* Add identity-issuer-certificate-file and identity-issuer-key-file to upgrade command
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
* Implement logic to use identity-trust-anchors-file flag to update the anchors
Signed-off-by: Zahari Dichev <zaharidichev@gmail.com>
* Address remarks
Signed-off-by: Zahari Dichev <zaharidichev@gmail.com>
* No need for `processYAML()` in `install`
Since `install` uses helm to do its proxy injection, there's no need to
call `processYAML`. This also fixes an issue discovered in #3687 where
we started supporting injection of cronjobs, and even though `linkerd`'s
namespace is flagged to skip automatic injection it was being injected.
This replaces #3773 as it's a much more simpler approach.
* Replaced `uuid` with `uid` from linkerd-config resource
Fixes#3621
Removed the old `uuid` for identifying linkerd installations, and
replaced it with the `uid` property from the `linkerd-config` ConfigMap.
I tested that this `uid` remains the same by updating the config and
also upgrading linkerd, using both the CLI and Helm.
Note that this required granting `linkerd-web` RBAC access to the
`linkerd-config` Config.
I also added an integration test to verify the stability of the uid.
`linkerd check` can now be run from the dashboard in the `/controlplane` view.
Once the check results are received, they are displayed in a modal in a similar
style to the CLI output.
Closes#3613
* Add support for --identity-issuer-mode flag to install cmd
* Change flag to be a bool
* Read correct data form identity when external issuer is used
* Add ability for identity service to dynamically reload certs
* Fix failing tests
* Minor refactor
* Load trust anchors from identity issuer secret
* Make identity service actually watch for issuer certs updates
* Add some testing around cmd line identity options validation
* Add tests ensuring that identity service loads issuer
* Take into account external-issuer flag during upgrade + tests
* Fix failing upgrade test
* Address initial review feedback
* Address further review feedback on cli and helm
* Do not persist --identity-external-issuer
* Some improvements to identitiy service
* Bring back persistane of external issuer flag
* Address more feedback
* Update dockerfiles shas
* Publishing k8s events on issuer certs rotation
* Ensure --ignore-cluster+external issuer is not supported
* Update go-deps shas
* Transition to identity issuer scheme based configuration
* Use k8s consts for secret file names
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
The `linkerd install` `--ignore-cluster` and `--skip-checks` flags
enable generating install manifests without a connection to a k8s
cluster. Unfortunately these flags were only checked after attempted
connections to a k8s cluster were made. This satisfied the use case of
`linkerd install` "ignoring" the state of the cluster, but for
environments not connected to a cluster, the user would have to wait for
30s timeouts before getting the manifests.
Modify `linkerd install` and its subcommands to pre-emptively check for
`--ignore-cluster` and `--skip-checks`. This decreases `linkerd install
--ignore-cluster` from ~30s to ~1s, and `linkerd install control-plane
--ignore-cluster --skip-checks` from ~60s to ~1s.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
This PR aims at preventing `--cluster-domain` from being changed during `linkerd upgrade`. I am not sure this is all that is necessary, but it can probably be at least a good start. 🙂Closes#3454.
Signed-off-by: Bruno Miguel Custódio <brunomcustodio@gmail.com>
This reverts commit edd3b1f6d4.
This is a temporary revert of #3461 while we sort out some details of how this should configured and how it should interact with configuring a trace collector on the Linkerd proxy. We will reintroduce this change once the config plan is straightened out.
Signed-off-by: Alex Leong <alex@buoyant.io>
Fixes#278
Add `linkerd install|upgrade --disable-heartbeat` flag, and have
`linkerd check` check for the heartbeat's SA only if it's enabled.
Also added those flags into the `linkerd upgrade -h` examples.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Rename template-values.go
* Define new constructor of charts.Values type
* Move all Helm values related code to the pkg/charts package
* Bump dependency
* Use '/' in filepath to remain compatible with VFS requirement
* Add unit test to verify Helm YAML output
* Alejandro's feedback
* Add unit test for Helm YAML validation (HA)
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Always use forward-slash when interacting with the VFS
Fixes#3283
Our VFS implementation relies on `net.http.FileSystem` which always
expects `/` regardless of the OS.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
PR #3217 re-introduced container metrics collection to
linkerd-prometheus. This enabled linkerd-heartbeat to collect mem and
cpu metrics at the container-level.
Add container cpu and mem metrics to heartbeat requests. For each of
(destination, prometheus, linkerd-proxy), collect maximum memory and p95
cpu.
