* Add the tracing environment variables to the proxy spec
* Add tracing event
* Remove unnecessary CLI change
* Update log message
* Handle single segment service name
* Use default service account if not provided
The injector doesn't read the defaults from the values.yaml
* Remove references to conf.workload.ownerRef in log messages
This nested field isn't always set.
Signed-off-by: Ivan Sim <ivan@buoyant.io>
This reverts commit edd3b1f6d4.
This is a temporary revert of #3461 while we sort out some details of how this should configured and how it should interact with configuring a trace collector on the Linkerd proxy. We will reintroduce this change once the config plan is straightened out.
Signed-off-by: Alex Leong <alex@buoyant.io>
* make identity use grpc server with prom metrics
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
* linting fix
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
* Fix injector timeout under high load
Fixes#3358
When retrieving a pod owner, we were hitting the k8s API directly because
at injection time the informer might not have been informed about the
existence of the parent object.
Under a large number of injection requests this ended up in the k8s API requests
being throttled, the proxy-injector getting blocked and the webhook requests
timing out.
Now we'll hit the shared informer first, and hit the k8s API only when
the informer doesn't return anything. After a few injection requests for
the same owner, the informer should have been updated.
Testing:
Scaling an emoji deployment to 1000 replicas, and after waiting for a
couple of minutes:
Before:
```bash
# a portion of the pods doesn't get injected
$ kubectl-n emojivoto get po | grep ./1 | wc -l
109
kubectl -n kube-system logs -f kube-apiserver-minikube | grep
failing.*timeout
.... (lots of errors)
```
After:
```bash
# all the pods get injected
$ kubectl -n emojivoto get po | grep ./1 | wc -l
0
kubectl -n kube-system logs -f kube-apiserver-minikube | grep
failing.*timeout
```
The repo depended on an old version of client-go. It also depended on
stern, which itself depended on an old version of client-go, making
client-go upgrade non-trivial.
Update the repo to client-go v12.0.0, and also replace stern with a
fork.
This fork of stern includes the following changes:
- updated to use Go Modules
- updated to use client-go v12.0.0
- fixed log line interleaving:
- https://github.com/wercker/stern/issues/96
- based on:
- 8723308e46Fixes#3382
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The controller Docker image included 7 Go binaries (destination,
heartbeat, identity, proxy-injector, public-api, sp-validator, tap),
each roughly 35MB, with similar dependencies.
Change each controller binary into subcommands of a single `controller`
binary, decreasing the controller Docker image size from 315MB to 38MB.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Fixes#3356
1.16 removes some api groups that were already deprecated. From k8s blog
post (https://kubernetes.io/blog/2019/07/18/api-deprecations-in-1-16/):
```
- PodSecurityPolicy: will no longer be served from extensions/v1beta1 in
v1.16.
Migrate to the policy/v1beta1 API, available since v1.10. Existing
persisted data can be retrieved/updated via the policy/v1beta1 API.
- DaemonSet, Deployment, StatefulSet, and ReplicaSet: will no longer be
served from extensions/v1beta1, apps/v1beta1, or apps/v1beta2 in v1.16.
Migrate to the apps/v1 API, available since v1.9. Existing persisted
data can be retrieved/updated via the apps/v1 API.
```
Previous PRs had already made this change at the Helm templates level,
but we still needed to do it at the API calls and tests.
The integration tests ran fine for k8s 1.12 and 1.15. They fail on 1.16
because the upgrade integration test tries to install linkerd 2.5 which is not
compatible with 1.16.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
The repo depended on a (recently broken) thrift package:
```
github.com/linkerd/linkerd2
-> contrib.go.opencensus.io/exporter/ocagent@v0.2.0
-> go.opencensus.io@v0.17.0
-> git.apache.org/thrift.git@v0.0.0-20180902110319-2566ecd5d999
```
... via this line in `controller/k8s`:
```go
_ "k8s.io/client-go/plugin/pkg/client/auth"
```
...which created a dependency on go.opencensus.io:
```bash
$ go mod why go.opencensus.io
...
github.com/linkerd/linkerd2/controller/k8s
k8s.io/client-go/plugin/pkg/client/auth
k8s.io/client-go/plugin/pkg/client/auth/azure
github.com/Azure/go-autorest/autorest
github.com/Azure/go-autorest/tracing
contrib.go.opencensus.io/exporter/ocagent
go.opencensus.io
```
Bump contrib.go.opencensus.io/exporter/ocagent from `v0.2.0` to
`v0.6.0`, creating this new dependency chain:
```
github.com/linkerd/linkerd2
-> contrib.go.opencensus.io/exporter/ocagent@v0.6.0
-> google.golang.org/api@v0.7.0
-> go.opencensus.io@v0.21.0
```
Bumping our go.opencensus.io dependency from `v0.17.0` to `v0.21.0`
pulls in this commit:
ed3a3f0bf0 (diff-37aff102a57d3d7b797f152915a6dc16)
...which removes our dependency on github.com/apache/thrift
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Avoid the dashboard requesting stats when not needed
Create an alternative to `urlsForResource` called
`urlsForResourceNoStats` that makes use of the `skip_stats` parameter in
the stats API (created in #1871) that doesn't query Prometheus when not needed.
When testing using the dashboard looking at the linkerd namespace,
queries per second went down from 2874 to 2756, a 4% decrease.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Fix auto-injecting pods and integration tests reporting
When creating an Event when auto-injection occurs (#3316) we try to
fetch the parent object to associate the event to it. If the parent
doesn't exist (like in the case of stand-alone pods) the event isn't
created. I had missed dealing with one part where that parent was
expected.
This also adds a new integration test that I verified fails before this
fix.
Finally, I removed from `_test-run.sh` some `|| exit_code=$?` that was
preventing the whole suite to report failure whenever one of the tests
in `/tests` failed.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Set custom cluster domain in GetServiceProfileFor
* Set custom cluster domain in tap server
Move fetching cluster domain for tap server to cmd main
* Handle fetchting cluster domain errors separately
* Use custom cluster domain for traffic split adaptor
Signed-off-by: Armin Buerkle <armin.buerkle@alfatraining.de>
* Have the proxy-injector emit events upon injection/skipping injection
Fixes#3253
Have the proxy-injector emit an event whenever a injection happens, or
when injection is skipped for some reason (also added that reason into
the proxy-injector logs). The level is associated to the parent workload
(it can't be associated to the pod because at this point the pod hasn't
been persisted).
The event recorder was setup at the `webhook/server.go` level and passed
to the proxy-injector's `Inject` function. The sp-validator thus also
has access to the event recorder, but for now it's not using it.
Related changes:
- Refactored `api.GetOwnerKindAndName()` to have it return a more
generic object.
- Refactored `report.Injectable()` to also have it return the reason why
a workload is not injectable.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Fixes#3052.
Adds a unit test for the edges API endpoint. To maintain a consistent order for
testing, the returned rows in api/public/edges.go are now sorted.
In preparation for #3242, the destination controller will need to
support a broader set of valid authorities including IP addresses.
This change modifies the destination controller's authority-parsing code
so that the is-this-a-kubernete-service-name decision is decoupled from
parsing of authorities into their consituent parts.
The `Get` API now explicitly handles IP address names, though it
currently fails all such resolutions.
* Rename template-values.go
* Define new constructor of charts.Values type
* Move all Helm values related code to the pkg/charts package
* Bump dependency
* Use '/' in filepath to remain compatible with VFS requirement
* Add unit test to verify Helm YAML output
* Alejandro's feedback
* Add unit test for Helm YAML validation (HA)
Signed-off-by: Ivan Sim <ivan@buoyant.io>
### Summary
As an initial attempt to secure the connection from clients to the gRPC tap
server on the tap Pod, the tap `addr` only listened on localhost.
As @adleong pointed out #3257, this was not actually secure because the inbound
proxy would establish a connection to localhost anyways.
This change removes the gRPC tap server listener and changes `TapByResource`
requests to interface with the server object directly.
From this, we know that all `TapByResourceRequests` have gone through the tap
APIServer and thus authorized by RBAC.
### Details
[NewAPIServer](ef90e0184f/controller/tap/apiserver.go (L25-L26)) now takes a [GRPCTapServer](f6362dfa80/controller/tap/server.go (L33-L34)) instead of a `pb.TapClient` so that
`TapByResource` requests can interact directly with the [TapByResource](f6362dfa80/controller/tap/server.go (L49-L50)) method.
`GRPCTapServer.TapByResource` now makes a private [grpcTapServer](ef90e0184f/controller/tap/handlers.go (L373-L374)) that satisfies
the [tap.TapServer](https://godoc.org/github.com/linkerd/linkerd2/controller/gen/controller/tap#TapServer) interface. Because this interface is satisfied, we can interact
with the tap server methods without spawning an additional listener.
Signed-off-by: Kevin Leimkuhler <kleimkuhler@icloud.com>
This PR adds a test for trafficsplits to stat_summary_test.go.
Because the test requires a consistent order for returned rows, trafficsplit
rows in stat_summary.go are now sorted by apex + leaf name before being
returned.
