointing to the new location
(and the `go generate` annotation was moved from `/cli/main.go` to
`pkg/charts/static/templates.go`).
The symlink trick doesn't work when building the binaries through
Docker, so `/bin/Dockerfile-bin` replaces the symlink with an actual
copy of `/chart`.
Also note that in `/controller/Dockerfile` we now need to include the
`prod` tag in `go install` like we do in `/bin/Dockerfile-bin` so that
the proxy injector does use the VFS instead of the local file system.
- The common logic to parse a chart has been moved from `install.go` to
`/pkg/charts/util.go`.
- The special ENV var in the proxy for "outbound router capacity" that
only applies to the Prometheus pod is now handled directly in the proxy
partial and all the associated go code could be removed.
- The `patch.go` lib for generating the JSON patch in go along
with its tests `patch_test.go` are no longer needed.
- Lots of functions in `/pkg/inject/inject.go` got removed/simplified
with their logic being moved into the charts themselves. As a
consequence lots of things in `inject_test.go` became irrelevant.
- Moved `template-values.go` from `/pkg/inject` to `pkg/charts` as that
contains the go structs representation of the chart variables that
will be leveraged in #3127.
Don't forget to run `/bin/helm.sh` whenever you make changes to charts
;-)
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Updated controller template with proxy partials
* Declare dependency in requirements.yaml
* Add partial template for proxy's metadata
* Add proxy-init partial template
* Script to lint Helm charts and update their dependencies
* Update partials chart Chart.yaml
* Add proxy-init and resource partial templates
* Replace hard coded namespace variable in proxy env var
* Ignore chart dependencies .tgz files
* Add missing fields and re-order YAML elements to match CLI output
* Reuse control plane's resource partial template in 'partials' chart
* Set the proxy's destination service address env var
* Add Grafana's template
* Update api version of controller RBAC
* Add Heartbeat template
* Remove duplicated resources partial template
* Add remainder control plane components templates
* Add template for the 'linkerd-config' config map
* Add debug container template
* Update proxy partial with 'disable-identity' and 'disable-tap' variables
Note that these are inject-only variables.
Also added the LINKERD2_PROXY_TAP_SVC_NAME env var.
* Add validation conditions to ensure identity and tap aren't disabled for
control plane components
* Add partials for service account token mount path and security context capabilities
* Change proxy and proxy-init templates to use global scope
Some of the nested variables are removed from values.yaml to ensure changes
made to root-level variables are propagated directly into the partial
templates. The previous approach of using YAML anchors in the
values.yaml to share common values can get out-of-sync when values are
changed via the Helm's `--set` option.
* Update templates and values file to match #3161
* Perform a dry run installation if there is a local Tiller
* Reorder JSON elements in linkerd-config
* Re-adjust nested partials indentation to work with inject 'patch' chart
Previously, the partials will render their content as an element in the list.
While it works for installation, the toJson function in the 'inject' patch code
ends up converting it into a JSON list, instead of the expected JSON
object.
* Trap the last fail command in the Helm shell script
* Add the identity trust anchor
* Address Thomas' feedback on handling HA
All the HA-related variables are moved to values-ha.yaml
* Convert ignore ports string to JSON list in linkerd-config
Also fixed some indentation issues.
* Add values-ha.yaml
* Include the service account token mount path only if identity is enabled
* Fixed malformed JSON in linkerd-config config map
* Rename chart to 'linkerd2'
* Add NOTES.txt
* Fix incorrect variable path in proxy template
* Remove fake TLS assets
* Add 'required' constraint to identity trust anchors variable
* Update tap templates per #3167
* Bump default version to edge-19.8.1 due to dependency on RSA support
Signed-off-by: Ivan Sim <ivan@buoyant.io>
Tarun Pothulapati
Zahari Dichev
Alex Leong
Eugene Glotov
Alejandro Pedraza
Paul Balogh
Ivan Sim
arminbuerkle