Concretely, this introduces 7 new query params to heartbeat requests:
- p99-handle-us
- max-mem-linkerd-proxy
- max-mem-destination
- max-mem-prometheus
- p95-cpu-linkerd-proxy
- p95-cpu-destination
- p95-cpu-prometheus
Part of #2961
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Delete symlink to old Helm chart
* Update 'install' code to use common Helm template structs
* Remove obsolete TLS assets functions.
These are now handle by Helm functions inside the templates
* Read defaults from values.yaml and values-ha.yaml
* Ensure that webhooks TLS assets are retained during upgrade
* Fix a few bugs in the Helm templates (see bullet points):
* Merge the way the 'install' ha and non-ha options are handled into one function
* Honor the 'NoInitContainer' option in the components templates
* Control plane mTLS will not be disabled if identity context in the
config map is empty. The data plane mTLS will still be automatically disabled
if the context is nil.
* Resolve test failures from rebase with master
* Fix linter issues
* Set service account mount path read-only field
* Add TLS variables of the webhooks and tap to values.yaml
During upgrade, these secrets are preserved to ensure they remain synced
wih the CA bundle in the webhook configurations. These Helm variables are used
to override the defaults in the templates.
* Remove obsolete 'chart' folder
* Fix bugs in templates
* Handle missing webhooks and tap TLS assets during upgrade
When upgrading from an older version that don't have these secrets, fallback to let Helm
create them by creating an empty charts.TLS struct.
* Revert the selector labels of webhooks to be compatible with that in 2.4
In 2.4, the proxy injector and profile validator webhooks already have their selector labels defined.
Since these attributes are immutable, the recent change to these selectors introduced by the Helm chart work will cause upgrade to fail.
* Alejandro's feedback
* Siggy's feedback
* Removed redundant unexported custom types
Signed-off-by: Ivan Sim <ivan@buoyant.io>
The web dashboard will be migrating to the new Tap APIService, which
requires RBAC privileges to access.
Introduce a new ClusterRole, `linkerd-linkerd-tap-admin`, which gives
cluster-wide tap privileges. Also introduce a new ClusterRoleBinding,
`linkerd-linkerd-web-admin` which binds the `linkerd-web` service
account to the new tap ClusterRole. This ClusterRoleBinding is enabled
by default, but may be disabled via a new `linkerd install` flag
`--restrict-dashboard-privileges`.
Fixes#3177
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Refactor proxy injection to use Helm charts
Fixes#3128
A new chart `/charts/patch` was created, that generates the JSON patch
payload that is to be returned to the k8s API when doing the injection
through the proxy injector, and it's also leveraged by the `linkerd
inject --manual` CLI.
The VFS was used by `linkerd install` to access the old chart under
`/chart`. Now the proxy injection also uses the Helm charts to generate
the JSON patch (see above) so we've moved the VFS from `cli/static` to a
new common place under `/pkg/charts/static`, and the new root for the VFS is
now `/charts`.
`linkerd install` hasn't yet migrated to use the new charts (that'll
happen in #3127), so the only change in that regard was the creation of
`/charts/chart` which is a symlink pointing to `/chart` that
`install.go` now uses, so that the VFS contains both the old and new
charts, as a temporary measure.
You can see that `/bin/Dockerfile-bin`, `/controller/Dockerfile` and
`/bin/build-cli-bin` do now `go generate` pointing to the new location
(and the `go generate` annotation was moved from `/cli/main.go` to
`pkg/charts/static/templates.go`).
The symlink trick doesn't work when building the binaries through
Docker, so `/bin/Dockerfile-bin` replaces the symlink with an actual
copy of `/chart`.
Also note that in `/controller/Dockerfile` we now need to include the
`prod` tag in `go install` like we do in `/bin/Dockerfile-bin` so that
the proxy injector does use the VFS instead of the local file system.
- The common logic to parse a chart has been moved from `install.go` to
`/pkg/charts/util.go`.
- The special ENV var in the proxy for "outbound router capacity" that
only applies to the Prometheus pod is now handled directly in the proxy
partial and all the associated go code could be removed.
- The `patch.go` lib for generating the JSON patch in go along
with its tests `patch_test.go` are no longer needed.
- Lots of functions in `/pkg/inject/inject.go` got removed/simplified
with their logic being moved into the charts themselves. As a
consequence lots of things in `inject_test.go` became irrelevant.