### Summary
After the addition of the tap APIServer, all the logic related to tap in the public API no longer needs to be there. The servers and clients that are created but not used, as well as all the old testing infrastrucure related to tap can be removed.
This deprecates TapByResource and therefore required an update to the protobuf files with `bin/protoc-go.sh`. While the change to deprecate this method was extremely small, a lot of protobuf fils were updated in the process. These changes to the code and protobuf files should probably remain coupled since `TapByResource` is officially deprecated in the public API, but a majority of the additions/deletions are related to those files.
This draft passes `go test` as well as a local run of the integration tests.
Signed-off-by: Kevin Leimkuhler <kleimkuhler@icloud.com>
PR #3217 re-introduced container metrics collection to
linkerd-prometheus. This enabled linkerd-heartbeat to collect mem and
cpu metrics at the container-level.
Add container cpu and mem metrics to heartbeat requests. For each of
(destination, prometheus, linkerd-proxy), collect maximum memory and p95
cpu.
Concretely, this introduces 7 new query params to heartbeat requests:
- p99-handle-us
- max-mem-linkerd-proxy
- max-mem-destination
- max-mem-prometheus
- p95-cpu-linkerd-proxy
- p95-cpu-destination
- p95-cpu-prometheus
Part of #2961
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
This PR adds `trafficsplit` as a supported resource for the `linkerd stat` command. Users can type `linkerd stat ts` to see the apex and leaf services of their trafficsplits, as well as metrics for those leaf services.
Go dependencies which are only used by generated code had not previously been checked into the repo. Because `go generate` does not respect the `-mod=readonly` flag, running `bin/linkerd` will add these dependencies and dirty the local repo. This can interfere with the way version tags are generated.
To avoid this, we simply check these deps in.
Note that running `go mod tidy` will remove these again. Thus, it is not recommended to run `go mod tidy`.
Signed-off-by: Alex Leong <alex@buoyant.io>
### Summary
Changes from `bin/protoc-go.sh`
An existing [draft PR](https://github.com/linkerd/linkerd2/pull/3240) has a majority of its changes related to protobuf file
updates. In order to separate these changes out into more related components,
this PR updates the generated protobuf files so that #3240 can be rebased off
this and have a more manageable diff.
Signed-off-by: Kevin Leimkuhler <kleimkuhler@icloud.com>
### Motivation
PR #3167 introduced the tap APIService and migrated `linkerd tap` to use it.
Subsequent PRs (#3186 and #3187) updated `linkerd top` and `linkerd profile
--tap` to use the tap APIService. This PR moves the web's Go server to now also
use the tap APIService instead of the public API. It also ensures an error
banner is shown to the user when unauthorized taps fail via `linkerd top`
command in *Overview* and *Top*, and `linkerd tap` command in *Tap*.
### Details
The majority of these changes are focused around piping through the HTTP error
that occurs and making sure the error banner generated displays the error
message explaining to view the tap RBAC docs.
`httpError` is now public (`HTTPError`) and the error message generated is short
enough to fit in a control frame (explained [here](https://github.com/linkerd/linkerd2/blob/kleimkuhler%2Fweb-tap-apiserver/web/srv/api_handlers.go#L173-L175)).
### Testing
The error we are testing for only occurs when the linkerd-web service account is
not authorzied to tap resources. Unforutnately that is not the case on Docker
For Mac (assuming that is what you use locally), so you'll need to test on a
different cluster. I chose a GKE cluster made through the GKE console--not made
through cluster-utils because it adds cluster-admin.
Checkout the branch locally and `bin/docker-build` or `ares-build` if you have
it setup. It should produce a linkerd with the version `git-04e61786`. I have
already pushed the dependent components, so you won't need to `bin/docker-push
git-04e61786`.
Install linkerd on this GKE cluster and try to run `tap` or `top` commands via
the web. You should see the following errors:
### Tap
### Top
Signed-off-by: Kevin Leimkuhler <kleimkuhler@icloud.com>
PR #3154 introduced an `l5d-require-id` header to Tap requests. That
header string was constructed based on the TapByResourceRequest, which
includes 3 notable fields (type, name, namespace). For namespace-level
requests (via commands like `linkerd tap ns linkerd`), type ==
`namespace`, name == `linkerd`, and namespace == "". This special casing
for namespace-level requests yielded invalid `l5d-require-id` headers,
for example: `pd-sa..serviceaccount.identity.linkerd.cluster.local`.
Fix `l5d-require-id` string generation to account for namespace-level
requests. The bulk of this change is tap unit test updates to validate
the fix.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Refactor proxy injection to use Helm charts
Fixes#3128
A new chart `/charts/patch` was created, that generates the JSON patch
payload that is to be returned to the k8s API when doing the injection
through the proxy injector, and it's also leveraged by the `linkerd
inject --manual` CLI.
The VFS was used by `linkerd install` to access the old chart under
`/chart`. Now the proxy injection also uses the Helm charts to generate
the JSON patch (see above) so we've moved the VFS from `cli/static` to a
new common place under `/pkg/charts/static`, and the new root for the VFS is
now `/charts`.
`linkerd install` hasn't yet migrated to use the new charts (that'll
happen in #3127), so the only change in that regard was the creation of
`/charts/chart` which is a symlink pointing to `/chart` that
`install.go` now uses, so that the VFS contains both the old and new
charts, as a temporary measure.
You can see that `/bin/Dockerfile-bin`, `/controller/Dockerfile` and
`/bin/build-cli-bin` do now `go generate` pointing to the new location
(and the `go generate` annotation was moved from `/cli/main.go` to
`pkg/charts/static/templates.go`).
The symlink trick doesn't work when building the binaries through
Docker, so `/bin/Dockerfile-bin` replaces the symlink with an actual
copy of `/chart`.
Also note that in `/controller/Dockerfile` we now need to include the
`prod` tag in `go install` like we do in `/bin/Dockerfile-bin` so that
the proxy injector does use the VFS instead of the local file system.
- The common logic to parse a chart has been moved from `install.go` to
`/pkg/charts/util.go`.
- The special ENV var in the proxy for "outbound router capacity" that
only applies to the Prometheus pod is now handled directly in the proxy
partial and all the associated go code could be removed.
- The `patch.go` lib for generating the JSON patch in go along
with its tests `patch_test.go` are no longer needed.
- Lots of functions in `/pkg/inject/inject.go` got removed/simplified
with their logic being moved into the charts themselves. As a
consequence lots of things in `inject_test.go` became irrelevant.
- Moved `template-values.go` from `/pkg/inject` to `pkg/charts` as that
contains the go structs representation of the chart variables that
will be leveraged in #3127.
Don't forget to run `/bin/helm.sh` whenever you make changes to charts
;-)
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
The `/apis/tap.linkerd.io/v1alpha1` endpoint on the Tap APIServer
included tap resource/subresource pairs, such as `deployments/tap` and
`pods/tap`, but did not include the parent resources, such as
`deployments` and `pods`. This broke commands like `kubectl auth can-i`,
which expect the parent resource to exist.
Introduce parent resources for all tap-able subresources. Concretely, it
fixes this class of command:
```
$ kubectl auth can-i watch deployments.tap.linkerd.io/linkerd-grafana \
--subresource=tap -n linkerd --as siggy@buoyant.io
Warning: the server doesn't have a resource type 'deployments' in group 'tap.linkerd.io'
no - no RBAC policy matched
```
Fixed:
```
$ kubectl auth can-i watch deployments.tap.linkerd.io/linkerd-grafana \
--subresource=tap -n linkerd --as siggy@buoyant.io
yes
```
Additionally, when SubjectAccessReviews fail, return a 403 rather than
500.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The Tap Service enabled tapping of any meshed pod, regardless of user
privilege.
This change introduces a new Tap APIService. Kubernetes provides
authentication and authorization of Tap requests, and then forwards
requests to a new Tap APIServer, which implements a Kubernetes
aggregated APIServer. The Tap APIServer authenticates the client TLS
from Kubernetes, and authorizes the user via a SubjectAccessReview.
This change also modifies the `linkerd tap` command to make requests
against the new APIService.
The Tap APIService implements these Kubernetes-style endpoints:
POST /apis/tap.linkerd.io/v1alpha1/watch/namespaces/:ns/tap
POST /apis/tap.linkerd.io/v1alpha1/watch/namespaces/:ns/:res/:name/tap
GET /apis
GET /apis/tap.linkerd.io
GET /apis/tap.linkerd.io/v1alpha1
GET /healthz
GET /healthz/log
GET /healthz/ping
GET /metrics
GET /openapi/v2
GET /version
Users authorize to the new `tap.linkerd.io/v1alpha1` via RBAC. Only the
`watch` verb is supported. Access is also available via subresources
such as `deployments/tap` and `pods/tap`.
This change introduces the following resources into the default Linkerd
install:
- Global
- APIService/v1alpha1.tap.linkerd.io
- ClusterRoleBinding/linkerd-linkerd-tap-auth-delegator
- `linkerd` namespace:
- Secret/linkerd-tap-tls
- `kube-system` namespace:
- RoleBinding/linkerd-linkerd-tap-auth-reader
Tasks not covered by this PR:
- `linkerd top`
- `linkerd dashboard`
- `linkerd profile --tap`
- removal of the unauthenticated tap controller
Fixes#2725, #3162, #3172
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Similar to `kubectl --as`, global flag across all linkerd subcommands
which sets a `ImpersonationConfig` in the Kubernetes API config.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
### Summary
In order for Pods' tap servers to start authorizing tap clients, the tap
controller must open TLS connections so that it can identity itself to the
server.
This change introduces the use of `l5d-require-id` header on outbound tap
requests.
### Details
When tap requests are made by the tap controller, the `Authority` header is an
IP address. The proxy does not attempt to do service discovery on such requests
and therefore the connection is over plaintext. By introducing the
`l5d-require-id` header the proxy can require a server name on the connection.
This allows the tap controller to identity itself as the client making tap
requests. The name value for the header can be made from the Pod Spec and tap
request, so the change is rather minimal.
#### Proxy Changes
* Update h2 to v0.1.26
* Properly fall back in the dst_router (linkerd/linkerd2-proxy#291)
### Testing
Unit tests for the header have not been added mainly because [no test
infrastructure currently exists](065c221858/controller/tap/server_test.go (L241)) to mock proxy requests. After talking with
@siggy a little about this, it makes to do in a separate change at some point
when behavior like this cannot be reliably tested through integration tests
either.
Integration tests do test this well, and will continue to do once
linkerd/linkerd2-proxy#290 lands.
Signed-off-by: Kevin Leimkuhler <kleimkuhler@icloud.com>
Fixes https://github.com/linkerd/linkerd2/issues/2800#issuecomment-513740498
When the Linkerd proxy sends a query for a Kubernetes external name service to the destination service, the destination service returns `NoEndpoints: exists=false` because an external name service has no endpoints resource. Due to a change in the proxy's fallback logic, this no longer causes the proxy to fallback to either DNS or SO_ORIG_DST and instead fails the request. The net effect is that Linkerd fails all requests to external name services.
We change the destination service to instead return `InvalidArgument` for external name services. This causes the proxy to fallback to SO_ORIG_DST instead of failing the request.
Signed-off-by: Alex Leong <alex@buoyant.io>
The destination service's endpoints watcher assumed every `Endpoints`
object contained a `TargetRef`. This field is optional, and in cases
such as the default `ep/kubernetes` object, `TargetRef` is nil, causing
a nil pointer dereference.
Fix endpoints watcher to check for `TargetRef` prior to dereferencing.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The repo relied on `dep` for managing Go dependencies. Go 1.11 shipped
with Go modules support. Go 1.13 will be released in August 2019 with
module support enabled by default, deprecating GOPATH.
This change replaces `dep` with Go modules for dependency management.
All scripts, including Docker builds and ci, should work without any dev
environment changes.
To execute `go` commands directly during development, do one of the
following:
1. clone this repo outside of `GOPATH`; or
2. run `export GO111MODULE=on`
Summary of changes:
- Docker build scripts and ci set `-mod=readonly`, to ensure
dependencies defined in `go.mod` are exactly what is used for the
builds.
- Dependency updates to `go.mod` are accomplished by running
`go build` and `go test` directly.
- `bin/go-run`, `bin/build-cli-bin`, and `bin/test-run` set
`GO111MODULE=on`, permitting usage inside and outside of GOPATH.
- `gcr.io/linkerd-io/go-deps` tags hashed from `go.mod`.
- `bin/update-codegen.sh` still requires running from GOPATH,
instructions added to BUILD.md.
Fixes#1488
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Fixes#3136
When the destination service sends a destination profile with a traffic split to the proxy, the override destination authorities are absolute but do no contain a trailing dot. e.g. "bar.ns.svc.cluster.local:80". However, NameAddrs which have undergone canonicalization in the proxy will include the trailing dot. When a traffic split includes the apex service as one of the overrides, the original apex NameAddr will have the trailing dot and the override will not. Since these two NameAddrs are not identical, they will go into two distinct slots in the proxy's concrete dst router. This will cause two services to be created for the same destination which will cause the stats clobbering described in the linked issue.
We change the destination service to always return absolute dst overrides including the trailing dot.
Signed-off-by: Alex Leong <alex@buoyant.io>
We add support for looking up individual pods in a stateful set with the destination service. This allows Linkerd to correctly proxy requests which address individual pods. The authority structure for such a request is `<pod-name>.<service>.<namespace>.svc.cluster.local:<port>`.
Fixes#2266
Signed-off-by: Alex Leong <alex@buoyant.io>
`linkerd check`, the web dashboard, and Grafana all perform version
checks to validate Linkerd is up to date. It's common for users to
seldom execute these codepaths. This makes it difficult to identify what
versions of Linkerd are currently in use and what environments it is
being run in, which helps prioritize testing and backports.
Introduce a `heartbeat` CronJob to the default Linkerd install. The
cronjob executes every 24 hours, starting from 5 minutes after
`linkerd install` is run.
Example check URL:
https://versioncheck.linkerd.io/version.json?
install-time=1562761177&
k8s-version=v1.15.0&
meshed-pods=8&
rps=3&
source=heartbeat&
uuid=cc4bb700-3314-426a-9f0f-ec588b9df020&
version=git-b97ee9f7
Fixes#2961
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The openAPIV3Schema validation in the ServiceProfiles CRD is very limited in what it can validate and is obviated by more sophisticated validation done by the validating admission controller. Therefore, we would like to remove the openAPIV3Schema validation to reduce the size and complexity of the CRD object.
To do so, we must also bump the version of the ServiceProfile custom resource from v1alpha1 to v1alpha2. This ensures that when the controller is upgraded, it will attempt to watch the v1alpha2 resource. If it cannot (because, for example, the controller pod started before the ServiceProfile CRD was updated and therefore the v1alpha2 version does not exist) then it will go into a crash loop backoff until it can. This essentially means that the controller will wait for the CRD to be upgraded to include v1alpha2 before it will start.
Bumping the version is necessary because if we did not, it would be possible for the controller to start before the CRD is updated (removing the validation). In this case, when the CRD is edited, the controller will lose its list watch on ServiceProfiles and will stop getting updates.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Allow custom cluster domain in destination watcher
The change relaxes the constrains of an authority requiring a
`svc.cluster.local` suffix to only require `svc` as third part.
A unit test could be added though the destination/server and endpoint
watcher already test this behaviour.
* Update proto to allow setting custom cluster domain
Update golden templates
* Allow setting custom domain in grpc, web server
* Remove cluster domain flags from web srv and public api
* Set defaultClusterDomain in validateAndBuild if none is set
Signed-off-by: Armin Buerkle <armin.buerkle@alfatraining.de>
When waiting for controller pods to be created or become ready, `linkerd check` doesn't offer any hints as to whether there has been an error (such as an ImagePullBackoff).
We add pod status to the output to make this more immediately obvious.
Fixes#2877
Signed-off-by: Alex Leong <alex@buoyant.io>
This PR improves the CLI output for `linkerd edges` to reflect the latest API
changes.
Source and destination namespaces for each edge are now shown by default. The
`MSG` column has been replaced with `Secured` and contains a green checkmark or
the reason for no identity. A new `-o wide` flag shows the identity of client
and server if known.
The `TestGetServicesFor` is flaky because it compares two slices of services which are in a non-deterministic order.
To make this deterministic, we first sort the slices by name.
Signed-off-by: Alex Leong <alex@buoyant.io>
The `linkerd routes` command gets the list of routes for a resource by checking which services that resource is a member of. If a traffic split exists, it is possible for a resource to get traffic via a service that it is not a member of. Specifically, a resource which is a member of a leaf service can get traffic to the apex service. This means that even though the resource is serving routes associated with the apex service, these will not be displayed in the `linkerd routes` command.
We update `linkerd routes` to be traffic-split aware. This means that when a traffic split exists, we consider resources which are members of a leaf service with non-zero weight to be members of the apex service for the purpose of determining which routes to display.
Signed-off-by: Alex Leong <alex@buoyant.io>
During operations with `linkerd stat` sometimes it's not clear the actual
pod status.
This commit introduces a method, to the `k8s`package, getting the pod status,
based on [`kubectl` logic](33a3e325f7/pkg/printers/internalversion/printers.go (L558-L640))
to expose the `STATUS` column for pods . Also, it changes the stat command
on the` cli` package adding a column when the resource type is a Pod.
Fixes#1967
Signed-off-by: Jonathan Juares Beber <jonathanbeber@gmail.com>
When getting pods for specific kubernetes resources, the usage of just
labels, as a selector, generates wrong outputs. Once, two resources can use
the same label selector and manage distinct pods, a new mechanism to check
pods for a given resource it's needed. More details on #2932.
This commit introduces a verification through the pod owner references
`UID`s, comparing with the given resource's. Additional logic is needed
when handling `Deployments` since it creates a `ReplicaSet` and this last
one is the actual pod's owner. No verification is done in case of
`Services`.