- Moved `template-values.go` from `/pkg/inject` to `pkg/charts` as that
contains the go structs representation of the chart variables that
will be leveraged in #3127.
Don't forget to run `/bin/helm.sh` whenever you make changes to charts
;-)
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
The Tap Service enabled tapping of any meshed pod, regardless of user
privilege.
This change introduces a new Tap APIService. Kubernetes provides
authentication and authorization of Tap requests, and then forwards
requests to a new Tap APIServer, which implements a Kubernetes
aggregated APIServer. The Tap APIServer authenticates the client TLS
from Kubernetes, and authorizes the user via a SubjectAccessReview.
This change also modifies the `linkerd tap` command to make requests
against the new APIService.
The Tap APIService implements these Kubernetes-style endpoints:
POST /apis/tap.linkerd.io/v1alpha1/watch/namespaces/:ns/tap
POST /apis/tap.linkerd.io/v1alpha1/watch/namespaces/:ns/:res/:name/tap
GET /apis
GET /apis/tap.linkerd.io
GET /apis/tap.linkerd.io/v1alpha1
GET /healthz
GET /healthz/log
GET /healthz/ping
GET /metrics
GET /openapi/v2
GET /version
Users authorize to the new `tap.linkerd.io/v1alpha1` via RBAC. Only the
`watch` verb is supported. Access is also available via subresources
such as `deployments/tap` and `pods/tap`.
This change introduces the following resources into the default Linkerd
install:
- Global
- APIService/v1alpha1.tap.linkerd.io
- ClusterRoleBinding/linkerd-linkerd-tap-auth-delegator
- `linkerd` namespace:
- Secret/linkerd-tap-tls
- `kube-system` namespace:
- RoleBinding/linkerd-linkerd-tap-auth-reader
Tasks not covered by this PR:
- `linkerd top`
- `linkerd dashboard`
- `linkerd profile --tap`
- removal of the unauthenticated tap controller
Fixes#2725, #3162, #3172
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Similar to `kubectl --as`, global flag across all linkerd subcommands
which sets a `ImpersonationConfig` in the Kubernetes API config.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* increased ha resource limits
* added resource limits to proxy when HA
* update golden files in cmd/main
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
`linkerd check`, the web dashboard, and Grafana all perform version
checks to validate Linkerd is up to date. It's common for users to
seldom execute these codepaths. This makes it difficult to identify what
versions of Linkerd are currently in use and what environments it is
being run in, which helps prioritize testing and backports.
Introduce a `heartbeat` CronJob to the default Linkerd install. The
cronjob executes every 24 hours, starting from 5 minutes after
`linkerd install` is run.
Example check URL:
https://versioncheck.linkerd.io/version.json?
install-time=1562761177&
k8s-version=v1.15.0&
meshed-pods=8&
rps=3&
source=heartbeat&
uuid=cc4bb700-3314-426a-9f0f-ec588b9df020&
version=git-b97ee9f7
Fixes#2961
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Allow custom cluster domain in destination watcher
The change relaxes the constrains of an authority requiring a
`svc.cluster.local` suffix to only require `svc` as third part.
A unit test could be added though the destination/server and endpoint
watcher already test this behaviour.
* Update proto to allow setting custom cluster domain
Update golden templates
* Allow setting custom domain in grpc, web server
* Remove cluster domain flags from web srv and public api
* Set defaultClusterDomain in validateAndBuild if none is set
Signed-off-by: Armin Buerkle <armin.buerkle@alfatraining.de>
* Added Anti Affinity when HA is configured
* Move check to validate()
* Test output with anti-affinity when ha upgrade
* Add anti-affinity to identity deployment
* made host anti-affinity default when ha
* Define affinity template in a separate file
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
The existing `linkerd install` error message for existing resources was
shared with `linkerd check`. Given the different contexts, the messaging
made more sense for `linkerd check` than for `linkerd install`.
Modify the error messaging for `linkerd install` to print a bare list
of existing resources, and provide instructions for proceeding.
For example:
```bash
$ linkerd install
Unable to install the Linkerd control plane. It appears that there is an existing installation:
clusterrole.rbac.authorization.k8s.io/linkerd-linkerd-controller
clusterrole.rbac.authorization.k8s.io/linkerd-linkerd-identity
If you are sure you'd like to have a fresh install, remove these resources with:
linkerd install --ignore-cluster | kubectl delete -f -
Otherwise, you can use the --ignore-cluster flag to overwrite the existing global resources.