Signed-off-by: Jonathan Juares Beber <jonathanbeber@gmail.com>
To give better visibility into the inner workings of the kubernetes watchers in the destination service, we add some prometheus metrics.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Have `linkerd endpoints` use `Destination.Get`
Fixes#2885
We're refactoring `linkerd endpoints` so it hits
directly the `Destination.Get` endpoint, instead of relying on the
Discovery service.
For that, I've created a new `client.go` for Destination and added it to
the `APIClient` interface.
I've also added a `destinationClient` struct that mimics `tapClient`,
and whose common logic has been moved into `stream_client.go`.
Analogously, I added a `destinationServer` struct that mimics
`tapServer`.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
This PR fixes a bug in the edges command where if src_resources from two
different namespaces sent requests to the same dst_resource, the original
src_identity was overwritten.
This change implements the DstOverrides feature of the destination profile API (aka traffic splitting).
We add a TrafficSplitWatcher to the destination service which watches for TrafficSplit resources and notifies subscribers about TrafficSplits for services that they are subscribed to. A new TrafficSplitAdaptor then merges the TrafficSplit logic into the DstOverrides field of the destination profile.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Simplify port-forwarding code
Simplifies the establishment of a port-forwarding by moving the common
logic into `PortForward.Init()`
Stemmed from this
[comment](https://github.com/linkerd/linkerd2/pull/2937#discussion_r295078800)
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Have `GetOwnerKindAndName` be able to skip the cache
Refactored `GetOwnerKindAndName` so it can optionally skip the
shared informer cache and instead hit the k8s API directly.
Useful for the proxy injector, when the pod's replicaset got just
created and might not be in ready in the cache yet.
Fixes#2738
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
The patch provided by @ihcsim applies correct values for the securityContext during injection, namely: `allowPrivilegeEscalation = false`, `readOnlyRootFilesystem = true`, and the capabilities are copied from the primary container. Additionally, the proxy-init container securityContext has been updated with appropriate values.
Signed-off-by: Cody Vandermyn <cody.vandermyn@nordstrom.com>
Add support for querying TrafficSplit resources through the common API layer. This is done by depending on the TrafficSplit client bindings from smi-sdk-go.
Signed-off-by: Alex Leong <alex@buoyant.io>
This is a major refactor of the destination service. The goals of this refactor are to simplify the code for improved maintainability. In particular:
* Remove the "resolver" interfaces. These were a holdover from when our decision tree was more complex about how to handle different kinds of authorities. The current implementation only accepts fully qualified kubernetes service names and thus this was an unnecessary level of indirection.
* Moved the endpoints and profile watchers into their own package for a more clear separation of concerns. These watchers deal only in Kubernetes primitives and are agnostic to how they are used. This allows a cleaner layering when we use them from our gRPC service.
* Renamed the "listener" types to "translator" to make it more clear that the function of these structs is to translate kubernetes updates from the watcher to gRPC messages.
Signed-off-by: Alex Leong <alex@buoyant.io>
Split proxy-init into separate repo
Fixes#2563
The new repo is https://github.com/linkerd/linkerd2-proxy-init, and I
tagged the latest there `v1.0.0`.
Here, I've removed the `/proxy-init` dir and pinned the injected
proxy-init version to `v1.0.0` in the injector code and tests.
`/cni-plugin` depends on proxy-init, so I updated the import paths
there, and could verify CNI is still working (there is some flakiness
but unrelated to this PR).
For consistency, I added a `--init-image-version` flag to `linkerd
inject` along with its corresponding override config annotation.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Update helm charts to include webhooks config and TLS secret
* Update the webhooks to read the secret cert and key
* Update webhooks to not recreate config on restart
* Ensure upgrade preserve existing secrets
* Revert the change to rename the webhook configs
The renaming change breaks upgrade, where the new webhook configs conflict with
the existing ones. The older resources aren't deleted during upgrade because
they are dynamically created.
* Make the secret volume read-only
* Remove unnecessary exported getter functions
* Remove obsolete mwc and vwc templates
Signed-off-by: Ivan Sim <ivan@buoyant.io>
Adds a check to Prometheus `edges` queries to verify that data for the requested
resource type exists. Previously, if Prometheus could not find request data for the
requested resource type, it would skip that label and still return data for
other labels in the `by` clause, leading to an incorrect response.
Adds an edges command to the CLI. `linkerd edges` displays connections between resources, and Linkerd proxy identities. Currently this feature will only display edges where both the client identity and server identity are known. The next step will be to display edges for which identity is not known and/or one-sided traffic such as Prometheus and tap requests.
Support for resources opting out of tap
Implements the `linkerd inject --disable-tap` flag (although hidden pending #2811) and the config override annotation `config.linkerd.io/disable-tap`.
Fixes#2778
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
This change adds an endpoint to the public API to allow us to query Prometheus for edge data, in order to display identity information for connections between Linkerd proxies. This PR only includes changes to the controller and protobuf.
Private k8s clusters, such as the private GKE clusters offered by Google
Cloud, cannot be reached through the current API proxy method.
This commit uses the port forwarding feature already developed.
Also modify dashboard command to not fall back to ephemeral port.
Signed-off-by: Jack Price <jackprice@outlook.com>
CustomResourceDefinition parsing and retrieval is not available via
client-go's `kubernetes.Interface`, but rather via a separate
`k8s.io/apiextensions-apiserver` package.
Introduce support for CustomResourceDefintion object parsing and
retrieval. This change facilitates retrieval of CRDs from the k8s API
server, and also provides CRD resources as mock objects.
Also introduce a `NewFakeAPI` constructor, deprecating
`NewFakeClientSets`. Callers need no longer be concerned with discreet
clientsets (for k8s resources vs. CRDs vs. (eventually)
ServiceProfiles), and can instead use the unified `KubernetesAPI`.
Part of #2337, in service to multi-stage check.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Numerous codepaths have emerged that create k8s configs, k8s clients,
and make k8s api requests.
This branch consolidates k8s client creation and APIs. The primary
change migrates most codepaths to call `k8s.NewAPI` to instantiate a
`KubernetesAPI` struct from `pkg`. `KubernetesAPI` implements the
`kubernetes.Interface` (clientset) interface, and also persists a
`client-go` `rest.Config`.
Specific list of changes:
- removes manual GET requests from `k8s.KubernetesAPI`, in favor of
clientsets
- replaces most calls to `k8s.GetConfig`+`kubernetes.NewForConfig` with
a single `k8s.NewAPI`
- introduces a `timeout` param to `k8s.NewAPI`, currently only used by
healthchecks
- removes `NewClientSet` in `controller/k8s/clientset.go` in favor of
`k8s.NewAPI`
- removes `httpClient` and `clientset` from `HealthChecker`, use
`KubernetesAPI` instead
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Fixes#2720 and 2711
This changes the default behavior of `linkerd inject` to not inject the
proxy but just the `linkerd.io/inject: enabled` annotation for the
auto-injector to pick it up (regardless of any namespace annotation).
A new `--manual` mode was added, which behaves as before, injecting
the proxy in the command output.
The unit tests are running with `--manual` to avoid any changes in the
fixtures.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
The proxy-injector retrieves owner information when injecting pods. For
pods created via deployments, this requires a Pod -> ReplicaSet ->
Deployment lookup. There is a race condition where the injection happens
before the k8s informer client has indexed the new ReplicaSet.
If a ReplicaSet informer lookup initially fails, retry one time via a
get request. Also introduce logging to record the failure/retry, and
tests to validate `GetOwnerKindAndName` works with and without informer
indexing.
Fixes#2731
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* The 'linkerd-version' CLI flag is renamed to 'control-plane-version'
* Add version field to proxy config
* Add the control plane version to the global config
* Unit test for init image version
* Use more specific control plane and proxy versions in unit tests
Signed-off-by: Ivan Sim <ivan@buoyant.io>
In some non-tty environments, the `linkerd check` spinner can render
unexpected control characters.
Disable the spinner when run without a tty.
Fixes#2700
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The UUID implementation we use to generate install IDs is technically
not random enough for secure uses, which ours is not. To prevent
security scanners like SNYK from flagging this false-positive, let's
just switch to the other UUID implementation (Already in our
dependencies).
Add validation webhook for service profiles
Fixes#2075
Todo in a follow-up PRs: remove the SP check from the CLI check.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Enhance webhook unit tests by checking returned JSON patch
Also have labels/annotations added during injection to be added in order
Fixes#2560
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
The `install` command errors when the deploy target contains an existing
Linkerd deployment. The `upgrade` command is introduced to reinstall or
reconfigure the Linkerd control plane.
Upgrade works as follows:
1. The controller config is fetched from the Kubernetes API. The Public
API is not used, because we need to be able to reinstall the control
plane when the Public API is not available; and we are not concerned
about RBAC restrictions preventing the installer from reading the
config (as we are for inject).
2. The install configuration is read, particularly the flags used during
the last install/upgrade. If these flags were not set again during the
upgrade, the previous values are used as if they were passed this time.
The configuration is updated from the combination of these values,
including the install configuration itself.
Note that some flags, including the linkerd-version, are omitted
since they are stored elsewhere in the configurations and don't make
sense to track as overrides..
3. The issuer secrets are read from the Kubernetes API so that they can
be re-used. There is currently no way to reconfigure issuer
certificates. We will need to create _another_ workflow for
updating these credentials.
4. The install rendering is invoked with values and config fetched from
the cluster, synthesized with the new configuration.
When installing Linkerd, a user may override default settings, or may
explicitly configure defaults. Consider install options like `--ha
--controller-replicas=4` -- the `--ha` flag sets a new default value for
the controller-replicas, and then we override it.
When we later upgrade this cluster, how can we know how to configure the
cluster?
We could store EnableHA and ControllerReplicas configurations in the
config, but what if, in a later upgrade, the default value changes? How
can we know whether the user specified an override or just used the
default?
To solve this, we add an `Install` message into a new config.
This message includes (at least) the CLI flags used to invoke
install.
upgrade does not specify defaults for install/proxy-options fields and,
instead, uses the persisted install flags to populate default values,
before applying overrides from the upgrade invocation.
This change breaks the protobuf compatibility by altering the
`installation_uuid` field introduced in 9c442f6885.
Because this change was not yet released (even in an edge release), we
feel that it is safe to break.
Fixes https://github.com/linkerd/linkerd2/issues/2574
Performing this check earlier helps to separate the specialized logic to the CLI
and webhook.
Any subsequent modification of this check logic to support config override of
existing meshed workload will be confined to the relevant component.
The shared lib can then focus only on config overrides.
Signed-off-by: Ivan Sim <ivan@buoyant.io>
When reading a Linkerd configuration, we cannot determine whether
auto-inject should be configured.
This change adds auto-inject configuration to the global config
structure. Currently, this configuration is effectively boolean,
determined by the presence of an empty value (versus a null).
* Include the DisableExternalProfile option even if it's 'false'. The override logic depends on this option to assign different profile suffix.
* Check for proxy and init image overrides even when registry option is empty
* Append the config annotations to the pod's meta before creating the patch. This ensures that any configs provided via the CLI options are persisted as annotations before the configs override.
* Persist linkerd version CLI option
Signed-off-by: Ivan Sim <ivan@buoyant.io>
Have the Webhook react to pod creation/update only
This was already working almost out-of-the-box, just had to:
- Change the webhook config so it watches pods instead of deployments
- Grant some extra ClusterRole permissions
- Add the piece that figures what's the OwnerReference and add the label
for it
- Manually inject service account mount paths
- Readd volumes tests
Fixes#2342 and #1751
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Currently, the install UUID is regenerated each time `install` is run.
When implementing cluster upgrades, it seems most appropriate to reuse
the prior UUID, rather than generate a new one.
To this end, this change stores an "Installation UUID" in the global
linkerd config.
This change reintroduces identity hinting to the destination service.
The Get endpoint includes identities for pods that are injected with an
identity-mode of "default" and have the same linkerd control plane.
A `serviceaccount` label is now also added to destination response
metadata so that it's accessible in prometheus and tap.
The introduction of identity in 0626fa37 created new state in the
control plane's configuration that must be considered when re-installing
the control plane or when injecting pods.
This change alters `install` to fail if it would seem to conflict with
an existing installation. This behavior may be disabled with the
`--ignore-cluster` flag.
Furthermore, `inject` now _requires_ that it can fetch a configuration
from the control plane in order to operate. Otherwise the
`--ignore-cluster` and `--disable-identity` flags must be specified.
This change does not actually instrument pods to use identity yet---it
lays the framework for proxy identity without changing the test fixture
output (besides a change to how identity HA is configured).
Fixes#2531
https://github.com/linkerd/linkerd2/pull/2521 introduces an "Identity"
controller, but there is no way to include it in linkerd installation.
This change alters the `install` flow as follows:
- An Identity service is _always_ installed;
- Issuer credentials may be specified via the CLI;
- If no Issuer credentials are provided, they are generated each time `install` is called.
- Proxies are NOT configured to use the identity service.
- It's possible to override the credential generation logic---especially
for tests---via install options that can be configured via the CLI.
The new proxy has changed its configuration as follows:
- `LISTENER` urls are now `LISTEN_ADDR` addresses;
- `CONTROL_URL` is now `DESTINATION_SVC_ADDR`;
- `*_NAMESPACE` vars are no longer needed;
- The `PROXY_ID` is now the `DESTINATION_CONTEXT`;
- The "metrics" port is now the "admin" port, since it serves more than
just metrics;
- A readiness probe now checks a dedicated /ready endpoint eagerly.
Identity injection is **NOT** configured by this branch.
This change introduces a new Identity service implementation for the
`io.linkerd.proxy.identity.Identity` gRPC service.
The `pkg/identity` contains a core, abstract implementation of the service
(generic over both the CA and (Kubernetes) Validator interfaces).
`controller/identity` includes a concrete implementation that uses the
Kubernetes TokenReview API to validate serviceaccount tokens when
issuing certificates.
This change does **NOT** alter installation or runtime to include the
identity service. This will be included in a follow-up.
The proxy's TLS implementation has changed to use a new _Identity_ controller.
In preparation for this, the `--tls=optional` CLI flag has been removed
from install and inject; and the `ca` controller has been deleted. Metrics
and UI treatments for TLS have **not** been removed, as they will continue to
be valuable for the new Identity system.
With the removal of the old identity scheme, the Destination service's proxy
ID field is now set with an opaque string (e.g. `ns:emojivoto`) to enable
locality awareness.
* Defined the config annotations as new constants in labels.go
* Introduced the getOverride() functions to override configs
* Introduced new accessors to abstract with type casting
Signed-off-by: Ivan Sim <ivan@buoyant.io>
linkerd/linkerd2#1721 introduced a `--single-namespace` install flag,
enabling the control-plane to function within a single namespace. With
the introduction of ServiceProfiles, and upcoming identity changes, this
single namespace mode of operation is becoming less viable.
This change removes the `--single-namespace` install flag, and all
underlying support. The control-plane must have cluster-wide access to
operate.
A few related changes:
- Remove `--single-namespace` from `linkerd check`, this motivates
combining some check categories, as we can always assume cluster-wide
requirements.
- Simplify the `k8s.ResourceAuthz` API, as callers no longer need to
make a decision based on cluster-wide vs. namespace-wide access.
Components either have access, or they error out.
- Modify the web dashboard to always assume ServiceProfiles are enabled.
Reverts #1721
Part of #2337
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
## Problem
When an object has no previous route metrics, we do not generate a table for
that object.
The reasoning behind this was for reducing output of the following command:
```
$ linkerd routes deploy --to deploy/foo
```
For each deployment object, if it has no previous traffic to `deploy/foo`, then
a table would not be generated for it.
However, the behavior we see with that indicates there is an error even when a
Service Profile is installed:
```
$ linkerd routes deploy deploy/foo
Error: No Service Profiles found for selected resources
```
## Solution
Always generate a stat table for the queried resource object.
## Validation
I deployed [booksapp](https://github.com/buoyantIO/booksapp) with the `traffic`
deployment removed and Service Profiles installed.
Without the fix, `linkerd routes deploy/webapp` displays an error because there
has been no traffic to `deploy/webapp` without the `traffic` deployment.
With the fix, the following output is generated:
```
ROUTE SERVICE SUCCESS RPS LATENCY_P50 LATENCY_P95 LATENCY_P99
GET / webapp 0.00% 0.0rps 0ms 0ms 0ms
GET /authors/{id} webapp 0.00% 0.0rps 0ms 0ms 0ms
GET /books/{id} webapp 0.00% 0.0rps 0ms 0ms 0ms
POST /authors webapp 0.00% 0.0rps 0ms 0ms 0ms
POST /authors/{id}/delete webapp 0.00% 0.0rps 0ms 0ms 0ms
POST /authors/{id}/edit webapp 0.00% 0.0rps 0ms 0ms 0ms
POST /books webapp 0.00% 0.0rps 0ms 0ms 0ms
POST /books/{id}/delete webapp 0.00% 0.0rps 0ms 0ms 0ms
POST /books/{id}/edit webapp 0.00% 0.0rps 0ms 0ms 0ms
[DEFAULT] webapp 0.00% 0.0rps 0ms 0ms 0ms
```
Closes#2328
Signed-off-by: Kevin Leimkuhler <kevinl@buoyant.io>
Manual and auto injection was logging the full patch JSON at the `Info`
level.
Modify injection to log the object type and name at the `Info` level,
and the full patch at the `Debug` level.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
linkerd/linkerd2#2428 modified SelfSubjectAccessReview behavior to no
longer paper-over failed ServiceProfile checks, assuming that
ServiceProfiles will be required going forward. There was a lingering
ServiceProfile check in the web's startup that started failing due to
this change, as the web component does not have (and should not need)
ServiceProfile access. The check was originally implemented to inform
the web component whether to expect "single namespace" mode or
ServiceProfile support.
Modify the web's initialization to always expect ServiceProfile support.
Also remove single namespace integration test
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
linkerd/linkerd2#2349 removed the `--single-namespace` flag, in favor of
runtime detection of cluster vs. namespace access, and also
ServiceProfile availability. This maintained control-plane support for
running in these two states.