```
Fixes#3045
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
PR #2603 modified the web process to read the UUID from the
`linkerd-config` ConfigMap rather than from a command line flag. The
`linkerd check` command relied on that command line flag to retrieve the
UUID as part of its version check.
Modify `linkerd check` to correctly retrieve the UUID from
`linkerd-config`. Also refactor `linkerd-config` retrieval and parsing
code to be shared between healthcheck, install, and upgrade.
Relates to #2961
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
This change implements the DstOverrides feature of the destination profile API (aka traffic splitting).
We add a TrafficSplitWatcher to the destination service which watches for TrafficSplit resources and notifies subscribers about TrafficSplits for services that they are subscribed to. A new TrafficSplitAdaptor then merges the TrafficSplit logic into the DstOverrides field of the destination profile.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Introduce new checks to determine existence of global resources and the
'linkerd-config' config map.
* Update pre-check to check for existence of global resources
This ensures that multiple control planes can't be installed into
different namespaces.
* Update integration test clean-up script to delete psp and crd
Signed-off-by: Ivan Sim <ivan@buoyant.io>
Fixes#2927
Also moved `TestInstallSP` after `TestCheckPostInstall` so we're sure
the validating webhook is ready before installing a service profile.
Signed-off-by: Alejandro Pedraza Borrero <alejandro@buoyant.io>
* Add control plane and CNI PSP and RBAC resources
* Add the '--linkerd-cni-enabled' flag to the multi-stage install subcommands
This flag ensures that the NET_ADMIN capability is omitted from the control
plane's PSP during 'install config' and the proxy-init containers aren't
injected during 'install control-plane'.
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* If HA, set the webhooks failure policy to 'Fail'
I'm adding to the linkerd namespace a new label
`linkerd.io/is-control-plane: true` that is used in the webhook configs'
selector to skip the proxy injector for this namespace. This avoids
running into the timing issues described in #2852.
Fixes#2852
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Fix HA during upgrade
If we have a Linkerd installation with HA, and then we do `linkerd
upgrade` without specifying `--ha`, the replicas will get set back to 1,
yet the resource requests will keep their HA values.
Desired behavior: `linkerd install --ha` adds the `ha` value into the
linkerd-config, so it should be used during upgrade even if `--ha` is
not passed to `linkerd upgrade`.
Note we still can do `linkerd upgrade --ha=false` to disable HA.
This is a prerequesite to address #2852
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Split proxy-init into separate repo
Fixes#2563
The new repo is https://github.com/linkerd/linkerd2-proxy-init, and I
tagged the latest there `v1.0.0`.
Here, I've removed the `/proxy-init` dir and pinned the injected
proxy-init version to `v1.0.0` in the injector code and tests.
`/cni-plugin` depends on proxy-init, so I updated the import paths
there, and could verify CNI is still working (there is some flakiness
but unrelated to this PR).
For consistency, I added a `--init-image-version` flag to `linkerd
inject` along with its corresponding override config annotation.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Update helm charts to include webhooks config and TLS secret
* Update the webhooks to read the secret cert and key
* Update webhooks to not recreate config on restart
* Ensure upgrade preserve existing secrets
* Revert the change to rename the webhook configs
The renaming change breaks upgrade, where the new webhook configs conflict with
the existing ones. The older resources aren't deleted during upgrade because
they are dynamically created.
* Make the secret volume read-only
* Remove unnecessary exported getter functions
* Remove obsolete mwc and vwc templates
Signed-off-by: Ivan Sim <ivan@buoyant.io>
The multi-stage args used by install, upgrade, and check were
implemented as positional arguments to their respective parent commands.
This made the help documentation unclear, and the code ambiguous as to
which flags corresponded to which stage.
Define `config` and `control-plane` stages as subcommands. The help
menus now explicitly state flags supported.
Fixes#2729
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
All ServiceAccounts are intended to be grouped together with other RBAC
resources, particularly for `linkerd install config` output. Grafana and
Web ServiceAccounts were still included with their respective
Deployments.
Group Grafana and Web ServiceAccounts with other RBAC resources.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Zahari Dichev
Alejandro Pedraza
Sergio C. Arteaga
Tarun Pothulapati
Andrew Seigner
Bruno M. Custódio
Alex Leong
arminbuerkle
Alena Varkockova
Ivan Sim
cpretzer
Andrew Seigner
Dan
Dennis Adjei-Baah