This change requires control-plane components have cluster-wide
Kubernetes API access and ServiceProfile availability, and will error
out if not. Once #2349 merges, stage 1 install will be a requirement for
a successful stage 2 install.
Part of #2337
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Changed the protobuf definition to take out destinationApiPort entirely
* Store destinationAPIPort as a constant in pkg/inject.go
Fixes#2351
Signed-off-by: Aditya Sharma <hello@adi.run>
This ensures that the MWC always picks up the latest config template during version upgrade.
The removed `update()` method and RBAC permissions are superseded by @2163.
Signed-off-by: Ivan Sim <ivan@buoyant.io>
We were depending on an untagged version of prometheus/client_golang
from Feb 2018.
This bumps our dependency to v0.9.2, from Dec 2018.
Also, this is a prerequisite to #1488.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
- Created the pkg/inject package to hold the new injection shared lib.
- Extracted from `/cli/cmd/inject.go` and `/cli/cmd/inject_util.go`
the core methods doing the workload parsing and injection, and moved them into
`/pkg/inject/inject.go`. The CLI files should now deal only with
strictly CLI concerns, and applying the json patch returned by the new
lib.
- Proceeded analogously with `/cli/cmd/uninject.go` and
`/pkg/inject/uninject.go`.
- The `InjectReport` struct and helping methods were moved into
`/pkg/inject/report.go`
- Refactored webhook to use the new injection lib
- Removed linkerd-proxy-injector-sidecar-config ConfigMap
- Added the ability to add pod labels and annotations without having to
specify the already existing ones
Fixes#1748, #2289
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
As described in #2217, the controller returns TLS identities for results even
when the destination pod may not be able to participate in identity
requester: specifically, the other pod may not have the same controller
namespace or it may not be injected with identity.
This change introduces a new annotation, linkerd.io/identity-mode that is set
when injecting pods (via both CLI and webhook). This annotation is always
added.
The destination service now only returns TLS identities when this annotation
is set to optional on a pod and the destination pod uses the same controller.
These semantics are expected to change before the 2.3 release.
Fixes#2217
Previously, the update-handling logic was spread across several very
small functions that were only called within this file. I've
consolidated this logic into endpointListener.Update so that all of the
debug logging can be instrumented in one place without having to iterate
over lists multiple times.
Also, I've fixed the formatting of IP addresses in some places.
Logs now look as follows:
msg="Establishing watch on endpoint linkerd-prometheus.linkerd:9090" component=endpoints-watcher
msg="Subscribing linkerd-prometheus.linkerd:9090 exists=true" component=service-port id=linkerd-prometheus.linkerd target-port=admin-http
msg="Update: add=1; remove=0" component=endpoint-listener namespace=linkerd service=linkerd-prometheus
msg="Update: add: addr=10.1.1.160; pod=linkerd-prometheus-7bbc899687-nd9zt; addr:<ip:<ipv4:167838112 > port:9090 > weight:1 metric_labels:<key:\"control_plane_ns\" value:\"linkerd\" > metric_labels:<key:\"deployment\" value:\"linkerd-prometheus\" > metric_labels:<key:\"pod\" value:\"linkerd-prometheus-7bbc899687-nd9zt\" > metric_labels:<key:\"pod_template_hash\" value:\"7bbc899687\" > protocol_hint:<h2:<> > " component=endpoint-listener namespace=linkerd service=linkerd-prometheus
The control-plane components relied on a `--single-namespace` param,
passed from `linkerd install` into each individual component, to
determine which namespaces they were authorized to access, and whether
to support ServiceProfiles. This command-line flag was redundant given
the authorization rules encoded in the parent `linkerd install` output,
via [Cluster]Role[Binding]s.
Modify the control-plane components to query Kubernetes at startup to
determine which namespaces they are authorized to access, and whether
ServiceProfile support is available. This allows removal of the
`--single-namespace` flag on the components.
Also update `bin/test-cleanup` to cleanup the ServiceProfile CRD.
TODO:
- Remove `--single-namespace` flag on `linkerd install`, part of #2164
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
goconst finds repeated strings that could be replaced by a constant:
https://github.com/jgautheron/goconst
Part of #217
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Adds a flag, tcp_stats to the StatSummary request, which queries prometheus for TCP stats.
This branch returns TCP stats at /api/tps-reports when this flag is true.
TCP stats are now displayed on the Resource Detail pages.
The current queried TCP stats are:
tcp_open_connections
tcp_read_bytes_total
tcp_write_bytes_total
gosimple is a Go linter that specializes in simplifying code
Also fix one spelling error in `cred_test.go`
Part of #217
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Also, some protobuf updates:
* Rename `api_port` to match recent changes in CLI code.
* Remove the `cni` message because it won't be used.
* Remove `registry` field from proto types. This helps to avoid having to workaround edge cases like fully-qualified image name in different format, and overriding user-specified Linkerd version etc.
Signed-off-by: Ivan Sim <ivan@buoyant.io>
In preparation for creating an Identity service that can chain off of an
existing CA, it's necessary to both (1) be able to create an
intermediate CA that can be used by the identity service and (2) be able
to load a CA from existing key material.
This changes the public API of the `tls` package to deal in actual key
types (rather than opaque blobs) and provides a set of helpers that can
be used to convert these credentials between common formats.
Define the global and proxy configs protobuf types that will be used by CLI install, inject and the proxy-injector.
Signed-off-by: Ivan Sim <ivan@buoyant.io>
The control-plane's clients, specifically the Kubernetes clients, did
not provide telemetry information.
Introduce a `prometheus.ClientWithTelemetry` wrapper to instrument
arbitrary clients. Apply this wrapper to Kubernetes clients.
Fixes#2183
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Up until now, the proxy-api controller service has been the sole service
that the proxy communicates with, implementing the majoriry of the API
defined in the `linkerd2-proxy-api` repo. But this is about to change:
linkerd/linkerd2-proxy-api#25 introduces a new Identity service; and
this service must be served outside of the existing proxy-api service
in the linkerd-controller deployment (so that it may run under a
distinct service account).
With this change, the "proxy-api" name becomes less descriptive. It's no
longer "the service that serves the API for the proxy," it's "the
service that serves the Destination API to the proxy." Therefore, it
seems best to bite the bullet and rename this to be the "destination"
service (i.e. because it only serves the
`io.linkerd.proxy.destination.Destination` service).
Co-authored-by: Kevin Lingerfelt <kl@buoyant.io>
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
# Problem
When a route does not specify a timeout, the proxy-api defaults to the default
timeout and logs an error:
```
time="2019-02-13T16:29:12Z" level=error msg="failed to parse duration for route POST /io.linkerd.proxy.destination.Destination/GetProfile: time: invalid duration"
```
# Solution
We now check if a route timeout is blank. If it is not set, it is set to
`DefaultRouteTimeout`. If it is set, we try to parse it into a `Duration`.
A request was made to improve logging to include the service profile and
namespace as well.
# Validation
With valid service profiles installed, edit the `.yaml` to include an invalid
`timeout`:
```
...
name: GET /
timeout: foo
```
We should now see the following errors:
```
proxy-api time="2019-02-13T22:27:32Z" level=error msg="failed to parse duration for route 'GET /' in service profile 'webapp.default.svc.cluster.local' in namespace 'default': time: invalid duration foo"
```
This error does not show up when `timeout` is blank.
Fixes#2276
Signed-off-by: Kevin Leimkuhler <kevinl@buoyant.io>
The way these tests compare the hard-coded base64-encoded JSON
patches with those generated by the proxy injector, is extremely
brittle. Changing any of the proxy configuration causes these tests
to break, even though the proxy injector itself isn't affected.
Also, the AdmissionRequest and AdmissionResponse types are "boundary
objects" that are largely irrelevant to our code.
Fixes#2201
Signed-off-by: Ivan Sim <ivan@buoyant.io>
`golangci-lint` performs numerous checks on Go code, including golint,
ineffassign, govet, and gofmt.
This change modifies `bin/lint` to use `golangci-lint`, and replaces
usage of golint and govet.
Also perform a one-time gofmt cleanup:
- `gofmt -s -w controller/`
- `gofmt -s -w pkg/`
Part of #217
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Running `linkerd routes` for some resource was returning, besides the data for the resource, additional rows for each `ExternalName` service in the namespace.
Fixes#2216
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Fixes#2077
When looking up service profiles, Linkerd always looks for the service profile objects in the Linkerd control namespace. This is limiting because service owners who wish to create service profiles may not have write access to the Linkerd control namespace.
Instead, we have the control plane look for the service profile in both the client namespace (as read from the proxy's `proxy_id` field from the GetProfiles request and from the service's namespace. If a service profile exists in both namespaces, the client namespace takes priority. In this way, clients may override the behavior dictated by the service.
Signed-off-by: Alex Leong <alex@buoyant.io>
The `linkerd check` command was doing limited validation on
ServiceProfiles.
Make ServiceProfile validation more complete, specifically validate:
- types of all fields
- presence of required fields
- presence of unknown fields
- recursive fields
Also move all validation code into a new `Validate` function in the
profiles package.
Validation of field types and required fields is handled via
`yaml.UnmarshalStrict` in the `Validate` function. This motivated
migrating from github.com/ghodss/yaml to a fork, sigs.k8s.io/yaml.
Fixes#2190
The Proxy API service lacked introspection of its internal state.
Introduce a new gRPC Discovery API, implemented by two servers:
1) Proxy API Server: returns a snapshot of discovery state
2) Public API Server: pass-through to the Proxy API Server
Also wire up a new `linkerd endpoints` command.
Fixes#2165
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Adds the ability to generate a service profile by running a tap for a configurable
amount of time, and using the route results from the routes seen during the tap.
e.g. `linkerd profile web --tap deploy/web -n emojivoto --tap-duration 2s`
# Problem
In order to switch Linkerd template rendering to use `.yaml` files, static
assets must be bundled in the Go binary for use by `linkerd install`.
# Solution
The solution should not affect the local development process of building and
testing.
[vfsgen](https://github.com/shurcooL/vfsgen) generates Go code that statically
implements the provided `http.FileSystem`. Paired with `go generate` and Go
[build tags](https://golang.org/pkg/go/build/), we can continue to use the
template files on disk when developing with no change required.
In `!prod` Go builds, the `cli/static/templates.go` file provides a
`http.FileSystem` to the local templates. In `prod` Go builds, `go generate
./cli` generates `cli/static/generated_templates.gogen.go` that statically
provides the template files.
When built with `-tags prod`, the executable will be built with the staticlly
generated file instead of the local files.
# Validation
The binaries were compiled locally with `bin/docker-build`. The binaries were
then tested with `bin/test-run (pwd)/target/cli/darwin/linkerd`. All tests
passed.
No change was required to successfully run `bin/go-run cli install`. No change
was required to run `bin/linkerd install`.
Fixes#2153
Signed-off-by: Kevin Leimkuhler <kevin@kleimkuhler.com>
In linkerd/linkerd2-proxy#186, the proxy supports configuration of TCP
keepalive values.
This change sets `LINKERD2_PROXY_INBOUND_ACCEPT_KEEPALIVE` and
`LINKERD2_PROXY_OUTBOUND_CONNECT_KEEPALIVE` to 10s when injecting the
proxy, so that remote connections are configured with a keepalive.
This configuration is NOT yet exposed through the CLI. This may be done
in a followup, if necessary.
Fixes#1949
Since 37ae423, deployments have been prefixed with linkerd-; however
the inject logic was not changed to take this into consideration when
constructing the controller's identity.
This means that the proxy's client to the control plane has been unable to
establish TLS'd communcation to the proxy-api. Previously, the proxy would
silently fall back to plaintext, but in master this behavior recently changed to
be stricter, so this bug will prevent the proxy from connecting to proxy-api
in any way.
* Add pod spec annotation to disable injection in CLI and auto-injector
* Remove support for linkerd.io/auto-inject label entirely
* Update based on review feedback
* Fix issue with finding the namespace of deployments applied to the default ns
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Fixes#2042
Adds a new field to service profile routes called `timeout`. Any requests to that route which take longer than the given timeout will be aborted and a 504 response will be returned instead. If the timeout field is not specified, a default timeout of 10 seconds is used.
Signed-off-by: Alex Leong <alex@buoyant.io>
Use `ca.NewCA()` for generating certs and keys for the proxy injector
- Remove from CA controller everything that dealt with the
webhook/proxy-injector
- Remove no longer needed proxy-injector volumes for 'trust-anchors' and
'webhook-secrets'
- Remove from the proxy-injector the retrieval of the trust anchor and
secrets
- tls flag during install is no longer needed for auto-inject to work
Fixes#2095 and fixes#2166
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Export RootOptions and BuildFirewallConfiguration so that the cni-plugin can use them.
* Created the cni-plugin based on istio-cni implementation
* Create skeleton files that need to be filled out.
* Create the install scripts and finish up plugin to write iptables
* Added in an integration test around the install_cni.sh and updated the script to handle the case where it isn't the only plugin. Removed the istio kubernetes.go file in favor of pkg/k8s; initial usage of this package; found and fixed the typo in the ClusterRole and ClusterRoleBinding; found the docker-build-cni-plugin script
* Corrected an incorrect name in the docker build file for cni-plugin
* Rename linkerd2-cni to linkerd-cni
* Fixup Dockerfile and clean up code a bit as well as logging statements.
* Update Gopkg.lock after master merge.
* Update test file to remove temporary tag.
* Fixed the command to run during the test while building up the docker run.
* Added attributions to applicable files; in the test file, use a different container for each test scenario and also print the docker logs to stdout when there is an error;
* Add the --no-init-container flag to install and inject. This flag will not output the initContainer and will add an annotation assuming that the cni will be used in this case.
* Update .travis.yml to build the cni-plugin docker image before running the tests.
* Workaround golint warnings.
* Create a new command to install the linkerd-cni plugin.
* Add the --no-init-container option to linkerd inject
* Use the setup ip tables annotation during the proxy auto inject webhook prevent/allow addition of an init container; move cni-plugin tests to the integration-test section of travis
* gate the cni-plugin tests with the -integration-tests flag; remove unnecessary deployment .yaml file.
* Incorporate PR Cleanup suggestions.
* Remove the SetupIPTablesLabel annotation and use config flags and the presence of the init container to determine whether the cni-plugin writes ip tables.
* Fix a logic bug in the cni-plugin code that prevented the iptables from being written; Address PR comments; make tests pass.
* Update go deps shas
* Changed the single file install-cni plugin filename to be .conf vs .conflist; Incorporated latest PR comments around spacing with the new renderer among others.
* Fix an issue with renaming .conf to .conflist when needed.
* Renamed some of the variables to try to make it more clear what is going on.
* Address final PR comments.
* Hide cni flags for the time being.
Signed-off-by: Cody Vandermyn <cody.vandermyn@nordstrom.com>
* Update client-go to 1.13.1
Fixes#2145
* Update Dockerfile-bin with new tag
* Update all the dockerfile tags
* Clean gopkg and do not apply cluster defaults
* Update for klog
* Match existing behavior with klog
* Add klog to gopkg.lock
* Update go-deps shas
* Update klog comment
* Update comment to be a non-sentence
# Problem
In order to refactor `install` to allow for a more flexible configuration, we
should start with the format of the YAML that it renders. Using the Helm
YAML format will make it easier add flexible configuration options in the
future. Currently, the rendered template that `install` produces does not
follow this format.
# Solution
Use the internals that Helm itself uses to render an inject template that
follows the same formatting rules. Helm's `template` cmd provides a good
outline of what is needed to make Linkerd's `install` cmd work as if it was
a Chart.
# Validation
There are no new tests, but there may not be anything to test at this stage.
This is a WIP PR towards the ultimate goal of `install` allowing a more
flexible configuration.
However, `install` now uses all the Helm `template` internals and therefore
satisfies the needed properties for Helm Charts.
Signed-off-by: Kevin Leimkuhler <kevin@kleimkuhler.com>
This branch removes the `--proxy-bind-timeout` flag from the
`linkerd inject` and `linkerd install` CLI commands, and the
`LINKERD2_PROXY_BIND_TIMEOUT` environment variable from their output.
This is in preparation for removing that timeout from the proxy (as
described in #2013).
I thought it was prudent to remove this from the CLIs before removing it
from the proxy, so we can't create a situation where the CLIs produce
output that results in broken proxy containers.
Fixes#2013
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
When `GetProfiles` is called for a destination that does not have a service profile, the proxy-api service does not return any messages until a service profile is created for that service. This can be interpreted as hanging, and can make it difficult to calculate response latency metrics.
Change the behavior of the API to always return a service profile message immediately. If the service does not have a service profile, the default service profile is returned.
Signed-off-by: Alex Leong <alex@buoyant.io>
DaemonSet stats are not currently shown in the cli stat command, web ui
or grafana dashboard. This commit adds daemonset support for stat.
Update stat command's help message to reference daemonsets.
Update the public-api to support stats for daemonsets.
Add tests for stat summary and api.
Add daemonset get/list/watch permissions to the linkerd-controller
cluster role that's created using the install command.
Update golden expectation test files for install command
yaml manifest output.
Update web UI with daemonsets
Update navigation, overview and pages to list daemonsets and the pods
associated to them.
Add daemonset paths to server, and ui apps.
Add grafana dashboard for daemonsets; a clone of the deployment
dashboard.
Update dependencies and dockerfile hashes
Add DaemonSet support to tap and top commands
Fixes of #2006
Signed-off-by: Zak Knill <zrjknill@gmail.com>
Fixes#2119
When Linkerd is installed in single-namespace mode, the public-api container panics when it attempts to access watch service profiles.
In single-namespace mode, we no longer watch service profiles and return an informative error when the TopRoutes API is called.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Introduce resource selector and deprecate namespace field for ListPods
* Changes from code review
* Properly deprecate the field
* Do not check for nil
* Fix the mockProm usage
* Protoc changes revert
* Changed from code review
Signed-off-by: Alena Varkockova <varkockova.a@gmail.com>
When debugging control plane issues or issues pertaining to a linkerd proxy, it can be cumbersome to get logs from affected containers quickly.
This PR adds a new `logs` command to the Linkerd CLI to surface log lines from any container within linkerd's control plane. This feature relies heavily on [stern](https://github.com/wercker/stern), which already provides this behavior. This PR integrates this package into the Linkerd CLI to allow users to quickly retrieve logs whenever they run into issues when using Linkerd.
Signed-off-by: Dennis Adjei-Baah <dennis@buoyant.io>
Fixes#1875
This change improves the `linkerd routes` command in a number of important ways:
* The restriction on the type of the `--to` argument is lifted and any resource type can now be used. Try `--to ns/books`, `--to po/webapp-ABCDEF`, `--to au/linkerd.io`, or even `--to svc`.
* All routes for the target will now be populated in the table, even if there are no Prometheus metrics for that route.
* [UNKNOWN] has been renamed to [DEFAULT]
* The `Service/Authority` column will now list `Service` in all cases except for when an authority target is explicitly requested.
```
$ linkerd routes deploy/traffic --to deploy/webapp
ROUTE SERVICE SUCCESS RPS LATENCY_P50 LATENCY_P95 LATENCY_P99
GET / webapp 100.00% 0.5rps 50ms 180ms 196ms
GET /authors/{id} webapp 100.00% 0.5rps 100ms 900ms 980ms
GET /books/{id} webapp 100.00% 0.9rps 38ms 93ms 99ms
POST /authors webapp 100.00% 0.5rps 35ms 48ms 50ms
POST /authors/{id}/delete webapp 100.00% 0.5rps 83ms 180ms 196ms
POST /authors/{id}/edit webapp 0.00% 0.0rps 0ms 0ms 0ms
POST /books webapp 45.16% 2.1rps 75ms 425ms 485ms
POST /books/{id}/delete webapp 100.00% 0.5rps 30ms 90ms 98ms
POST /books/{id}/edit webapp 56.00% 0.8rps 92ms 875ms 975ms
[DEFAULT] webapp 0.00% 0.0rps 0ms 0ms 0ms
```
This is all made possible by a shift in the way we handle the destination resource. When we get a request with a `ToResource`, we use the k8s API to find all Services which include at least one pod belonging to that resource. We then fetch all service profiles for those services and display the routes from those serivce profiles.
This shift in thinking also precipitates a change in the TopRoutes API where we no longer need special cases for `ToAll` (which can be specified by `--to au`) or `ToAuthority` (which can be specified by `--to au/<authority>`) and instead can use a `ToResource` to handle all cases.
Signed-off-by: Alex Leong <alex@buoyant.io>
The outputs of the `check` and `inject` commands did not vary much
between successful and failed executions, and were a bit verbose and
challenging to parse.
Reorganize output of `check` and `inject` commands, to provide more
output when errors occur, and less output when successful.
Specific changes:
`linkerd check`
- visually group checks by category
- introduce `hintURL`'s, to provide doc links when checks fail
- add spinners when retrying, remove additional retry lines
- colored unicode characters to indicate success/warning/failure
`linkerd inject`
- modify default output to mirror `kubectl apply`
- only output non-successful inject reports
- support `--verbose` flag to output all inject reports
Fixes#1471, #1653, #1656, #1739
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Setup port-forwarding for linkerd dashboard command
* Output port-forward logs when --verbose flag is set
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
This is a followup branch from #2023:
- delete `proxy/client.go`, move code to `destination-client`
- move `RenderTapEvent` and stat functions from `util` to `cmd`
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Commit 1: Enable lint check for comments
Part of #217. Follow up from #1982 and #2018.
A subsequent commit will fix the ci failure.
Commit 2: Address all comment-related linter errors.
This change addresses all comment-related linter errors by doing the
following:
- Add comments to exported symbols
- Make some exported symbols private
- Recommend via TODOs that some exported symbols should should move or
be removed
This PR does not:
- Modify, move, or remove any code
- Modify existing comments
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* add securityContext with runAsUser: {{.ProxyUID}} to the various containers in the install template
* Update golden to reflect new additions
* changed to a different user id than the proxy user id
* Added a controller-uid install option
* change the port that the proxy-injector runs
* The initContainers needs to be run as the root user.
* move security contexts to container level
Signed-off-by: Cody Vandermyn <cody.vandermyn@nordstrom.com>
* Add parameter to stats API to skip retrieving Prometheus stats
Used by the dashboard to populate list of resources.
Fixes#1022
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* Prometheus queries check results were being ignored
* Refactor verifyPromQueries() to also test when no prometheus queries
should be generated
* Add test for SkipStats=true
Includes adding ability to public.GenStatSummaryResponse to not generate
basicStats
* Fix previous test
Rename snake case fields to camel case in service profile spec. This improves the way they are rendered when the `kubectl describe` command is used.
Signed-off-by: Alex Leong <alex@buoyant.io>
Add support for service profiles created on external (non-service) authorities. For example, this allows you to create a service profile named `linkerd.io` which will apply to calls made to `linkerd.io`.
This is done by changing the `LINKERD2_PROXY_DESTINATION_PROFILE_SUFFIXES` to `.` so that the proxy will attempt to lookup a service profile for any authority. We provide the `--disable-external-profiles` proxy flag to revert this behavior in case it is a problem.
We also refactor the proxy-api implementation of GetProfiles so that it does the profile lookup, regardless of if the authority looks like a Kubernetes service name or not. To simplify this, support for multiple resolves (which was unused) was removed.
Signed-off-by: Alex Leong <alex@buoyant.io>
When debugging issues, it's helpful to disable HTTP/2 upgrading to
simplify diagnostics.
This chagne adds an `enable-h2-ugprade` flag to _proxy-api_. When this
flag is set to false, the proxy-api will not suggest that meshed
endpoints are upgraded to use HTTP/2.
As a follow-up, a flag should be added to `install` to control how the
proxy-api is initialized.
We rework the routes command so that it can accept any Kubernetes resource, making it act much more similarly to the stat command.
Signed-off-by: Alex Leong <alex@buoyant.io>
We rename path to path_regex in the ServiceProfile CRD to make it clear that this field accepts a regular expression. We also take this opportunity to remove unnecessary line anchors from regular expressions now that these anchors are added in the proxy.
Signed-off-by: Alex Leong <alex@buoyant.io>
Filtering by Kubernetes job was not supported. Also filtering by any unknown
type caused a panic.
Add filtering support by Kubernetes job, with special case mapping `job` to
`k8s_job`, to not conflict with Prometheus' job label.
Fix panic when unknown type specified as a `--from` or `--to` flag.
Fix `job` label from `linkerd-proxy` overwriting Prometheus `job` label at
collection time. This caused all metrics collected by proxy sidecars in
Kubernetes jobs to be collected into an incorrect Prometheus job, rather than
the expected `linkerd-proxy` Prometheus job.
Fix `unsupported resource type` tap error message incorrectly printing the
target resource rather than the destination.
Set `--controller-log-level debug` in `install_test.go` for easier debugging.
Expose `slow-cooker`'s metrics via a k8s service in the tap integration test, to
validate proxy requests with a job as destination.
Fixes#1872
Part of #627
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
This change alters the controller's Tap service to include route labels
when translating tap events, modifies the public API to include route
metadata in responses, and modifies the tap CLI command to include
rt_ labels in tap output (when -o wide is used).
* Adjust proxy, Prometheus, and Grafana probes
High `readinessProbe.initialDelaySeconds` values delayed the controller's
readiness by up to 30s, preventing cli commands from succeeding shortly after
control plane deployment.
Decrease `readinessProbe.initialDelaySeconds` in the proxy, Prometheus, and
Grafana to the default 0s. Also change `linkerd check` controller pod ordering
to: controller, prometheus, web, grafana.
Detailed probe changes:
- proxy
- decrease `readinessProbe.initialDelaySeconds` from 10s to 0s
- prometheus
- decrease `readinessProbe.initialDelaySeconds` from 30s to 0s
- decrease `readinessProbe.timeoutSeconds` from 30s to 1s
- decrease `livenessProbe.timeoutSeconds` from 30s to 1s
- grafana
- decrease `readinessProbe.initialDelaySeconds` from 30s to 0s
- decrease `readinessProbe.timeoutSeconds` from 30s to 1s
- decrease `readinessProbe.failureThreshold` from 10 to 3
- increase `livenessProbe.initialDelaySeconds` from 0s to 30s
Fixes#1804
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Ivan Sim
Alex Leong
Tarun Pothulapati
Kevin Leimkuhler
Alejandro Pedraza
Andrew Seigner
Andrew Seigner
Bruno M. Custódio
陈谭军
arminbuerkle
Carol A. Scott
Oliver Gould
Guangming Wang
cpretzer
Jonathan Juares Beber
Cody Vandermyn
Dennis Adjei-Baah
Jack Price
Alejandro Pedraza
Kevin Lingerfelt
harsh jain
Kevin Leimkuhler
Aditya Sharma
Risha Mars
Nguyen Quang Huy
Thomas Rampelberg
Ye Ben
Cody Vandermyn
Alena Varkockova
Eliza Weisman
zak
Radu M
